Related
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
y3kt said:
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
Click to expand...
Click to collapse
Wow, sorry to hear this. the battery went dead before jtag finished? ouch. QPST will not help for this, a phone will still boot with no IMEI, this is not good, may want to start a warranty ticket on it. I have a jtag box, so there is a release update for the G4 for it? I did not know this, haven't check in awhile, pull the battery for a good while, replace and charge all the way, and give it one more shot. Sorry bro.
TheAxman said:
Wow, sorry to hear this. the battery went dead before jtag finished? ouch. QPST will not help for this, a phone will still boot with no IMEI, this is not good, may want to start a warranty ticket on it. I have a jtag box, so there is a release update for the G4 for it? I did not know this, haven't check in awhile. pull the battery for a good while, charge all the way, and give it one more shot. Sorry bro.
Click to expand...
Click to collapse
This is exactly what I didn't want to hear :crying:
I have used Riff as JTAG solution.
Unfortunately warranty is not an option for me so I will pull the battery for a couple of days before I try again. At this point it seems is really dead.
I have found many files for QPST that are supposed to do everything to a dead phone, even a command line utility for the same purpose, with some hex and mbn files, but as I said they all failed, it seems to me that eMMC chip is not working at all.
I'll keep you updated if I ever find a way to fix this phone.
y3kt said:
This is exactly what I didn't want to hear :crying:
I have used Riff as JTAG solution.
Unfortunately warranty is not an option for me so I will pull the battery for a couple of days before I try again. At this point it seems is really dead.
I have found many files for QPST that are supposed to do everything to a dead phone, even a command line utility for the same purpose, with some hex and mbn files, but as I said they all failed, it seems to me that eMMC chip is not working at all.
I'll keep you updated if I ever find a way to fix this phone.
Click to expand...
Click to collapse
I did not know this, I will keep that in mind for future ref. Really hope you get it going.
Please read forum rules before posting
Questions and help issues go in Q&A and help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
y3kt said:
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
Click to expand...
Click to collapse
i have the same problem but i need an imge file to write it im my device (m919) do u have one?
shadigsm said:
i have the same problem but i need an imge file to write it im my device (m919) do u have one?
Click to expand...
Click to collapse
Yes, I do have an M919 dump image from a working phone you can use.
Here you have the link http://jtagbox.com/downloads/m919/M919.rar
y3kt said:
Hi, I have a bricked I337 and I would like to have some opinions before I give up trying to fix it.
Here is a short version of what I have done.
The phone came to me with null IMEI which I was trying to fix. After trying several tools, the phone became dead, no boot, nothing. At this point I went for a JTAG solution. JTAG software detected it well, and repair procedure was successfull as reported by JTAG software, phone was still dead.
With the help of the JTAG software programmer I got an M919 full dump which I tried to write to phone, after 4 hours of writing the dump, battery completely died at 95% of writing. I recharged battery and after that moment have been unable to connect with phone via JTAG. JTAG software detects its hardware ID but can't initialize phone for writing.
I have read every unbrick thread from other phones, have tried QPST with many files I have found on the way and all I get are errors. So I have been unable to communicate with phone.
Is this finally a faulty phone? Have anyone have another idea?
Click to expand...
Click to collapse
Hi, I was wondering if you got your problem solved, I too have a Galaxy S4 M919 which came to my shop also with IMEI null, I also tried to repair it with RIFFBOX and the phone is dead now. I want to know if you repaired your phone and how you did it. Thank you very much. I also tried the M919 full dump you posted but the riffbox wont recognize it.
frankjasmin said:
Hi, I was wondering if you got your problem solved, I too have a Galaxy S4 M919 which came to my shop also with IMEI null, I also tried to repair it with RIFFBOX and the phone is dead now. I want to know if you repaired your phone and how you did it. Thank you very much. I also tried the M919 full dump you posted but the riffbox wont recognize it.
Click to expand...
Click to collapse
Hi, yes, I did repair the phone with RIFF BOX and a dump from a working phone the RIFF BOX programmer sent me.
y3kt said:
Yes, I do have an M919 dump image from a working phone you can use.
Here you have the link http://jtagbox.com/downloads/m919/M919.rar
Click to expand...
