Database Users

[ROM][KK][4.4.4][PORT] CyanAOSP v4.0.0 [FINAL] = FAST & STABLE =

This is a ported version of [ROM][KK][4.4.4]CyanAOSP KK4.4 v4.0.0 for Samsung Captivate.
All Thanks to ts1506 for his efforts!
Main Features
1. Fast, Stable and Intended for gamers
2. Built from CM11 source with O3 optimizations, heavily debloated , no 3rd party apps are installed.
4. Additional tweaks ( varied from previous version v4.0.0 )
5. For those people who love ROMs with lots of theme customizations,apps etc, this ROM is not for you.
Changelog of v4.0.0
1. CM 11 source synced as of 03/07/2014
2. Android base updated to 4.4.4 KTU48P
3. Cleaned up source, updated DocumentsUI for apk install
4. Deleted some junk
Install Procedure for best performance
NOTE : FULL WIPE RECOMMENDED
(You should take a nandroid backup if anything goes wrong)
1. Wipe data , cache , dalvik cache (required while changing layout)
2. Format system and datadata (required while changing layout)
3. Install CyanAOSP ROM. ( if error occurs for "partition layout..",dont panic, its just a warning, repeat this step, it should Flash properly)
4. Install my Gapps package (Required) , link below.
5. Set up the ROM and leave it alone for 10-15 mins.
6. Reboot again and enjoy.
Version Information
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.0.x (Semaphore 3.4.3sc)
ROM Firmware Required: Must be flashed from a recent 4.3 or 4.4 build
Based On: CyanogenMod
Status: Stable
Current Stable Version: 4.0.0
Stable Release Date: 2014-07-03
Download Link
Cyan ROM -
v4.0.0 : Download Here
v3.5.0 : Download Here
Cyan GAPPS [ Reduced Size ] - Download Here
Screenshots - Here
Contributors
ts1506, pawitp, stratosk, fishears, mnazim, SlimTeam, DerTeufel1980, kasper_h, anthonycr,
alberto96, atomixxx (for new logo), Omni ROM Team (xplodwild , Entropy512 and many more)

Another ROM!!
Gonna try it tomorrow. Thanks.

Those who haven't tested v3.5.0 yet, I ask you to wait, CyanAOSP v4.0 (Final version) is coming soon!

I just installed this.. Lot of stuff keeps crashing
eg. Dailer, messages, settings

|=>AmuzZ<=| said:
I just installed this.. Lot of stuff keeps crashing
eg. Dailer, messages, settings
Click to expand...
Click to collapse
Perform FULL wipe & Flash Gapps given in the link, dont flash other gapps. It should work fine

PlayStore fc error on v4.0. I flashed PA gapps and working fine now.

|=>AmuzZ<=| said:
I just installed this.. Lot of stuff keeps crashing
eg. Dailer, messages, settings
Click to expand...
Click to collapse
Same here.
Clean flashed 3 times. 1 time with the Gapps from the first message and 2 times with Bank's.
Also baseband version seems to be unknown even after flashing a modem.

Can't play videos with semaphore kernel, when using cm kernel then can play videos. Any help? I want to use semaphore kernel.

