My Phone boot is dead. It doesnt turn on even on pressing power key or even on charging, it doesnt show up anything. I tried flashing it but it is of no use. I went to a shop and asked what the problem was he said, Boot is Dead. How can i repair my dead boot so that i can bring life to my phone. :crying::crying::crying: its urgent.. You guys know what its like to stay even a day without your phone :crying::crying: HELP ME PLEASE.
spice mi 498 dead after flash with sp flash tool
after dead
and failed to get pmt info
Does not accept update
please help
I want a full flash file Or system files
Or backup by flash_tool
there is nobody
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
hi eslamelsadany,
can you elaborate this. i cant understand.
i flashed my spice mi 498, it was successful but my does not boots neither shows anything when put to charge. Its completely black. When I tried to upgrade the firmware the message shown was "no valid partition for storage device" . I tried everything that was in my scope but no result. Please tell me a solution.
Abhishak, your emmc chip is dead, and only way to fix this is replacing the emmc chip.
If your phone is not getting detected by pc due to flashing wrong firmware and/or you have dead boot or corrept preloader. I found a fix for that.
m.youtube.com/watch?v=oqmRa8k-ZJA
Related
Hello, I was changing Inazuma ROM(LP) to MIUI v7 on kitkat. I used D802_PATCH_RETURN_KK_droidth.zip to do this. But unfortunately after I got "secure booting error". I tried lg flash tool (kdz and via tot options). In both case I have a error cuz system partition was changed. Indeed I was changing my partitions for more space in memory. And now I have a trouble. I tried to enter recovery but instead I did hard reset and lost secure error and qhsusb_bulk.
In download mode I got:
"COM 41
F USER S0.0 AS0.0 B87 UHS
S U LG-D802 04.2.2 Hrev_11
D80210F
D80210B
ROOTED"
Its a way to resize partition to restore system via kdz? I did it before but I needed adb and twrp. ( I set 2.0 GB for system)
@edit
I did a flash via LGFlashTool but I still got a bootloop. Of course I did hard reset but didnt help. I cannot enter recovery so Im not able to fix for flashtool.
What can I do now? Its a way to put custom recovery in download mode?
Good evening,
This is the first time I post here and my GT- I9300I was working but the battery had just quickly ( 1 hour use at most , heated machine ) and my IMEI was null \ null. I bought the unit secondhand but I was trying to solve these problems by odin , I backup the efs folder and etc ... But to try at Odin in any version flash the device came across the error " There's no partition pit ", and in so downloading the message : " mmc write fail" . Soon after I tried to restore the cell the way recovery along with the sd card but without success . I then decided to take a cw and flashing by cell own which caused the device now only is in downloading mode and I can not put him or download mode or turn it again. It already starts in recovery mode! If you can help me thank you !!
* I tried to flash the cw to fix the recovery mode problem that was not able to format the memory card
anyone ? my error is stupid ?
I have this g530h , he's bricked , but all rom I try to install, from the same error:
MMC : mmc_write fail
ODIN : flash read failure
Already downloaded several 5.0.2
several 4.4.4
I tried to recovery , to installing a rom over but only gives it there.
Does anyone know q do?
MMC failure to read and write Indicates a problem with the flash memory.
After flashing with spflash tool
Before I had done it I did not how to get back up of current ROM
So, after flashing it was showing invalid IMEI and WiFi nvram warning 0x01 error
After some time i had successfully made my device(Moto E3 power)
I solved my problem of invalid IMEI
But I can't solve my WiFi nvram warning
Dose not work any method for fix this problem
Please guys help me
i had done it
gupta8914 said:
After flashing with spflash tool
Before I had done it I did not how to get back up of current ROM
So, after flashing it was showing invalid IMEI and WiFi nvram warning 0x01 error
After some time i had successfully made my device(Moto E3 power)
I solved my problem of invalid IMEI
But I can't solve my WiFi nvram warning
Dose not work any method for fix this problem
Please guys help me
Click to expand...
Click to collapse
I think you used sp flash tool with format + download
So ok
You have to again Flash with format + download
Why?
Because error files will format from your device
After flashing , don't power up your device
Just disconnect your device
And download sn writer tool V1.15552.00
Then extract in computer and open
Tick on , barcode,IMEI ,bt address,WiFi adress and serial no.
Then, tick on,IMEI checksum,dual imei
Then, choose your modem and apdp file
And save it
Then click on start,and fill up proper details
And now connect your Moto E3 power with usb
And it take some time
And it will show successfully pass (with green sign)
And then power up your smartphone
Now it's fix
Hello everyone,
And yes another idiot who blocked his phone.
I wanted to update my phone in B370.
For that I am ironed in B160 and I wanted to update by HIsuite but it did not work.
So I went through HuaweiUpdater and the disaster ... I completely blocked my phone.
I only have access to Fastboot and that's it. Otherwise it stays on:
"Your device has failedverification and may not work properly"
In fast boot I tried to flash the recovery = Failed.
My phone is a vns-l31 bootloader and FRP unlocked
Can you help me ?
thank you in advance
Plz help
As well,
In RevolutionRecovery I have this data error:
Mount -0 bind '/ data / media' '/ sdcard' process ended with ERROR = 134
someone help me?