Click to collapse
Wow, they usually don't do that, keep that puppy in a safe location
Good deal.
y3kt said:
Hi, yes, I did repair the phone with RIFF BOX and a dump from a working phone the RIFF BOX programmer sent me.
Click to expand...
Click to collapse
Can you share the dump for the I337?
I'm having the same problem with my S4.
Thanks a lot...
I'm am in a loop, how do I flash from odin?
realgadawg said:
I'm am in a loop, how do I flash from odin?
Click to expand...
Click to collapse
You don't need to use ODIN to fix a boot-loop, just use the 3-button combo to go into recovery and flash a backup or a ROM (Following proper wiping steps).
y3kt said:
Hi, yes, I did repair the phone with RIFF BOX and a dump from a working phone the RIFF BOX programmer sent me.
Click to expand...
Click to collapse
can you share a working link with the dump for m919 please i need one to repair my dead i337
I have a RIFF BOX. I have an M919 here that is completely dead. I tried 3 P.C.'s that won't even detect it. RIFF doesn't see it either. Any ideas on what my options are ? This is driving me crazy, please help
First of all, sorry if this in wrong section or its already covered, I tried many similar post but nothing helped me.
I had my phone rooted and custom rom installed, then today I tried to install a new rom and now I think I got my phone bricked,
It says in download mode ( partly ) and can't do anything with that, my phone is F320L model, please see the attached picture to see where I am stuck,
Please help me to get my phone running back.
thanks,
Nuwan.
nuwaus said:
First of all, sorry if this in wrong section or its already covered, I tried many similar post but nothing helped me.
I had my phone rooted and custom rom installed, then today I tried to install a new rom and now I think I got my phone bricked,
It says in download mode ( partly ) and can't do anything with that, my phone is F320L model, please see the attached picture to see where I am stuck,
Please help me to get my phone running back.
thanks,
Nuwan.
Click to expand...
Click to collapse
can skr tools help here?
raptorddd said:
can skr tools help here?
Click to expand...
Click to collapse
Please guide me how can I go into fastboot mode from here or fix the Download Mode, I think my download mode is broken,
thanks
raptorddd said:
can skr tools help here?
Click to expand...
Click to collapse
Update 1 : I got "Download Mode" working with help of SRK Tools, now trying to flash with Flash tool, but it does not work for me yet, where can I find proper KDZ file to flash, I'm trying with "F320L30D_00.kdz"
please help...
Thanks
nuwaus said:
Update 1 : I got "Download Mode" working with help of SRK Tools, now trying to flash with Flash tool, but it does not work for me yet, where can I find proper KDZ file to flash, I'm trying with "F320L30D_00.kdz"
please help...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2687260
not sure about 30D
http://forum.xda-developers.com/showthread.php?t=2475045
raptorddd said:
http://forum.xda-developers.com/showthread.php?t=2687260
not sure about 30D
http://forum.xda-developers.com/showthread.php?t=2475045
Click to expand...
Click to collapse
Thank you for the reply,
I tried this way, then i get this
but in back of my phone it clearly mentioned F320L
I'm confused what to do now,
please help..
thanks.
nuwaus said:
Thank you for the reply,
I tried this way, then i get this
but in back of my phone it clearly mentioned F320L
I'm confused what to do now,
please help..
thanks.
Click to expand...
Click to collapse
mmmm.. its funny is your phone a f320L does it have memory card slot.? and removable battery.? or is it refurbished with different motherboard.?
or the file or step you are doing is wrong.
post that picture here the guy there should help you hes very friendly.. just be very specific adn give him all info..
http://forum.xda-developers.com/showthread.php?t=2432476
raptorddd said:
mmmm.. its funny is your phone a f320L does it have memory card slot.? and removable battery.? or is it refurbished with different motherboard.?
or the file or step you are doing is wrong.
post that picture here the guy there should help you hes very friendly.. just be very specific adn give him all info..
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi,
Yes, it has memory card slot and removable battery,
And i'm very sure, earlier I used F320L based roms and worked well.
