Database Users

[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore - Elephone P9000 Guides, News, & Discussion

In this Thread i will explain how to set up MTK drivers and Flashtools.
Guideline:
Post #1 : Set up MTK drivers in Windows 8 / 8.1 / 10
Post #2 : Use Flashtools for MTK Devices
Post #3 : How to Root Stock Rom
Post #4 : Windows 10 MTK Drivers installation ( just in case post #1 dont work )
Post #5 : Lost IMEI Backup​
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
How to Install MTK drivers in Windows 8 / 8.1 / 10
what we need:
MTK Vcom Preloader Driver 2.0
Download : https://www.androidfilehost.com/?fid=24438995911977169
First thing we need is to Disable the Signed Driver verification on Windows :
To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager.
The easiest way to bring this screen up is using this secret trick.
Hold down the SHIFT key while you click Restart.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once your computer has rebooted you will be able to choose the Troubleshoot option.
Then head into Advanced options.
Then Startup Settings.
Since we are modifying boot time configuration settings, you will need to restart your Computer one last time.
After restarting your computer a second time,
choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
That’s all there is to it. Your PC will then reboot and you will be able to install unsigned drivers.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Now its Time to open SP_Driver_v2.0.zip and start the DriverInstall.exe
it will open the install prompt . Press okay and dont change the installation path
Code:
C: // program files / Mediatek / Driver Package
during the installation it will start the verification window security.
Click on Install this driver software anyway
There will be an Error Message . - We Ignore it !
-Now Open your Device Manager and leave it open.
-Power Off your Phone and connect it with your Pc.
-you will see Under ports ( COM & LPT ) a Preloader unknown device
right click on there and click on Driver update/installation.
-Choose manually search for drivers
-Browse to C:// program files / Mediatek / Driver Package and apply.
-If all went good you have successfully installed the MTK Vcom Drivers. :good:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>​

How to Use Flashtools
i use SP_Flash_Tool_Windows_v5.1520.00.000 and never had a problem with it.
Its for most all MTK Phones and for all Elephone Devices
Download Link: https://www.androidfilehost.com/?fid=24438995911977217
- Extract the Flashtool zip folder to your Desktop
- Click flash_tool.exe to open the Tool
- You will see two "folder buttons" Download agent and Scatter-loading
- Into Download agent place the MTK_AllInOne_DA.bin file .
its in your Flashtools folder
- Into Scatter-loading place the Scatter.txt
All Stock Roms / Custom Recoverys have one Scatter.txt in their Zip files.
- Make sure that every partition is checked
-IMPORTANT NOW, Flashing Part-
-Power Off your Device!
-Press on the Download Button!
-Connect your Device with PC and wait until all is flashed
-you will see a Green Mark when all is done
-Disconnect your Device and press Power button to Reboot.
:fingers-crossed::good::fingers-crossed:
------------------------------------------------------------------------------------------------------------------------------------------------​

How to Root Stock Rom
-If you want to Root your prefered Stock Rom
-Place SuperSU into your Sdcard
-Flash a Custom Recovery with Flashtools and its Scatter.txt
-Hold Vol+ and Power to get into Bootloader Menu
-Navigate with Vol+ and apply Recovery with Vol-
-Flash Supersu.zip
-Reboot
Stock Roms:
Stock ROM Elephone P9000_Android 6.0_20160315 Link: http://bbs.elephone.hk/thread-9967-1-1.html#[email protected]
CWM Recovery:
Link : https://www.androidfilehost.com/?fid=24459283995304518
100% bug free Supersu v.2.46.zip
https://download.chainfire.eu/696/SuperSU/​

Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial
To determine the version of Windows 10 that you have (32 bit or 64 bit):
- Right-click on Start then click on System
- In the System window that opens, in System section, you will find your version of Windows next to System type
To disable Windows 10 64 bit driver signature enforcement:
- On your 64 bit Windows 10 desktop click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- After restart you can proceed with the unsigned MTK drivers installation for your 64 bit Windows
- After you install the unsigned drivers, to use them again in the future, you have to repeat this procedure
To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:
- Download the drivers *.zip archive and extract the folder from inside on to the desktop:
https://www.androidfilehost.com/?fid=24269982087012126
Right-click on Start then click on Device Manager
In the Device Manager Window click on the first item – your computer name
Click on Action then Add legacy hardware
On the Welcome to the Add hardware Wizard window click on Next button
Select Install the hardware that I manually select from a list (Advanced) and then click on Next button
Click on Show All Devices then on Next button
In the Add Hardware window click on Have Disk… button
In the Install From Disk windows click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning
Select the version of the driver according to your Windows 10 version – x64 for 64 bit and x86 for 32 bit and click Open button
Click the OK button to load the driver
From the list of drivers select MTK USB Port and click on Next button
If a red warning window will open, click on Install this driver software anyway
This action will add the following drivers in to the operating system:
- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)
Now we need to remove the device that we have installed but leave the drivers in the operating system.
To do that, in the Device Manager window we expand Ports (COM & LPT) section
Right-click and click Uninstall on the MTK USB Port
- In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
- You need to leave the drivers in the operating system and only remove the device that you added
- Click on the OK button to finalise
Now, when you will connect your turned off MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the Download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.
Download SP Flash Tool v3 & v5 – Latest versions:
http://laurentiumihet.ro/technology/download-sp-flash-tool-v3-v5-latest-versions/
TUT found here : http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
cheers​

Lost IMEI Restore
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI. I will split the tutorial into two parts.
BACKING IMEI :
-First step before performing all these things is that your phone should be rooted.
When your phone is in normal state with everything functioning install Root explorer and navigate to the below location
Code:
>ROOT>DATA>NVRAM>MD>NVRAM>NVD_IMEI>MP0B_001
-Now copy this MP0b_001 file to your SD card or PC whichever place you feel the file we be safer.
-Now download MTK Droid tools .
-Now extract the zip file and open the MTK droid tools exe file.
-Now in your phone turn on USB Debugging by going to Settings->About phone-> Developer options and there turn on USB debugging.
-Now connect your phone and MTK droid tools should be able to detect your phone. U should see a window like this appearing after your
phone has been detected.
-Now press the ROOT button present in lower right corner. When it asks Supersu grant in your mobile click allow. After MTK droid gets
access u should see a green colour box appearing in the lower left corner which means u have correctly granted access to MTK droid.
-Now click on the IMEI/Nvram tab. A window should open and click backup NVRAM and MTK droid tools would take a backup of NVram in
its folder.
RESTORING IMEI :
-Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through
Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI.
-Now paste that file and replace the one present there. Set the permissions for that file as RWER-ER-E. Now reboot your phone and you
should be able to get your IMEI back.
If you still haven’t got IMEI open MTK droid tools and connect your phone and press ROOT again and give MTK droid tools root access.
-Now click on IMEI/Nvram tab and select Restore option and restore the NVram backup which you took earlier. Now reboot your phone and
you should be able to get your IMEI.
Extreme method :
-After performing all the above if you haven’t still got IMEI. Now switch off your phone and open SP Tools and connect your phone.
Click on format and format your whole phone. ( This wipes whole of the phone including NVram region ).
-Now flash stock ROM through SP Tools and after it completes start up your phone. ( Don’t be surprised. Your IMEI will still be in lost state
only ). Now root your phone.
-After successful rooting now connect your phone to MTK Droid tools and again press ROOT button and grant root access to MTK Droid
tools. Now click on IMEI/NVram tab.
-Now as you see in the image above you can see two boxes IMEI1 and IMEI 2. Now enter your device IMEI numbers manually in those two
boxes.( You can get your IMEI no’s from your phone box ). Now click replace IMEI. Now reboot your phone and you should be definitely able
to get your IMEI restored.
MTK DROID TOOLS LINK : https://www.androidfilehost.com/?fid=24438995911972546
found: http://www.androiddevs.net/restoring-lost-imei-mtk-phone/​

MTK droid tool doesn't recognize my device. I turned on USB debugging and drivers are installed. Can somebody help ?

I'm having same issue here on Win10 installed the drivers etc... using latest SP Tools plug phone in and try and put recovery as a download nothing happens.
EDIT: Nvm got it working realised I was downloading and plugging in the phone in the wrong order.

Windows defender says MTK Vcom Preloader Driver 2.0 has got a trojan: Win32/Spursint.A!cl but i downloaded drivers from http://spflashtool.com/ instead.
False warning?
/#LOUDmouth#

#LOUDmouth# said:
Windows defender says MTK Vcom Preloader Driver 2.0 has got a trojan: Win32/Spursint.A!cl but i downloaded drivers from http://spflashtool.com/ instead.
False warning?
/#LOUDmouth#
Click to expand...
Click to collapse
False positive

kopasz93 said:
MTK droid tool doesn't recognize my device. I turned on USB debugging and drivers are installed. Can somebody help ?
Click to expand...
Click to collapse
I have a solution for restoring IMEI:
In the dialer: *#*#3646633#*#*
OR
download "MTK engineering mode" app and start it
it will open engineering mode:
1/ go to "Connectivity" tab
2/ go to "CDS information"
3/ go to "Radio information"
4/ then select "Phone 1"
5/ At the top there is a command line "AT+" in it
6/ type AT+EGMR=1,7,"your imei number" (for example: AT+EGMR=1,7,"012345678901234")
7/ then hit "Send at command" (if you got error try to put space between "AT" and "+")
8/ go to "Phone 2" and type in the command line: AT+EGMR=1,10,"your imei"
9/ hit "send at command"
10/ restart your phone and it should work
You can check if it changed at Settings -> About Phone -> Status -> IMEI information
If your forgot your original IMEI numbers you can find them on the box of the phone

MTK droid tool recognizes my phone, but do not get the green button so root error. Granted permission in supersu.

