HelpGT-I9300I odin theres no partition ,mmc write fail.Only start in dowloading mode - Galaxy S3 Neo Q&A, Help & Troubleshooting

Good evening,
This is the first time I post here and my GT- I9300I was working but the battery had just quickly ( 1 hour use at most , heated machine ) and my IMEI was null \ null. I bought the unit secondhand but I was trying to solve these problems by odin , I backup the efs folder and etc ... But to try at Odin in any version flash the device came across the error " There's no partition pit ", and in so downloading the message : " mmc write fail" . Soon after I tried to restore the cell the way recovery along with the sd card but without success . I then decided to take a cw and flashing by cell own which caused the device now only is in downloading mode and I can not put him or download mode or turn it again. It already starts in recovery mode! If you can help me thank you !!

* I tried to flash the cw to fix the recovery mode problem that was not able to format the memory card

anyone ? my error is stupid ?

Related

Cant Boot up phone

I cant boot up my phone after changing permissions of font folder , the device keep vibrate at boot screen.
so i try to flash stock firmware with odin v3.09 , odin says fail.
when i enter recovery mode it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I Followed the error message , nothing worked.
Need some help.. !
EDIT : Phone : SM-N9005 , stock rom rooted with towelroot 0x0 knox
EDIT 2 : Im so panic and scared , so i decided to try using different cable and USB port
I used an 0.5 Metre long USB3 Cable(from ext harddisk) and front usb port of my pc and....
IT WORKED!!! I'm Happy and sad ,
my data all gone.. i don't have an extSD but my phone is restored !!

[Q] recovery mode on my sm-n910h wont work !

hello everyone
i have a galaxy note 4 with 4.4.4 kitkat i tried to upgrade to lollipop 5.0.1 with odin and it said fail ! then the phone freezd.
i tried to open the recovery mode and it didnt work , then the dowload mode and a "firmware upgrade encountered issue" message showed up
now the phone wont boot ..
please guys help me with this issue cause i really need my phone to work on
safwenbaya said:
hello everyone
i have a galaxy note 4 with 4.4.4 kitkat i tried to upgrade to lollipop 5.0.1 with odin and it said fail ! then the phone freezd.
i tried to open the recovery mode and it didnt work , then the dowload mode and a "firmware upgrade encountered issue" message showed up
now the phone wont boot ..
please guys help me with this issue cause i really need my phone to work on
Click to expand...
Click to collapse
If your Phone is Not Rooted & Still Official Recovery You are using Try to Recover with Samsung Kies Most of the issues it'll solve...
Did you Check before Flashing the Drivers & Proper AP/PDA section??
More important are you Flashing the Correct Firmware for your Device???
Yeah cant connect to kies back then but i found a trick to passe that fail in odin when upgrading to 5.0.1 : when it freezed i reopened the download mode and put the n910h root in odin and then it succeded and the phone rebooted and bootlooped i then could access the recovery mode , i wiped everything and the phone just worked but with the 4.4.4 .
I tried one more time with the same procedure but when i opened the recovery mode i just hit reboot and the phone now has a rooted lollipop 5.0.1 even though i got a fail in odin.
But i v got very strange stuff going on with my phone :
-First i checked my s/n and imei with phone info and it showed a N910C not N910H
-I dont have a csc code and when i want to check it with phone info this popup shows up :
Error type 2
android.util.AndroidException: Can't connect to activity manager is the system running?
at
com.android.commands.am.Am.onRun(Am.Java:301)
at
com.android.internal.os.BaseCommand.run(Base.Command.java:47)
at
com.android.commands.am.Am. main(Am.java:102)
at
com.android.internal.os.Runtimelnit.nativeFinishInit(Native Method)
at
com.android.internal.os.Runtimelnit.main(Runtimelnit.java:255)
I just dont find the csc code ..
A dm-verity verification failed shows up in the recovery mode

HardBricked my s3 neo gt-i9300i and odin is not working

i bricked my phone but when i tried flashing its stock rom, odin shows repartition error...
n in download mode, it says; device have loaded pit n invalid pit
Me by you turned system & internal storage to F2FS & that is the problem with Odin.
You must give much more accurate description of what happened, with what rom & what is actually working (recovery, ADB) in order that someone can help you.

samsung s4 mini GT-I9195 LTE dead phone

hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
chakroun saifallah said:
hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
Click to expand...
Click to collapse
Hello , i think you wiped your system you have to install another one. Try Lineage Os
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Zac C4rter said:
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Click to expand...
Click to collapse
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
chakroun saifallah said:
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
Click to expand...
Click to collapse
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Zac C4rter said:
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Click to expand...
Click to collapse
i have tried it all the 11 steps and not work. internal storage is 0 MB
i'm using trwp 3.5.0_9.0
after i flashed the SD card with Win32DiskImager and with the debrick.img , everythink now is in the external storage, my problem is i can't access to it, or install zip file with trwp or cmw because i can't mount the partitions in trwp or cwm.
i only can use download mode to flash files by odin
i want to know if i can do it manuelly by termianl commends in trwp .
but how i can know the places of the unmounted partitions ?

A40 - after TWPR i stuck on download mode

Welcome everyone,
I am looking for solution of my issue.
TLDR : I stucked into download mode i cannot shutdown the phone - i am in the loop . - SAmsung A40
Long story i tried recover accidentally erased photos from my wife phone . Around 30% i have been able to recover, but for further getting photos I have make deep scan which also required making a root.
I quckly read some turiorals , dowload the necesary software, make the set up and go to the action.
Mostly i when through youtube tutorial from link below
Unfortunately after successfully loaded TWPR i cannot netiher turn off the phone or opne normaly
i got error message on top
Recovery : Error validation footer. (6)
Custom receovery
VBMETA A405FNXXU3BTK4, 36252767R
Please help - i need to problem ASAP
I can pay or donate money for refugees from Ukraine
OK,
i solved temporary and rom orginal android from samsung, but still i would like to root a phone,
how to flesh in odine .img file.
AS AP recovery.img , but how to load vmeta & boot file ?

Categories

Resources