Database Users

Overclocking your droid2

Hello all, I'm relatively new to the community, but its been such a huge help I wanted to contribute something I hadnt seen yet but something I'm sure most anyone with a droid2 might want to try, so without further ado
~~~~~OVERCLOCKING GUIDE for DROID2~~~~~
!!!WARNING/DISCLAIMER!!!
This process can possibly damage your phone and phone CPU if abused or used incorrectly, and may also cause your phone to lock up and restart and possibly bootloop itself,!!!MAKE BACKUPS!!! and if bootlooping occurs, go into the stock recovery and clear data/factory reset to restore bootup process.
I am not responsible for any damages which may occur. GOODLUCK
~Things you need~
1. To be rooted (works on Froyo 2.2 and Gingerbread 2.3, including CM7 and custom roms)
2. Access to the App Market VIA cell network or wireless internet (downloading overclocking apps)
3. Milestone Overclock and SetCPU (both available in the market to download)
~Steps for Overclocking your phone~
1. Make sure Both apps listed in the needed section have been installed
2. Open up Milestone Overclock and it will look like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Click on the Load module button and it will look like
What we have done thus far, is loaded into the kernel of the OS custom CPU clock settings, which we can edit at will with this application.
4. Set what you want the maximum cpu clock speed and also the vsel setting (hit the button on the bottom left of phone to access this )
The vsel is the voltage used by the cpu so be careful when changing this setting. (the stock voltage is 66 on my droid, others may be different)
5. Once that is done hit ok and then the back button on your phone.
6. Now go into your apps and open up SetCPU which should give you this
7. Click on Autodetect Speeds (Recommended) which will then give you this
8. With the slider bars, you can control the max and min speed of the cpu, so with the top bar, slide it all the way to the right to achieve the new maximum speed you want for your phone.
(its auto set to use max speed on demand and idle down to min speed when not in use)
You can change this usage by switching the scaling from ondemand to performance which will keep the cpu at max speed 24/7.
9. Now that your phone is overclocked, you need to perform a stress test on the cpu to make sure your setting are stable enough to run at the maximum speed you have chosen for any length of time, in order to do this, go into the Info tab in SetCPU and scroll to the bottom of the list in order to find the stress test utility
10. Once you have overclocked your phone, play around with certain apps and the web browser to see if you can tell a speed increase in how fast apps load and how fast content responds.
In case anyone is curious as to the settings I currently use.
~Settings~
Maximum CPU speed = 1.3Ghz/1300Mhz
Voltage = 66 vsel (system default)
Both are set on load at boot and so far I'm completely stable.
If this guide has been helpful in any way, feel free to add to my thanks points

Thanks, worked great

GTA: VICE CITY > TIPS for flawless quality and performance | Screenshots available

How to run GTA: Vice City and other heavy games pretty fast and smother with the Xperia Play
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video Settings
Resolution: 100%
Distance Detail: 28
Visual Effects: Medium(No notable differences with high)
Dynamic Shadows: OFF
Frame Limiter: OFF
Roms that GTA Vice City liked:
(Performance is very close in this roms)
Can work with other roms.
Kernel
LuPus GB v8 or v9 at 1.6GH with Virtuous and Sio. Virtuous is definitely the best governor and safe more battery.
Important thing: leave at least 150 MB free on your internal memory for play without lags.
Advanced tweaks for full speed
Access Lupus Menu via Terminal and choose: Option 5 [Tweak Options]
- Set Option [2] <SQLITE3 Optimization>.
- Set Option [8] <Micro SDcard speed tweak>. Put read cache at 1024 and save setting for apply it in every boot.
Game Version Tested: 1.02
After all, reboot and enjoy!
Screenshots with FPS Meter
Average FPS: 20
Note
In certain parts of the map may occur lags in game, that are not related with the power of the device, but by the bad Android port. The Android version is not developed by Rockstar Games, for that, was bad optimized.

20 fps well flawless means something different for me. 30 fps should be the absolute minimum to play really fluid.

GTA: SAN ANDREAS is locked at 25fps, and is very smoother. 20 is not perfect, but for me, is good enough. For Xplay, more than it, only reduce the resolution. However in various moments the game can get at 25FPS or more.

ZTE AXON 7 (A2017G) CPU Scaling Governor - unknown

Good day everyone!
I have one specific question regarding our CPU governor. I've just installed CPU-Z and tried to check device's specs. Among other pleasing numbers i've figured out one strange thing . CPU Scaling Governor is displayed as unknown . This is quite strange . As far as i know usually there is 'Interactive' governor displayed. Do we have a custom governor version?
P.S. watching how CPU Cores' speeds change , i've noticed that currently there is a stable work of all Cores all the time even with CPU optimization setting enabled (all 4 cores are always active). Usually this depends on CPU governor , so i'm wondering if that is an intentional feature with propriatary governor from ZTE or some kind of BUG?
B04 version used.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

deseandr said:
Good day everyone!
I have one specific question regarding our CPU governor. I've just installed CPU-Z and tried to check device's specs. Among other pleasing numbers i've figured out one strange thing . CPU Scaling Governor is displayed as unknown . This is quite strange . As far as i know usually there is 'Interactive' governor displayed. Do we have a custom governor version?
P.S. watching how CPU Cores' speeds change , i've noticed that currently there is a stable work of all Cores all the time even with CPU optimization setting enabled (all 4 cores are always active). Usually this depends on CPU governor , so i'm wondering if that is an intentional feature with propriatary governor from ZTE or some kind of BUG?