If anyone is still struggling (like me) with the error: Initializing scatter file failed. Please check the name of the scatter which you load is legal
i solved by using SP Flash Tool 5.1552.00.000 downloaded from
https://mega.nz/#!ixdnhDLK!oOaAsJrcvJI0vH3fTsUOYjtDxQ_HT61E-_iuo6fTuKk
as specified in elephone forum flashing guide
http://bbs.elephone.hk/thread-1037-1-1.html#.VWgkX_RAU-0

Use latest v5.162 version
Gesendet von meinem P9000 mit Tapatalk

Linux way?
Is there a way to root my brand new P9000 in Linux?

I flashed the linked SuperSU 2.46 with TWRP but when i start the SuperSU App it says that there is no su-file installed - any ideas?

sundawn said:
I flashed the linked SuperSU 2.46 with TWRP but when i start the SuperSU App it says that there is no su-file installed - any ideas?
Click to expand...
Click to collapse
Why on earth are you using such an old version of SuperSU?
You are probably using TWRP 3.0.0 which does not work on newer ROM versions. Try flashing TWRP 3.0.2-1.

Well i used it because it is said to work in this tutorial
The newer one didnt work either, as you said i think its the TWRP 3.0.0
I would like to download this http://www.needrom.com/download/twrp-3-0-2-1-4/
but i dont get any registration mails, tried to register with 2 different emails half an hour ago...
The version here on XDA is said to be only for P9000 Lite.
Edit: Ok got my login by using the forgot password function - the linked TWRP 3.0.2 and installing SuperSU 2.65 works.
Thanks!

also would like to know, can we fastboot the recovery as per all the other android phones i've used? And then custom ROM to our hearts content?

n1ck75 said:
also would like to know, can we fastboot the recovery as per all the other android phones i've used? And then custom ROM to our hearts content?
Click to expand...
Click to collapse
Yes. In Settings / developersettings enable oem. unlock Bootloader.
Then reboot to Recovery and go to power/ reboot to fastboot.
Then Unlock your Bootloader with the fastboot oem Unlock command.
After that you can use fastboot.
P.s: i didnt did that. But it should work
Gesendet von meinem P9000 mit Tapatalk

skeleton1911 said:
Yes. In Settings / developersettings enable oem. unlock Bootloader.
Then reboot to Recovery and go to power/ reboot to fastboot.
Then Unlock your Bootloader with the fastboot oem Unlock command.
After that you can use fastboot.
P.s: i didnt did that. But it should work
Gesendet von meinem P9000 mit Tapatalk
Click to expand...
Click to collapse
Thanks for the prompt reply;
Have got to the fastboot oem unlock part, gives option for
Vol Up - Unlock
Vol Down - Cancel
Vol Up doesn't work? Can only Vol Down

Related

!!!THIS IS NOT A ROOTING GUIDE!!!
This pack contains everything you need to connect and use your nexus s on your pc
Will work on XP, Vista, 7
!!!HOWEVER 7 HAS THE BEST SUCCESS!!!
included:
* Fastboot
* ADB
* USB Drivers (32bit and 64bit)
Links:
SDK:
http://www.fileserve.com/file/RZqMfeC (sdk, fastboot, adb)
Mirror:
http://hotfile.com/dl/92897052/df7338b/SDK.rar.html
Direct Link - No wait, ads, popups:
http://mazodude.comze.com/ -down atm (have to reup)
DRIVERS:
http://www.fileserve.com/file/5bgRBX5 (PDAnet x86 and x64 which are the fastboot drivers plus android sdk drivers)
Mirror:
http://hotfile.com/dl/92897696/7ae5290/drivers.rar.html
Direct Link - No wait, ads, popups:
http://mazodude.comze.com/ -down atm (have to reup)
To be able to install drivers you have to have your phone booted into fastboot and connected via usb (Thanks to mmas0n)
How to force drivers to install:
Thanks to gravis86
WARNING: SELECTING THE WRONG DRIVER TO A DEVICE MAY BREAK THINGS...
1. Control Panel > Administrative Tools > Computer Management >Device Manager
2a. NS Right-Click "Android 1.0", and click "Update Driver Software..."
2b. NS4G Right-Click "Nexus s", and click "Update Driver Software..."
3. Click "Browse my computer for driver software"
4. Click "Let me pick from a list of device drivers on my computer"
5. Click "Have Disk..."
6. Browse to folder containing the driver, then click OK
7. It will show a list of drivers contained in that folder, select the appropriate one, and click next.
8. It might tell you the driver is unsigned / not verified to work / for the wrong device, etc. As long as you are sure it is the correct driver, then install it. Remember, you are smarter than Windows.
How to install ADB and Fastboot:
1. download and place in the root of your C:\ drive
2. extract here (not into a sub folder)
3. now open up control panel
4. find system
5. goto advanced settings
6. goto environmental variables
7. in the box that says "system variables" scroll down to find a variable "Path"
8. highlight it
9. click edit
10. add this to the end
;C:\android\tools
Click to expand...
Click to collapse
yes the ; is needed
11. click ok
Now when you open cmd (command prompt) you can use "adb" or "fastboot" anywhere with out locating the folder first
You should be able to do this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I have helped you please hit the thanks button

I have followed the directions to the letter and when I type fastboot devices it just goes back to command prompt. I tried typing fastboot oem unlock and it just said waiting on device. Adb devices typed produces "list of devices attached" I boot the phone into fastboot mode and and the usb is plugged in but I keep getting the same results. Am I preparing the phone incorrectly?The adb worked with my Vibrant but the fastboot failed there as well. I would greatly appreciate any and all help you may offer. As I am sure you can tell I am another one of those ignorant nubies.LOL

have you installed the usb drivers?
you will have to force them to install

mazodude said:
have you installed the usb drivers?
you will have to force them to install
Click to expand...
Click to collapse
Yes I have. adb works with my Vibrant but fastboot does not and neither one works with the Nexus s. I have read and reread and followed directions but nothing seems to work. Should I be looking to do something on the phone other than booting into fastboot mode? The Nexus S shows fastboot mode at the top of the screen and I have assumed that I just use the computer from there. On my Vibrant booting into recovery does not show anything about fastboot. I really do appreciate your help I am trying very hard to learn quickly so I can be of some help instead of a burden
I don't know how to force them to install. I went in an opened the folder and I assume they were installed. I do have usb debugging enabled
Edit Just copied usb drivers to C:\android and c:\android/tools and still the same results. I have done everything I can think of but i guess I am not getting the drivers installed properly.

to force them, go into control panel-> administrator tools->computer management
then goto device manager in the sidebar.
I cant remember what the device is called but you should know when you find it.
right click and hit update drivers.
hit browse for drivers and find the drivers in C:\android\google-usb_driver
Note: phone has to be in fastboot to be able to install the drivers
edit: I forgot the drivers opps
link:
http://www.fileserve.com/file/ZM9hbvH
edit: this video might help
http://theunlockr.com/2010/12/17/how-to-root-the-samsung-nexus-s/

I just downloaded the drivers and placed them in C:\android and then went into device manager and hit update drivers and then browse for drivers and it said no drivers found. I was in C:\android/google-usb drivers.

have a look in the post above i just posted a link to a vid
edit: are you using 64-bit?

no 32 bit I will look for the video. Thanks so much for your kind and patient help!!!

I think there is a trick in the video to get it to see the device in fastboot
edit: there are some drivers here
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/

there is no video but I did read the directions and I believe I have done all that they state. Should my PC say installing drivers when I plug my phone in? It did and said one driver failed to install.

yea.
If you don't see a video (at the top) disable ad blocking
also the driver that failed try to force it (using previous method)
If anybody could help that would be great, then I will add it to the first post

Followed this guide and unlocked and rooted my friends Nexus S.
http://theunlockr.com/2010/12/17/how-to-root-the-samsung-nexus-s/

@shaolinmastr well that's good to hear

I still have no success installing the drivers. Are you sure that the drivers were in the last zip file? I have gone over and over it for the last 6 hours and am at the same place I started. NO adb and no fastboot on the Nexus S and adb working on Vibrant.but no fastboot . I guess it is time to take the Nexus S back and get a refund. It is not worth the lack of results with so much effort. Thanks for you help.