[ROM][CleanKAT][V4.1][A120]Canvas 2 colours

You can say bye bye to your stock rom because Cleankat is here, this is stock aosp based super light, fast, and 100% stable rom with many improvements like battery and ram management. Only 170mb and one of the most used rom on mt6582 chipset
!! Warning: This ROM is only for MMX A120, WIKO RAINBOW and MP RIO V2/V1, if you flash it on anything else, you will brick your device !!
INSTRUCTIONS TO FLASH CWM-
1.Download this recovery package
2.In sptools, select scatter file, then untick everything below except recovery
3.Click download button in sptools
4.Now you have sucessfully updated your recovery :fingers-crossed:
ROM FEATURES-
1.Based on latest mmx KK, so it's totally bugfree
2.Better battery life than other KK ROMs, stock kernel
3.Themed to real white complete kitkat, see screenshots
4.Added data traffic monitor in settings, you can toggle it
5.Added 13 new battery icon styles in settings, ported from carbon rom
6.Added battery icon and percentage in notification header, it's useful
7.Themed all icons to beautiful AOSP/NEXUS also removed 3G icon
8.ROM is not rooted, need to flash root zip, see attachments
9.Deodexed /app, /priv-app, /framework for faster app opening speed
10.Wonderful dolby digital sound with equalizer, see download section
11.Build.prop tweaks and init.d tweaks, working ones only
12.Android 4.4.4 easter egg and build prop, fake (4.4.2)
13.Beautiful Cleankat lockscreen, screenshot attached
14.Beautiful Cleankat bootanimation and bootlogo
15.Cleankat music player, advanced calculator and browser
16.Added notes widget for homescreen, useful for many users
17.Cyanogenmod clock widget with working weather
18.Init.d tweaks, vaccuming, loopy smoothness, zipaligned on boot
19.Launcher plus kk as default launcher app, you can install any launcher
20.Added Cleankat white themed file manager based on FO manager
21.ROM can be flashed on any base, MMX_IN_10 , WIKO BASE , STOCK JB
22.Lightest and cleanest rom ever with added all these features, 170mb only :victory:
INSTRUCTION TO FLASH ROM-
1.If you have already flashed a custom recovery then only proceed
2.Place ROM in your sdcard
3.Wipe data/factory reset
4.No need to wipe other things, script will do it
5.Install zip from sdcard and select cleankat
8.Reboot and enjoy
DOWNLOADS-
CLEANKAT V4.1 WIKO BASE
CLEANKAT V4.0 FOTA BASE
CLEANKAT V4.0 RIO BASE
DOLBY FLASHABLE ZIP
PERFECT_ROOT.ZIP
SCREENSHOTS_HD_(latest V4.0)
Here is a video review of Cleankat V4.1 by @smokerman-
https://www.youtube.com/watch?v=oyp-fMZRSsU
XDA:DevDB Information
CleanKAT ROM, ROM for the Android General
Contributors
umangleekha
Source Code: http://no source
ROM OS Version: 4.4.x KitKat
ROM Kernel: Stock Kernel
ROM Firmware Required: S5501BP_MP_MMX_IN_10 OR STOCK JELLYBEAN 4.2.2
Based On: S5501BP_MP_MMX_IN_10
Version Information
Status: Stable
Current Stable Version: V4.0
Stable Release Date: 2015-02-13
Created 2014-10-12
Last Updated 2015-02-13

Changelog-
Changelog V2.6-
1.Fixed Indian other languages font bugs, important !
2.Fixed tweaks not working in 2.5, included busybox now, impotant !
3.Now included torch app in /system
4.Merged new white bootlogo and animation
5.Fixed, improved perfomance
Changelog V2.7-
1.Finally fixed, improved battery backup
2.Completely removed mmx software update apps
3.More free ram as removed mmx sw upgrade
4.Now added OTA updater for further updates
5.Now reduced rom size to 180mb
Changelog V2.8-
1.New look, complete white kitkat
2.White dialer,framework, systemui, setupwizard
3.White settings, changed settings background to #222222
4.CleanKAT logo in about phone
5.Bigger CleanKAT text in bootanimation
6.Renamed BT to Bluetooth in settings
7.Renamed developer options to noobs keep out
8.Status bar solid color now is #222222
9.Now smaller, 178mb only
Changelog V2.9-
1.Full xposed integration now xposed works without root
2.Gravitybox is now a part of system settings
3.Now very smooth system progress bars
4.Customised about phone in settings
5.Removed software update, and added cleankat version and developer
6.Apollo uses white theme by default now
7.You must fresh install this version after wiping /data
8.Youtube app will now be adfree
9.Forced developer options "noobs keep out" in settings
10.Rom size is still 179mb
Changelog V2.9.1-
1.Xposed added in settings now, not in app drawer
2.Completed some remaining blue->white theming
3.Updated gravitybox 3.4.5-->3.4.6 now
4.Changed icon for partition app
5.Small zip, just flash and reboot over V2.9
Update zip download here
Changelog V3.0-
1.Super stable now, fixed some things
2.Fixed some visual buttons and white elements
3.New tweaks, removed useless ones
4.Better battery life than previous versions
5.New clean and beautiful icons for dialer and contacts
6.New camera and gallery, more editing options in gallery
7.Faster shutter speed and autofocus
8.Do a fresh install of this version !!
9.Super stable and light now, 170mb
Changelog V4.0-
01.Lightest kitkat rom ever, 170mb
02.Fixed live wallpaer, now no issues
03.New feature, data traffic monitor in settings
04.New feature, 13 new battery styles in settings
05.Removed xposed and gravitybox, ART runtime supported
06.Replaced all black with grey color in systemui
07.Added battery icon in statusbar header, it's useful
08.New apollo, file manager cleankat themed
09.Fixed visual artifacts for hdpi, textfields, tabs
10.Added new scripts for smoothness, zipalign
11.Added About cleankat option in settings
12.Multi dpi support, xhdpi and hdpi
13.Fixed lockring size for hdpi
Changelog V4.1-
1.Restarted work, now based completely on wiko rainbow's stock rom, better performance
2.Ported awesome clock customization from ansp rom, with working right clock alignment
3.Now fixed internal sd card not mounting on pc and in settings->storage
4.New lock screen with camera, call and unlock options, wiko's stock
5.Ported gesture controls from stock rom of wiko rainbow
6.Settings and other holo dark apps now use gradient black to grey background for better contrast
7.More neat layout of settings and more neat silent and vibrate icons in statusbar
8.Latest wiko stock boot.img, hopefully better battery backup
Note- Dolby for wiko cleankat is now different, see my dolby thread and download wiko version
Note- The clock in statusbar is off by default, go to settings->cleankat settings->clock

