Sm-g935u for t-mobile - T-Mobile Samsung Galaxy S7 Edge Questions & Answer

Hi
Has anyone tired SM-G935U for T-Mobile does wifi calling works, and video calling.

I gave it a go yesterday. I would not recommend it. It seems like it is causing issues, if you follow the thread on it. Also if you are on the July 1st security patch (the update that came out on 07/08/2016) then trying to flash the G935U firmware will softbrick your device. Either way the best way to get back to stock is to use Smart Switch and re-initialize the phone. You will lose all of your internal data either way.

ShrekOpher said:
I gave it a go yesterday. I would not recommend it. It seems like it is causing issues, if you follow the thread on it. Also if you are on the July 1st security patch (the update that came out on 07/08/2016) then trying to flash the G935U firmware will softbrick your device. Either way the best way to get back to stock is to use Smart Switch and re-initialize the phone. You will lose all of your internal data either way.
Click to expand...
Click to collapse
Ok thanks for the infor. Did wifi and video calling worked. I'll wait until G935U gets firmware update.

Are you asking about SM-G935U firmware on the SM-G935T or using the SM-G935U on the T-mobile network?

qwewqa said:
Are you asking about SM-G935U firmware on the SM-G935T or using the SM-G935U on the T-mobile network?
Click to expand...
Click to collapse
SM-G935U firmware on the SM-G935T

Didn't try with the latest FW, but when I tried installing before I constantly softbricked my phone.
Sent from my SM-G935T using Tapatalk

If you have the actual g935u device, everything works with tmobile

minhajmsd said:
Didn't try with the latest FW, but when I tried installing before I constantly softbricked my phone.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
SM-G935T is on v3 while SM-G935u is on v2 which is causing the softbrick .

Have anyone tried this recently? as of October 1st? Reports on the AT&T forum seem to suggest that it's working now.

where is the link at for the new G935U UPDATE FOR TMO

this is encouraging please keep us informed of any progress

I have the SM-G935U Olympic edition running on T-Mobile with the latest firmware PG9, Aug. 1st patch and I can see LTE+ every now and then. I do also see the option for WIFI-Calling and VOLTE. I can not verify if they worked properly but the options are there. Im not rooted because I still want Samsung Pay for now. ROM seems fast and good battery life and no T-Mobile BLOAT I was able to uninstall (yes uninstalled not disable) even the samsung email app and samsung+.

hi came version https://samsung-firmware.org/download/Samsung Galaxy S7 edge/3f48/TMB/G935UUEU4API3/G935UOYM4API3/

diligent7771 said:
hi came version https://samsung-firmware.org/download/Samsung Galaxy S7 edge/3f48/TMB/G935UUEU4API3/G935UOYM4API3/
Click to expand...
Click to collapse
It looks like the bootloader for the Unbranded version has increased. This should allow us to switch from T-mobile to U since they are now both at 4.
If you follow the release of older firmware it coincides with new bootloader revisions. If so then the AT&T, T-mobile and Unbranded version are all now at bootloader 4 which allows us to flash any one of them.
For example, if you look at the history of firmware releases for the T-mobile variant, you'll note the number has changed when the bootloader has been updated.
https://samsung-firmware.org/model/SM-G935T/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Well, I just upgraded my Tmobile version which was on v3 bootloader to the new SM-935U firmware and sure enough, it updated the bootload to v4:

U firmwares were updated and uploaded onto sammobile today with v4 bootloader, i have downloaded it and updated my phone to the U. ill post pictures in a few. i will also upload the firmware to my drive for everyone

guaneet said:
U firmwares were updated and uploaded onto sammobile today with v4 bootloader, i have downloaded it and updated my phone to the U. ill post pictures in a few. i will also upload the firmware to my drive for everyone
Click to expand...
Click to collapse
Please post!!

and firmware you can throw G935UUEU4API3 TMB can not download throw throws on Google

https://drive.google.com/drive/folders/0B3x0VW7b32-WdEtKSGNScllhT3c?usp=sharing
G935UUEU4API3 firmware! enjoys

guaneet said:
https://drive.google.com/drive/folders/0B3x0VW7b32-WdEtKSGNScllhT3c?usp=sharing
G935UUEU4API3 firmware! enjoys
Click to expand...
Click to collapse
Thank you! Thank You!
the other link keeps failing on me.