Save yourselfs the hassle and just install PDAnet and you should get the drivers to work.

I was having this same problem and used pdanet to get the correct nexus s drivers. You can dload pdanet to your PC and just plug your phone in via USB andfollow the directions.

So tmello56, pdanet worked for you?
If so I will extract the drivers and add them to the first post

WARNING: SELECTING THE WRONG DRIVER TO A DEVICE MAY BREAK THINGS...
Sometimes Windows needs to be forced to use a driver that we know works, but Windows thinks doesn't. This is similar to what mazodude posted, but is just a few steps further. To do this:
1. Control Panel > Administrative Tools > Computer Management >Device Manager
2. Right-Click "Unknown Device" or whatever it's called, and click "Update Driver Software..."
3. Click "Browse my computer for driver software"
4. Click "Let me pick from a list of device drivers on my computer"
5. Click "Have Disk..."
6. Browse to folder containing the driver, then click OK
7. It will show a list of drivers contained in that folder, select the appropriate one, and click next.
8. It might tell you the driver is unsigned / not verified to work / for the wrong device, etc. As long as you are sure it is the correct driver, then install it. Remember, you are smarter than Windows.
9. WIN!!!

@gravis86, very good explination will post in 1st post

Just wanted to post my results...
I was using the correct drivers, but was installing them while the phone was booted and connected. I could use ADB and mount the file system, but could not use fastboot. I then discovered that if I installed the drivers while the phone was booted into the bootloader and connected, it detected the device differently and fastboot worked.
Now rooted + custom recovery. Awesome.

Yes, so we all have got the latest and greatest of all windows. But does it come with problems to your rooted phone? Yes it does!
While you connect your rooted unlocked phone in bootloader/fastboot mode, It will likely show a “Windows USB Device (Device failed enumeration)” error if you go upto Device Manager. I’ve made a step-by-step guide for a little fix which I found working on Intel Machine with USB 3.0. I don’t know whether it will work for any other machine so try it at your own risk.
Install your default device drivers (For HTC, Install the HTC Sync Manager, For Sony, Use the ones you got in flashtool, etc)
If you are using Windows 8.1, use this for HTC drivers.
*NOTE* The instructions from Step 2-6 are only for machines with an Intel eXtensible Host Controller. Look for the Intel(R) USB 3.0 eXtensible Host Controller under Universal Serial Bus controllers in Device Manager.
Download Intel Official Drivers from the following link. Extract the zip file to a known location.
Download the following 2 files which have been modified to work on Windows 8 & 8.1
File 1
File 2
Now we are going to replace these two files which you have downloaded with the original ones. Copy the two files, and head over to the following directory in the zip file you extracted in Step 2.
“Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver\Drivers\Win7\x64″
Copy the two files here. Accept any warning which shows by hitting ‘Replace’
Now we have to disable the default Driver Signing enforcement which Microsoft has inbuilt into Windows 8 and 8.1. To do so You have to do the following
Press Windows Key + R (or go to Run)
Type “shutdown.exe /r /o /f /t 00″
Go to Troubleshoot –> Advanced options –> Start Up Settings –> Restart
After a computer soft reboot, hit Option 7 (Disable driver signature enforcement)
Restart your PC
When the Windows starts, go to run, and type “devmgmt.msc” and hit enter.
[showmyads]
Go to Universal Serial busses at the end and double click “Intel USB 3.0 eXtensible controller”. Click on Drivers in the New window which opens.
You should see that the Drivers are provided by Microsoft.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now click “Update Driver” and then select “Browse my computer for driver software”. Next choose “Let me pick from a list of device drivers on my computer” and select “Have Disk”.
In the Window that pops up titled “Install From Disk” choose “Browse” and navigate to the location where we replace the original inf’s with the two modified .inf files. Select iusb3xhc.inf and click ok.
Ignore all warnings and install the drivers.
After installing, Reboot the computer with the same procedure as Step 6 & 7.
On opening the device manager, you should see an Unknown device. If you already had one before, you need to cross-check every unknown device to find the one we need.
Double click each such device and go to the 3rd tab “Details”. Find the Value “VID_8086″
After finding the correct device, choose “Update Driver” then click “Browse my computer”, Windows will ask you to identify the type of device, scroll down and select “Universal Serial Bus Devices”.
Click next, choose “Have Disk”, “Browse” and select the modified iusb3hub.inf that we placed in the same folder earlier. Ignore all warnings and install the drivers.
[showmyads]
Restart the computer normally and look at the driver tab for the “Intel(R) USB 3.0 eXtensible Host Controller” and the “Intel(R) USB 3.0 Root Hub” to confirm that you are now running the Intel drivers instead of the Microsoft ones.
You are now done. Try checking to see if the fastboot drivers works for you or not!
Happy Flashing!
Copied from http://www.droid-now.com/2013/10/fix-working-fastboot-drivers-windows-8-1-x64/

Just a note, that Development section should only contain projects made by by you for Android phones. This fits better in General section.

Well, will try now, I have this problem so that I can try new rom

For those without USB 3.0 ports or if it doesn't work for you.. just download ubuntu, put it on a USB stick and start it up in live mode, then use this fastboot binary: http://d-h.st/vsJ
No need for drivers or anything, just make sure you use "sudo fastboot" or it won't work.

DemonicHawk said:
For those without USB 3.0 ports or if it doesn't work for you.. just download ubuntu, put it on a USB stick and start it up in live mode, then use this fastboot binary: http://d-h.st/vsJ
No need for drivers or anything, just make sure you use "sudo fastboot" or it won't work.
Click to expand...
Click to collapse
Microsoft will be releasing an update that contains the fastboot drivers for Windows 8.1 so just sit back, relax and wait for the update notification.
僕のLT18iから送られてきた

popthosegaskets said:
Microsoft will be releasing an update that contains the fastboot drivers for Windows 8.1 so just sit back, relax and wait for the update notification.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Source?

Someguyfromhell said:
Source?
Click to expand...
Click to collapse
trust he is referring Windows 8.1 Update 1 which will be released officially in April. anyway if that the update then the leaked version already in file hosting sites. unfortunately i couldn't complete the update since one KB update failed to get updated.

Someguyfromhell said:
Source?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2598155
Not sure if he is legit though.

Fixed with Windows 8.1 update 1 .. i tested it myself .
Check : http://forum.xda-developers.com/showthread.php?p=50207361

Someguyfromhell said:
Source?
Click to expand...
Click to collapse
I copied this from another site , and the link is on the end of the thread

Microsoft Solution to fastboot driver in windows 8.1
Hi All,
Just download and install the microsoft update for all issues with fastboot...
http://download.microsoft.com/downl...DBD-B6FD4BB8ABA2/Windows8.1-KB2917929-x64.msu

good job！

thanks for sharing

It worked!
Thanks a lot, it worked!

DiogoCMartins said:
Yes, so we all have got the latest and greatest of all windows. But does it come with problems to your rooted phone? Yes it does!
While you connect your rooted unlocked phone in bootloader/fastboot mode, It will likely show a “Windows USB Device (Device failed enumeration)” error if you go upto Device Manager. I’ve made a step-by-step guide for a little fix which I found working on Intel Machine with USB 3.0. I don’t know whether it will work for any other machine so try it at your own risk.
Install your default device drivers (For HTC, Install the HTC Sync Manager, For Sony, Use the ones you got in flashtool, etc)
If you are using Windows 8.1, use this for HTC drivers.
*NOTE* The instructions from Step 2-6 are only for machines with an Intel eXtensible Host Controller. Look for the Intel(R) USB 3.0 eXtensible Host Controller under Universal Serial Bus controllers in Device Manager.
Download Intel Official Drivers from the following link. Extract the zip file to a known location.
Download the following 2 files which have been modified to work on Windows 8 & 8.1
File 1
File 2
Now we are going to replace these two files which you have downloaded with the original ones. Copy the two files, and head over to the following directory in the zip file you extracted in Step 2.
“Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver\Drivers\Win7\x64″
Copy the two files here. Accept any warning which shows by hitting ‘Replace’
Now we have to disable the default Driver Signing enforcement which Microsoft has inbuilt into Windows 8 and 8.1. To do so You have to do the following
Press Windows Key + R (or go to Run)
Type “shutdown.exe /r /o /f /t 00″
Go to Troubleshoot –> Advanced options –> Start Up Settings –> Restart
After a computer soft reboot, hit Option 7 (Disable driver signature enforcement)
Restart your PC
When the Windows starts, go to run, and type “devmgmt.msc” and hit enter.
[showmyads]
Go to Universal Serial busses at the end and double click “Intel USB 3.0 eXtensible controller”. Click on Drivers in the New window which opens.
You should see that the Drivers are provided by Microsoft.
Now click “Update Driver” and then select “Browse my computer for driver software”. Next choose “Let me pick from a list of device drivers on my computer” and select “Have Disk”.
In the Window that pops up titled “Install From Disk” choose “Browse” and navigate to the location where we replace the original inf’s with the two modified .inf files. Select iusb3xhc.inf and click ok.
Ignore all warnings and install the drivers.
After installing, Reboot the computer with the same procedure as Step 6 & 7.
On opening the device manager, you should see an Unknown device. If you already had one before, you need to cross-check every unknown device to find the one we need.
Double click each such device and go to the 3rd tab “Details”. Find the Value “VID_8086″
After finding the correct device, choose “Update Driver” then click “Browse my computer”, Windows will ask you to identify the type of device, scroll down and select “Universal Serial Bus Devices”.
Click next, choose “Have Disk”, “Browse” and select the modified iusb3hub.inf that we placed in the same folder earlier. Ignore all warnings and install the drivers.
[showmyads]
Restart the computer normally and look at the driver tab for the “Intel(R) USB 3.0 eXtensible Host Controller” and the “Intel(R) USB 3.0 Root Hub” to confirm that you are now running the Intel drivers instead of the Microsoft ones.
You are now done. Try checking to see if the fastboot drivers works for you or not!
Happy Flashing!
Copied from http://www.droid-now.com/2013/10/fix-working-fastboot-drivers-windows-8-1-x64/
Click to expand...
Click to collapse
I just did a search for this and installed it and and boom saw my phone VZW HTC One M8
Media Feature Pack for N and KN versions of Windows 8.1
worked for me anyway

