Related
hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
anyone?
pete022682 said:
hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
Click to expand...
Click to collapse
thats not even close to a hard brick it is in bootloader mode do not let it die keep it plugged in because if the battery dies then you have a real big problem im not sure what to do after this but i know you dont want the battery to die
well that's reassuring
Keeping phone plugged in. Now if I can get some tips as to why I cant get it to communicate with ubuntu in this bootloader mode to push the files I need. Any help anyone? Please. Where I go from here?
link - windows
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
pete022682 said:
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
Click to expand...
Click to collapse
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
I will try when I get home thanks for your help so far at work no computer access. Thanks again bender I will let you know how everything goes.
bender_007 said:
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
Click to expand...
Click to collapse
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
i was hoping so
bender_007 said:
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
Click to expand...
Click to collapse
so this is where were at bender....
got drivers installed, phone is being recognized...
pushed laf.img with your script...GOT DOWNLOAD MODE BACK!!yes, progress...
went to factory restore with .TOT method.....FAILED
shows PID#, IMEI#, MODEL,D801 DLL VS980 SBUV Xdabbeb's vs98024a 1.1.1 11 SWOV Xdabbeb's vs98024a 1.1.1 11 device doesn't match
ideally i would love to just turn this vs980 into a d801 stock kitkat by pushing all nessassary d801 files would that work what would be my options here?
How do i fastboot flash open recovery twrp IMG?
Ultra brick G2 vs980! T_T
Good night lords of XDA!
I come to you after exhausting all that I could find and try, hope you can enlighten me, you would save a new G2 that is about to become a gleaming brick:
Summary: I have in hand a Verizon LG G2 vs980, with the intention of using it in Spain. After a bad flash a ROM for a different model, you could not access recovery mode or download mode, only fastboot.
Thanks to this great tutorial, I could flash by ADB and fastboot files an official ROM for this G2, but after a correct process, the G2 restarted and only shows "Security error" before shutting ...
I still do not have access to recovery or download, and now not to fastboot. Only allows me to access the screen "Factory reset", but in doing nothing changes.
How could re-flash a recovery or something like that allows me relive my G2?
Thank you very much in advance. You are my salvation. XD
PS: I apologize for any clerical error or misused term. I do not usually write in English.
Click to expand...
Click to collapse
Sorry, wrong thread. XDD
Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance
ecko no yaro said:
Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance
Click to expand...
Click to collapse
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
Mati0807 said:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
Click to expand...
Click to collapse
did you try to go from lollipop to kitkat?
heavy_metal_man said:
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
ecko no yaro said:
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means
Click to expand...
Click to collapse
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
---------- Post added at 06:20 PM ---------- Previous post was at 06:05 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Right, you need to follow this guide i think. Ensure your read it fully before you attempt anything. Now, the lollipop update apparently changed some partitions so I would flash the bumped twrp from the development section instead of the 2.6.3.2 version recommended. Then once you can boot into recovery flash the rom recommended in this post
heavy_metal_man said:
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
Click to expand...
Click to collapse
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode
ecko no yaro said:
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode
Click to expand...
Click to collapse
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!
heavy_metal_man said:
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!
Click to expand...
Click to collapse
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so
ecko no yaro said:
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so
Click to expand...
Click to collapse
Hmmm. im stumped. I think its a bit of a catch 22 here. What i think has happened is that the rom flash that was done has changed some of the partition layout, but the methods of fixing that issue is either with DD commands from a custom recovery (which you dont have and cannot flash) or with DD commands using ubuntu when the device is auto-mounting all of your partitions. Its worth a look if you have an ubuntu disk around, if not download here, burn to disk or mount it to a bootable usb and see if ubuntu has any luck with it. Either that or try installing any drivers you can on the pc to get download mode working.
there is also this as a last resort but i've never had to do this so i cannot vouch for it :-/ Good luck pal.
Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
and install bumped recovery 2.8.5.1, then next with otg cabble flash these http://forum.xda-developers.com/showpost.php?p=59079665&postcount=536.
and now i install cloudyg2 and i feel great xD thank you!
Mati0807 said:
Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
dear do you have above mentioned tool bcoz i can not download , this page do not open
Click to expand...
