Owners of the factory-unlocked, dual SIM Snapdragon variant labelled as 'a5_dug' in the bootloader mode, will be pleased to know that the update is now available from your stock Lollipop ROM.
Before you begin
Preparation
If you are not using the official update tool, and wish to use OTA files uploaded here, reboot your phone in to its bootloader, and ensure that a5_dug is displayed. This update may not apply to other models, regardless of whether they are dual SIM or not. It most certainly will not apply to the 816G model which uses a MediaTek chipset.
You must ensure that you have 2GB free on the internal eMMC storage before continuing if you wish to update using the stock update tool. The update tool does not download to the microSD card.
The update does not update, unfortunately, the HTC Sense user interface. It uses the same Sense version as Lollipop did, with some minor changes.
Update contents, simplified
Android 6.0.0
HTC Sense 6.0
Additional Google features
Installation
For phones running a stock ROM earlier than Lollipop 5.0.2
Please update your phone to 5.0.2 and proceed to follow the instructions below if you wish to update through the official update tool.
For phones running stock Lollipop 5.0.2
The update is in two parts for phones running stock Lollipop 5.0.2. The first part is less than 60MB (typically), and prepares the phone for the installation of the second, main part, which is around 1.1GB.
Open the 'Settings' app.
Scroll down and select 'About'.
Tap 'System update'
Agree to download the update by pressing 'OK'.
Once downloaded, 'System update downloaded' appears in the notification tray.
Tap this, and tap 'Install'.
Then repeat for the second part.
For phones running custom software
(investigating)
I just got HTC Mail update only!!!
The update could be available around 01 - 02 week, hope so
@gwhite5 seriously!??? No Sense 7 ?!!!
Its great news but plz provide me with the marshmallow ROM for dual sim models with root capabilities! ? thanks in advance
Any news about the a5_dwg models ?
I have A5 Dug (816w).
After OTA update I have Android 6 with Sense 7, not Sense 6...
For devices on custom recovery
I am running official ROM but on custom recovery TWRP and rooted. My question is will this update will be installable on this setup?( Haven't tried yet)
Also I tried rolling back to stock recovery but I have removed few system app in past without backup is there any way to get the apks for them . I got error for HTC Car app . Also will need help on how to install it as a system app, cuz its not avaialble on "/system/priv-app/Automotive_Home/Automotive_Home.apk" .
Any help is appriciated.
TIA
I finally managed to reinstall the automotive_home.apk as system app, i moved back to stock recovery and then tried the OTA update once again still getting the same error " unexpected content" on that path.
could someone please make a twrp backup of the android 6 on the a5_dug ?
@mshtob its already done bro check updates we are still waiting for a5_dwg
pratik14994 said:
@mshtob its already done bro check updates we are still waiting for a5_dwg
Click to expand...
Click to collapse
No sorry I meant a twrp backup because I have twrp and cyanogen mod I was hoping someone could have a twrp backup of stock marshmallow rom so I can restore it
I have A5_DUG (CID: HTC__622 / Asia_HK) and I didn't get the update yet...
Is it because it's rooted with many changes? I didn't have this problem with the previous update so is it just not released yet for my CID?
EDIT: I noticed that version-main is blank in the bootloader
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
THE_MOJTABA said:
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
Click to expand...
Click to collapse
you can use this MM backup
http://forum.xda-developers.com/desire-816/general/twrp-backup-htc-desire-816-a5dug-dual-t3336060
Extract recovery from the OTA file.
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
THE_MOJTABA said:
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
Click to expand...
Click to collapse
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
need lolipop recovery guys
Tnx for your help
kyyubikiller said:
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
Click to expand...
Click to collapse
I used recovery from "firmware.zip" file but did'nt work..after setup and reastart, my phone stoped on whit screen whit htc logo...i dont now what can i do anymore.
---------- Post added at 02:11 AM ---------- Previous post was at 02:06 AM ----------
Roberto Nigel said:
you can use this MM backup
http://forum.xda-developers.com/desire-816/general/twrp-backup-htc-desire-816-a5dug-dual-t3336060
Click to expand...
Click to collapse
Tnx but this backup did'nt work too
THE_MOJTABA said:
I used recovery from "firmware.zip" file but did'nt work..after setup and reastart, my phone stoped on whit screen whit htc logo...i dont now what can i do anymore.