Related

Bingo! 5.1.1 update now available. (ONLY T3 rev)

The build is N910T3UVU1DOFC.
Has hit the download already! Download at Sammobile | Moderator Edit - Direct Link Removed (enjoy!)
→ Source
Moderator Edit- Please be aware of the possibility that this is not for your device. I have no way of testing, but it appears several of you are trying.
This information is correct as of 8/5/2015:
TEKHD said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source: http://androiding.how/download-t-mobile-note-4-5-1-1-firmware-n910t3uvu1dofc/
DO NOT ODIN ON N910T - REPEAT -> DO NOT ODIN ON N910T
5.1.1 is not even at "Manufacturer Development" Stage yet...
https://support.t-mobile.com/community/phones-tablets-devices/software-updates#
Click to expand...
Click to collapse
anyone try this yet?
Ain't buying it, just checked..
Not sure about 910t3 but I guess it's possible!
Good luck
Kies isn't pulling anything, COD6 is the latest it reports.
Could be an international version?
Sent from my SM-N910T using XDA Free mobile app
SM-N910T3 is the Korean variant. Do not install...
mightykc said:
SM-N910T3 is the Korean variant. Do not install...
Click to expand...
Click to collapse
Yes, just noticed and googled it, weird tho, its says tmo usa
Sent from my SM-N910T using XDA Free mobile app
well i downloaded it... should i try it?
This is wierd
Install at your own peril!
apatcas said:
well i downloaded it... should i try it?
Click to expand...
Click to collapse
I am not seeing anyone I have come to trust reporting this. Never heard of the site linked. Not saying they're lying or wrong, but I wouldn't put it on my device
KingBeef said:
I am not seeing anyone I have come to trust reporting this. Never heard of the site linked. Not saying they're lying or wrong, but I wouldn't put it on my device
Click to expand...
Click to collapse
Well it IS on SamMobile and labeled as T-Mobile USA: http://www.sammobile.com/firmwares/database/SM-N910T3/
There are actually SM-N910T, SM-N910T2, and SM-N910T3 acording to the Bluetooth SIG site: https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=25312
My guess is they are just different hardware revisions of the T-Mobile USA variant. I remember the Note 3 had at least two hardware revisions, the second one had a different display driver chip than the first one and TRWP had to build a new version for it to make the screen brightness work again.
This firmware image could be just a "common" firmware image for all three revisions.
siraltus said:
Well it IS on SamMobile and labeled as T-Mobile USA: http://www.sammobile.com/firmwares/database/SM-N910T3/
Maybe the model number is just a typo?
Click to expand...
Click to collapse
Could be? Can anyone with a sammobile account upload or does it have to come from a site admin? I am also a little surprised they don't have a post on it up.
Going to flash when I get home from work. I extracted the modem and looks like it has the "T-Mobile USA Root CA" in it as well as the following line:
N910T3UVU1DOFC 1976227 SM-N910T MDM9225M REV1.1 N910T.002
Looks good to me!
Source: http://androiding.how/download-t-mobile-note-4-5-1-1-firmware-n910t3uvu1dofc/
DO NOT ODIN ON N910T - REPEAT -> DO NOT ODIN ON N910T
5.1.1 is not even at "Manufacturer Development" Stage yet...
https://support.t-mobile.com/community/phones-tablets-devices/software-updates#
For what its worth here is the build info from COD6 vs DOFC modem.bin. It looks like they both refer to the N910T as N910T.002 and both using the Qualcomm MDM9225M baseband.
COD6 = N910TUVU1COD6 1935620 SM-N910T MDM9225M REV1.1 N910T.002
DOFC = N910T3UVU1DOFC 1976227 SM-N910T MDM9225M REV1.1 N910T.002
I've made a flashable zip of it and tried it on the n910f but didn't boot got an error with the modem. I had no issues restoring a backup though if anyone on a tmob wants to try
Sent from my SM-N910F using Tapatalk
sawdoctor said:
I've made a flashable zip of it and tried it on the n910f but didn't boot got an error with the modem. I had no issues restoring a backup though if anyone on a tmob wants to try
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Would love to give it a shot! I'm at work so can't ODIN at the moment but a zip would be great so I can try it now.
nitroxeno said:
Would love to give it a shot! I'm at work so can't ODIN at the moment but a zip would be great so I can try it now.
Click to expand...
Click to collapse
Sending you a pm now
Sent from my SM-N910F using Tapatalk
Tried to flash via Odin, and failed.
@sawdoctor, I'll give the flashable a try. Thx.
jaxenroth said:
Tried to flash via Odin, and failed.
@sawdoctor, I'll give the flashable a try. Thx.
Click to expand...
Click to collapse
The zip is failing because of the modem on the tmob as well by the looks of things. Flashing the modem.bin and non hlos.bin with odin Might get the zip to boot but I don't know
Sent from my SM-N910F using Tapatalk

