I have a Note 4 the Enyos octa core.
Today I tried to experiment by hooking it with a AUX cable to the computer, to see if it works and connect it in the car's radio afterwards.
For my best surprise, I am hooking it into the PC, TV, Creative surround e.g. noting works. When I plug they JBL J33s they work fine.
It's like the phone is not recognizing the aux cable, though it's a standard 3.5mm aux audio cable, there is nothing special about it.
I looks like this: http://s474818768.onlinehome.us/list/Aux Cable/002.jpg
There is enough clearance, as it clicks perfectly as the earphones do, the only thing that differ is the lack of audio.
I checked the cable with multi meter and everything is fine ground/left/right
I hooked the cable to an oscilloscope, but there is no signal present.
Do you guys have any clue why this happens ??
dvd_video said:
I have a Note 4 the Enyos octa core.
Today I tried to experiment by hooking it with a AUX cable to the computer, to see if it works and connect it in the car's radio afterwards.
For my best surprise, I am hooking it into the PC, TV, Creative surround e.g. noting works. When I plug they JBL J33s they work fine.
It's like the phone is not recognizing the aux cable, though it's a standard 3.5mm aux audio cable, there is nothing special about it.
I looks like this: http://s474818768.onlinehome.us/list/Aux Cable/002.jpg
There is enough clearance, as it clicks perfectly as the earphones do, the only thing that differ is the lack of audio.
I checked the cable with multi meter and everything is fine ground/left/right
I hooked the cable to an oscilloscope, but there is no signal present.
Do you guys have any clue why this happens ??
Click to expand...
Click to collapse
replace the cable 3.5
Rajada said:
replace the cable 3.5
Click to expand...
Click to collapse
I checked it with my multimeter. All of the pins are not broken internally
Rajada said:
replace the cable 3.5
Click to expand...
Click to collapse
Turns out it was my audio system falt. They fixed it and not it works
Related
Anyone find a source for USB extension cables for the Touch Pro? I want to run a cable in my car from my touch pro mount to the center counsle where I will have the audio dongle. which will branch off to a charger and line out to my Aux in. Otherwise I have to have the exposed audio adapter and then two cables running out of that instead of the one single extension cable I want to run to the center console. Really hoping I don't have to build my own.
I suspect this will be hard to find, considering it's not just a standard mini USB cable.
I like the idea behind it though. I was thinking about the same type of thing in my car and I'm waiting on getting a couple different docks so I can see if they will fit my needs once I rip them apart.
You need an extUSB extension cable. It should be around $10-$30. Depends on where you get it from. I'm thinking try eBay/expansys-usa/htc store
Kraize said:
You need an extUSB extension cable. It should be around $10-$30. Depends on where you get it from. I'm thinking try eBay/expansys-usa/htc store
Click to expand...
Click to collapse
Been looking at all the normal sources, the problem is I need it to end in the same female plug that is in the Touch Pro (so I can plug the audio dongle into it). Having zero luck finding it.
I have to disappoint you: if you connect both the audio and the charger from your car, you'll get a loud noise because of lack of grounding in car
darfri said:
I have to disappoint you: if you connect both the audio and the charger from your car, you'll get a loud noise because of lack of grounding in car
Click to expand...
Click to collapse
Easily fixable:Ground loop Isolator http://www.crutchfield.com/p_127SNI135/PAC-SNI-1-3-5-Noise-Filter.html?search=ground+loop&tp=2653
fishzine said:
Easily fixable:Ground loop Isolator http://www.crutchfield.com/p_127SNI135/PAC-SNI-1-3-5-Noise-Filter.html?search=ground+loop&tp=2653
Click to expand...
Click to collapse
Does it work?
3in1 11 PIN ExtUSB Earphone Handsfree Adapter for HTC
Finally appeared on eBay what I was looking for a long time!!