I think some strange thing happened when unbrick with SRK tools, BTW now i'm downloading D802 firmware to install,
please let me know if there anything to fix this issue,
thanks!!
nuwaus said:
Hi,
Yes, it has memory card slot and removable battery,
And i'm very sure, earlier I used F320L based roms and worked well.
I think some strange thing happened when unbrick with SRK tools, BTW now i'm downloading D802 firmware to install,
please let me know if there anything to fix this issue,
thanks!!
Click to expand...
Click to collapse
no dont download anythhing or flash until you know what model is it.. tell that to hyelton tha has memory card slot and removable battery.. and that you have used roms before... dont do anyting just wait till he tells you what to do. dont mess with it anymore..
raptorddd said:
no dont download anythhing or flash until you know what model is it.. tell that to hyelton tha has memory card slot and removable battery.. and that you have used roms before... dont do anyting just wait till he tells you what to do. dont mess with it anymore..
Click to expand...
Click to collapse
It's F320L, it's clearly mentioned on the back panel of the phone, and in the sticker underneath the batter, also I've used F320L based roms earlier.
But now it act as a D802, I don't know why
Please note, I have no access to Download, fastboot or ADB right now, only thing I can do is boot(end up in boot loop) and go into factory reset option by pressing and holding VOL+ and POWER
nuwaus said:
It's F320L, it's clearly mentioned on the back panel of the phone, and in the sticker underneath the batter, also I've used F320L based roms earlier.
But now it act as a D802, I don't know why
Please note, I have no access to Download, fastboot or ADB right now, only thing I can do is boot(end up in boot loop) and go into factory reset option by pressing and holding VOL+ and POWER
Click to expand...
Click to collapse
okey tell him that, and wait for his help , i dont know he does.. so follow what he suggest. good luck
raptorddd said:
okey tell him that, and wait for his help , i dont know he does.. so follow what he suggest. good luck
Click to expand...
Click to collapse
I will, thanks!
hi
i just flash the Android N Preview it worked normaly then i flash TWRP through Temporary Recovery then i reboot and BAM . Nothing there.
Black display , no bootloader,nothing
just when pluging the device it showed qhsusb_Bulk Driver on Windows
Any Help ?
and if i send it back to google does it cover the Warranty?
Google probably won't do anything for you as you installed it at your own risk
mustafa alzubaidy said:
hi
i just flash the Android N Preview it worked normaly then i flash TWRP through Temporary Recovery then i reboot and BAM . Nothing there.
Black display , no bootloader,nothing
just when pluging the device it showed qhsusb_Bulk Driver on Windows
Any Help ?
and if i send it back to google does it cover the Warranty?
Click to expand...
Click to collapse
No it won't be covered by warranty. What do you mean you flashed TWRP through temporary recovery? Exactly what TWRP did you flash? The filename please.
Good news: your phone is not dead. I've had this issue once with my OnePlus One and I was able to get if fixed.
Bad news: process was a little bit harder than standard flashing, unlocking, etc. stuffs.
Heisenberg said:
No it won't be covered by warranty. What do you mean you flashed TWRP through temporary recovery? Exactly what TWRP did you flash? The filename please.
Click to expand...
Click to collapse
i use the NRT toolKit to flash TWRP (it provide temporary Recovery to flash any zip then it goes back to stock , i did this earlier its not the cause) it boot the recovery and i flashed this file :
twrp-3.0.0.0-s2vep-20160208 (then i realized it is the wrong file in the wrong folder)
after that i reboot the device and got bricked.
anmar21 said:
Good news: your phone is not dead. I've had this issue once with my OnePlus One and I was able to get if fixed.
Bad news: process was a little bit harder than standard flashing, unlocking, etc. stuffs.
Click to expand...
Click to collapse
ok can you give me a link or something ? i am a techy guy and can learn easily.(hopefully)
mustafa alzubaidy said:
i use the NRT toolKit to flash TWRP (it provide temporary Recovery to flash any zip then it goes back to stock , i did this earlier its not the cause) it boot the recovery and i flashed this file :
twrp-3.0.0.0-s2vep-20160208 (then i realized it is the wrong file in the wrong folder)
after that i reboot the device and got bricked.
Click to expand...
Click to collapse
Yeah, wrong recovery, big mistake.
mustafa alzubaidy said:
ok can you give me a link or something ? i am a techy guy and can learn easily.(hopefully)
Click to expand...