Click to collapse
new link http://www39.zippyshare.com/v/UphAeXOO/file.html
With all files for d802. i used these for my phone!
Only run these tool, and smile
I was a complete idiot and accidentally deleted the internal storage on my G Pad 7.0 v410. I can still boot into TWRP. I've tried flashing stock and Skinny ROM. They are successful according to TWRP, but I cannot boot into anything besides TWRP.
All attempts to sideload in ADB have failed. All attempts to factory reset or wipe dalvik multiple times worked, but did not help. I am currently at a loss for what to do next.
Fixed finally!!!
this took me hours of searching plase hit thanks
1. if you dont have adb setup adb you can get a minimal adb here
https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
install it, navigate to program files (Or if your on a 64bit system program files(x86)
Right click and click "Open command window here"
plug in your device if it isnt already pluged in, and type the following commands pressing ENTER after each line
DO NOT COPY PASTE THE WHOLE THING EACH LINE MUST BE PRESSED ENTERED separately
adb shell
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
exit
adb reboot
Your phone should boot into your rom now
laxfan91 said:
I was a complete idiot and accidentally deleted the internal storage on my G Pad 7.0 v410. I can still boot into TWRP. I've tried flashing stock and Skinny ROM. They are successful according to TWRP, but I cannot boot into anything besides TWRP.
All attempts to sideload in ADB have failed. All attempts to factory reset or wipe dalvik multiple times worked, but did not help. I am currently at a loss for what to do next.
Click to expand...
Click to collapse
I will try this when I have a chance. Thanks for your help!
laxfan91 said:
I will try this when I have a chance. Thanks for your help!
Click to expand...
Click to collapse
I tried this but it didn't work. I tried adb sideload and directly used the commands in twrp's terminal command.
Worked like a charm
This saved me! I am not sure what I did wrong but this did the trick. Thanks a million for sharing!!!!
Holy crap i love you!!! My tablet decided it wanted to do a system update while i was sleeping after i told it not to. Long story short the commands worked!! and i have a working device now!
Thank you
thank you
thank you
Boot : Error Certification Verify
Hi. I am new to this thread although i had used this thread many times with issues i have had. There is this one issue im having that i can't seem to figure out which im usually good at doing by following forums or threads.
A couple weeks ago i had rooted my LG G Pad 7.0 V410 LTE tablet from AT&T. I had TWRP downloaded into it and i had flashed Candy5 it worked perfectly i just didn't like how it looked so i tryed to flash it back to original stock OS. But now when i boot my tablet up it goes to the LG screen and at the top left it says Boot : Error Certification Error. This has me dumbfounded on what i should do. when i connect the tablet to the computer nothing pops up no tablet connects to the computer. I tryed downloading the drivers and everything but nothing seemed to work. I need help with this issue please!!
I didn't know where else to post this issue due to being new!!!
This worked for me, THANK YOU, however, I thought I would try to flash the LG Lollipop update to the device, it downloads, but when I go to install it, it reboots straight back into TWRP. How can I replace TWRP with the factory recovery and unroot the damn thing??
IlNobody- said:
Hi. I am new to this thread although i had used this thread many times with issues i have had. There is this one issue im having that i can't seem to figure out which im usually good at doing by following forums or threads.
A couple weeks ago i had rooted my LG G Pad 7.0 V410 LTE tablet from AT&T. I had TWRP downloaded into it and i had flashed Candy5 it worked perfectly i just didn't like how it looked so i tryed to flash it back to original stock OS. But now when i boot my tablet up it goes to the LG screen and at the top left it says Boot : Error Certification Error. This has me dumbfounded on what i should do. when i connect the tablet to the computer nothing pops up no tablet connects to the computer. I tryed downloading the drivers and everything but nothing seemed to work. I need help with this issue please!!
I didn't know where else to post this issue due to being new!!!
Click to expand...
Click to collapse
jgro1976 said:
This worked for me, THANK YOU, however, I thought I would try to flash the LG Lollipop update to the device, it downloads, but when I go to install it, it reboots straight back into TWRP. How can I replace TWRP with the factory recovery and unroot the damn thing??
Click to expand...
Click to collapse
As a general rule, when you can't access recovery, or you need to go back to stock etc etc you have to go into DOWNLOAD MODE and use an official or unofficial tool to go back to stock. It will remove twrp root etc etc but at least you'll have a working device and you can start rooting again.