I think that is the same that you are looking for!
http://cgi.ebay.com/3in1-11-PIN-Ext...AU_MobilePhoneAccessories&hash=item3cabfd9d0b
Now I will not have a lot of wires apparent in the dashboard of my car!
not yet tested, I just bought!
i found that with a cab, the audio dongle, and an ipod/camcorder cable you can connect your device to an external monitor. Its been said to work with the touch pro and the Fuze, but for some reason I only get audio when i plug the correct cables in and run the cab....any suggestions...i have an ipod video cable and an camcrder video cable
http://forum.xda-developers.com/showthread.php?p=4355878#post4355878
-Your answer (ie, use the right cable for the job ) is already in the 'Accessories' forum
English
The link on that page isnt in english though
Try this one then:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=130310497614
since the manufacturer did not have to abide by any iso standards for this proprietary tvout, they can cross the a/v cables any way they wish. It just turns out they went the Apple way, and so the iphone's 3.5mm av cable will work perfectly ($4-5 on amazon).
alternately, if you have the standard 3.5mm camcorder cable, you'll have to switch the colors of the rca plug order, works just fine on the Fuze. Plug in Red to Yellow input, the Yellow to the White input, the White to the Red input. From this Fuze post:
http://forum.xda-developers.com/showthread.php?t=486916
techkills said:
dont buy an ipod cable if you have a regular camcorder cable it will also work! then u can have Tv out for $0.
only thing you have to do is use the adapter that came with the Fuze plug in the cable to it and then instead of pluging in the Yellow to the Yellow and so on, you plug in Red to Yellow input, the Yellow to the White input, the White to the Red input.
=) tada.
also don't forget to download the EnableTvout.cab
you will need it.
Let me know if this works for anyone elso, it def. worked for me
Nathalie
Click to expand...
Click to collapse
Not able to...
I have a zune av cable that is identical to the ipod ones and it will not output video on my TP2 but it will do audio. i tried switching around the cables to see if it was outputing on the wrong color but it isnt. i downloaded the cab and from the programs it seems to be working but in reality it isnt doing anything other than audio. Any ideas on how to fix this other than getting the real htc cable?
same problem
i have an Ipod video out cable, and all i get is audio, even when i switch the wires around....heres the cable I have http://www.bestbuy.com/site/olspage...cable&lp=3&type=product&cp=1&id=1134703394661
michealmyers said:
i have an Ipod video out cable, and all i get is audio, even when i switch the wires around....heres the cable I have http://www.bestbuy.com/site/olspage...cable&lp=3&type=product&cp=1&id=1134703394661
Click to expand...
Click to collapse
Your Doing it WRONG!!
Please Explain
please explain to me what it is that I am doing wrong
are you using the Ext-USB converter? and plugging the 3.5mm AV cable to it?
sure am...im using the audio dongle thing that came with it and the cable posted in the link above + the cab file
Why go to all the hassle, just buy a TV out cable. Mine cost about £15 which is nothing. It's a fairly simple cable with Video on pin 6 & Video Screen on pin 8. Audio is on 7 & 11 with screen on 5 and 10. The only hassle I have now is antenna for the radio, pin 9. With this pin connected the Rhodium assumes a headset is plugged in and disables TV Out.
cable
Ya have the real deal coming in a few days. Wasnt worth waiting for a potential cab that would work.
I have a differnet question... I have the usb to rca video and 2 rca audio outputs.
When I plug it in it disables the internal speaker and I can not figure out how to get it working without unpluging the a/v cable but I do not want too..
I want to use the T2 with a 3com mini projector and use the speaker in the phone with it.. Anyway to do this, or is there a Video only cable, I looked and did not see on.
Heads up to all the audio guys out there. Listening to music as I type through my USB DAC > tube amp setup with no special setup. Just USB OTG cable to DAC.
USB Audio Out FTMFW!!!!!
(I'm on AT&T model running ARHD 9.1, not that it matters, I'm sure this feature is universal)
USB OTG to DAC? Do you have an link or pic to such cable?
edgarf28 said:
USB OTG to DAC? Do you have an link or pic to such cable?
Click to expand...
Click to collapse
Just a regular USB OTG connected through the USB cable that comes with the DAC
I have my HTC one with headphone jack to rca cables going into my tube preamp the foreplay. Then from the foreplay to my Dynaco ST70.
YouTube videos sound like garbage bags flapping in the wind.
The tube audio only people would smash my face in if they heard what YouTube sounded like on tubes. Not a good mix at all...
Sent from my HTC One using xda app-developers app
Yep, just a run of the mill standard usb OTG cable and then plug the usb cable from your DAC into it and your good. You'll get the headphone symbology in the status bar and the beats logo although beats appears to be bypassed (which is good) utilizing usb audio out.
sluflyer06 said:
Yep, just a run of the mill standard usb OTG cable and then plug the usb cable from your DAC into it and your good. You'll get the headphone symbology in the status bar and the beats logo although beats appears to be bypassed (which is good) utilizing usb audio out.