---------- Post added at 02:11 AM ---------- Previous post was at 02:06 AM ----------
Tnx but this backup did'nt work too
Click to expand...
Click to collapse
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Roberto Nigel said:
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Click to expand...
Click to collapse
yes im sure my phone is a5_dug.
when i want to extract this back up, i see an error in end of extract process (99%). but the files will be extract correctly,apparently
i copied files to sd card and done full wipe, i restore this back up..but the process was ok until 60%, but suddenly the process will be 100% and writes successful and done. but after restart my phone stop in white screen with htc logo!
i repair the .zip back up but it dose not change.
i think the .zip file is broken-down.. i downloaded it with download manager.
Roberto Nigel said:
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Click to expand...
Click to collapse
fixed.. tnx a lot
the downloaded file was destroyed.
Related
Hello!
So I've managed to get myself info a few technical difficulties. After wiping the entire phone (internal storage and system as well....), I installed the Viper ROM. After completing the install process without any problems, my phone boots directly to the bootloader menu every single time. I made sure that the firmware version was up to date before deleting the stock ROM (Reminder to next time: backup)
Bootloader screen info:
Software status: Modified
Unlocked
S-ON
I've tried with different ROM's (MaximusHD, Skydragon) with the same result every time. I can access both download and recovery mode. I installed SuperSu with the .zip file through TWRP, without luck. Wiping cache, factory reset and similar doesn't seem to do anything.
What do I do now? I bought the phone in Norway so my best guess is that I have the international model. All help is much appreciated
Anyong
Edit: This is the M9 and not M9+, could admin please move this thread to the right forum?
try this rom and post results
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
http://forum.xda-developers.com/one...c-one-m9-stock-backup-stock-recovery-t3190453
anyong! said:
Hello!
So I've managed to get myself info a few technical difficulties. After wiping the entire phone (internal storage and system as well....), I installed the Viper ROM. After completing the install process without any problems, my phone boots directly to the bootloader menu every single time. I made sure that the firmware version was up to date before deleting the stock ROM (Reminder to next time: backup)
Bootloader screen info:
Software status: Modified
Unlocked
S-ON
I've tried with different ROM's (MaximusHD, Skydragon) with the same result every time. I can access both download and recovery mode. I installed SuperSu with the .zip file through TWRP, without luck. Wiping cache, factory reset and similar doesn't seem to do anything.
What do I do now? I bought the phone in Norway so my best guess is that I have the international model. All help is much appreciated
Anyong
Edit: This is the M9 and not M9+, could admin please move this thread to the right forum?
Click to expand...
Click to collapse
Did you receive the OTA upgrade from HTC to install Marshmallow? Or did you try to upgrade it yourself?
If you're trying to install a Marshmallow custom Sense rom with an old firmware (2.x), then you will have to return to Lollipop and wait for official OTA as Marshmallow (Sense, not AOSP) needs your firmware to be upgraded. Or you can turn s-off and flash a 3.x firmware
elghandor said:
try this rom and post results
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
http://forum.xda-developers.com/one...c-one-m9-stock-backup-stock-recovery-t3190453
Click to expand...
Click to collapse
Thanks for responding. Downloaded this ROM:
"Europe Base 1.90.401.3 - CleanSlate 1.2.3
CleanSlate-europe-full-odexed-1.2.3.zip 1.97 GB"
Transfered to internal storage and flashed. Flashing process is done withing 5 seconds, but nothing happens. Attatched image of phone when finished.
Boots back into bootloader when rebooting the phone. Any suggestions?
gortys said:
Did you receive the OTA upgrade from HTC to install Marshmallow? Or did you try to upgrade it yourself?
If you're trying to install a Marshmallow custom Sense rom with an old firmware (2.x), then you will have to return to Lollipop and wait for official OTA as Marshmallow (Sense, not AOSP) needs your firmware to be upgraded. Or you can turn s-off and flash a 3.x firmware
Click to expand...
Click to collapse
To be honest, I'm not really sure. New to this game hehe. Any way to check this in TWRP? Thanks
http://consumer.huawei.com/my/support/downloads/detail/index.htm?id=75624
Huawei in the international edition of the official subcontract, tested MT7-L09, MT7-L10
B513 or B511 SD card falls back to 100% B500 version,
SD card upgrade any version 5.1.1 to fall back to 5.1
How to use this downgrade pack
1) Download this downgrade pack and made sure you have a usable micro sd card.