Changelogs
Reserved

Can we get FOTA updates in Pakistan on QMobile i9 if we install the stock MMX JB ROM?

qwerfaseeh said:
Can we get FOTA updates in Pakistan on QMobile i9 if we install the stock MMX JB ROM?
Click to expand...
Click to collapse
Maybe, try it, you can always come back to mmx kk

umangleekha said:
Maybe, try it, you can always come back to mmx kk
Click to expand...
Click to collapse
i installed jellybean mmx and i got 2 updates one was preparation file for kitkat and after restart i got new update which take a lot of time and after it is installed which is kitkat, after restart the boot logo was ok but from boot animation screen goes dim from corners and there was no display and i done this 2 times and same reult.

can you make this official FOTA update flashable for Clones like QMobile i9 etc ?

Cleankat V2.0 not working
@umangleekha
I've been following your posts since I got this device and I've also been installing all the roms that you created for this device.
That's really superb job as all of them were working:good:. But, your recent release Cleankat V2.0 is not working. It installs well and the device also boots up and shows language select option. But then I get error as "Unfortunately, setup wizard has stopped working" and device shows only battery icon on the screen(where it usually shows) and nothing else can be seen.
I've tried rebooting and cleaning everything and rebooting, but no luck.:crying:
Please check into this once.

sulemankhan18 said:
@umangleekha
I've been following your posts since I got this device and I've also been installing all the roms that you created for this device.
That's really superb job as all of them were working:good:. But, your recent release Cleankat V2.0 is not working. It installs well and the device also boots up and shows language select option. But then I get error as "Unfortunately, setup wizard has stopped working" and device shows only battery icon on the screen(where it usually shows) and nothing else can be seen.
I've tried rebooting and cleaning everything and rebooting, but no luck.:crying:
Please check into this once.
Click to expand...
Click to collapse
I know that bug, fixed now in V2.1

Trying this now...this is the new version which juat finished right?
---------- Post added at 08:28 PM ---------- Previous post was at 08:00 PM ----------
how long does this take to boot everything up?

I've been waiting for this. Will try it right away and give u feedback
---------- Post added at 01:31 AM ---------- Previous post was at 01:08 AM ----------
As of right now, everything works just amazing and loved that partition app.
Thanks

Update:
I've observed that ad free hosts are not working. Please check into that once.

Thank you so much for this ROM. So far, so good!

