Database Users

Help. have anybody succeed downgrading from emui5 to 4.1?

i mean .. i tried everything
but.. still i stock on this ugly thing
can anybody help me?
im a NXT-DL00
kinda desperate

It's not as complicated as you might fear, stick with this and we'll get you back to 4.1
You have to be using EMUI 5's stock recovery for this to work, if you don't have it anymore use the Huawei update extractor to pull it and then install it via fastboot.
Then place the update.app file from the 4.1 firmware you want to roll back to into a folder called dload in your internal storage's root directory.
Turn your device off and hold VOL+, VOL- and power at the same time, it should enter dload mode and automatically start updating. when it is done you should be back to 4.1
You'll need to re-unlock your bootloader and reinstall TWRP for 4.1 but that should be it
any questions?

MathewBrack said:
It's not as complicated as you might fear, stick with this and we'll get you back to 4.1
You have to be using EMUI 5's stock recovery for this to work, if you don't have it anymore use the Huawei update extractor to pull it and then install it via fastboot.
Then place the update.app file from the 4.1 firmware you want to roll back to into a folder called dload in your internal storage's root directory.
Turn your device off and hold VOL+, VOL- and power at the same time, it should enter dload mode and automatically start updating. when it is done you should be back to 4.1
You'll need to re-unlock your bootloader and reinstall TWRP for 4.1 but that should be it
any questions?
Click to expand...
Click to collapse
first of all thx4helping.
can u tell where to find this EMUI5'S STOCK RECOVERY...

craigzhong said:
first of all thx4helping.
can u tell where to find this EMUI5'S STOCK RECOVERY...
Click to expand...
Click to collapse
Ok, so you should already have it, unless you installed some form of TWRP since updating to EMUI 5.
If you don't have the stock recovery anymore:
extract the EMUI5 rom zip that you flashed to update to your desktop
download this tool on to your computer
http://forum.xda-developers.com/showthread.php?t=2433454
run it and hit the "..." button, this will open a new window, find the update.app file that you just extracted and select ok.
This will bring up a list of files one will be called recovery, right click it and click extract.
Then in fastboot mode:
Code:
fastboot flash recovery recovery.img
let it run and you should have the stock recovery back again

MathewBrack said:
Ok, so you should already have it, unless you installed some form of TWRP since updating to EMUI 5.
If you don't have the stock recovery anymore:
extract the EMUI5 rom zip that you flashed to update to your desktop
download this tool on to your computer
http://forum.xda-developers.com/showthread.php?t=2433454
run it and hit the "..." button, this will open a new window, find the update.app file that you just extracted and select ok.
This will bring up a list of files one will be called recovery, right click it and click extract.
Then in fastboot mode:
Code:
fastboot flash recovery recovery.img
let it run and you should have the stock recovery back again
Click to expand...
Click to collapse
im at B523 now... i tried what u told me.. didnt work out as i expected
failed at 5%

First setup roll back package via dload then your original software according to your brand also via dload

baasseemm said:
First setup roll back package via dload then your original software according to your brand also via dload
Click to expand...
Click to collapse
what roll back package.. seems like dl00 doesnt have one

Cust partitions miaght have got damaged

I can't help until you tell me more information that you emui5

craigzhong said:
im at B523 now... i tried what u told me.. didnt work out as i expected
failed at 5%
Click to expand...
Click to collapse
That's fine, try a different update. Mine worked on B321

Bootloop after trying to downgrade to MM

Hello,
today I tried to downgrade from nougat to MM. After the MM Rom was installed, my phone only shows me the Huawei Brand. The phone does not start, it only shows huawei brand. How can I rescue my phone now ???? Please help
Edit:
If I press Power + VolDown it says PHONE Locked, FRP Unlock
I tried the rollback with this method:
http://www.stechguide.com/downgrade-huawei-p9-lite-from-nougat-to-marshmallow/

Volup + Power , Format data, Format Cache, Reboot

nitroax said:
Volup + Power , Format data, Format Cache, Reboot
Click to expand...
Click to collapse
That is unfortunately not helping. If I do so the phone restarts and the Huawei Boot Logo shows up, but I am not able to enter erevory or somethin else. Only thing working is fastboot when I press Volume down.

ndroid1562 said:
That is unfortunately not helping. If I do so the phone restarts and the Huawei Boot Logo shows up, but I am not able to enter erevory or somethin else. Only thing working is fastboot when I press Volume down.
Click to expand...
Click to collapse
Make sure you dont have the usb cable plugged when you try to enter recovery.
Have you tried flash the MM UPDATE.APP again ?