2) After the download is complete, kindly extract the file and copy the file "UPDATE.APP" into the micro sd card and placed it into a new folder named "dload" at the top level of the micro sd card
NOTE: Before proceed with the downgrade process, please ensure that you have perform any necessary backup in order to avoid any data loss.
3) Once you are ready to downgrade, launch the dialer and key in *#*#2846579#*#* and select option "4. Software Upgrade" > "SDCard Upgrade". You will then be prompted a message box, kindly check on "OK" to proceed with downgrade.
4) This downgrade will take about 5-10minutes, at the end you may even see a Warning Notifcation indicating "Software Upgrade Failed", but that's totally fine, You can now reboot the phone by following the on screen instructions.
5) Congratulations ! You are now free to install any available stable Lollipop version by accessing to http://consumer.huawei.com/my/support/index.htm
Thanks download and upload to mega and Put to my topic.
Send frome globe
Hi,
I simply cant reach step 4. When I try to launch the UPDATE.APK, my mobile restart to TWRP and nothing happen. I guess it is because the TWRP is here? Is there a way to unistall it? Or Is there an other way to launch that UPDATE.APK?
Thx a lot for any help.
I guess I need to flash stock recovery? Anyone has stock recovery download link, which can be used for B511?
Yeeeeah... The ultimate, simple and easy to follow guide! Just 2 files to mess with and you are good to go. Worked great on the first try. For the others, you have to be using stock recovery and it is preferred not to be rooted.
Thanks!
Someone has tested for TL10? It works?
Sent from my JAZZ using XDA Free mobile app
just tried it. worked a treat. thanks
Zolocofxp said:
Yeeeeah... The ultimate, simple and easy to follow guide! Just 2 files to mess with and you are good to go. Worked great on the first try. For the others, you have to be using stock recovery and it is preferred not to be rooted.
Thanks!
Click to expand...
Click to collapse
So after using the trasition package and restart you eill still in marshmallow ? Or cb500 ?
---------- Post added at 10:20 AM ---------- Previous post was at 09:26 AM ----------
windfield said:
I guess I need to flash stock recovery? Anyone has stock recovery download link, which can be used for B511?
Click to expand...
Click to collapse
I have a tool that is awesome if you still dont have stock recovery for lollipop then replay to me and i will send you the file by miga !!
Noomy said:
So after using the trasition package and restart you eill still in marshmallow ? Or cb500 ?
---------- Post added at 10:20 AM ---------- Previous post was at 09:26 AM ----------
Click to expand...
Click to collapse
Correct, you will still be on MM.
Thanks man ..
Thanks, tested on MT7-TL10, the best way for to return on Lollipop after MM
Could you please tell me how to get from B500 (downgraded with your tutorial) to B522?
Thank you very much!
I'm still downgrade my phone but i'm block after step 4. I have alaway MM.
I need download a Lolipop rom and retry step 3 ?
KoganFR said:
I'm still downgrade my phone but i'm block after step 4. I have alaway MM.
I need download a Lolipop rom and retry step 3 ?
Click to expand...
Click to collapse
If you are in b500 indeed you are ready to downgrade with a lollipop stock rom. Use the same steps but with the LL rom
meric54 said:
If you are in b500 indeed you are ready to downgrade with a lollipop stock rom. Use the same steps but with the LL rom
Click to expand...
Click to collapse
I'm on B500 too, but I'm unable to downgrade or even upgrade to other version. Maybe I don't have right version, so could you please tell me which version to use? When I tried to downgrade to B329 (official from Huawei site), updater goes to 5%, than I get error: "Software install failed!".
Please, help me out and thanks!
Try b331
Send from hell ✌
Or B326.
Sent from my HUAWEI MT7-L09 using Tapatalk
chudy_85 said:
Try b331
Send from hell
Click to expand...
Click to collapse
Pablo87 said:
Or B326.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
With both of this ROMs I get EMUI logo with 3 options too choose:
- Reboot system now
- Wipe data/factory reset
- Wipe cache partition
Any hint?
Thanks!
Push 3 bottom and when you see huawei logo release power and hold 10 sec volume
Send from hell ✌
Please help me, my Mate 7 MT7-L09 says "Installing update... 5%".
Cyanogen recently pused out COS13.1 for our beloved OPO.