[KDZ][H812][Canada] Download new firmware V20u

Hi all,
There is a new firmware for H812 (Canadian model only) - V20u.
Security patch is for March 2016
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the download link:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW6C8G7552FQAY5783448Z7/H81220u_00_0327.kdz
Enjoy
And have you got some screens from it like what is new etc?
kouzelnik3 said:
And have you got some screens from it like what is new etc?
Click to expand...
Click to collapse
Sorry, I don't have that model
Me neither and I think it's only carrier sw so not compatible with the H815 but nevermind
Thanks for reply.
Still 6.0 anyway!!
LG said that they push android 6.0.1 for the G5 first. And if not, we would have to wait for the Android N.
Still no 6.0.1 from LG...
.
MobileTechArena said:
Still no 6.0.1 from LG...
.
Click to expand...
Click to collapse
Yeah, what's up with that? My LG Watch Urbane got 6.0.1 but their flagship phone still hasn't?
Thanks will give it a try
Worked perfectly thanks
kwarwick said:
Yeah, what's up with that? My LG Watch Urbane got 6.0.1 but their flagship phone still hasn't?
Click to expand...
Click to collapse
That mythical 6.0.1
Does anyone happen to know what the baseband is for this? Been having quite the trouble with lte since I updated to this build. I went from Lp to this version via lg bridge and wonder if I missed an important baseband update with the earlier Mm.
Sent from my SM-T357W using Tapatalk
Is there OTA yet?
By the way pretty sure it is 6.0.1. LG does not seem to label the last digit. 5.1.1 was always 5.1.
Sent from my STV100-2 using Tapatalk
Which carrier is this KDZ for?
I'm on Telus and don't want to lose the telus stuff that comes with their version of the rom.
Coming from the S3, this phone is hella annoying that it keeps some data even with factory resets.
//Edit: How do you guys dump these KDZs from LG Bridge or something?
jasonzarko said:
Does anyone happen to know what the baseband is for this? Been having quite the trouble with lte since I updated to this build. I went from Lp to this version via lg bridge and wonder if I missed an important baseband update with the earlier Mm.
Sent from my SM-T357W using Tapatalk
Click to expand...
Click to collapse
So, downgraded to 20e telus and lte is fine. Upgraded again to 20u and no lte. I tried manually putting in apn and nothing still. I'm really starting to hate lg!
Sent from my SM-T357W using Tapatalk
jasonzarko said:
So, downgraded to 20e telus and lte is fine. Upgraded again to 20u and no lte. I tried manually putting in apn and nothing still. I'm really starting to hate lg!
Sent from my SM-T357W using Tapatalk
Click to expand...
Click to collapse
There's actually 4 apns on this version.
The fix was to reset to factory and I've notice two new apns I've nice seen before most likely they're for volte.
You can find the apns setting via screens hot I posted them here
https://drive.google.com/folderview?id=0B-Dyi7zHc_c1MUZzQXpKNDk0RFU
Let me know if this works and BTW this is for telus carrier the settings
r0x1 said:
There's actually 4 apns on this version.
The fix was to reset to factory and I've notice two new apns I've nice seen before most likely they're for volte.
You can find the apns setting via screens hot I posted them here
https://drive.google.com/folderview?id=0B-Dyi7zHc_c1MUZzQXpKNDk0RFU
Let me know if this works and BTW this is for telus carrier the settings
Click to expand...
Click to collapse
Lol, did that a couple days ago. Problem solved.
Sent from my LG-H812 using Tapatalk
HG G4 H812(Canada) firmwares
https://lg-firmwares.com/lg-h812-firmwares/