nitroax said:
Make sure you dont have the usb cable plugged when you try to enter recovery.
Have you tried flash the MM UPDATE.APP again ?
Click to expand...
Click to collapse
Yes I Trier without USB cable plugged in. What I recognised before the bootloop is: The flash of the rollback Version was successful but the phone was then already stuck in bootloop. So i don't even could install the real Version of MM.
Is there a possibility to install the stock Rom with fastboot? My bootloader is opened and I don't Kind if I lose all my data.

ndroid1562 said:
Yes I Trier without USB cable plugged in. What I recognised before the bootloop is: The flash of the rollback Version was successful but the phone was then already stuck in bootloop. So i don't even could install the real Version of MM.
Is there a possibility to install the stock Rom with fastboot? My bootloader is opened and I don't Kind if I lose all my data.
Click to expand...
Click to collapse
You should be able to put the MM update in dload folder of your sdcard, and use the 3 button method to flash it.
Otherwise use huawei firmware extractor to pull the system.img data.img boot.img from the update.app of the MM, and use fastboot flash system SYSTEM.img . Same thing for boot and data

nitroax said:
You should be able to put the MM update in dload folder of your sdcard, and use the 3 button method to flash it.
Otherwise use huawei firmware extractor to pull the system.img data.img boot.img from the update.app of the MM, and use fastboot flash system SYSTEM.img . Same thing for boot and data
Click to expand...
Click to collapse
Thanks for your answers and your help. The first method is not working, if I press all three buttons together, my phone just restarts and the Huawei Boot Sign shows up again.
I'd like to try the second method? But could you tell me, how I can find the system.img, data.img, boot.img files and where I can find the HUAWEI FIRMWARE EXTRACTOR.

ndroid1562 said:
Thanks for your answers and your help. The first method is not working, if I press all three buttons together, my phone just restarts and the Huawei Boot Sign shows up again.
I'd like to try the second method? But could you tell me, how I can find the system.img, data.img, boot.img files and where I can find the HUAWEI FIRMWARE EXTRACTOR.
Click to expand...
Click to collapse
Use this tool to extract them from the UPDATE.APP file of the MM: https://forum.xda-developers.com/showthread.php?t=2433454
First extract the RECOVERY.img only and flash it with fastboot. After that test the three button method again (make sure that you have the file from MM (2.0GB) in the dload folder). If it doesnt work, try the thing i said before.

ndroid1562 said:
Thanks for your answers and your help. The first method is not working, if I press all three buttons together, my phone just restarts and the Huawei Boot Sign shows up again.
I'd like to try the second method? But could you tell me, how I can find the system.img, data.img, boot.img files and where I can find the HUAWEI FIRMWARE EXTRACTOR.
Click to expand...
Click to collapse
OK, sorry for being such a noob. I now installed the Huawei Extractor. Furthermore I downlaoded stock Rom MM B130. Now there are two ZIP Files (like you can see on the picture). Do I have to extract both of them???
EDIT:
There is no data.img in Huawei Extractor. I have taken a screenshot of the files too (you can see it on the second image).

ndroid1562 said:
OK, sorry for being such a noob. I now installed the Huawei Extractor. Furthermore I downlaoded stock Rom MM B130. Now there are two ZIP Files (like you can see on the picture). Do I have to extract both of them???
Click to expand...
Click to collapse
No, only the first (1.7gb).
EDIT: Forget the data.img for now. Try to flash the other files and even if it dont boot, use the version C432B160 to flash using dload method

nitroax said:
No, only the first (1.7gb).
Click to expand...
Click to collapse
There is no data.img in Huawei Extractor. I edited my last reply. Where can I find data.img?

nitroax said:
Use this tool to extract them from the UPDATE.APP file of the MM: https://forum.xda-developers.com/showthread.php?t=2433454
First extract the RECOVERY.img only and flash it with fastboot. After that test the three button method again (make sure that you have the file from MM (2.0GB) in the dload folder). If it doesnt work, try the thing i said before.
Click to expand...
Click to collapse
Before I do the steps you discribed I have two questions.
First: I have to recovery images... RECOVERY.img and RECOVERY2.img. Do I have to flash both of them?
Second: I took a SD Card now and created a folder named dload. In it I put the UPDATE.app file. This has 3 GB, in your post you said it has to be 2 GB. So did I take the right UPDATE file or is it the wrong one?