Here is the link to OTA :-
http://builds.cyngn.com/incremental/bacon/cm-bacon-64003595ee-to-ced5430fc0-signed.zip 378 MB
"Upgrade your device to Cyanogen OS 13.1. Based on Android™ 6.0.1, Marshmallow, this update provides critical security fixes, improved stability/performance, product upgrades, and new mods for Cortana, OneNote, Microsoft Hyperlapse, Skype, and Twitter."
Changelog :-
Complete changelog currently unknown.
1st June Android Security patch level
Some MOD Addons.
Skype integration in dialer.Removal of NextDialer. Looks like stock dialer.
Hyperlapse mod in camera.
Update Instruction :-
Stock Unrooted Devices
To flash OTA you need stock unrooted phone.
Flash via stock recovery.
Rooted devices
1st unroot the device or flash system image from previous update then flash the OTA from recovery.
Hi, i've a problem flashing the OTA update...
TWRP locks the update giving me the error7
I've completly unrooted with SuperSU settings.
Thanks a lot.
gigatroned said:
Hi, i've a problem flashing the OTA update...
TWRP locks the update giving me the error7
I've completly unrooted with SuperSU settings.
Thanks a lot.
Click to expand...
Click to collapse
try flashing from stock recovery !
gauravsaini964 said:
try flashing from stock recovery !
Click to expand...
Click to collapse
Same for me lol
gigatroned said:
Hi, i've a problem flashing the OTA update...
TWRP locks the update giving me the error7
I've completly unrooted with SuperSU settings.
Thanks a lot.
Click to expand...
Click to collapse
flash the stock system with the correct recovery over, then flash update
stock recovery here. in the middle of the update it gives me an error.
All the page with red fonts, after a few second the message disappear and I have not been fast enough to read.
after reboot everything it is normal, but still COS 13.0
dam76 said:
stock recovery here. in the middle of the update it gives me an error.
All the page with red fonts, after a few second the message disappear and I have not been fast enough to read.
after reboot everything it is normal, but still COS 13.0
Click to expand...
Click to collapse
Try to install the previous update, and then with recovery stock reinstall the last update.
alijoregon said:
Try to install the previous update, and then with recovery stock reinstall the last update.
Click to expand...
Click to collapse
thanks, I tried installing previous update (same file cm-bacon-64003595ee-to-ced5430fc0-signed.zip that gave me Marshmallow in the first place)
but it gave me the same error again!
This time I took a screenshot with an old phone:
http://i.imgur.com/sW5NTyb.jpg
dam76 said:
thanks, I tried installing previous update (same file cm-bacon-64003595ee-to-ced5430fc0-signed.zip that gave me Marshmallow in the first place)
but it gave me the same error again!
This time I took a screenshot with an old phone:
http://i.imgur.com/sW5NTyb.jpg
Click to expand...
Click to collapse
Is your previous update the full OTA? The incremental is not valid. If you did root any time your system is modified. You must reinstall the full zip.
alijoregon said:
Is your previous update the full OTA? The incremental is not valid. If you did root any time your system is modified. You must reinstall the full zip.
Click to expand...
Click to collapse
yes: my system was rooted, so I had to perform a full wipe and install what I think to be the full zip (cm-bacon-64003595ee-to-ced5430fc0-signed.zip 377MB)
where can I download the full zip just to make sure?
does the full zip update wipe apps and data?
thanks in advance for the help
dam76 said:
yes: my system was rooted, so I had to perform a full wipe and install what I think to be the full zip (cm-bacon-64003595ee-to-ced5430fc0-signed.zip 377MB)
where can I download the full zip just to make sure
thanks in advance for the help
Click to expand...
Click to collapse
This time you needn't do full wipe. Only installing the full OTA via TWRP and then you must come back to the original recovery and install the incremental update. By this way you will have the last update.
All the links are in a post on this web, I don't remember the name of the post, but is easy to find.
alijoregon said:
This time you needn't do full wipe. Only installing the full OTA via TWRP and then you must come back to the original recovery and install the incremental update. By this way you will have the last update.
All the links are in a post on this web, I don't remember the name of the post, but is easy to find.
Click to expand...
Click to collapse
thanks! here I found the CM13.0 Signed flashable zip
cm-13.0-ZNH0EAS2JK-bacon-signed.zip 691 MB
rebooting
applying full zip via stock recovery
rebooting - everything apparently the same
applying update via stock recovery
rebooting... optimizing apps...
success! COS 13.1 up and running! (phone very warm though)
thank you very much for the support. (why messing with android must be so complicated?)