Click to expand...
Click to collapse
Is that version 1.29? I have a T-mobile HTC One with 1.27 and USB DAC wouldn't work with FiiO E7 or JH-3a.
4.3 Update broke the USB audio out session disconnect
I've got the Sprint variant. Loaded the OTA update to 4.3 and now my USB audio gets hung when I disconnect my OTG cable. If I try to plug it in and reconnect later, my handset locks up tighter than Fort Knox. I've tried a factory reset, took a trip to the Sprint repair center (where no one even knew the audio out function existed ) so I'm stuck rebooting my phone between every listening session. Complete PITA. Specifically purchased this phone to use with my Fiio Andes, and everything was great until 4.3.
Does this significantly effect battery life?
DIY adapter to use your PC headset in your android :cyclops:
You will need
- 2 female TRS
- 1 male TRRS
- Wires! I strongly recommend USB wires
Ok just weld everything... yes is simple. But how :silly:? Take a look in the pics.
"The original TRRS configuration was created by Nokia and has a pinout", from TIP to SLEEVE, "of Left Audio, Right Audio, Mic, Ground".
=====================
DIY adapter to pass audio from PC or other hardware to your android with male-to-male audio cable
You will need
- 2 female TRS
- 1 male TRRS
- Wires! I strongly recommend USB wires
- Male-to-male audio cable
- Soundabout
Ok just weld everything, everything except the MM and Soundabout ... yes is simple. But how :silly:? Just like the above but also look here first:
"Apple came along and in typical elitist fashion changed their pinout to", from TIP to SLEEVE, "Left Audio, Right Audio, Ground, Mic".
Then this adapter is exactly like the first above, but you will need change the Mic Right to Ground.
To force android to receive the input audio when you plug the male-to-male cable, you may use Soundabout.
Through this configuration you can send audio from any TRS output to your android, then the audio will be captured like a microphone.
=====================
The difference between both is only the MIC and GRND position in the TRRS male. They are switched. By mistake I switched and now I have 2 useful adapters.
BASED ON:
http://forums.androidcentral.com/sa...ultion-why-most-headsets-wont-work-print.html
http://www.splitbrain.org/blog/2010-12/16-using_your_mobile_headset_on_a_pc
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIRST OLD POST :
Hello knights.
My country are in such a chaos because of the manifest and I'm here mess around with technology... but I'm doing my part too xP.
Anyway, in the last days I was searching and testing a way to send the sound played in my computer, or other device, to my little android (codename Smultron).
With a 3.5mm cable (TRS or the one with 3 contacts) male to male, I plugged into the audio output of my Dell then plugged to my Mini, I started the app to record and... nothing.
Few days later, I used the app Soundabout and... nothing.
More few days later, I did the same thing BUT I don't put the cable until the end, I pulled out a bit, so the 3 contact of the cable stay full visible and... works! I was able do record the audio input of my laptop.
Also, with Soundabout, I was able to stream the audio from my computer to android calls!! For example, if you call me and I answer, if with the cable plugged I play some music on my PC the caller will clear hear what is playing in my computer.
In one more test, I used the MM cable and a splitter. With the Splitter and the cable I was able to stream audio from PC to android mic AND hear the android with a regular earphone, this test was made with a call in course, of course.
But this is only possible because in some way the PC are sending the signal with some extra power. If you try the test with a regular pc headset, without the computer this won't work.
"So why are you here if you did this you noob?" - Well I not figured out why or how the conectors are working when the stream are succesfully done. So I'm here to extend a bit this little research and ask for some help with who master this things. Also I wanna share with you all.
The keys of this are the jack conectors circuit and contacts combinations, and android audio routing using a app like Soundabout.
The main point, in other words, is how to made a DIY cable to stream audio from pc to android mic and with a splitter enable the audio output.
The reason that I'm searching for this is because initially I was looking for a way to did a DIY adapter for PC headphones with two jacks to android input, for single jack.
--
One more little thing, for the people that want to record a call without android modifications, you can plug the same male to male cable to PC MIC and start the sound record app of the Windows, for example.
widek said:
:laugh::laugh:very interested thanks so much
Click to expand...
Click to collapse
:cyclops: let's rock dude!
I need to discover what points must be in contact with the jack input....
bump
Look for 4-pin jack plug in google.