Unable to find another unknown device
DiogoCMartins said:
Yes, so we all have got the latest and greatest of all windows. But does it come with problems to your rooted phone? Yes it does!
While you connect your rooted unlocked phone in bootloader/fastboot mode, It will likely show a “Windows USB Device (Device failed enumeration)” error if you go upto Device Manager. I’ve made a step-by-step guide for a little fix which I found working on Intel Machine with USB 3.0. I don’t know whether it will work for any other machine so try it at your own risk.
Install your default device drivers (For HTC, Install the HTC Sync Manager, For Sony, Use the ones you got in flashtool, etc)
If you are using Windows 8.1, use this for HTC drivers.
*NOTE* The instructions from Step 2-6 are only for machines with an Intel eXtensible Host Controller. Look for the Intel(R) USB 3.0 eXtensible Host Controller under Universal Serial Bus controllers in Device Manager.
Download Intel Official Drivers from the following link. Extract the zip file to a known location.
Download the following 2 files which have been modified to work on Windows 8 & 8.1
File 1
File 2
Now we are going to replace these two files which you have downloaded with the original ones. Copy the two files, and head over to the following directory in the zip file you extracted in Step 2.
“Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver\Drivers\Win7\x64″
Copy the two files here. Accept any warning which shows by hitting ‘Replace’
Now we have to disable the default Driver Signing enforcement which Microsoft has inbuilt into Windows 8 and 8.1. To do so You have to do the following
Press Windows Key + R (or go to Run)
Type “shutdown.exe /r /o /f /t 00″
Go to Troubleshoot –> Advanced options –> Start Up Settings –> Restart
After a computer soft reboot, hit Option 7 (Disable driver signature enforcement)
Restart your PC
When the Windows starts, go to run, and type “devmgmt.msc” and hit enter.
[showmyads]
Go to Universal Serial busses at the end and double click “Intel USB 3.0 eXtensible controller”. Click on Drivers in the New window which opens.
You should see that the Drivers are provided by Microsoft.
Now click “Update Driver” and then select “Browse my computer for driver software”. Next choose “Let me pick from a list of device drivers on my computer” and select “Have Disk”.
In the Window that pops up titled “Install From Disk” choose “Browse” and navigate to the location where we replace the original inf’s with the two modified .inf files. Select iusb3xhc.inf and click ok.
Ignore all warnings and install the drivers.
After installing, Reboot the computer with the same procedure as Step 6 & 7.
On opening the device manager, you should see an Unknown device. If you already had one before, you need to cross-check every unknown device to find the one we need.
Double click each such device and go to the 3rd tab “Details”. Find the Value “VID_8086″
After finding the correct device, choose “Update Driver” then click “Browse my computer”, Windows will ask you to identify the type of device, scroll down and select “Universal Serial Bus Devices”.
Click next, choose “Have Disk”, “Browse” and select the modified iusb3hub.inf that we placed in the same folder earlier. Ignore all warnings and install the drivers.
[showmyads]
Restart the computer normally and look at the driver tab for the “Intel(R) USB 3.0 eXtensible Host Controller” and the “Intel(R) USB 3.0 Root Hub” to confirm that you are now running the Intel drivers instead of the Microsoft ones.
You are now done. Try checking to see if the fastboot drivers works for you or not!
Happy Flashing!
Copied from http://www.droid-now.com/2013/10/fix-working-fastboot-drivers-windows-8-1-x64/
Click to expand...
Click to collapse
The second time I restart my pc and go to device manager, There is no Unknown device so the procedure stays incomplete. What to do? Thanks in advance
---------- Post added at 09:22 PM ---------- Previous post was at 08:47 PM ----------
vipinpvarghese said:
Hi All,
Just download and install the microsoft update for all issues with fastboot...
http://download.microsoft.com/downl...DBD-B6FD4BB8ABA2/Windows8.1-KB2917929-x64.msu
Click to expand...
Click to collapse
Could not Install this update.. Error "This update is not applicable for your computer"

The update is only for 64-bit (also known as x64) version of Windows 8.1.

vipinpvarghese said:
Hi All,
Just download and install the microsoft update for all issues with fastboot...
http://download.microsoft.com/downl...DBD-B6FD4BB8ABA2/Windows8.1-KB2917929-x64.msu
Click to expand...
Click to collapse
shows it is not for me..i run 8.1 pro

paarthdesai said:
shows it is not for me..i run 8.1 pro
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/dro...er-fix-windows-8-1-update-2-fastboot-t2831385

DiogoCMartins said:
Yes, so we all have got the latest and greatest of all windows. But does it come with problems to your rooted phone? Yes it does!
While you connect your rooted unlocked phone in bootloader/fastboot mode, It will likely show a “Windows USB Device (Device failed enumeration)” error if you go upto Device Manager. I’ve made a step-by-step guide for a little fix which I found working on Intel Machine with USB 3.0. I don’t know whether it will work for any other machine so try it at your own risk.
Install your default device drivers (For HTC, Install the HTC Sync Manager, For Sony, Use the ones you got in flashtool, etc)
If you are using Windows 8.1, use this for HTC drivers.
*NOTE* The instructions from Step 2-6 are only for machines with an Intel eXtensible Host Controller. Look for the Intel(R) USB 3.0 eXtensible Host Controller under Universal Serial Bus controllers in Device Manager.
Download Intel Official Drivers from the following . Extract the zip file to a known location.
Download the following 2 files which have been modified to work on Windows 8 & 8.1
Now we are going to replace these two files which you have downloaded with the original ones. Copy the two files, and head over to the following directory in the zip file you extracted in Step 2.
“Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver\Drivers\Win7\x64″
Copy the two files here. Accept any warning which shows by hitting ‘Replace’
Now we have to disable the default Driver Signing enforcement which Microsoft has inbuilt into Windows 8 and 8.1. To do so You have to do the following
Press Windows Key + R (or go to Run)
Type “shutdown.exe /r /o /f /t 00″
Go to Troubleshoot –> Advanced options –> Start Up Settings –> Restart
After a computer soft reboot, hit Option 7 (Disable driver signature enforcement)
Restart your PC
When the Windows starts, go to run, and type “devmgmt.msc” and hit enter.
[showmyads]
Go to Universal Serial busses at the end and double click “Intel USB 3.0 eXtensible controller”. Click on Drivers in the New window which opens.
You should see that the Drivers are provided by Microsoft.
Now click “Update Driver” and then select “Browse my computer for driver software”. Next choose “Let me pick from a list of device drivers on my computer” and select “Have Disk”.
In the Window that pops up titled “Install From Disk” choose “Browse” and navigate to the location where we replace the original inf’s with the two modified .inf files. Select iusb3xhc.inf and click ok.
Ignore all warnings and install the drivers.
After installing, Reboot the computer with the same procedure as Step 6 & 7.
On opening the device manager, you should see an Unknown device. If you already had one before, you need to cross-check every unknown device to find the one we need.
Double click each such device and go to the 3rd tab “Details”. Find the Value “VID_8086″
After finding the correct device, choose “Update Driver” then click “Browse my computer”, Windows will ask you to identify the type of device, scroll down and select “Universal Serial Bus Devices”.
Click next, choose “Have Disk”, “Browse” and select the modified iusb3hub.inf that we placed in the same folder earlier. Ignore all warnings and install the drivers.
[showmyads]
Restart the computer normally and look at the driver tab for the “Intel(R) USB 3.0 eXtensible Host Controller” and the “Intel(R) USB 3.0 Root Hub” to confirm that you are now running the Intel drivers instead of the Microsoft ones.
You are now done. Try checking to see if the fastboot drivers works for you or not!
Happy Flashing!
Copied from
Click to expand...
Click to collapse
I wanted to personaly thank you for this method. I use windows 8.1 and have an intel 7 series chipset. 2 weeks ago, suddenly all my usb ports stopped working. I checked device manager, and universal serial bus controller only gave 3 chipset controllers. Also there were 3 other devices: unknown devices. When i checked the details, it were the USB root hubs of 2x 2.0 ports and 1x 3.0 ports. I tried everything until I came to this forum and tried you method for the 3.0 ports and it worked. Now i have access to 2 of my 4 usb ports. I am still not able to use my 2.0 ports. The usb hubs of these ports are not recognised and still under unknown device. Any suggestions on how to get these ports working?
Thanx in advance.