Switching to G935U firmware for good?

I was recently thinking to myself to flash Samsung's international firmware on my G935V. The phone's battery is terrible even in airplane mode and I think going to a non bloated ROM would be generally better. I did once have the international firmware but my phones screen started going weird and I flashed it back to the original. Of course it turned out to be a hardware issue and I got it replaced under warranty. Because this happened a day after I flashed the international firmware, I'm scared something similar might happen again. Do any of you guys run the international firmware on a daily basis on your Verizon edges? I was just wondering if it will be practical at all. Also for the one day I had the international firmware, the battery was definitely better without Verizon's crap on it. What do you guys think?
Been on the u firmware for a long time and I love it. However... If you're on Verizons most recent ota your bootloader is version 4 and you won't be able to flash the u firmware with out rooting it.
ShadowyStorm said:
Been on the u firmware for a long time and I love it. However... If you're on Verizons most recent ota your bootloader is version 4 and you won't be able to flash the u firmware with out rooting it.
Click to expand...
Click to collapse
so with the new bootloader I can flash u firmware? If so I would love to go back to u-firm
ShadowyStorm said:
Been on the u firmware for a long time and I love it. However... If you're on Verizons most recent ota your bootloader is version 4 and you won't be able to flash the u firmware with out rooting it.
Click to expand...
Click to collapse
So what would happen if I tried flashing it through Odin like the old way?
Being on the U firmware the first time was great, but over time it's degraded for new. I'm only getting up to 2 hours of SOT by 50%, as opposed to 3. Not rooted either.
I'm thinking of going to do the PG5 Verizon firmware to see how things are.
Unfortunately it won't flash. The new bootloader will block what would potentionally be an older revision or a downgrade. Currently the u firmware bootloader is Rev. 2. Verizon managed to jump to Rev. 4 with its last update potentially screwing all stock users out of using a stock unlocked debloated firmware with free tethering.
---------- Post added at 09:40 PM ---------- Previous post was at 09:38 PM ----------
Post a pic of your build version.
Excellent news. As of today the u firmware dropped an update which is on bootloader Rev 4. This is good for you guys wanting to switch and people on t mobile.
ShadowyStorm said:
Excellent news. As of today the u firmware dropped an update which is on bootloader Rev 4. This is good for you guys wanting to switch and people on t mobile.
Click to expand...
Click to collapse
I just flashed the new 935U version this morning to my verizon variant. I was getting sub-par battery life on the verizon software so I am going to try this out for a bit. Keeping it unrooted the only thing I can't install is verizon visual voicemail. I have voLTE working but there is no option for wifi or video calling as with the verizon version. Seems to be much faster overall though.
Been using U firmware since June and no issues. Have already gone through 2 updates on U without problems.
rizzo269 said:
I just flashed the new 935U version this morning to my verizon variant. I was getting sub-par battery life on the verizon software so I am going to try this out for a bit. Keeping it unrooted the only thing I can't install is verizon visual voicemail. I have voLTE working but there is no option for wifi or video calling as with the verizon version. Seems to be much faster overall though.
Click to expand...
Click to collapse
How do you know if the VoLTE is working? I installed the latest 935U firmware and i never saw the VoLTE option. I saw it only when i flashed the "Samsung_G935x_QC_Rooted_BOOT.TAR" via ODIN when i was trying to root. I also want to keep the latest 935U firmware and as far as possible avoid root.
I have the toggle in settings and confirmed it by placing a call.
Sent from my SM-G935U using Tapatalk
rizzo269 said:
I have the toggle in settings and confirmed it by placing a call.
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
You get to see the toggle before rooting ? Without any other mods to the 935U firmware ?
kapil4wm said:
You get to see the toggle before rooting ? Without any other mods to the 935U firmware ?
Click to expand...
Click to collapse
This is what I see under mobile network settings. I am not rooted and never have been.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935U using Tapatalk
rizzo269 said:
This is what I see under mobile network settings. I am not rooted and never have been. View attachment 3903889
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
I was looking at the wrong place... thx for the screenshot. it helped.
Hey its friday afternoon and am all ready for the weekend
kapil4wm said:
I was looking at the wrong place... thx for the screenshot. it helped.
Hey its friday afternoon and am all ready for the weekend
Click to expand...
Click to collapse
No worries, glad it helped. Cheers to the weekend for sure.
Sent from my SM-G935U using Tapatalk