This is a guide for the 8.3 but it should work on yours.
To put your device in download mode turn it off, press and keep pressing vol+, then connect the cable. If the official tool isn't working, you can use lgflashtool 2014 and follow this guide (the only difference should be that the official tool download the factory image from the internet while the unofficial one let you use an already downloaded one. If you use the unofficial version, be sure to download the CORRECT firmware for your tablet. I don't know if at&t require a special version, look it up.
Having read this thread and trying everything here plus other things, I still have a bricked LG V410.
I'm using Linux. Doing lsusb shows the device, but thats about as far as it goes.
from lsusb: Bus 001 Device 012: ID 1004:61f1 LG Electronics, Inc.
from adb devices: List of devices attached
from mtp-detect: libmtp version: 1.1.8
Listing raw device(s)
Device 0 (VID=1004 and PID=61f1) is a LG Electronics Inc. Android phone (ID1).
Found 1 device(s):
LG Electronics Inc.: Android phone (ID1) (1004:61f1) @ bus 1, dev 12
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
OK.
So, it appears as though Linux can see the device, but that's about it. Interestingly, if I put the device into Download mode (holding down the Up Vol while plugging in the USB cable), Linux will not see the device.
I can also put it into Factory Reset mode using the combination of keys, but that just get it stuck at Factory Resetting on the screen. I've even left it like that overnight and it's still sitting like that the next day.
I'm open to any ideas you folks may have.
I have to backtrack a tad. Putting the device in Download mode, Linux DOES see the device in lsusb.
Bus 001 Device 013: ID 1004:633e LG Electronics, Inc.
and MTP-detect:
libmtp version: 1.1.8
Listing raw device(s)
Device 0 (VID=1004 and PID=633e) is UNKNOWN.
Please report this VID/PID and the device model to the libmtp development team
Found 1 device(s):
1004:633e @ bus 1, dev 13
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0
OK.
Nothing showing in adb-detect.
dmesg shows:
usb 1-2: new high-speed USB device number 13 using ehci-pci
[25853.613194] usb 1-2: New USB device found, idVendor=1004, idProduct=633e
[25853.613211] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[25853.613222] usb 1-2: Product: LGE Android Phone
[25853.613232] usb 1-2: Manufacturer: LG Electronics Inc.
[25853.613241] usb 1-2: SerialNumber: LGV410c72bceb9
Thank you so much!! Worked like a charm!
I can only boot to cyanogen recovery on my LG V410. But when I try to use adb for your fix, adb devices shows unauthorised. How can I get around that?
Helppp!!!
My lg g pad 7 LG-LK430 is soft brick,
when i turn it on it get stuck sprint spark boot screen but i can go into download mode ,recovery and i dont have a custom recovery
can u help me what i can do all the stuff i found is missing files like the the lg flash tool but i dont have the kdz file and i dont know how to use fastboot or adb
mychal86 said:
my lg g gpad 7 LG-LK430 is soft brick from this i try to do all of it when i turn it on it get stuck sprint spark boot screen and i can go into download mode and recovery but i dont have a custom recovery can u help me what i can do all the stuff i found is missing stuff the the lg flash tool but i dont have the kdz file and i dont know how to use fastboot
Click to expand...
Click to collapse
I'm not trying to be a pain but when you use all lowercase *and* no punctuation it makes it really hard to read.
roirraW "edor" ehT said:
I'm not trying to be a pain but when you use all lowercase *and* no punctuation it makes it really hard to read.
Click to expand...
Click to collapse
hey look at it again i changed it
mychal86 said:
hey look at it again i changed it
Click to expand...
Click to collapse
I have a VK810 otherwise I'd help, sometimes I can help with other variants depending on the issue - someone else will have to answer.
Thank you forever!!
Ive been trying to figure this out forever. My 5 y/o son thanks you too!
hi, i brick my v410, and i was able to enter download mode so, i use lg flashtool and flash this kdz v41007h_0.kdz the ATT test kdz, all god but i lost internal memory, only have 4 gb avaliable, any idea?
lineu94 said:
hi, i brick my v410, and i was able to enter download mode so, i use lg flashtool and flash this kdz v41007h_0.kdz the ATT test kdz, all god but i lost internal memory, only have 4 gb avaliable, any idea?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3232150
Sent from my Atari 2600
Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
3skanurag said:
Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
Click to expand...