U
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wintel W8 Pro Z8300 Mini Pc
I am not responsible for any damage to your device when you are not sure leave the default Settings.
All Tested and 100% Working.
Thread Updated 18/11/2017
CloneZilla Backup+Restore With Free Tool.
2. Create a Windows Boot Usb Flash Drive.
3. Backup and Restore Drivers And (Missing Drivers)
4. Intel Graphics installer + Extra Settings
5. Install Linux Os.
6. Acronis True Image Backup+Restore With Non Free Tool.
----------------------------------------------------------------
**CloneZilla** Backup and Restore (Free Tool)
You need CloneZilla USB Flash Drive And External Drive
Download CloneZilla:
(Select amd64 and .ISO)
Link: http://clonezilla.org/downloads.php
Create a boot Usb-Drive Go to (2)
(Instructions official site )
Tip: Folder name of the created backup is example: (2016-05-09-13.img)
http://clonezilla.org/show-live-doc-content.php?topic=clonezilla-live/doc/03_Disk_to_disk_clone
Clear explanation
http://www.tuxradar.com/content/how-clone-hard-drives-clonezilla
Windows OS
2.
**YUMI** Created a working Windows 10 OS Fat 32 boot usb Flash Drive
Important: Only Install Windows 64 Bit OS
**Disable Secure Boot in Bios**
1. Create Multi Boot Usb Flash Drives
(Run as Administrator)
Upload The Windows_10.ISO (64bit) File in Program select target usb Flash drive and select for windows 10 installer.
After Done Eject
Create Also A Boot CloneZilla Usb Flash Drive.
Boot Windows and Clonezilla On Wintel W8 Pro
plug The CloneZilla Usb Flash Drive in Wintel Pro.
Go to Bios = Power Button Device and then Esc Button on Keyboard
in the Bios of Wintel Pro select / Boot manager/ the Usb Flash Drive
start By Enter.
CloneZilla Backup And Restore procces
folow The Instructions from (1.)
http://www.pendrivelinux.com/yumi-multiboot-usb-creator
http://www.pendrivelinux.com/yumi-multiboot-usb-creator/
Before INSTALL CLEAN WINDOWS
(BACKUP FIRST YOUR DEVICE WHIT CLONEZILlA)
3.
Double Driver Tool:
Clean Windows 10 install and missing drivers ?
(15/05/16 00:41 Updated (NetWork+Audio)
Note: After Restore audio driver: You May Need to Unplug and plug back in The External Audio Jack.
Backup
MediaFire
https://www.mediafire.com/folder/jgvqlaf00x2qd/Wintel
(Recommended Disable Antivirus)
1. Extract 2x Downloaded .rar File
2. Run double driver.exe Run as Administrator
3. Navigate to the backup folder
4. Restore what you Need
(If Need Instructions and info )
http://pureinfotech.com/double-drivers-how-to-backup-and-restore-drivers-in-windows/
Backup your personal driver before changing anything
4.
Extra Settings:
Intel? HD Graphics Version 10.18.15.4256:
https://downloadcenter.intel.com/download/25150
dated : 17/07/2015
Smoother system speed:
1. Right click
2. Click Search
3. type Performance and open Adjust the appearance
2. Disable all and Apply/Ok
Fast Booting Speed.
(**Disable Secure Boot in Bios**)
1. Run msconfig
2. Select Boot
3. Boot time valu = 3
4. Advanced options number of processors 4 + memory 2048
Disable Startup High Label Software Example (Office)
Extra option:
Disable Fast Booting Option in (Power Settings)
1.Choose what power button do.
2.change settings that are Currently unavailable.
3. Disable Turn on Fast Startup.
(Tested With all My installed Software)
Shutdown= (25 sec blue light Off)
Startup= (1 min 04 to 06 sec)
Rebooting time= (1 min 23 sec)
Note: you can still boost the windows with avg tune up (Turbo Mode)
Increase Wifi speed:
Step 1.
1. Select Settings
2. Select Update
3. Advanced Options
4. Shoose How Updates are Delivered
5. Disable the on and off swith
Step 2.
1. Right click on start menu
2 Run gpedit.msc ( if error go to 1 Below)
3. Administrative Templates
4. Network
5. Qos Packet Scheduler
6. Limit reservable bandwith
7. Enable
8. Enter Valu 0 Apply and OK
-----------------------------------------
1. Download gpedit.msc and install
2. Go to
C:/Windows/SysWOW64
3. Search gpedit and
Run As Administrator
4. Go to step 2- 3
Download: https://www.dropbox.com/sh/yeox57kv5wehre2/AABThEyXpFwHSBzdim7JT2e8a?dl=0
Speedtest.net
Second Test Downl= 29.05mb Upload = 3.02mb
On My Basic Network
CoreTemp:
(Protection)
Keep update your Cpu Temp in Taskbar and Set The Degrees Celsius you like for protection auto shutdown
Wintel W8 Pro Have Default Protection on 90 ?C its the max voor this type off intel (but its to hot)
Link: http://www.alcpu.com/CoreTemp/
Free VLC Smooth Default Video Player
http://www.videolan.org/vlc/download-windows.html
Free MSN Weather for your Android Phone (Same Source As Windows 10 Wheather)
https://play.google.com/store/apps/details?id=com.microsoft.amp.apps.bingweather
Intel Info:
http://www.intel.com/content/dam/ww...efs/atom-x5-processor-z8300-product-brief.pdf
Good To Know (save money)
CMOS Battery.
https://youtu.be/5DdAZrTZjEM
Most Populaire v3 CR2032 Battery
CR- lithium battery
20 - 20mm diameter
32- Thickness 32* 0.1 mm
Easy to find on Ebay
Note: i'm not 100% sure of factory built battery !
But should normally work.
6. Linux OS
Ubuntu 16.04.3 LTS 64Bit
(With Linux 4.10 kernel)
http://releases.ubuntu.com/16.04/
important
If You Installing from Terminal or Update Ubuntu,
Always Backup First Your Ubuntu + data , in case something goes wrong.
Currently Version is 16.04.3 LTS (With Linux 4.10 kernel)
Easy Update from command in Terminal see dropbox folder/File link:
https://www.dropbox.com/sh/tb2m0tz62c61ogd/AACtr1iuGfyGx_WM6pMj-tvta?dl=0
Also OSX Theme in Folder
1. install with Terminal
Mac OS X Lion v7 Theme ''Folder''
Extra Software Updated Folder 14.06.2017
https://www.dropbox.com/sh/xk8h30xdho6t8ev/AACG2N4ovoMMysVRp4FmXNk1a?dl=0
Ebay:
Cheap Sound And Wifi Solution
Wifi usb Stick :
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/272898699092
Cheap 100% Working Audio on ubuntu :
Note: Sound is Ok but Poor Quality and unstable
http://www.ebay.co.uk/itm/252631182595
Pluganble sound card stick :
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/182387818160
Note: ( Tested ) Quality Is Very Good !!
6.
Backup Partition With **Acronis True Image** (Easy Non Free Tool)
(Example Screenshot Below)
Website: http://www.acronis.com/en-us/
1. install and burn Acronis.iso with **Unetboot** dont need to select a distribut Burn the iso to Usb Stick
2. Boot in to your bios. with (Esc Button Keyboard)
3. Select Boot menu on Bios Wintel W8 Pro
4. Select your usb drive and enter
5. in Acronis menu enter number 1
6. Select Backup and select all in local linux partition disk
7. Select the destination External Disk, create a folder and name it and start procces.
Time: depends on the writing speed of The Taget Drive.
Acronis backup is Compressed in 1 Bin File. is undoubtedly the best Backup/Restore Tool works with all devices !
Note: If the Backup folder/File you made is Locked on Ubuntu you need Root Acces with Root manager if you want to move or delete the folder.
(Don't worry you need to do this only 1 Time if Need)
In Ubuntu Enter in Terminal:
sudo nautilus
And use the Root Manager.