Please aslo make it work on clones

qwerfaseeh said:
Please aslo make it work on clones
Click to expand...
Click to collapse
Latest kernel won't work eith clones, will update ckat 1.3 with different kernel, flashable over old kk

Thanks dear if i replace the kernal in clean kat v2.1 with old one will it work ?
---------- Post added at 10:50 AM ---------- Previous post was at 10:43 AM ----------
I found explay fresh's ROM named Fresh v3 as best ROM for clones as all the Sensors are working perfect on it but the only issue i faced is it does not use memory card at all App Data, DCIM folders are all in Internal Memory, but there is an option to select internal or external storage in storage settings but if i select memory card it still uses internal, is there any patch ?

Does this v2.2 can be flashed from KK? or still have to revert to JB?

youd have to revert ko jb mate,then flash this over

Actually I thought Newer is Better and I was following this post. Now I'm on V2.1
Which one should I install, V2.2 or V2.2a on the other post?

Any updates about the bug fir Rio V1?..

[Z2] [D6503 Marshmallow] [23.5.A.0.575] PRE-ROOTED + TWRP 3.0.0.2 + Xposed [LB/UB]

XPERIA Z2 D6503 23.5.A.0.575 UNLOCKED/LOCKED BOOTLOADER
PREROOTED FLASHABLE ZIP​
YOU WANT THE NEWEST ANDROID 6.0.1 MARSHMALLOW UPDATE ON YOUR XPERIA Z2 BUT YOU WANT TO HAVE ROOT, RECOVERY & XPOSED?
THEN KEEP READING THIS THREAD!
features:
prerooted (BETA-SuperSU-v2.68)
byeselinux
RICDefeat
bootloop fix
signed zip file
Click to expand...
Click to collapse
optional:
recovery (twrp UNLOCKED BL v3.0.2.0 | twrp LOCKED BL v3.0.0.0)
xposed framework v82
DMR Function Restore V3 [Team HSxEXR] [UB]
stable custom kernel for more performance and battery saving
Click to expand...
Click to collapse
custom kernel features:
Based on Sony 23.5.A.0.570 kernel sources (works like charm for kernel .575
Compiled with linaro GCC 4.9.1 toolchain, -O3
Governors : interactive, ondemand, performance, conservative, smartassV2, intellidemand2 and intelliactive.
Fast hotplug
CPU overclock up to 2.8 GHz Thank's to Faux123 and DooMLoRD
Changed GPU frequency table to 27 - 657 MHz Thank's to Myself5
Sony RIC disabled
Undervolt
TWRP recovery included, fota partition support
Breathing notification light thank's to glocklee
Force Fast Charge
KCAL Advanced color control Thank's to savoca
Click to expand...
Click to collapse
ftf:
D6503_23.5.A.0.575_1281-9715_R4D
Click to expand...
Click to collapse
This video is basically for build number .570 but it´s nearly the same. The step with the custom kernel+recovery isn`t mentioned in the video and i installed some mods right after flashing the prerooted zip! i thought it won`t be bad if I add the video which I have already made for the previous prerooted .570!
Checklist:
lollipop/marshmallow (stock or stock based)
root
recovery
non-xposed stock (USE xposed-UNINSTALLER)
Click to expand...
Click to collapse
Introduction:
Download the files from mega.nz
download the newest "ABRICOT KERNEL" from xda-developers.com
put them on your sd card
boot into recovery
X. OPTIONAL flash "xposed-uninstaller-20150831-arm.zip" to remove LP xposed
FACTORY RESET (wipe DATA, CACHE, DALVIK) VIA CURRENT RECOVERY
flash "flashableMM"
flash "byeselinux_flashable.zip"
flash "RICDefeat.zip"
flash "Z2-6.0.1_575_bootloop_fix.zip"
now it`s time to flash your favourite zip files like:
X. OPTIONAL XPOSED flash "xposed-v82-sdk23-arm.zip"
X. OPTIONAL [UB] flash "[Team HSxEXR] DRM function restore V3.zip"
wipe cache & dalvik
X. OPTIONAL [UB] flash the newest [KERNEL][Sony MM]Abricot Kernel for TWRP 3.0 on Unlocked Devices
reboot and enjoy
Click to expand...
Click to collapse
TWRP RECOVERY 2.8.6.0 FOR LOCKED + UNLOCKED BOOTLOADER
download this zip:
https://mega.nz/#!UlxGBQaD!HObJIHr9v...xwE4qlPa89CGbY
After the reboot INSTALL BUSYBOX(Open App and hit Install) and then connect your phone to the PC and run the install.bat from the Z2_MM_Recovery folder (Accept any prompt popping up on your phone)
your Phone will reboot into recovery!
if it doesnt reboot into recovery or the recovery disappears after a few reboots, check out the FIX thread! this is how I got the recovery on .570 and 575...
http://forum.xda-developers.com/xper...overy-t3364871
Click to expand...
Click to collapse
MEGA.nz] DOWNLOAD:
you may need this key: "!5lKqjK9F2xYPXTW-5UOxxw" without the "
DOWNLOAD ALL THE NEEDED FILES HERE
KERNEL + TWRP 3.0.2.0 UNLOCKED BOOTLOADER
DOWNLOAD LATEST VERSION HERE
TWRP 3.0.0.0 LOCKED BOOTLOADER
DOWNLOAD LATEST TWRP VERSION HERE
OPTIONAL UB... optional step for unlocked bootloader
OPTIONAL... optional step for locked and unlockedd bootloader
DO NOT FORGET THAT IF YOU HAVE A LOCKED BOOTLOADER YOU ARE NOT ALLOWED TO FLASH ZIPS FOR [UB] LIKE THE DMR FUNCTION V3 ZIP FILE!
ORIGINAL CUSTOM KERNEL THREAD:
[KERNEL][Sony MM]Abricot Kernel
BUILD YOUR OWN FLASHABLE ZIPS:
FOR AN EASY TUTORIAL CLICK/TAP HERE
FEEL FREE TO PRESS THE THANKS BUTTON!​