Hi, i also have an ERROR while installing the OTA.
1. I had updated to CM13 via OTA.
2. Since I had an issue with stuck lockscreen , installed TWRP and wiped cache ( Stock CM recovery was not helping). Phone worked great since then.
3. TWRP was not longer there, instead CM Recovery.
4. New update has arrived, but i get an "ERROR" word in the middle of screen while installing.
What can I do?
Thank you in advance for your response.
Seems to be fine. Minimal fixes but at least something...
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
leokook said:
Hi, i also have an ERROR while installing the OTA.
1. I had updated to CM13 via OTA.
2. Since I had an issue with stuck lockscreen , installed TWRP and wiped cache ( Stock CM recovery was not helping). Phone worked great since then.
3. TWRP was not longer there, instead CM Recovery.
4. New update has arrived, but i get an "ERROR" word in the middle of screen while installing.
What can I do?
Thank you in advance for your response.
Click to expand...
Click to collapse
thanks! here I found the CM13.0 Signed flashable zip
cm-13.0-ZNH0EAS2JK-bacon-signed.zip 691 MB
rebooting
applying full zip via stock recovery
rebooting - everything apparently the same
applying update via stock recovery
rebooting... optimizing apps...
success! COS 13.1 up and running! (phone very warm though)
thank you very much for the support. (why messing with android must be so complicated?)
USER ABOVE YOU POSTED HOW HE DID IT. FOLLOW HIS GUIDE AND THANK HIM
anyone have problem with titanium backup on latest ota s1kn ? i cannot freeze and restore app , any idea ? su version 2.65
Are there also any changes with the camera?
prototyp01 said:
Are there also any changes with the camera?
Click to expand...
Click to collapse
Hyperlapse got added !
Is overall camera quality better than before? Or is Hyperlaps the only change?
prototyp01 said:
Is overall camera quality better than before? Or is Hyperlaps the only change?
Click to expand...
Click to collapse
I am sure some one else will be able to answer this better
I haven't flashed this update yet neither I am camera enthusiast.
Updated on this one yesterday, and I regret it....my phone now charges very slow, it took 8 hours to fully charge, dont have this issue before, tried everybody else fixes, but did nothing...do anybody has the flashable ZIP on the previous version and can be flashed using stock recovery?
Thanks
Since lollipop there is no manual update option in huawei updater and even the huawei stock recovery has no or less interface which has no adb sideload option. This became a crunch to flash the update which your friend got and which u dont.
This Method is Universal for all huawei devices
In order to apply ota update using this method , root access is a major requirement so be sure your device is rooted.
If u had twrp recovery , at first flash SuperSu package to root your device (Try systemless root only) .
After successfull root ,flash stock recovery from twrp and reboot system.
Step 1:
In my case b370 is the last ota i found for kiw-l22 which vsriram92 posted here . Thanks to him for posting the update before 99% users got their update :good:
Download the relevant update package (ota) which you need a relevant base package to install it on . Ex: b360 as base for b370 update
step 2:
just remember the path where u downloaded the package . Install Flashify from playstore or From Here
Select Zip file which is the third option in flashify .
step 3 :
Navigate to the path where u downloaded ota package select the update.zip (ota package).
flashify starts downloading the package to its path asks you for root access .
Grand Su permissions , Select Cwm recovery if flashify asks as the next option.
Now the phone reboots to recovery and starts flashing.
After the ota update , your device will be unrooted . so take a backup of your stock recovery by following below guide.
Enable Usb debugging and connect ur phone to pc.
navigate to adb folder and place twrp.img or recovery.img in adb folder ,open command window from the same folder and type
Code:
adb reboot bootloader
Now type
Code:
fastboot boot recovery.img
or what_ever_its_name.img
now it temporarily boots twrp , take a backup of your stock recovery and then flash twrp for permanent install and then reroot ur device.
Happy flashing :laugh::good:
it gets zip signature verification failed....the method is similar to installing the zip file directly from the recovery but that doesn't work unless zip signature is verified
rbtrai said:
it gets zip signature verification failed....the method is similar to installing the zip file directly from the recovery but that doesn't work unless zip signature is verified
Click to expand...