Hello
When I turn on the graphics driver the pc reboot with a blue screen.
When I disable the driver I have no blue screen but I can not decode 1080p and the sound via HDMI does not work.
ideas ?

balby said:
Hello
When I turn on the graphics driver the pc reboot with a blue screen.
When I disable the driver I have no blue screen but I can not decode 1080p and the sound via HDMI does not work.
ideas ?
(This backup i made is for after a Clean Windows install and missing driver)
All Wintel pro Z8300 Have the same Default drivers
First formated the internal storage (recommended)
Then Install Windows 10 Version ....
by the first Boot you only wil need the sound driver Frome My (Double Driver Backup), and after you done this ,Backup your Windows (CloneZlilla) and
Then update Windows.
For a working Screen you only need to use .exe installer.
Intel Driver Grapich
https://www.dropbox.com/sh/ykj10iqywakgpjs/AADv7-Jm-AOchoNFRFz66Z8Va?dl=0
Click to expand...
Click to collapse

balby said:
Hello
When I turn on the graphics driver the pc reboot with a blue screen.
When I disable the driver I have no blue screen but I can not decode 1080p and the sound via HDMI does not work.
ideas ?
Click to expand...
Click to collapse
tried something ?
If you waint my help !

Hello
i have downgrade the driver and everything works perfectly.
Thanks

​
balby said:
Hello
i have downgrade the driver and everything works perfectly.
Thanks
Click to expand...
Click to collapse
Okido Nice to Know !

I used "INTEL(HD) driver update utility 2.5"

balby said:
I used "INTEL(HD) driver update utility 2.5"
Click to expand...
Click to collapse
Right win64_154001

hey I didnt have USB on boot menu even if i have usb boot enable, what can i do?

Hi, after a clean installation of win 10, the blue led is not working, is turned off when the Wintel Pro is turned on.
There is a solution?
Thank you and sorry for my bad english.

niro88 said:
hey I didnt have USB on boot menu even if i have usb boot enable, what can i do?
Click to expand...
Click to collapse
**Disable secure boot in Bios**
The Windows 10 boot USB will automatically appear in the boot manager
(Power on hold esc on keyboard and select boot manager select usb drive)
Option 2
try another USB stick
Option 3
Read carefully

Giacomofal said:
Hi, after a clean installation of win 10, the blue led is not working, is turned off when the Wintel Pro is turned on.
There is a solution?
Thank you and sorry for my bad english.
Click to expand...
Click to collapse
have you only installed a Windows 10 /64-bit ?
Try:
-Disconnect The Adapter From the device
If Not working
- Make sure you have WiFi or WLAN
- Reset windows from settings menu
( takes a long time but it will install all drivers available also updates )
Inportant:
1. Alway backup your device before you do anything else
(Rules Not only for the phones )

Wintel W8 Pro Z8300
Hello , I bought the computer and I have tried to change the screen size it shuts down and now it just turns on and off without stopping what can you do ?

77777777777777 said:
have you only installed a Windows 10 /64-bit ?
Try:
-Disconnect The Adapter From the device
If Not working
- Make sure you have WiFi or WLAN
- Reset windows from settings menu
( takes a long time but it will install all drivers available also updates )
Inportant:
1. Alway backup your device before you do anything else
(Rules Not only for the phones )
Click to expand...
Click to collapse
Yes i have win 10 64 bit only, The problem appeared after a clean installation of Windows 10, because the reset from setting menu was blocked. I do not have a backup of the original system.
In your opinion is a driver problem? Because the red led works perfectly.
Thank you.

boot from usb
How did you manage to boot from USB stick to install a fresh Windows?

Same problem here.
Disabled secure boot and tried different usb sticks in 2 usb ports. Boot Manager bios menu does not allow to select an usb external device.

parallaxx said:
Same problem here.
Disabled secure boot and tried different usb sticks in 2 usb ports. Boot Manager bios menu does not allow to select an usb external device.
Click to expand...
Click to collapse
Follow the thread:
Use YUMi and the Right steps
1. Select Usb F drive
2. Win10 ISO File (64Bit)
3. Select windows 10 installer !!
Tested with 4,8,16 gb USB Flash drive 100% Working
If not then you need to use a different USB Flash drive
success !

[email protected] said:
Follow the thread:
Use YUMi and the Right steps
1. Select Usb F drive
2. Win10 ISO File (64Bit)
3. Select windows 10 installer !!
Tested with 4,8,16 gb USB Flash drive 100% Working
If not then you need to use a different USB Flash drive
success !
Click to expand...
Click to collapse
And First Disable Secure Boot !

77777777777777 said:
**Disable secure boot in Bios**
The Windows 10 boot USB will automatically appear in the boot manager
(Power on hold esc on keyboard and select boot manager select usb drive)
Option 2
try another USB stick
Option 3
Read carefully
Click to expand...
Click to collapse
It worked with an usb2 stick plugged into USB port 1.
thanks

Re-Up for drivers, please?
Audio & Wifi drivers are down, can you please re-up? thanks:good:

For Ze500CL only! If you got No Fastboot, No recovery, No Display, hard bricked your device.You must perform sequential steps indicated below, process will include many small steps. Plz make sure to perform all steps in same sequence and same manner as prescribed. Remove all drivers related to mobile you have installed earlier.
Step 1: Install the driver and connect mode IntelSocUSB IntelSoc:
This Is the driver which help a computer connecte to your Zen2 IntelSoc mode. To install these driver you need to perform special steps if you are using windows 8 / 8.1, 10 . you need to disable driver signature enforcement before installing drivers. below i have mentioned steps needed to install driver for various versions of windows. but first download the needed driver from link given below.
https://drive.google.com/open?id=0B72QQTXqZSRwR0JGeFI2U3FUZ2c
Step 1.1 - how to install these drivers:
If you're using Windows 7:
Right-click the file - iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"
After This step, the driver installation is finished, continue to section 1.2 for connecting IntelSoc.
If you're using Windows 8 / 8.1 :
On Keyboard press Windows + I to show charm bar in the right corner,
click on the option setting. Choose "Change PC Settings" to enter the PC Settings.
Choose the General tab and navigate to Advanced Startup section, continue click Restart now.
This will reboot windows and allows you access to the advanced mode, now select the following options: Troubleshoot - -Startup Settings Advanced Options and then click the Restart button to restart the computer.
now you will see screen with various options numbered from 1. Find disable driver signature enforcement. And press the appropriate number on keyboard your pc will reboot
Now Right-click the file - iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"
After This step, the driver installation is finished, continue to section 1.2
If you're using Windows 10 :
On Keyboard press Windows + I or click Start, select Settings.
In The Settings window, select the Update & security.
Continue Choose recovery and click "Restart now".
When The computer has access to the Advanced screen you will see screen with various options numbered from 1. Find disable driver signature enforcement. And press the appropriate number on keyboard your pc will reboot
Now Right-click the file - iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"
After This step, the driver installation is finished, continue to section 1.2
1.2 Connect Zenfone with computer IntelSoc Mode:
Now you must complete this step before installing xfstk downloader. it helps to setup device's connection to PC
on your pc open device manager and find Intel Soc.
Click to expand it. You will see a single option under here.
Connect your phone to computer via USB cable,
now back to the phone, hold power button for 10 seconds to shutdown completely, then press simultaneously the key "power" + "volume down", until phone vibrates. Or computer makes detection sound, wait a few seconds. it will add an item immediately below intelSoC in device manager “MOOREFIELD” new devices is connected successful.
Now Download intel android USB Driver and install normally from link below:
https://drive.google.com/open?id=0B72QQTXqZSRwSU5CdDNuUElEcUE
1.3 Installing xfstk-downloader:
installation of xFSTK is very simple. download xFSTK setup from the link below. to install. right click the setup file and run as Administrator. click next next simply until you finish the download process
Here is the download link:
https://drive.google.com/open?id=0B72QQTXqZSRweDdfMjlPOGEyTW8
Now to Unbrick Process.
Using xFSTK to unbrick the Device:
Required Files:
https://drive.google.com/open?id=0B72QQTXqZSRwRTRCMlJJcVB2a2M
After downloading the necessary files extract it. It will contain 5 files which will be used to bring your phone back to life.
Now Run xFSTK as Administrator. Now click “CLVP A0 / B0 / B1” last option bottom right hand.
Then Go to Options to change the value of gp flag. Tick GP value over ride, in the Value Section change value to 0x80000245. Now tick Include softfuse file. And select the file Named “signed_CLVP_CSAP_SoftFuseFile_PF450CL” from extracted files. Change the detection timeout value to 180. And click okay.
Now select Firmware files FW DnX: and IFWI: by clicking small three dots:- CLVp_CSAP_FWR_DnX_20.3E.bin and IFWI_v91.15_CSAP_MFG.bin from extracted
Now select operating system: OS DnX - CLVp_CSAP_OS_DnX_20.3E.bin, OS image - droidboot.img.POS_sign.bin from extracted files.
Now see the Device Status section below, this section shows the number of connected target (devices) , you need at least one device is connected., if not try hold power button for 10 seconds to make sure it power downs completely. then hold the volume down button and click power button. wait till device vibrate or computer makes detection sound. leave power button but keep holding the volume button for few seconds.
As you see connected target. Click begin download to start implementation. You may get error multiple time. But repeat the process again and again. Untill you see FW+OS download complete.
After that you may seea 4 color, just like some TV stations stop broadcasting on TV. You have to wait a little. after few seconds or minutes device will boot into bootloader. If not repeat the xFSTK process again.
Flash Raw Firmware Using Asus Flash Tool:
Required Files:
Asus Flash Tool: https://drive.google.com/open?id=0B72QQTXqZSRwUDZqa0M4SWRObVE
Raw Firmware File: https://yadi.sk/d/LNzLj8mMyytyL
Download Asus Flash Tool and install. Run asus flash tool as administrator. And select the phone model. Then select the downloaded raw file and click start button to flash.
Note: sometimes flash process may go endless. If this happens remove the usb from computer. Kill asus flashtool process from task manager. Now run tool again and flash.