Post reserved

You have another Z2 model like the D6502, L50w. D6543, L50t, L50u, SO-03F?
Then build your own flashableMM prerooted zip!
You`ll need:
PRF Creator
ftf
supersu zip
other flashable zips you may want to add like sound mods
Simply run the program, select your ftf and your supersu file. Then add all the other zips you want!
Inlcude everything (Kernel, FOTAKernel, Modem, LTALabel
tick "sign the zip"
Download PRF Creator:
http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
Get your Xperia ftf:
http://forum.xda-developers.com/crossdevice-dev/sony/pc-xperifirm-xperia-firmware-downloader-t2834142
Download SuperSU:
LATEST BETA VERSION
SUPERSU MARSHMALLOW STABLE

ALL FILES WILL BE UPLOADED TODAY:
[Time +02] Europe VIENNA 22:00
UPLOADED

Hello, I tried to install it, as it mensionas, but when you restart stays off, not ensiende, pressing the power, vibrates but does not start, because this happened, I did since 5.1.1 root and dual recovery

ermite666 said:
Hello, I tried to install it, as it mensionas, but when you restart stays off, not ensiende, pressing the power, vibrates but does not start, because this happened, I did since 5.1.1 root and dual recovery
Click to expand...
Click to collapse
Do you have a unlocked bootloader?

I must unlock bootloader to install kernel?
I must unlock bootloader to install kernel?

matwnu said:
I must unlock bootloader to install kernel?
Click to expand...
Click to collapse
For the Kernel v8.1 + TWRP 3.0.2.0 YES IT HAS TO BE UNLOCKED
but I recently added some steps for TWRP 3.0.0.0 on LOCKED BOOTLOADER

ermite666 said:
Hello, I tried to install it, as it mensionas, but when you restart stays off, not ensiende, pressing the power, vibrates but does not start, because this happened, I did since 5.1.1 root and dual recovery
Click to expand...
Click to collapse
you may have flashed the Custom kernel even though you have a locked bootloader.
I updated the description for both (locked and unlocked) bootloaders for installing a twrp 3.x recovery

Hello
I wanted to be rooted Android 5.1 update to Android 6 am after downloading cell phone was reset Sony logo comes just vibrating rings

No other mirror links? I can't download from MU.

