Database Users

How to flash Huawei Y300 with official rom

Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards

Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex

If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.

what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update

i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??

How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?

HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance

tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?

Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse

I tried the official one but the performance is very low:crying::crying::crying::crying:

Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.

Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.

babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM

hey someone flashed the official rom successfully?

zeroing imei
can you write how to zero imei code

flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>

huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.

falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it

Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app

Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.

[ROM]STOCK[802d]M7C_DWG[Official 4.2.2 RUU 2.17.1401.2]

Hi All,
This is the link to Official 4.2.2 RUU for One Dual SIM 802d [M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.17.1401.2].
After searching here and there finally i have found a Chinese website with some support for One Dual SIM 802d.
Download :
http://pan.baidu.com/share/link?shareid=2076182699&uk=3104298275
I'm also testing some custom rom from the website.
So if anything good rom will be found, then i will post here.
thanks

Is there any update on this...?
Sent from my HTC One dual sim using Tapatalk 4
---------- Post added at 01:06 AM ---------- Previous post was at 01:06 AM ----------
Is it gonna work on Indian versions witu cid 38
Sent from my HTC One dual sim using Tapatalk 4

mahesh_9j said:
Is there any update on this...?
Sent from my HTC One dual sim using Tapatalk 4
---------- Post added at 01:06 AM ---------- Previous post was at 01:06 AM ----------
Is it gonna work on Indian versions witu cid 38
Sent from my HTC One dual sim using Tapatalk 4
Click to expand...
Click to collapse
indian handsets are based on c_dwg ... so its compatible with it ...
yes its not the latest version ... but latest version in RUU availablity ...

So if I want to go back to stock then I have to flash stock recovery then lock the bootloader then flash the ruu? Correct?
Sent from my HTC One dual sim using Tapatalk 4

is it work on WWE HTC ONE non Dual?

mahesh_9j said:
So if I want to go back to stock then I have to flash stock recovery then lock the bootloader then flash the ruu? Correct?
Sent from my HTC One dual sim using Tapatalk 4
Click to expand...
Click to collapse
yes if you are s-off

criszz said:
yes if you are s-off
Click to expand...
Click to collapse
why S-OFF ?? I just have to flash the stock recovery and then lock the bootloader back, then flash the ROM mentioned here.....Am I doing incorrect steps??
Please guide, if required.
Thanks !!
Mahesh

mahesh_9j said:
why S-OFF ?? I just have to flash the stock recovery and then lock the bootloader back, then flash the ROM mentioned here.....Am I doing incorrect steps??
Please guide, if required.
Thanks !!
Mahesh
Click to expand...
Click to collapse
if is the same version of OS you are ok , if you want to downgrade like to be factory stock must be s-off

criszz said:
if is the same version of OS you are ok , if you want to downgrade like to be factory stock must be s-off
Click to expand...
Click to collapse
hi,
i have 4.2.2 out of box and software version is 2.23.720.1 is it possible now tp use this rom to return to stock ? or I have to wait for a new ruu for indian version with cid__038 (india)
regards,
mahesh

mahesh_9j said:
hi,
i have 4.2.2 out of box and software version is 2.23.720.1 is it possible now tp use this rom to return to stock ? or I have to wait for a new ruu for indian version with cid__038 (india)
regards,
mahesh
Click to expand...
Click to collapse
this is 2.17 ruu, i belive you can't use it but you can try, it will give error.

Soul ROM V11.0 link is here, it works great with 802d Indian version of Dual SIM
*MOD EDIT* Link removed due to no permission from Soul Team
Complete credit goes to soul team. I m just putting the link. Hope they don't mind other people using their great ROM.

hope you have permission from soul team to post that here

need stock recovery
Sir, can u upload stock recovery of htc one 802d ....after installing twrp I can't apply OTA update
....so I need stock recovery
Thank you

Hi there I Need stock ruu for 802D tried to download from the chinese site mentioned in this thread but no luck.

Ohh god!! At least one ustom rom found for indian dual sim
Thanks and more roms welcome!! :beer::beer
Does this support hindi language and have all Gapps??
And...
Any updated rom android 4.3+sense5.5 for this indian dual sim version (802d)...???

Anyway , how to download Soul ROM v11 ?

Why 1 1.? 19.5 is latest
Sent from HTC One 802w Dual Sim with my hand...

now 20
:good:

ravinder0003 said:
Hi All,
This is the link to Official 4.2.2 RUU for One Dual SIM 802d [M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.17.1401.2].
After searching here and there finally i have found a Chinese website with some support for One Dual SIM 802d.
Download :
http://pan.baidu.com/share/link?shareid=2076182699&uk=3104298275
I'm also testing some custom rom from the website.
So if anything good rom will be found, then i will post here.
thanks
Click to expand...
Click to collapse
This does not work with Indian 802d models, infact if you apply, it will brick the device.