Hi dude, thank you very much for your guide and your help but I still have some problems that I cant resolve.
Firstly in order to make my phone detected by my pc i need to powercycling it pressing "Power + vol up" and not down as you mentioned. I followed any step of your guide but every time I click begin download the bar under the usb logo on my phone it became red and the download did not complete and abort it self. Did you know how to solve this issue ?

waltermaffy said:
Hi dude, thank you very much for your guide and your help but I still have some problems that I cant resolve.
Firstly in order to make my phone detected by my pc i need to powercycling it pressing "Power + vol up" and not down as you mentioned. I followed any step of your guide but every time I click begin download the bar under the usb logo on my phone it became red and the download did not complete and abort it self. Did you know how to solve this issue ?
Click to expand...
Click to collapse
as i mentioned in my guide. very first of all remove all kind of mobile related drivers and xfstk tood if you already installed. it is very important to install soc driver before installing xFSTK. moreover before installing xFSTK and after installing isoc driver you need to power cycle and connect your device to pc. and use volume down button. change the right flag value. and when using xfstk. load files. click begin download. when it start waiting for device then power cycle it. it will itself force into download.

if i bricked my phone but i can enter fastboot mode can i recover it using the asus flashtool?

fabi.m said:
if i bricked my phone but i can enter fastboot mode can i recover it using the asus flashtool?
Click to expand...
Click to collapse
yes definitely you can do it.. download raw firmware and sew it.. if asus flash tool fails. do tell me. i will try to write manual commands to flash.

sukhwant717 said:
yes definitely you can do it.. download raw firmware and sew it.. if asus flash tool fails. do tell me. i will try to write manual commands to flash.
Click to expand...
Click to collapse
alright, thank you so much. im downloading right now, i'll let you know either way!

Thank you so much! worked perfectly

so after flashing raw fw and booting up it suddenly is carrier locked and is askig for a "SIM network unlock pin" i tried flashing a different ROM and the problem persists.. any suggestions? My device was unlocked previous to this..

fabi.m said:
so after flashing raw fw and booting up it suddenly is carrier locked and is askig for a "SIM network unlock pin" i tried flashing a different ROM and the problem persists.. any suggestions? My device was unlocked previous to this..
Click to expand...
Click to collapse
don't use wrong code. you will lock permanently. i will give you unlock code soon

sukhwant717 said:
don't use wrong code. you will lock permanently. i will give you unlock code soon
Click to expand...
Click to collapse
thank you! i now have my phone unlocked thanks to the code you sent me

help me, my cloverviewplus driver was not installed, any solutions?

xJri17 said:
help me, my cloverviewplus driver was not installed, any solutions?
Click to expand...
Click to collapse
which operating system you are using?

sukhwant717 said:
which operating system you are using?
Click to expand...
Click to collapse
windows 7 32bit

xJri17 said:
windows 7 32bit
Click to expand...
Click to collapse
need to install driver before xFSTK. soc device must be recycled to install driver correctly.

xFSTK. will not open for me. I followed all the steps and I run xFSTK. as Administrator. It asks me if I want to allow it to run. I click Yes, but nothing happens. When I look in Task Manager it is not there?>
My OS is Windows 10.
Any ideas?

sukhwant717 said:
need to install driver before xFSTK. soc device must be recycled to install driver correctly.
Click to expand...
Click to collapse
how to recycling my device?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can't detect my device
Sent from my HTC One M9 using XDA-Developers Legacy app

[/IMG]
Sent from my HTC One M9 using XDA-Developers Legacy app

i have the red bar under usb icon as well.

---------- Post added at 10:42 PM ---------- Previous post was at 10:40 PM ----------
[/COLOR]help help