I was able to download it today and flashed successfully.
Thanks bro.

Lukkasss said:
I was able to download it today and flashed successfully.
Thanks bro.
Click to expand...
Click to collapse
great

morypory said:
Hello
I wanted to be rooted Android 5.1 update to Android 6 am after downloading cell phone was reset Sony logo comes just vibrating rings
Click to expand...
Click to collapse
i am sorry but I really have no idea what you`re talking about...
too trashy english xd

This kernel supports quick charge?

matwnu said:
This kernel supports quick charge?
Click to expand...
Click to collapse
Nope there is no Marshmallow Kernel for the Z2 which supports QC2.0. The developer of this Kernel told me he's working on it but ain't shure if it really works. But this kernel is in my opinion the best for Android Marshmallow! It enables FastCharge (not as fast as QC2.0 but faster than normal) and has a new hotplug driver called "fast_hotplug". The new driver makes your phone even on low cpu frequences smooth and fast! I am using my z2 at 300-1200MHz with fasthotplug enabled and it seems to be as smooth as on max. Cpu performance! If you want a custom kernel you should really try this one. Another advantage is the twrp 3.0.2.0 recovery on UB, slightly overclocked GPU and CPU for performance like the Z3 and the option to undervolt the cpu to make your battery last longer and let the phone stay cool even WHILE playing games like GTA SA or Modern Combat 5! The breathing notification led bar is another nice feature! Really good and stable kernel. The developer is working on newer versions with new features!

matwnu said:
This kernel supports quick charge?
Click to expand...
Click to collapse
But you can flash Jacko's v5 zip which was made for locked lollipop devices! It boosts the charging process a bit and may be useful. Don't forget to backup before flashing these kind of things, because if the flashing process fails because of some reason(for me it worked like charm) your phone might get VERY VERY HOT while charging! So backup your system+boot+cache and everything will be fine!

freaky2xd said:
But you can flash Jacko's v5 zip which was made for locked lollipop devices! It boosts the charging process a bit and may be useful. Don't forget to backup before flashing these kind of things, because if the flashing process fails because of some reason(for me it worked like charm) your phone might get VERY VERY HOT while charging! So backup your system+boot+cache and everything will be fine!
Click to expand...
Click to collapse
freaky2xd said:
Nope there is no Marshmallow Kernel for the Z2 which supports QC2.0. The developer of this Kernel told me he's working on it but ain't shure if it really works. But this kernel is in my opinion the best for Android Marshmallow! It enables FastCharge (not as fast as QC2.0 but faster than normal) and has a new hotplug driver called "fast_hotplug". The new driver makes your phone even on low cpu frequences smooth and fast! I am using my z2 at 300-1200MHz with fasthotplug enabled and it seems to be as smooth as on max. Cpu performance! If you want a custom kernel you should really try this one. Another advantage is the twrp 3.0.2.0 recovery on UB, slightly overclocked GPU and CPU for performance like the Z3 and the option to undervolt the cpu to make your battery last longer and let the phone stay cool even WHILE playing games like GTA SA or Modern Combat 5! The breathing notification led bar is another nice feature! Really good and stable kernel. The developer is working on newer versions with new features!
Click to expand...
Click to collapse
Okay thanks, I recently unlocked bootloader

freaky2xd said:
Nope there is no Marshmallow Kernel for the Z2 which supports QC2.0. The developer of this Kernel told me he's working on it but ain't shure if it really works. But this kernel is in my opinion the best for Android Marshmallow! It enables FastCharge (not as fast as QC2.0 but faster than normal) and has a new hotplug driver called "fast_hotplug". The new driver makes your phone even on low cpu frequences smooth and fast! I am using my z2 at 300-1200MHz with fasthotplug enabled and it seems to be as smooth as on max. Cpu performance! If you want a custom kernel you should really try this one. Another advantage is the twrp 3.0.2.0 recovery on UB, slightly overclocked GPU and CPU for performance like the Z3 and the option to undervolt the cpu to make your battery last longer and let the phone stay cool even WHILE playing games like GTA SA or Modern Combat 5! The breathing notification led bar is another nice feature! Really good and stable kernel. The developer is working on newer versions with new features!
Click to expand...
Click to collapse
Could you describe what you do to z2 was cold while playing games