T-Mobile Firmware for AT&T

Hi guys,
I wanted to make sure if this version is compatible with my AT&T S7 edge (SM-G935A)
Here is the link: http://forum.xda-developers.com/tmobile-s7-edge/how-to/odin-apk1-tmobile-tmbg935ttmb4apk1-t3494724
Can you guys tell me if this works fine on the att phone? I have bootloader version 2. I'm getting tired of the ATT version that blocks the cool features (e.g. Identify unsaved callers)
Also, can you guys tell me which version of Odin works best with this firmware (don't want to get fail and brick my phone)
I hate to say this, but I think my phone stopped receiving updates from ATT (because I don't want to keep changing my sim card, my sim card is T-Mobile(Metro) and I read the threads that said that in order to update they have to put the ATT sim card. I don't want to do that since my sim card keep coming out of the card (atleast I got in the tray and works)
Anyways, can someone confirm this is compatible with the firmware?
Thanks
kylelopez20 said:
Hi guys,
I wanted to make sure if this version is compatible with my AT&T S7 edge (SM-G935A)
Here is the link: http://forum.xda-developers.com/tmobile-s7-edge/how-to/odin-apk1-tmobile-tmbg935ttmb4apk1-t3494724
Can you guys tell me if this works fine on the att phone? I have bootloader version 2. I'm getting tired of the ATT version that blocks the cool features (e.g. Identify unsaved callers)
Also, can you guys tell me which version of Odin works best with this firmware (don't want to get fail and brick my phone)
I hate to say this, but I think my phone stopped receiving updates from ATT (because I don't want to keep changing my sim card, my sim card is T-Mobile(Metro) and I read the threads that said that in order to update they have to put the ATT sim card. I don't want to do that since my sim card keep coming out of the card (atleast I got in the tray and works)
Anyways, can someone confirm this is compatible with the firmware?
Thanks
Click to expand...
Click to collapse
Yes you should be fine. I did use this particular on my 935a ATT S7 Edge. Only thing that did not work on my behalf was Wifi Calling. Since you have a TMobile sim in an ATT phone it could work. The Odin I used was Prince's Odin in the Root thread.
marcusva79 said:
Yes you should be fine. I did use this particular on my 935a ATT S7 Edge. Only thing that did not work on my behalf was Wifi Calling. Since you have a TMobile sim in an ATT phone it could work. The Odin I used was Prince's Odin in the Root thread.
Click to expand...
Click to collapse
Thanks! Well, first of all, my bootloader version is 2. Should I download the T-Mobile firmware bootloader v2 or the latest one(v4)?
One question, whats the difference between home_csc and csc? Is it wiping data? Does using home_csc works with it? If not, I am fine to try csc version.
Honestly I have to check when I get home. Currently at work still. With bootloader you can always upgrade but you can NEVER downgrade. It would result in a fail.
marcusva79 said:
Honestly I have to check when I get home. Currently at work still. With bootloader you can always upgrade but you can NEVER downgrade. It would result in a fail.
Click to expand...
Click to collapse
Okay, what do you think firmware is better? 935U or 935T? Do I have to enable OEM unlock? Do I have to turn on startup secure?
marcusva79 said:
The Odin I used was Prince's Odin in the Root thread.
Click to expand...
Click to collapse
thank you. this Odin works ! I have tried to flash tmobile on att s7 edge using the other Odin multi-times, always getting Fail sha256 is invalid
Yes! It works! Wi-Fi calling works too! No problem with everything. I see slightly improvements on speed. No problems at all.
kylelopez20 said:
Yes! It works! Wi-Fi calling works too! No problem with everything. I see slightly improvements on speed. No problems at all.
Click to expand...
Click to collapse
WiFi Calling calling works for you? I doesn't work for my I'm on the latest tmobile firmware.
Sent from my SM-G935T using Tapatalk
dogredwing1 said:
WiFi Calling calling works for you? I doesn't work for my I'm on the latest tmobile firmware.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
It does. It appears to be working. It shows on my top notification status bar.
will this allow me to flash back to an at&t firmware if need be?
dray said:
will this allow me to flash back to an at&t firmware if need be?
Click to expand...
Click to collapse
Yes, but latest ATT version, the bootloader are the same. v4
kylelopez20 said:
Yes! It works! Wi-Fi calling works too! No problem with everything. I see slightly improvements on speed. No problems at all.
Click to expand...
Click to collapse
What BL version did you flash? 2 or 4
dray said:
What BL version did you flash? 2 or 4
Click to expand...
Click to collapse
Version 4, (second of the latest)
kylelopez20 said:
Version 4, (second of the latest)
Click to expand...
Click to collapse
ok so I can flash from ATT BL v2 to Tmobile bl v4? TIA!
Here what mine shows when I turn on WiFi Calling so I'm pretty sure it won't work using a Att sim.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935T using Tapatalk
It works because it uses T-Mobile SIM (Metro) and I have experienced Wi-Fi Calling on my different phones.