Click to collapse
You might have installed a zip which is not stock ota update . i haven't posted this without trying . I installed b370 with this method and made this live here .
i downloaded from the link provided above which vsriram92 posted...
rbtrai said:
i downloaded from the link provided above which vsriram92 posted...
Click to expand...
Click to collapse
Were you in b360 before doing this ?
Thanks again Gopi. Another great contribution.
vsriram92 said:
Were you in b360 before doing this ?
Click to expand...
Click to collapse
yes ofcourse
This only for rooted phone ?
I'm having honor 4x unroot and I don't know how to install the ota file. Is there any way for upgrading a phone without root option and in my phone there is no local update option
Ajith san said:
This only for rooted phone ?
I'm having honor 4x unroot and I don't know how to install the ota file. Is there any way for upgrading a phone without root option and in my phone there is no local update option
Click to expand...
Click to collapse
Nope. It was there in EMUI 3 previously. Now, we can't unless it has only update.app.
so b370 is only for the ones who gave root access to their phones?
Like your contribution. Perfectly updated to B370.
rajibie said:
Like your contribution. Perfectly updated to B370.
Click to expand...
Click to collapse
great
Hello together, I tried flashing the B360 update for my L21 with this method but unfortunately I did not succeed. I followed every step but when flashify reboots to the stock recovery nothing happens. Just nothing.
I used the file for the L21 that I linked to in this post.
Any suggestions how to get it to work?
Zacki06 said:
Hello together, I tried flashing the B360 update for my L21 with this method but unfortunately I did not succeed. I followed every step but when flashify reboots to the stock recovery nothing happens. Just nothing.
I used the file for the L21 that I linked to in this post.
Any suggestions how to get it to work?
Click to expand...
Click to collapse
Are you on B350D0003 or some earlier firmware? I'm on stock B350, just rooted with Magisk+phh's superuser, and it doesn't want to flash that big file at all; tried flashing OTA update (200MB file) and it failed at 80%, causing a damn bootloop. Gah, I thought my old phone was pain in the ass...
ShadySquirrel said:
Are you on B350D0003 or some earlier firmware? I'm on stock B350, just rooted with Magisk+phh's superuser, and it doesn't want to flash that big file at all; tried flashing OTA update (200MB file) and it failed at 80%, causing a damn bootloop. Gah, I thought my old phone was pain in the ass...
Click to expand...
Click to collapse
I'm on B350D003. After I tried the OTA instead of the full package I came across the same problem with the stock recovery, but when flashing it from TWRP it did flash it, but exited with an error.
No bootloop but as a file was missing for the full update process wifi (and probably bluetooth) are not working.
If you are interrested to solve it, have a look here. It looks like there is a way to fix the problem and we are currently investigating.
Zacki06 said:
I'm on B350D003. After I tried the OTA instead of the full package I came across the same problem with the stock recovery, but when flashing it from TWRP it did flash it, but exited with an error.
No bootloop but as a file was missing for the full update process wifi (and probably bluetooth) are not working.
If you are interrested to solve it, have a look here. It looks like there is a way to fix the problem and we are currently investigating.
Click to expand...
Click to collapse
TBH, I'm on a verge to start building LOS or PAC/Slim/whatever is properly maintained and fast for my own needs and ditch EMUI completely....
I'm searching for other firmwares now via FirmwareFinder, there is a probability that one is a leaked test or something like that, because it simply doesn't want to flash. If I find out something, I'll continue on thread you've linked, to avoid flooding this one.
Hi. Thanks for your guide.
I need to update my phone with several ota updates. I just need to repeat this guide's procedure until updated to the last ota or there is a better way to do that?
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
rajibie said:
Like your contribution. Perfectly updated to B370.
Click to expand...
Click to collapse
How to update step by step.. Mention it plz
Tapan Patel said:
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
How to update step by step.. Mention it plz
Click to expand...
Click to collapse
Just because you can't do it, that doesn't mean it's fake.
Tapan Patel said:
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
How to update step by step.. Mention it plz
Click to expand...
Click to collapse
Just follow the procedure and you will be done
Good Morning everybody,
so yesterday was a rough day and when it eventually end i recive the october security update on the phone, without thinking i installed it and the phone does not boot up , instead i face my recovery (TWRP 3.1.1-0).