ndroid1562 said:
Before I do the steps you discribed I have two questions.
First: I have to recovery images... RECOVERY.img and RECOVERY2.img. Do I have to flash both of them?
Second: I took a SD Card now and created a folder named dload. In it I put the UPDATE.app file. This has 3 GB, in your post you said it has to be 2 GB. So did I take the right UPDATE file or is it the wrong one?
Click to expand...
Click to collapse
1 - RECOVERY.img
2 - Youre right the file have 3GB (2gb zipped lol)

nitroax said:
1 - RECOVERY.img
2 - Youre right the file have 3GB (2gb zipped lol)
Click to expand...
Click to collapse
Hahaha, ok. So my veryyy last question. How can I flash the image files now? I thought I could do it with ODIN but there is no possibility to take img files ...?

nitroax said:
1 - RECOVERY.img
2 - Youre right the file have 3GB (2gb zipped lol)
Click to expand...
Click to collapse
I now managed to flash BOOT.img, RECOVERY.img and SYSTEM.img. Afterwards it was possible to extract UPDATE.app by pressing VOL up # VOL down # and the other Button (don't know the english word). But the installation of the UPDATE.app stops on 5%. Whats the reason for this?

So I have a guess right now: Before I tried to downgrade my phone I uninstalled SuperSu but I didn't unroot my phone. So my phone could be still rooted. Could this be the problem why the installation is not working?

nitroax said:
Volup + Power , Format data, Format Cache, Reboot
Click to expand...
Click to collapse
If I try to do a factory reset in eRecovery it stops at 10 % and shows me a " ! ".
I could format chache, but afterwards my Bootloop problem is still not solved ...

ndroid1562 said:
If I try to do a factory reset in eRecovery it stops at 10 % and shows me a " ! ".
I could format chache, but afterwards my Bootloop problem is still not solved ...
Click to expand...
Click to collapse
Since I couldn't manage to rescue my beloved Smartphone, I now sell it on eBay. The Phone is in Germany, but I would send it to other cities in Europe for transportation costs of extra 10 EUROS. If you are interested and like to bid, here is the Link:
http://www.ebay.de/itm/-/201932576564?

ndroid1562 said:
Hahaha, ok. So my veryyy last question. How can I flash the image files now? I thought I could do it with ODIN but there is no possibility to take img files ...?
Click to expand...
Click to collapse
odin is for samsung phones, try unlocking the bootloader, fastboot flash twrp, flash oeminfo in twrp and then use the update.app and 3 button combo, there are guides on this forum explaining exactly how to do it. just make sure you have the correct files.

Upgrading P8 Lite Dual Sim from ALE21 C636B150 EMUI 3.1

Guys I'm really lost trying to upgrade to Android 6 or even 7.
I know I must upgrade to at least EMUI 4.0
I know I am rooted.
I'm unsure if I have unlocked my boot loader.
How do I easily change Country Codes? Do I even need to do it?
I think if someone can assist with these early steps, then I can proceed alone to install new ROMs etc.

C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540

amageek said:
C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540
Click to expand...
Click to collapse
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.

aussie_boi said:
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.
Click to expand...
Click to collapse
try installing TWRP v. 3.1.1... That's the latest TWRP and compatible with Marshmallow...

[BND-L22 / BND-AL10C675] Back to Stock / Unbrick your Honor 7X Indian Variants

Hello All, this guide will help to unbrick or back to stock firmware on Indian Variants BND-L22 and BND-AL10C675
Dont try it on other variant otherwise you will fail to install and may loose your IMEI number.
Do it on your own risk. I will not be responsible for any damage to your phone.
I am not a developer so i cant help you much if this update process fails.
PreRequisites :
1. Bootloader Locked/ReLocked/UnLocked
2. Stock Recovery/TWRP. it works with TWRP, still i suggest you use stock one. Download stock recovery for BND from here
https://mega.nz/#!KixHHCKJ!4hw_lHQGYa_0BJ79lou4m34Fmi23wBctbbvdSCyvCYE
3. SD card (at least 5gb free memory)
Preparations :
1. Backup your data
2. if you are on twrp, just flash Stock recovery via Fastboot or MT
command ' fastboot flash recovery recovery.img '
3. Lock/relock your bootloader ( you may test it on unloacked bootloader)
command ' fastboot oem relock (unlock code) '
4. download this tar. gz file, extract it and Copy 'dload' folder on your SD card, put SD card in your phone
https://mega.nz/#!SuwDUTCJ!iaBnYIbLlMggGId_COuu-xY9pZ2Tec66si5PEcEhovM
This is full Stock Rom not just an OTA update.
5. charge your phone to at least 50%
Steps :
1. switch off your phone and wait for 10 secs
2. press vol.up + vol.down + power keys simultaneously
3. keep keys pressing for few seconds and your phone will boot into automatic update package installer.
4. wait till updating/installing done. If process is stucked at 99%, dont worry just wait for few mins.
5. after updating package done, your phone will boot into stock system. congratulations