Can someone send me in the right direction - G930V --> G930U?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried multiple zips to try to get the U software on my phone but always ends up not booting. It will show galaxy S7 and then boot straight back into recovery.
Can someone please provide a link to the exact download files I need. Sorry to start a thread over this. I'm just having a hard time finding the correct files. Thanks in advanced.
Anyone?
It should be as (simple) as..
Rooting your phone -> https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 (this won't trip KNOX)
Downloading the proper firmware from SamMobile -> https://www.sammobile.com/firmwares/database/SM-G930U/
Flash the firmware via odin (you can use the same method found here: https://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065)
Profit
I just did this recently to switch from SM-G930R4 to SM-G930V
Note, you will lose all data on the phone if you try this.
James.Markham0757 said:
I have tried multiple zips to try to get the U software on my phone but always ends up not booting. It will show galaxy S7 and then boot straight back into recovery.
Can someone please provide a link to the exact download files I need. Sorry to start a thread over this. I'm just having a hard time finding the correct files. Thanks in advanced.
Click to expand...
Click to collapse
Go to Updato.com and get the newest SM-930U firmware from January and flash via Odin. The 930U firmware you flash must have a bootloader the as or newer than your current firmware or it will not boot. You do not have to root to update via Odin.
nrage23 said:
Go to Updato.com and get the newest SM-930U firmware from January and flash via Odin. The 930U firmware you flash must have a bootloader the as or newer than your current firmware or it will not boot. You do not have to root to update via Odin.
Click to expand...
Click to collapse
Thanks. I actually already got this done. The problem is I was using the CSC HOME file instead of the Other one. Thank for the reply tho! Maybe it will help someone else!
Just curious what the benefits of converting your Verizon phone to the U version is?
scadilla said:
Just curious what the benefits of converting your Verizon phone to the U version is?
Click to expand...
Click to collapse
Less boat , no Verizon boot animation, and my favorite the spam dialer Verizon thought was a good idea to remove. I like to think of the U as pure Samsung vs the Verizon gimped software.
JediDru said:
Less boat , no Verizon boot animation, and my favorite the spam dialer Verizon thought was a good idea to remove. I like to think of the U as pure Samsung vs the Verizon gimped software.
Click to expand...
Click to collapse
Is the bootloader unlocked? Is there any down side? LTE performance etc? Can this still be done if I loaded the Nougat beta on my G930V? Thanks in advance.
nrage23 said:
Go to Updato.com and get the newest SM-930U firmware from January and flash via Odin. The 930U firmware you flash must have a bootloader the as or newer than your current firmware or it will not boot. You do not have to root to update via Odin.
Click to expand...
Click to collapse
JediDru said:
Less boat , no Verizon boot animation, and my favorite the spam dialer Verizon thought was a good idea to remove. I like to think of the U as pure Samsung vs the Verizon gimped software.
Click to expand...
Click to collapse
Also it unlocks the LTE bands Verizon has Disabled. And Disables the Hotspot Lock.
Yes jedi the built in Caller ID is deffinitly cool.