[GUIDE/TUTORIAL/HOWTO] HTC One M8 from Stock to Android 12.1 / LineageOS 19.1
[GUIDE/TUTORIAL/HOWTO] HTC One M8 any version (single SIM: m8ul, m8vzw and m8spr or dual SIM: m8dug and m8dwg) stock to Android 12.1 / LineageOS 19.1
This detailed step-by-step guide helps you transform your HTC One M8 (any version) to a powerful one with Android 12.
Make sure you have the One M8 model, in Android, go to Settings > About phone and check the model.
CHANGELOG
v6. Moved to Android 12
v5. Moved to Android 11, improve readability, update pack
v4. Prepare for Android 11, Updated pack with latest TWRP
v3. Updated pack with latest Magisk
v2.1. Drop ADB 15 sec installer and use latest adb and fastboot.
v2. Update pack and tutorial for TWRP 3.4.0-1
v1. Initial release
1) DOWNLOAD
- djibe HTC One M8 pack (~40 Mo) : https://bit.ly/djibe-onem8-pack
(includes HTC USB Drivers, recovery TWRP 3.6.1_9-0 for all m8, Magisk Root, adb & fastboot.exe).
Unzip the djibe folder from the zip on root folder of C:\ drive.
- ROM Unofficial LineageOS 19.1: https://forum.xda-developers.com/t/rom-12l-unofficial-m8-m8d-lineageos-19-1-stable.4464733/
Download latest build here (compatible with all M8 signel/double SIMs variants): https://www.androidfilehost.com/?w=files&flid=334966&sort_by=date&sort_dir=DESC
# M8 GPe partition layout is no longer supported. The device must first be converted to Sense firmware, otherwise installation will fail.
# Android 13 is incoming
+ MindTheGApps ARM 12.1: https://androidfilehost.com/?w=files&flid=322935&sort_by=date&sort_dir=DESC
+ Charge phone to 100%
+ MicroSD card formatted in FAT32
+ Copy ROM + Google Apps + both Magisk files on microSD card. Insert it in phone.
WARNING. This tutorial uses Microsoft Windows.
WARNING. Warranty is now void.
WARNING. Read carefully the sentences starting with ###.
2) BACKUP DATA AND INSTALL DRIVERS
Disable Antivirus.
Install drivers from my pack:
right click on HTCDriver.exe > click on Run as administrator and continue the setup.
Connect HTC One (while phone on) to PC, let drivers install.
In Windows explorer, HTC One should be available.
### If not make sure phone connection is in File transfer mode (see Android notifications).
### Phone is still not visible in Windows Explorer ? See fix at end of tutorial.
Collect all personal photos, videos, etc ... and backup these on PC.
Use an app like Backupyourmobile/SMS Backup & Resotre to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Disconnect phone.
Check that you have the latest official updates.
### If your phone is Simlocked/carrier locked/Network locked, don't go further.
Visit official website of your network carrier (or call their support) to retrieve your desimlock code.
Ask them for details on how to remove simlock.
How do I know my phone is simlocked ? When you insert a SIM card from another operator, network is inaccessible.
Only a stock ROM can remove simlock.
To go back from custom ROM to stock, see dedicated section at the end of tutorial.
3) UNLOCK BOOTLOADER
In Android, go to Settings > About > Software information > More.
Tap 7 times on Build number. It unlocks Developer options.
Go back to the About menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Toggle on the USB debugging option.
Connect phone, a message appears on phone : Allow USB debugging?
check Always allow and confirm by tapping on OK.
Now, open a Windows command on my "flash" folder (hold Shift + right click on folder -> Open a windows command here).
### Then navigate to my flash folder (if it is on desktop) with this command :
Code:
cd /d C:\djibe\flash
Enter command :
Code:
adb devices
, confirm by pressing Enter.
Command returns :
Code:
List of devices attached
HT35****** device
### If no device is found, uninstall and reinstall properly the drivers while antivirus is off. Or see fix at the end of this tuto.
### Or start fresh on another PC.
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type:
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Type:
Code:
fastboot getvar all
Bootloader must be in version 3.19 (Thx @sterphles)
Type:
Code:
fastboot oem get_identifier_token
, confirm by pressing Enter.
Command returns multiple lines.
Select with your mouse all the lines from
Code:
<<<< Identifier Token Start >>>>
(included)
to the line
Code:
<<<<< Identifier token end >>>>>
(included).
Now on keyboard copy (Ctrl + C combo), then open Notepad.
In Notepad, paste those lines (Ctrl + V combo).
Now manually remove all the (bootloader) strings from each line.
Your notepad should now look like this :
<<<< Identifier Token Start >>>>
37A5DBF4FE5F0D9F4425E54AA91AFDBF
2A20E9C67C3BB4FAE60263F76BDEC6AC
847BF9FFB11DAEA4AB88AC8710435449
9BC12E93DF4C54FFE3D064C4C810C49A
2CDAF2E0CD3A164FED4A568CB0FD2AC6
C01AA991733D949C00987062D691DE91
8AA1C97CEBC3ACE83FECE75A1D03CE72
62414C7DC36A73AFCBF433E1EBE2EDC7
E272F73309632D3EF8C86E472B65E8EF
37E46B52FE3F94FC69D1854CA3DE6F48
C3E10001B233A70B1EAF35134F51FCC6
353E0CC98534E6E60A241A7063D0BE2F
A5B752E75C1C47E6F739BDBE67D024DA
3292A14278247557632639802722A86C
E61424F7666AE085AA9905096FEED1AD
5ECBBD867544E95ABDDA277690B8CB55
<<<<< Identifier Token End >>>>>
Now visit this website : https://www.htcdev.com/bootloader/
Register on the site. Confirm registration with your email.
In the select menu, chose HTC One (M8), click Begin unlock Bootloader button.
Agree to legal terms.
Next page, go to the bottom and click continue to step 5.
In the bottom of this page, in the lower textarea "My Device Identifier Token",
copy and paste the multiple lines you just edited (my example is just above).
Click Submit.
HTC tells you : Token Submitted Successfully.
Open your mailbox (associated to your HTC account).
Copy the Unlock_code.bin file attached to email in my "flash" folder you unzipped.
In Windows command, type :
Code:
fastboot flash unlocktoken Unlock_code.bin
, confirm with Enter.
Command should return :
Code:
unlock token check successfully
Back to phone, press Volume+ to select "Yes, unlock bootloader", then Power button to confirm flash.
Now wait while phone is going to Factory reset.
Don't let Android restart by holding both Power + Volume- to enter bootloader immediately.
FASTBOOT menu is overlined in red.
4) FLASH TWRP RECOVERY
Using the same Windows command prompt, enter :
Code:
fastboot devices
to make sure phone is still available.
Then
Code:
fastboot flash recovery twrp-3.6.1_9-0-m8.img
Command returns :
Code:
finished. total time: x.xxxxs
Now on phone, press Volume- to highlight HBOOT, confirm with Power button.
You are back to the booloader screen (UNLOCKED is written on top line), press Volume- to navigate to RECOVERY, and confirm with Power button.
Phone reboots in TWRP recovery.
5) BACKUP STOCK SYSTEM
In TWRP, check Never show this screen and Swipe to Allow Modifications.
You land on TWRP Home screen.
Always make a backup of your stock system. We never know when a weird bug will decapitate the system.
Go to Backup menu, select all partitions and Backup to microSD card.
Backup the generated TWRP folder content from your microSD card to PC.
6) WIPE PARTITIONS
Back to Home menu, go to Wipe > Advanced wipe.
Select Dalvik / ART Cache, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to Wipe menu.
### Don't wipe SDcard
7) FLASH ROM, ROOT/MAGISK AND GAPPS
Back to Home screen, tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active)
then Add more Zips -> Magisk*.zip,
then Add more Zips -> mindthegapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end (can be long).
When completed successfully, tap on Reboot.
Tap on Do not install when TWRP asks for the app install.
Wait during long first boot.
Setup Android.
8) You can use Backupyourmobile to restore data,
use GPS Status & Toolbox app to enhance GPS fix.
That's it.
Enjoy,
djibe
THANKS to TWRP team, LineageOS team, tarkzim, ckpv5, alray, , Flyhalf205, icxj1, R1ghtC, gimmeitorilltell, All M8 contributors.
##################################################
A) Fastboot devices doesn't show any device connected
Install HTC USB drivers
Reboot PC
Open Windows Device Manager (Windows + R shortcut on keyboard > devmgmt.msc > hit Enter)
Search for phone at Other devices submenu > Device is named Android 1.0 or My_HTC
### If it is My_HTC > select it > right click > Uninstall. Disconnect phone. Reconnect phone. Now recognised as Android 1.0.
Select device Android 1.0 > right click > Update Driver
Search locally for driver > Show a list
Select ASUS Android Device.
Manufacturer: select Google, Inc. and set driver to Android Bootloader Interface
Confirm install.
B) Go back to stock from a custom ROM with a HTC One M8
- Either restore your TWRP backup with TWRP recovery
- Or restore a community TWRP backup with TWRP recovery (https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860 see posts 2 & 3)
### With S-ON and keep device Unlocked
To find suitable backup for device, boot phone in Bootloader mode (Power + Volume-)
Look at your hboot version (hboot 3.19.0000 is most frequent)
Launch a fastboot command:
Code:
fastboot getvar all
Make sure IMEI is a valid number.
Look at your CID and MID values. Try to find exact same TWRP backups for your phone.
### Flash only exact model versions.
Then wipe all partitions and restore the correct TWRP backup an angel made for you.
- If TWRP restore fails, start with these posts :
You will need a Rom Update Utility (RUU) for your exact model version.
This is compatible with S-ON, will need to relock your Bootloader (save your Unlock_code.bin +++) and need original recovery
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
C) No IMEI visible and no cellphone network detected with HTC One M8
Composing *#06# shows an empty IMEI dialog window.
or Settings > About phone > IMEI. IMEI: Unknown, IMEI SV: Unknown
Refer to B) tutorial to get back to stock.

Tuto updated for latest TWRP recovery

Please remove the 15 second adb. The OP of adb 15 second states in his post that it's outdated and should not be used.

Never_Sm1le said:
Please remove the 15 second adb. The OP of adb 15 second states in his post that it's outdated and should not be used.
Click to expand...
Click to collapse
Very nice !
Thx, pack and tutorial updated.

Can I use this guide for my m8wl?
And if it's possible, which of the two builds should I download?

Alexcxvtr said:
Can I use this guide for my m8wl?
And if it's possible, which of the two builds should I download?
Click to expand...
Click to collapse
Hi, look at this first: http://droider.eu/2014/09/20/htc-one-m8-models/
Then pick the correct ROM.

Thank you .I did it by following your guide.

murphylim said:
Thank you .I did it by following your guide.
Click to expand...
Click to collapse
Thanks, it is always encouraging to have support.
Still a good phone

Hi, I updated pack with latest Magisk root version and checked download links.

For Windows 10 users, use HTC drivers version v4.17.0.001 - Download them from here - Zippyshare.com - HTC Mobile Driver v4.17.0.001.exe
Everything else works just fine. @djibe89 thank you.

hymnz said:
For Windows 10 users, use HTC drivers version v4.17.0.001 - Download them from here - Zippyshare.com - HTC Mobile Driver v4.17.0.001.exe
Everything else works just fine. @djibe89 thank you.
Click to expand...
Click to collapse
Hi, thanks for feedback.
Drivers 4.2.0.001 didn't work ?

djibe89 said:
Hi, thanks for feedback.
Drivers 4.2.0.001 didn't work ?
Click to expand...
Click to collapse
No. Not on Windows 10.

djibe89 said:
Now type :
Code:
adb reboot bootloader
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type :
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
### You may have to fix drivers again (see fix at the end of tuto)
Click to expand...
Click to collapse
Hi,
I'm at the stage of trying to unlock the bootloader. The phone restarts in fastboot mode but when i type in fastboot devices nothing happens.
and then if i skip that and type get_identifier_token. the return is waiting for any devices. and nothing happens.
What have I missed?
Thanks
i've since been able to get past this stage. I used htc driver 4.17. I'm now stuck on the token. cmd prompt keeps saying cannot load the file no such file or directory. but i'm so sure i have the file in the right folder

juggled_balls said:
Hi,
I'm at the stage of trying to unlock the bootloader. The phone restarts in fastboot mode but when i type in fastboot devices nothing happens.
and then if i skip that and type get_identifier_token. the return is waiting for any devices. and nothing happens.
What have I missed?
Thanks
i've since been able to get past this stage. I used htc driver 4.17. I'm now stuck on the token. cmd prompt keeps saying cannot load the file no such file or directory. but i'm so sure i have the file in the right folder
Click to expand...
Click to collapse
Hi, when
Code:
fastboot devices
doesn't return anything, it means there is an USB driver problem.
You'll have to try to fix from Windows Device Manager.

hymnz said:
No. Not on Windows 10.
Click to expand...
Click to collapse
Hi, the Driver installer from my pack (HTCDriver_4.2.0.001) sends an error during install, but then drivers finally install.

djibe89 said:
Hi, when
Code:
fastboot devices
doesn't return anything, it means there is an USB driver problem.
You'll have to try to fix from Windows Device Manager.
Click to expand...
Click to collapse
Thanks for your work. I managed to plod my way through everything and get it working. Very happy the old phone can keep going on.

juggled_balls said:
Thanks for your work. I managed to plod my way through everything and get it working. Very happy the old phone can keep going on.
Click to expand...
Click to collapse
Awesome !
Enjoy

Hi, tutorial and pack updated for Android 11

thx for the guide!

seamonkey420 said:
thx for the guide!
Click to expand...
Click to collapse
Hi, glad you liked it !
Enjoy your phone