Click to collapse
You need special Qualcomm tools to recover, I haven't seen such a tool for this device yet though.
Heisenberg said:
Yeah, wrong recovery, big mistake.
You need special Qualcomm tools to recover, I haven't seen such a tool for this device yet though.
Click to expand...
Click to collapse
i search the net i found that for lG G2 , LG G3
any idea
how much time should i wait if such a tool appears?
thanks for you help
mustafa alzubaidy said:
i search the net i found that for lG G2 , LG G3
any idea
how much time should i wait if such a tool appears?
thanks for you help
Click to expand...
Click to collapse
It's impossible to say if or when it might become available.
@Heisenberg
Flashing the wrong recovery should have corrupted( or affected ) only the recovery partition, shouldn't it. From the description the OP has given it looks like the bootloader is corrupt, which is kind of weird
Have you seen this kind of problem on any other device ( coming from a moto g to n6p I thought the bootloader corruption things were over for me , but after reading this thread I am little terrified )
sjandroiddeveloper said:
@Heisenberg
Flashing the wrong recovery should have corrupted( or affected ) only the recovery partition, shouldn't it. From the description the OP has given it looks like the bootloader is corrupt, which is kind of weird
Have you seen this kind of problem on any other device ( coming from a moto g to n6p I thought the bootloader corruption things were over for me , but after reading this thread I am little terrified )
Click to expand...
Click to collapse
It corrupts the partition table which affects the other partitions.
mustafa alzubaidy said:
ok can you give me a link or something ? i am a techy guy and can learn easily.(hopefully)
Click to expand...
Click to collapse
For my OPO I used a tool and as @Heinsenberg mentioned I've never seen such a tool for the 6P yet. RMA would be the best solution, just say your not able to turn your phone on (which is true) .
sjandroiddeveloper said:
@Heisenberg
Flashing the wrong recovery should have corrupted( or affected ) only the recovery partition, shouldn't it. From the description the OP has given it looks like the bootloader is corrupt, which is kind of weird
Have you seen this kind of problem on any other device ( coming from a moto g to n6p I thought the bootloader corruption things were over for me , but after reading this thread I am little terrified )
Click to expand...
Click to collapse
me too!
i have flashed many rom with many devices , i even flashed a rom by enterning a download rom on a black screen and it worked!
but flashing wrong recovery i dont think it will cause such brick
FYI when i connect it to the PC it is recognized and when i contiously press the power buttuon it re-connected to the pc
If he really sends the device in and Google finds out HOW exactly the phone died, he might face severe consequences. It´s dishonest after all.
If you flash the wrong recovery for a different device, it´s your own bad luck. Now here´s the deal, you can still repair the device if a) Huawei would fix it or b) find a phone shop which could replace the motherboard. Once the Bootloader is bricked, there´s barely anything a regular user could do except for some complicated methods which require the knowledge and the special tools which most people don´t have.
anmar21 said:
For my OPO I used a tool and as @Heinsenberg mentioned I've never seen such a tool for the 6P yet. RMA would be the best solution, just say your not able to turn your phone on (which is true) .
Click to expand...
Click to collapse
mustafa alzubaidy said:
me too!
i have flashed many rom with many devices , i even flashed a rom by enterning a download rom on a black screen and it worked!
but flashing wrong recovery i dont think it will cause such brick
FYI when i connect it to the PC it is recognized and when i contiously press the power buttuon it re-connected to the pc
Click to expand...
Click to collapse
Flashing the wrong recovery can and does cause such a brick, this is what you're experiencing. I've seen it happen on many devices, it borks the partition table.
mustafa alzubaidy said:
but flashing wrong recovery i dont think it will cause such brick
Click to expand...
Click to collapse
You can tell yourself this all day long, but the phone that is in your hands that is now a doorstop, is proof otherwise.
Very crappy situation, but this is why toolkits stink, and why you need to be VERY careful when you mess w the device.