Of course i've made a mess because i was on stock rooted 7.0 on my retEU XT1572 phone with unlocked bootloader and status 3
i've tryed to restore a previous nandroid backup wihtout success, so today i downloaded the new RESURRECTION REMIX v5.8.4 (4 december wich is based on stock android 7) but i have no luck even with that...
Do i miss something?is there any rom to try with now? or i have to make a downgrade of my firmware to make it work again?
thanks in advice!
UPDATE:
phone boot now but always in recovery and after rebooting in bootloader i can reboot system from there.. it seems that if you download an update and the install process doesen't go in place every time you restart the device it always try to re-flash it, that's why i'm always in recovery.. i foun a similar post with this solution but i think it need some changes before it will work on our device (but i don't have the knowledge to set it right :S )
LAST UPDATE:
boot fixed by using this command in twrp recovery
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
You missed very much.
Here is stock RetEu, before october update:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
Wipe all with twrp and flash all. After it you can get OTA's.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Here is RR 5.8.5 working on N modem:
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page40 post #397
Wipe all with twrp, update twrp to 3.2 and you can flash it right now.
@
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
@Husky34
oh thanx man! i've already seen that post but i wasn't sure that it can work for me. i have some question befor starting:
1) i need the new twrp 3.2 to flash resurrection-remix? because as i mention before i've already tried to flash it with twrp 3.1 and it doesen't work (the rom is the same that you linked page40 post #397 )
2) do i have to flash stock-xt-1572-reteu-7-0-ddumped-files before point 1)?
dzidexx said:
You missed very much.
Here is stock RetEu, before october update:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
Wipe all with twrp and flash all. After it you can get OTA's.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Here is RR 5.8.5 working on N modem:
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page40 post #397
Wipe all with twrp, update twrp to 3.2 and you can flash it right now.
@
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
@Husky34
Click to expand...
Click to collapse
Husky34 said:
oh thanx man! i've already seen that post but i wasn't sure that it can work for me. i have some question befor starting:
1) i need the new twrp 3.2 to flash resurrection-remix? because as i mention before i've already tried to flash it with twrp 3.1 and it doesen't work
2) do i have to flash stock-xt-1572-reteu-7-0-ddumped-files before point 1)?
Click to expand...
Click to collapse
1. I think so. 3.2.x will be needed for future builds.
1a. You flashed RR for MM modem.
2. No, but this is only way to get ota update.
"swearing in italian" it was a twrp bug.. after a backup restore if you hit restart the phone restart in recovery, you need to boot into bootloader and reboot system from there -.-
thanks to all of you guys!!
strange fact, now if i turn off the phone and again on i'm still on recovery, i have to reboot bootloader and system from there.
i think something is pointing at the recovery instead system..
edit: it seems that if you download an update and the install process doesen't go in place every time you restart the device it always try to re-flash it, that's why i'm always in recovery.. i foun a similar post with this solution but i think it need some changes before it will work on our device (but i don't have the knowledge to set it right :S )
Ota update didn't end.
I think you can try clear data & cache otaupdate app and disable it. Link2sd can help with it. @Husky34
dzidexx said:
Ota update didn't end.
I think you can try clear data & cache otaupdate app and disable it. Link2sd can help with it. @Husky34
Click to expand...
Click to collapse
just tried but wihout luck.. maybe i can wait someone make the flashable update but i don't think this fix the issue
Flash uploaded stock.
dzidexx said:
Flash uploaded stock.
Click to expand...
Click to collapse
actually i fixed the issue using this command
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
Husky34 said:
actually i fixed the issue using this command
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
Click to expand...
Click to collapse
thanks, this command just saved me. but misc file in my XT1575 is under
/dev/block/platform/0/f9824900.sdhci/by-name/misc
but now I can't check system update in the OS anymore, I think flash back factory recovery mine help. Do you know where to download stock 7.0 recovery for 1575?
Edit: found it for 1575 here.
pshadoww said:
thanks, this command just saved me. but misc file in my XT1575 is under
/dev/block/platform/0/f9824900.sdhci/by-name/misc
but now I can't check system update in the OS anymore, I think flash back factory recovery mine help. Do you know where to download stock 7.0 recovery for 1575?
Edit: found it for 1575 here.
Click to expand...
Click to collapse
you can also use link2sd to disable the update app so it doesn't bother you,
or wait untill someone create a zip of the update and flash it into recovery.
thanks, that worked for me as well.
File was located at /dev/block/platform/soc.0/f9824900.sdhci/by-name/misc