B04 version used.
Click to expand...
Click to collapse
Your fw version is strange for me, I've thought that ZTE skipped B04 version for A2017G.
Sent from my A0001 using Tapatalk.

i'm on b05 and i have unknow too on scaling governor on cpuz..

[Tweak] Battery Saving with Decipher Kernel

Hello people! ... Happy 2017 for all of XDA! ???
I'm using CM12.1 for play games more well than MM & Nougat ROMs … but the battery life is not very good....but then this month I decided to find some APP or a Tweak that would reduce battery consumption too fast.
After a hard search and ....really found nothing more ......I stopped to think .... And if maybe we reduce the screen resolution to increase performance and also lower CPU cores from 4 to 2?
Yes guys, that's exactly what I did ... and then I concluded that the performance will be the same ..... The decreased resolution will stabilize the battery duration with the same performance!
Decipher Kernel ( you need to have Kernel Auditor! )
https://forum.xda-developers.com/mo...kernel-decipherkernel-cm12-1-3-4-108-t3169304
Screen Shift
https://play.google.com/store/apps/details?id=com.sagar.screenshift2
1 - Kernel Auditor ( on Decipher Kernel )
# CPU Hotplug
Intelliplug - Balanced
Hysterisis Value - 16
Impulse Touch - OFF
Max Frequency when screen off - 787mhz
Go in MSM MP Decision and put the maximium of CPU in 2
# I/O Scheduler
Use in internal storage BFQ , and esternal ZEN
128kbps both
2- Screen Shift
When vou installed and open for the first time ,click Cancel
# Resolution
540 x 960
# Density
200
# More Settings
Set on boot √
Display custom display mode during call √
Important
If every time on Boot if the Screen Density looks very small ,go to Screen Shift and active him!! Some ROMs not support Resolution changing on Set On Boot!
I highly recomend you to use Greenify ( Root Mode )... And LSpeed!! There awesome Tweaks!!
I ask you to test and give me feedback !! I would even test the battery run time but it is bad due to excessive use of VPN for 2 years ....unfortanely?
Sorry my bad english ,i'm Brazilian!!

This serves for any Cellphone with a Custom Kernel and same Hotplug!

So i did a test with your setting normally with 4 core's i get 5hrs sot max. Even with your setup i am getting max 5hrs sot so this make no diffrence was using Halogen kernel & Lineageos 14.1 Jan build
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Moto G 2014 using Tapatalk

Ultra Game Mode ✓

We all love to play games on our phone and get 'need, consoles, or apparatuses' to keep our experiences at the highest level. And we want to get the highest FPS values on our phone and play the highest quality while playing the game and spend a pleasant time. Sometimes we are curious on the device that is going on and types of attractions. 'Battery graphics servers, Mobility, which is the Background, we also want to control them.'
I will share super ultra-game modes and extra settings with you! This subject will be a bit (technical) and (detailed and long subject). So you follow the patient ones
What are we going to do first?
We will look at GPUWatch.
What is gpuwatch; Your GPU values are the name of the screen you can see.
The processor speed offers us information about the module that allows us to see the graphic interfaces.
So how can we enable this module?
We will proceed in steps
Settings
Developer options
Gpuwatch to the open position
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what does these settings indicate us?
FPS: Number of frames in seconds
CPU Graphics: Displaying the processed data with graphics
CPU Load: Graph showing CPU load
These settings, and graphics (not for normal users) so; These graphics are for those who wonder.
I'm opening Game Launcher. Press the Settings section icon U "" Game Performance section .
In this section, we will block notifications during the game, your game experience is disruption ..! We will activate navigation movements. We will close Bixby. Settings are as follows:
We have come to the most important part .. We will do the game performance part as follows. "Focused by Performance"
Rank came to the top of our game experiment to the top!
We enter the Galaxy Store. We have a lot of add-on and modes to download this application of Samsung.
Game Booster: The game is one of the most important add-ons that allow the device to run more stable and faster.
With Priority Mode, GameBoster will help our business
To receive maximum FPS, the Balance we use (MB / GB) show data. Graphical upgrade. It has battery savings and other custom settings ..
Let's come my private settings.
Settings> Developer options.
Force creating GPU
What is the force of creating GPU?
The graphics processor allows us to obtain high efficiency in the game by force this graphics processor to exceed the minimum levels of games. I don't want to enter very technical letters. Faster animation becomes more efficient for the system.
Settings> Developer options
6X MSAA Activate
4x What is MSAA?
Increases the graphic quality in OpenGL ES 2.0 applications ..
Android, Open Graphics Library (OpenGL), especially the OpenGL ES API with high-performance 2D and support for 3D graphics. OpenGL is a cross-platform graphical API indicating a standard software interface for 3D graphics processing equipment
Settings> Developer Options> System Monitoring
The number of memories per CPU is: 65.535 KB. Open the long tracks.
These settings; Old after the game is over ..
Let's come to the golden advice.
Mute notifications
Turn off power saving mode
Disable animations (I told him in a position. In acceleration)
Turn off the background applications
Keep the clipper clean.
All the contents in the subject belong to me. Please don't forget to like, and comment! I'm making content shares for Samsung Members, I've shared a lot of topics! Some of those:
Acceleration
The solution of bluetooth problems
Construction of theme
Color added to notifications
Saving search.
Hidden