Is there any 802d m7c_dwg Kitkat?
I want flash back to stock after trying install custom rom but failed :roll eyes:
does anyone have RUU for 802d HTC_044 KitKat, this my HTC GetVar info:
INFOversion: 0.5
INFOversion-bootloader: 2.49.0000
INFOversion-baseband: 1.01.32.0423
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.17.707.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HC3B2MP01xxx
INFOimei: 357607059362xxx
INFOmeid: A1000037AE1xxx
INFOproduct: m7cdwg
INFOplatform: HBOOT-8064
INFOmodelid: PN0751000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4238mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-1f512bb6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
please share the link
stuck on boot loop after trying Flash Custom Rom, forget to backup the stock ROM
but have TWRP inside I try some Custom Rom still cannot, always get "Error executing updater binary in zip"
can help memy HTC cannot use almost a week

Want to update my HTC Desire 816G Dual sim from 4.4.2 to 5.0.2

i have htc desire 816G octa core "taiwan" varient and its complete model number is "HTC D816h" and now it run 4.4.2 and i want to update it to 5.0.2 i download rom form "www.htcdev.com" "WWE" region when i open downloaded "zip" file and it consist of "****.tar.gz" file extenstions and one "zip" file please guide me how to install that file on my mobile

Any one give me suggestion.

asnaeb said:
Any one give me suggestion.
Click to expand...
Click to collapse
did you get any help?

How To Flash MM to HTC Desire 820 Dual Sim

Hello everybody
i need help for upgrade my HTC 820 dual sim to MM
current os is KK 4.4.4 (i flashed it - with xda members help :good: - and for luck it was an official ruu as shown in my phone details below)
i got a notification about 70MB update (i think it for android LP) but when i downloaded it i got a msg that mean my phone's software is modified
any help ??
thanks in advance ..
###################
*** Software status: Official ***
*** RELOCKED ***
A51_DTUL PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-01.01.010_U1030481_08.01.41119
OS-1.22.720.1
eMMC-boot 2048MB OC
Nov 27 2014,12:37:38.90026844
##################

Have u flashed official recovery before downloading software update?

yo_honey said:
Have u flashed official recovery before downloading software update?
Click to expand...
Click to collapse
i didn't use any recovery files .. i used the original

As your device showing s off that's y this error.
And while you HaVe s off u can direct flash any ROM.

Update P9 Lite from Android 6 to 7

Hello everyone, I have a P9 Lite which was issued from Vodafone Europe (originally VNS-L21C02B128), and I'd like to update it to Android 7.
Since none of the stock ROMs I tried would pass the verification when updating via the Project Menu, I found and flashed a newer Android 6 which works fine apparently - build number is currently VNS-L21C900B170.
Trouble is all of the newer ROMs are still not working. During the verification phase, it says they are not compatible with the phone.
Any ideas what is the simplest safest way to get to Android 7 ? Thanks for the help.

P9Late said:
Since none of the stock ROMs I tried would pass the verification
Click to expand...
Click to collapse
Have you tried Service ROMs?
https://androidhost.ru/3za
https://androidhost.ru/56i
P9Late said:
originally VNS-L21C02B128), and I'd like to update it to Android 7.
Click to expand...
Click to collapse
- Unlock the bootloader
- on android 6 rebrand to C432 global
- in TWRP install fullOTA-MF-PV VNS-L21C432B370
- then you can upgrade to a higher version by installing a Service ROM via dload method (it will lock your BL again).
The problem is probably with your current build number - the C900 is fake firmware, incomplete or incompatible. I'm afraid you won't be able to unlock the bootloader or rebrand the phone with this build.

Hello Alf, I did try VNS-L21C02B346 but it didn't work, both with the original and the newer ROM. I also tried the "SERVICE Full Repair VNS-L21 C432B381" from here, also with no luck.
The current B170 ROM was labeled as "VNS-L21C432B170" on the site I got it from, but now it shows as C900. This one updated with no problems via the Project Menu upgrade command, the only one to work so far...
I will see later about unlocking the bootloader thanks.

P9Late said:
The current B170 ROM was labeled as "VNS-L21C432B170"
Click to expand...
Click to collapse
You can't install C432 on C02 and vice versa without changing oeminfo, that's why you now have a C900 region and failed verification.

Thanks but I don't know hot to change oeminfo. Can I use SRK Tool ?
Also is there a free way to unlock the bootloader ? Is it this one ?
Does the phone have to be dissasembled, or is there a software method as well ?
Is dc-unlocker free for phones with android 6 and 7 ?