Dr.Anshuman said:
Hello All, this guide will help to unbrick or back to stock firmware on Indian Variants BND-L22 and BND-AL10C675
Dont try it on other variant otherwise you will fail to install and may loose your IMEI number.
Do it on your own risk. I will not be responsible for any damage to your phone.
I am not a developer so i cant help you much if this update process fails.
PreRequisites :
1. Bootloader Locked/ReLocked (I've not tried on UnLocked bootloaders)
2. Stock Recovery (I've not tried on TWRP). Download stock recovery for BND from here
https://mega.nz/#!nyY1QRpR!gp5k4nqkQUfktrD2B5Qb1OhhAXmO5Mi2aaMPz8CD8Ts
3. SD card (at least 5gb free memory)
Preparations :
1. Backup your data
2. if you are on twrp, just flash Stock recovery via Fastboot or MT
command ' fastboot flash recovery recovery.img '
3. Lock/relock your bootloader ( you may test it on unloacked bootloader)
command ' fastboot oem relock (unlock code) '
4. download this tar. gz file, extract it and Copy 'dload' folder on your SD card, put SD card in your phone
https://mega.nz/#!SuwDUTCJ!iaBnYIbLlMggGId_COuu-xY9pZ2Tec66si5PEcEhovM
This is full Stock Rom not just an OTA update.
5. charge your phone to at least 50%
Steps :
1. switch off your phone and wait for 10 secs
2. press vol.up + vol.down + power keys simultaneously
3. keep keys pressing for few seconds and your phone will boot into automatic update package installer.
4. wait till updating/installing done. If process is stucked at 99%, dont worry just wait for few mins.
5. after updating package done, your phone will boot into stock system. congratulations
Click to expand...
Click to collapse
How come you got the stock image of bnd al-10?

Asder.mko said:
How come you got the stock image of bnd al-10?
Click to expand...
Click to collapse
Its Unofficial.

Dr.Anshuman said:
Its Unofficial.
Click to expand...
Click to collapse
That doesn't matter if it works. I'm having unlocked bootloader.
Let me check and confirm whether it works or not on unlocked device.

Dr.Anshuman said:
Hello All, this guide will help to unbrick or back to stock firmware on Indian Variants BND-L22 and BND-AL10C675
Dont try it on other variant otherwise you will fail to install and may loose your IMEI number.
Do it on your own risk. I will not be responsible for any damage to your phone.
I am not a developer so i cant help you much if this update process fails.
PreRequisites :
1. Bootloader Locked/ReLocked (I've not tried on UnLocked bootloaders)
2. Stock Recovery (I've not tried on TWRP). Download stock recovery for BND from here
https://mega.nz/#!nyY1QRpR!gp5k4nqkQUfktrD2B5Qb1OhhAXmO5Mi2aaMPz8CD8Ts
3. SD card (at least 5gb free memory)
Preparations :
1. Backup your data
2. if you are on twrp, just flash Stock recovery via Fastboot or MT
command ' fastboot flash recovery recovery.img '
3. Lock/relock your bootloader ( you may test it on unloacked bootloader)
command ' fastboot oem relock (unlock code) '
4. download this tar. gz file, extract it and Copy 'dload' folder on your SD card, put SD card in your phone
https://mega.nz/#!SuwDUTCJ!iaBnYIbLlMggGId_COuu-xY9pZ2Tec66si5PEcEhovM
This is full Stock Rom not just an OTA update.
5. charge your phone to at least 50%
Steps :
1. switch off your phone and wait for 10 secs
2. press vol.up + vol.down + power keys simultaneously
3. keep keys pressing for few seconds and your phone will boot into automatic update package installer.
4. wait till updating/installing done. If process is stucked at 99%, dont worry just wait for few mins.
5. after updating package done, your phone will boot into stock system. congratulations
Click to expand...
Click to collapse
If you have a twrp already why bother to install drivers and go for ADB you can just flash the recovery.img from twrp .It works too .just a suggestion

trixter127 said:
If you have a twrp already why bother to install drivers and go for ADB you can just flash the recovery.img from twrp .It works too .just a suggestion
Click to expand...
Click to collapse
hiiiiiiii dear....pls tell me .....this is official indian Rom for honor 7x ..........and does it contains preinstalled gapps.......