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Important. What about refurbished g3, flashing wrong kdz will cause a super brick, first off all check the variant from the motherboard or just on the back of phone.
boot verification Fail !!! - Cause: MISMATC SIG LEN
I had a problem s LG g3 d850: after trying to flash rikaveri phone is not charged and does not go into the kind of rekaveri oshybki boot verification Fail !!! - Cause: MISMATC SIG LEN, after etoj inscriptions tolto indicator flashes blue krasnіm i . Help how to get back in aparata robochem state.
Tried your method does not poluchaetsa can be detailed instructions ? On the phone firmware 6.0
Guys one thing to be kept in mind.most of refurbished d855 doesn't come d855 board.so such errors arise because of wrong model of recovery flashing.so confirm your model by opening your phone and looking at the board.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Click to expand...
Click to collapse
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
duig said:
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
Click to expand...
Click to collapse
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
milance92 said:
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
Click to expand...
Click to collapse
windows 10 how do i disable driver signing ??please
duig said:
windows 10 how do i disable driver signing ??please
Click to expand...
Click to collapse
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Jahanzaibawan said:
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
this method u linked require to short mobo, my method dont, its way more simple.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
Good luck people!
Click to expand...
Click to collapse
Thank you so much! What would I do without you
Got "Boot verification failed" when I got into the secret menu and tried to do "device test".
I got Fulmics 6 ROM installed and the device failed for some reason to load the MiniOS (used by the "device test").
Wasted about 5 hours until I got to this post.
This post was so useful I almost cried out of joy.
THANKS!!!
EDIT:
mirrored the files in dropbox:
https://www.dropbox.com/sh/vn71zlrooyxe73d/AAABVAXEfYSQPlHhOLFql51Ra
For some reason the BoardDiag available here didn't work for me. It would always says "Serial port open FAILED".
I tried with willcracker version and it worked. You can download from here: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Just a few questions before I begin, I'm obviously... u know :
1. First, I install the drivers. In what state should the phone be in when I connect it to the PC? Probably in the only possible state, that means with the screen blank and the red and blue leds blinking, correct?
2. Do I have to remove the battery before connecting the phone?
3. Flashing the last partition, sbl1, causes the phone to reboot, right? So, in the last step when flashing the kdz, does the phone have to be in download mode?
Thanks!
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
No problem man. I dont own G3 anymore, switched back to my beloved G Pro 2 d838 since its updated to CM 13 and CM 14.1 I gifted G3 to my GF. But i still can try something usefull and post here if i find some.
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
Np bro.
Please help me. I have installed all drivers but my G3 D855 is not getting detected by my pc. My pc is running on Windows 7 64bit. Please help me..!
in case anyone is bothering with this in 2020+ on windows10, i did run into a few hiccups and managed to boot a 'bricked' phone I bought for 50 eur
1. Only install the approproate driver for your windows architecture of QDLoader
2. If LGFlashTool2014 is demanding mfc100.dll, you need to install a Microsoft Visual C++ 2010 Redistributable Package, yes, the x86 one: https://www.microsoft.com/en-us/download/details.aspx?id=5555
3. If after launching LGFlashTool2014 once, then closing, then launching again it doesn't turn on, you need to follow these steps: go to C:\Users\<YourWindowsUsername>\AppData\Local\Temp and delete everything you can, these are temporary files that programs on your pc store, they're not important, but LGFlashTool2014 for some reason makes some files that prevent it from launching
Since then the phone crashed a few times so I understand now how it got bricked, a faulty motherboard most likely, going to try baking it as described here: https://redd.it/5e0nx7 but this is irrelevant to the thread and just here for anyone stumbling upon in the distant dystopian future
Very informative post.
---------- Post added at 05:12 AM ---------- Previous post was at 04:53 AM ----------
very good post.
Hi there. I was on stock firmware when the OTA came. I did not installed for a while but when I did my phone went completely dead. I cannot boot into the bootloader nor the recovery. I cannot get fastboot to work. The only hope I have is when I connect it to Windows PC it recognizes it as Qualcomm HS-USB QDLoader 9008 (COM 3). After some research I found that I can do a blankflash, but i cannot find any blankflash files for my phone. So my question is - Is there any way to generate singleimage.bin (for blankflash) or any other way to recover it? Thank you!
Got the same problem. until now no blankflash files available, i guess. Only way is by jtag box. i tried with loader.img for moto x style but it doesnt work for moto x play.