I'm on LB.
I've successfully flashed everything and it worked.
Than I've realized I forgot to flash TWRP image. So I went through downgrade and flashing everything again and flashed newest TWRP.img. I got only choice - "Kernel partition".
After that the phone died and flashed only red upon connecting the cable. I've managed to get the red-blinking device to fastboot and flash 5.1.1 again.
What are the correct steps to get working recovery on this locked 6.0.1?
thanks for help!

MIDO - Firmware, Viper, Camera App with White Flash, Magisk, SuperSU, Lineage SU

Hi
I'm tired of people spamming the threads of the roms complaining/requesting about Viper, Firmware, SuperSU Magisk and yellow flash in the Camera App, So I'm posting this thread with all the resources.
All these firmware, Camera App with white flash as well as Viper works with all Lineage 14.1 based roms as well as AOSP roms. I've tried and tested them with Lineage OS 14.1, Viper OS rom, AEX and Cypher OS. And Yes, Viper4Android works even in roms in which SELinux is set to Enforcing.
Package contains:
1) September Firmware for MIDO
2) MIUI Camera App which clicks photos with White Flash. Note : Torch will still use Yellow Flashlight, but who cares about that? No other camera app can use white flash as the process/code which needs to use white flash is there only in MIUI Camera App and No one knows what that is.
3) Viper 4 Android (Works with latest AOSP and Lineage Roms even if SELinux is set to enforcing in the Roms)
4) Magisk 14.0 (Recommended for AOSP based Roms and not for Lineage OS; If you want to pass Safety net successfully, then use Magisk 14 and not SuperSU)
5) SuperSU 2.82 (With Lineage Roms use Official SU on Lineage OS Site)
6) Lineage SU 14.1 (For Lineage 14.1 or Lineage based roms ; After Flashing from Recovery, go to developer options to enable root for Apps)
Installation :
1) UnRAR files first. Then flash whatever ZIP File you want to install from custom recovery (TWRP or equivalent) only.
Downloads :
http://www60.zippyshare.com/v/kbUaMGJA/file.html
OR
http://www.filedropper.com/rn4files
File Size : 77 MB (Approx)
Credits:
Not to me. I haven't developed any of the above mentioned stuff. I'm just compiling stuff.
1) Xiaomi.eu for Firmware
2) MIUI Camera App with White Flash - https://forum.xda-developers.com/re...era-nougat-t3670993/post73741600#post73741600
3) Viper4Android - http://4pda.ru/forum/lofiversion/index.php?t405989-0.html
4) Magisk 14 - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5) SuperSU 2.82 - http://www.supersu.com/download
6) Lineage OS SU - https://download.lineageos.org/extras
With regards;

Could you please tell me which dolby atmos should i use?? Also provide me the link.

ayush.gl said:
Could you please tell me which dolby atmos should i use?? Also provide me the link.
Click to expand...
Click to collapse
Sorry, I don't use Dolby.

ayush.gl said:
Could you please tell me which dolby atmos should i use?? Also provide me the link.
Click to expand...
Click to collapse
http://bfy.tw/EMCH

FaceUnlock Questions

Is FaceUnlock connected to what version of Gapps you use? Or is FaceUnlock built into the ROM itself?
If it is connected to the ROM itself has anyone made a flashable module you can add to implement the feature to any ROM?
If it is connected to Gapps please recommend a Gapps that has FaceUnlock. I currently have tried FlameGapps and OpenGapps Nano which both of these packages didn't add it.

1- No.
2- Yes.
3- That's not possible because it's not a simple apk, some changes are needed in various parts of the system to make it work.

As far as I know, it is removed in android 10 so you wont find it in stock android and pixel phones. If you want to use it, you need to pick rom that supports it, for example oos based on android 10, rr, paranoid, treskmod (using right now, very cool rom). It is not possible to get it work in rom that doesnt support it (nor with xposed, magisk, apk, gapps, nothing).