trixter127 said:
If you have a twrp already why bother to install drivers and go for ADB you can just flash the recovery.img from twrp .It works too .just a suggestion
Click to expand...
Click to collapse
yes, but when it comes to complete stock, i prefer fastboot commands.

gouravbharat2014 said:
hiiiiiiii dear....pls tell me .....this is official indian Rom for honor 7x ..........and does it contains preinstalled gapps.......
Click to expand...
Click to collapse
this is a complete Firmware including gApps.

Dr.Anshuman said:
yes, but when it comes to complete stock, i prefer fastboot commands.
Click to expand...
Click to collapse
Well, thanks for the post

Dr.Anshuman said:
this is a complete Firmware including gApps.
Click to expand...
Click to collapse
thanks a ton.........

Hi !
It work on BND-L21C432 ?
Thanks !

Thanks
Awesome it worked

saifuddin.slatewala said:
Awesome it worked
Click to expand...
Click to collapse
Model? Ota working?

DaRkLinK_35 said:
Hi !
It work on BND-L21C432 ?
Thanks !
Click to expand...
Click to collapse
This is only for L22 and AL10C675, dont try it on other versions.

Dr.Anshuman said:
This is only for L22 and AL10C675, dont try it on other versions.
Click to expand...
Click to collapse
Ok thanks for you reply !

Username.php said:
Model? Ota working?
Click to expand...
Click to collapse
honor 7x model: BND-AL10

can we use this method to roll back the faceunlock update as its having annoying touch problems? (Indian Version)

Yes it will rollback to earlier version one without face lock

saifuddin.slatewala said:
Yes it will rollback to earlier version one without face lock
Click to expand...
Click to collapse
thanks, do i need to factory reset or just flash this file on top of faceunlock from recovery?
also after this flashing, can we still get OTA updates as normal?

Thank you so much mate. I am back on stock ROM and I did get Oreo ota today just because of you.

[working & tested] unbrick bnd-l24

Many users on this forum have a bricked Honor 7X (BND-L24 variant) and haven't found a working guide to breath life back into their devices. Fortunately, I found a method that appears to have fixed my BND-L24 that was running on oreo. Maybe it will work for you too. Nougat users, feel free to try this method on your devices. Just know that I am not responsible for any damage or anything else should your bricked-phone-situation go from bad to worse.
********REQUIREMENTS********
1. microSD card ---> You need one of those adapter things to access the microSD card on your computer. We're going to be moving files to this little guy.
2. TWRP recovery --> We're going to be flashing a zip so stock recovery won't work here. Don't worry, once we flash the zip, TWRP will be gone
3. HuRUpdater_0.3.zip --> I know there is a HuRUpdater_0.2.zip too but I used HuRUpdater_0.3.zip when I unbricked mine so . . . that's what we're gonna use. You can download it here: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Don't forget to thank the developer!
********STEPS********
1. First things first. Download these three files:
update.zip
update_full_BND-L24_hw_usa.zip
update_data_full_public.zip
2. Once downloaded, rename them as listed here. THIS STEP IS NOT OPTIONAL
update_full_BND-L24_hw_usa.zip -----> update_all_hw.zip
update_data_full_public.zip -----> update_data_public.zip
DO NOT RENAME update.zip
3. Make a folder on the microSD card. You can name it whatever you would like. For the purposes of this guide, I named mine "Recovery". Move all four of the zips (or archives, whatever you wanna call them) that you downloaded to this new "Recovery" folder. Then eject the microSD card.
4. Insert the microSD card into your paperweight, I mean bricked Honor 7X. Then boot into TWRP.
5. In TWRP, tap on "Install". Then browse to your external SD card and tap on "HuRUpdater_0.3.zip". Swipe to flash it.
6. Once everything finishes installing, tap on "Reboot" then "System" (I have no idea why you would want to install the TWRP app if you don't have TWRP anymore but . . . to every man his own). When the unlocked-bootloader-warning screen pops up, press and hold the volume up button to boot into eRecovery. Perform a factory reset from there.
7. After the factory reset is completed, say hello to your now fully functional device.

Giving this a try right now. Will report back. Thank you so much!