I have the same problem, no blankflash files available until now?
alfafc said:
I have the same problem, no blankflash files available until now?
Click to expand...
Click to collapse
No...
I also have hard brick my phone. I want to get it fixed from this site, is this repair site legit : https://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html?m=1
Cooro said:
I also have hard brick my phone. I want to get it fixed from this site, is this repair site legit : https://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html?m=1
Click to expand...
Click to collapse
They are frauds.. Many have paid them and got screwed up.. Only way is to do Jtag Flashing or to change the Mother Board (much expensive)
No it is not legit I already got the files from them try my files and tell me if it works for you...also upload it in the global form if working
alwyn naresh said:
No it is not legit I already got the files from them try my files and tell me if it works for you...also upload it in the global form if working
Click to expand...
Click to collapse
It won't work for sure.. The whole project was sponsored by a guy in Hard bricked Moto X Play telegram group created by us.. The only way to fix it is Jtag flashing.. It may cost you around INR 1000.
How to approach jtag?
alwyn naresh said:
How to approach jtag?
Click to expand...
Click to collapse
Below is the address and contact no.. Call him and courier the device.
OMKAR SHINDE
Address
Shop No.2, Shree Datta Apts, Opposite Bramha Garden,
Near Veer Tanaji Ganpati Mandir,
Manikbaug, Pune - 411 051.
Mobile- +919850152245
[email protected]
Thank you so much. It is safe right.they will return the mobile right? Also I got all the unbrick files from ark but none is working any ideas on that? I got qfil files then blank flash files then loader file ...if I send the file to you do you think you can check them for me to see if it works....
alwyn naresh said:
Thank you so much. It is safe right.they will return the mobile right? Also I got all the unbrick files from ark but none is working any ideas on that? I got qfil files then blank flash files then loader file ...if I send the file to you do you think you can check them for me to see if it works....
Click to expand...
Click to collapse
I myself got it fixed from there.. He had fixed more than 200 devices by now.. He even receives devices from abroad.
Thank you very much sir.
alwyn naresh said:
Thank you very much sir.
Click to expand...
Click to collapse
You're welcome buddy.. Just don't waste time on blank flash files.. It just won't work as it isn't digitally signed by Motorola.. Get it fixed from Pune.. That's the only possible solution as of now.. Else you'll have to change the Mother Board..
Hello, after restoring the official firmware and working perfectly the phone, an OTA update appeared, small, I gave it to install as other times ... and from that moment the phone with the black screen.
It seems I'm not the only one, is there any way to revive it?
loparaan said:
Hello, after restoring the official firmware and working perfectly the phone, an OTA update appeared, small, I gave it to install as other times ... and from that moment the phone with the black screen.
It seems I'm not the only one, is there any way to revive it?
Click to expand...
Click to collapse
My daughters has just now done this, no lights, no boot, nothing
Anyway to fix it?
robneymcplum said:
My daughters has just now done this, no lights, no boot, nothing
Anyway to fix it?
Click to expand...
Click to collapse
There is nothing to do ... send it to Motorola and pay the settlement, which is not worth it, they asked me € 195 (according to them, you had to change the motherboard) ... so thrown away.
If it had been to mess with him, but after an official OTA. Never again Motorola.
loparaan said:
There is nothing to do ... send it to Motorola and pay the settlement, which is not worth it, they asked me € 195 (according to them, you had to change the motherboard) ... so thrown away.
If it had been to mess with him, but after an official OTA. Never again Motorola.
Click to expand...
Click to collapse
Jeez... I'm glad it happened when she was using it as a spare phone than me when it was my main phone! Thats a definite NEVER buying a motorola again, even if it was cheap at the time.
My Moto x play completely dead
My moto x play completely not working, I can't able to charge or switch Mobile.
I tried all flashmde or different types of to install., but my mobile was not detected.
But when I connect pc, its showing only Qualcomm name.
Also I tried qflash mode, mobile detecting Qualcomm connected details in my pc but its expecting content or stream file type of firmware stock file.
Can you assist any one where we can get moto x play qflash support file.
Thanks,
Rajesh Kumar R
9962038582