scadilla said:
Is the bootloader unlocked? Is there any down side? LTE performance etc? Can this still be done if I loaded the Nougat beta on my G930V? Thanks in advance.
Click to expand...
Click to collapse
Bootloader is locked because it is a snapdragon variant. Only downside is can think is you would have to pay your bill in store or on a PC. Lte seems the same. Yes if nougat is on. You just load up the most recent U firmware and flash over nougat in odin.
Binary Assault said:
It should be as (simple) as..
Rooting your phone -> https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 (this won't trip KNOX)
Downloading the proper firmware from SamMobile -> https://www.sammobile.com/firmwares/database/SM-G930U/
Flash the firmware via odin (you can use the same method found here: https://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065)
Profit
I just did this recently to switch from SM-G930R4 to SM-G930V
Note, you will lose all data on the phone if you try this.
Click to expand...
Click to collapse
it shoudl be simple...but it failed for me in one of my two phones. now it keeps going to recovery (downloading the original firmware to reflash it). the one that worked was a SMG930VZDA (made in vietnam) while the one that didn't is a SMG930VZKA (made in korea). I hadn't updated either one from the original firmware, but not sure what firmware they came with....
so if it works, it's great, but if it fails...
I used the instructions and file in
https://forum.xda-developers.com/verizon-galaxy-s7/help/help-to-flash-930u-930v-t3432668
---------- Post added at 01:19 PM ---------- Previous post was at 12:46 PM ----------
scadilla said:
Just curious what the benefits of converting your Verizon phone to the U version is?
Click to expand...
Click to collapse
lets you use in tmobile wih wifi calling, volte, etc. it's very useful
JediDru said:
Bootloader is locked because it is a snapdragon variant. Only downside is can think is you would have to pay your bill in store or on a PC. Lte seems the same. Yes if nougat is on. You just load up the most recent U firmware and flash over nougat in odin.
Click to expand...
Click to collapse
You can still use the My Verizon app to pay, if you want to. You do lose Verizon's native VVM app, but there are workarounds to use Voice or another third-party VVM app (I personally use YouMail).
raduque said:
You can still use the My Verizon app to pay, if you want to. You do lose Verizon's native VVM app, but there are workarounds to use Voice or another third-party VVM app (I personally use YouMail).
Click to expand...
Click to collapse
Hey your right! One less hassle.
Hi everyone,
I recently purchased a new g930r4 (US Cellular) because my last samsung got stolen. Anyway, the first time I turned on the phone, I started having multiple issues (kept rebooting, unable to recognize headset, kept freezing). Then I decided to change it to the g930U firmware and I noticed a HUGE difference. I totally recommend this to anybody that has same problems I mentioned. Thanks to all the information from this post, I was able to successfully flash the firmware. Thank you all for the support! I hope this helps someone out there whos still got some doubts.
Hello, I have the SM-G930V Snapdragon variant in the US and I would really like to root it to get a custom ROM. If you wouldn't mind, I'd appreciate a reply (if you have one) to this thread I made on the topic: https://forum.xda-developers.com/verizon-galaxy-s7/help/questions-bootloader-rooting-custom-t3721109

Categories

Resources