After flashing HuRUpdater_0.3.zip and holding volume up, it just boots back into TWRP?
Edit: Never mind, I'm dumb and didn't press volume down during the flash.
---------- Post added at 04:46 AM ---------- Previous post was at 04:17 AM ----------
IT WORKED! Thanks so much!!!!!
One error in your directions though:
update_data_full_public.zip -----> update_full_public.zip
should be
update_data_full_public.zip -----> update_data_public.zip

ekovv said:
After flashing HuRUpdater_0.3.zip and holding volume up, it just boots back into TWRP?
Edit: Never mind, I'm dumb and didn't press volume down during the flash.
---------- Post added at 04:46 AM ---------- Previous post was at 04:17 AM ----------
IT WORKED! Thanks so much!!!!!
One error in your directions though:
update_data_full_public.zip -----> update_full_public.zip
should be
update_data_full_public.zip -----> update_data_public.zip
Click to expand...
Click to collapse
Fixed. Thanks for spotting the mistake.

Any known way to get TWRP first? I don't have it and erecovery seems to not install firmware

fitkidgil said:
Any known way to get TWRP first? I don't have it and erecovery seems to not install firmware
Click to expand...
Click to collapse
Download HWOTA8. After you extract it there is a twrp image in it. There is also a stock recovery image in it incase something goes wrong. There is a thread here on twrp. You will come across a twrp image by sudeep. You can use it too. Although it didn't work perfectly for me. Use adb or multitool to flash them

my phone is bricked... thus the bootloader is locked... i cant flash to it.

Bricked as in display won't turn on?

when i turn it on, it comes up to erecovery, "download latest version and recovery" will connect to wifi but fail to download. Multi-Tool says bootloader is locked as well.

fitkidgil said:
when i turn it on, it comes up to erecovery, "download latest version and recovery" will connect to wifi but fail to download. Multi-Tool says bootloader is locked as well.
Click to expand...
Click to collapse
Try to use the service rom.
The erecovery thing does not work, exceptaybe on Chinese version of rom, it seems

Thank you so much! I have tried every other method on this forum over the past few months and wasted countless hours. I could not get ANY other method to work. This worked perfectly the very first time. Thanks!!!

Not sure what you mean by use the service rom... I can't flash the ROM because the bootloader is locked.

fitkidgil said:
Not sure what you mean by use the service rom... I can't flash the ROM because the bootloader is locked.
Click to expand...
Click to collapse
The service rom does not need unlocked bootloader.
You do need your unlock code though.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.

Is there still a way to get the code? I haven't been able to get it

****, I ****ed it up.
Started installing the file without first renaming. TWRP is gone and now I have no way install those files. bootloader is "soft" locked and I'm ****ed...

renatofontes said:
****, I ****ed it up.
Started installing the file without first renaming. TWRP is gone and now I have no way install those files. bootloader is "soft" locked and I'm ****ed...
Click to expand...
Click to collapse
There is an option to use bnd-l21 service rom. Which will allow you to boot and unlock bootloader again. Then start over with hurupdater.

mrmazak said:
There is an option to use bnd-l21 service rom. Which will allow you to boot and unlock bootloader again. Then start over with hurupdater.
Click to expand...
Click to collapse
Thanks!
---------- Post added at 08:01 PM ---------- Previous post was at 07:14 PM ----------
I got some errors when running the Hur Updater
I'm currently redownloading the files hoping there were download incorrectly the first time or something...

I finally got it working, but I can't install updates. Anyone else have this issue?

I need help
First, I did something and now when it boots it doesn't show the honor logo but it shows the huawei logo and can't progress farther (I swear I didn't try to install another OS)
Second, I can't access twrp but can access fastboot. I have downloaded twrp and was able to access it before I messed up even more to the point that it doesn't show the honor logo
In the fastboot screen, it says PHONE Relocked but when I type in fastboot oem get-info in the terminal of my computer with my honor 7x connected to it and fastboot screen it says (bootloader) unlocked ,so I'm not sure if the bootloader is actually locked or unlocked
So what I'm not sure about is what can I do to access TWRP. I tried installing it again but it didn't work either user error or it's just not possible to
All your help will be very appreciated because I don't have money to get another phone
i really shouldn't have done any of this knowing that I don't have money to get another phone
edit:
I don't think the OEM is unlocked like the thingy from the developer options because I don't see FRP in fastboot screen, just PHONE Relocked

mrmazak said:
The service rom does not need unlocked bootloader.
You do need your unlock code though.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse
thank you so much for this. I was able to downgrade and read my code to unlock.