Sent from my GT-S6500 using xda app-developers app
ozix948d said:
Look for 4-pin jack plug in google.
Sent from my GT-S6500 using xda app-developers app
Click to expand...
Click to collapse
I was wondering if one of the rings touch the microphone pin inside the jack input and the tip won't touch anything. If the contact of an output was plugged to contact the mic input we got audio from external source to phone...
This is the average TRRS circuit in our mobiles? TRRS circuit
It sounds like you made contact with the input pin, so you might also be contacting an output pin. I'd get a headset adapter cable, so you have an input and output 3.5mm jack.
electromage said:
It sounds like you made contact with the input pin, so you might also be contacting an output pin. I'd get a headset adapter cable, so you have an input and output 3.5mm jack.
Click to expand...
Click to collapse
Hummm.
I found some stuff
see the second jack
I finally found something like this
and this
Electro I agree, but I don't found the adapter easily here, so this is one of the reasons of why I want do a DIY.
But you said, I will ask: someone can do the test to send audio from pc to phone through the adapter and with a M to M jack cable?
I will try to found a nice way to do it as an DIY.
I wanna know how this exactly works, If I was searching for ready solution I would be an Apple's zombie xP.
I think I found what I need, let me do something here.... thank you guys. If anyone have more to say please feel welcome.
Yeah I nailed it!
I made a DIY adapter for PC headphones to android (at least the Xperia Mini) and a DIY adapter to send audio to android trough a male-to-male cable. Soon I will post pictures.
Is it possible in any way to play music through the usb-cable? I have a carstereo with usb in. When I connect an iPhone it plays all the system audio through the car stereo. When I connect my S4 it browses the card for music files. It seems like I can play music that is stored on the phone, but I never do that. I play music from Spotify, Google Play Music and other streaming services, so I need an aux cable in addition. Not very elegant.
Is there any way to send the system audio through usb? There is a dock-option in settings, but it doesn't seem to do anything...
+1
I completely misunderstod the question duh!
Nope. Not possible To stream Spotify on USB because songs are Not properly stored on device. Best way is bluetooth or AUX.
Sent from my GT-I9505 using Tapatalk 2
I have an iBolt xProDock in my car, which both charges the phone and sends audio out through the phone's microusb connector. When docked, all audio is routed through the car stereo (you have to tick the checkbox under settings/my device/accessory etc).
The only issue in your case would be that the other end of the xProDock audio cable it has a standard 3.5mm plug instead of USB. If your car has AUX input, you could plug this straight in and get all audio from the phone through your car stereo.
smar said:
I have an iBolt xProDock in my car, which both charges the phone and sends audio out through the phone's microusb connector. When docked, all audio is routed through the car stereo (you have to tick the checkbox under settings/my device/accessory etc).
The only issue in your case would be that the other end of the xProDock audio cable it has a standard 3.5mm plug instead of USB. If your car has AUX input, you could plug this straight in and get all audio from the phone through your car stereo.
Click to expand...
Click to collapse
It does have AUX as well as USB so this would work fine. I don't need the mount though, is it possible to buy just a cable like this anywere? Microusb in one end and usb/aux at the other?
jadajada said:
It does have AUX as well as USB so this would work fine. I don't need the mount though, is it possible to buy just a cable like this anywere? Microusb in one end and usb/aux at the other?
Click to expand...
Click to collapse
Basically the cable has been made to so that when it is plugged in, the phone recognises it as a desktop dock. Thus it is a bit more than just a cable with microusb at one end and usb/aux at the other. (If you are interested in making your own cable, may want to do a search on the resistances between the usb pins that Samsung uses to identify different products plugging into the microusb).
Anyway, I haven't come across anywhere that sells just the iBolt type of cable, but to be fair I haven't really looked/enquired. You could contact iBolt and ask if they'll sell the cable, say as a replacement etc.
EDIT: never mind
I think ibolt do sell the cable separately, check the ibolt thread in the Note2 accessories forum.
Sent from my GT-I9505 using Tapatalk 2
smar said:
Anyway, I haven't come across anywhere that sells just the iBolt type of cable, but to be fair I haven't really looked/enquired. You could contact iBolt and ask if they'll sell the cable, say as a replacement etc.
Click to expand...
Click to collapse
Just came across this http://forum.xda-developers.com/showthread.php?t=2350690 in the S4 Accessories forum. So yes, the cable is available separately.