Click to collapse
yes it is soft brick. i face same problem. but make sure your pc has successfuly installed adb drivers.
if drivers are not working so you will see waiting for device.
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
3skanurag said:
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
Click to expand...
Click to collapse
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
ashish_zarekar said:
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
Click to expand...
Click to collapse
i tried the method you mentioned following this guide
http://www.thetechnotriad.com/326/ho...oot-yu-yureka/
the phone is working good the only major problem whatsapp is not opening...when clicked opens for 0.01 sec and returns back to previous screen (flashes) ....please somebody help me with this. Thanks in Advance.
Good day all,
I've had my LG for a year almost working perfectly on stock OS. suddenly one morning it was battery drained and ever since wouldn't start up.
my LG boots and gets stuck on
ERROR : boot certification verify
[1040] ---------------------------------------
[1050]
[1050] secure booting Error!
[1050] cause : boot certification verify
[1050]
[1050]----------------------------------------
then it turns off alone...
i have tried getting it into download mode it gives me same error, have also tried a full hard reset(vol- power lg logo vol- power) it goes and starts with the android robot and loading then just goes off.
However i download the LG drivers and after i try turning on the phone normally it goes off all i did was keep holding the volume up button then plugged into PC(win7) i get a removable disk of 63.9mb with two folders init(image and verinfo), in device manager it is COM15 LGE AndroidNet USB Serial Port. please keep in mind the screen is blank off when all this shows on PC.
I'm basically out of options idk what to do, please help me i have searched all over the web and cant find anything valid .
Any help would be appreciated.
Anyone help me (
anhtuan1992s said:
Good day all,
I've had my LG for a year almost working perfectly on stock OS. suddenly one morning it was battery drained and ever since wouldn't start up.
my LG boots and gets stuck on
ERROR : boot certification verify
[1040] ---------------------------------------
[1050]
[1050] secure booting Error!
[1050] cause : boot certification verify
[1050]
[1050]----------------------------------------
then it turns off alone...
i have tried getting it into download mode it gives me same error, have also tried a full hard reset(vol- power lg logo vol- power) it goes and starts with the android robot and loading then just goes off.
However i download the LG drivers and after i try turning on the phone normally it goes off all i did was keep holding the volume up button then plugged into PC(win7) i get a removable disk of 63.9mb with two folders init(image and verinfo), in device manager it is COM15 LGE AndroidNet USB Serial Port. please keep in mind the screen is blank off when all this shows on PC.
I'm basically out of options idk what to do, please help me i have searched all over the web and cant find anything valid .
Any help would be appreciated.
Click to expand...
Click to collapse
Pls help me
Hi guy,
I had a similar problem on weekend. I tried lot of methods and I fixed my phone. I don't have download mode yet, but i did my phone boot to system properly.
I don't know exactly what I did, my on forums of LG G3 a man posted 2 lines of comand that you can write on ADB. I think that these commands fixed my problem. But I tried lot of methods, so i can't say with conviction.
I will look on my historic on browser and put here all links that I researched.
Ben Flanders said:
Hi guy,
I had a similar problem on weekend. I tried lot of methods and I fixed my phone. I don't have download mode yet, but i did my phone boot to system properly.
I don't know exactly what I did, my on forums of LG G3 a man posted 2 lines of comand that you can write on ADB. I think that these commands fixed my problem. But I tried lot of methods, so i can't say with conviction.
I will look on my historic on browser and put here all links that I researched.
Click to expand...
Click to collapse
would you like to send my the link (
Sorry for delay
http://forum.xda-developers.com/showthread.php?t=2451696&page=47
thks a lot
Ben Flanders said:
Sorry for delay
http://forum.xda-developers.com/showthread.php?t=2451696&page=47
Click to expand...
Click to collapse
hi man i have the same problem but i have D290N
My phone is connected to comuter and detecting as "qualcomm mmc storage usb device"
with 63,9mb storage
(like a friend that started this thread)
My problem is that when i type adb shell
in adb
it says "error: no devices/emulators found"
any ideas :crying:
atiPL said:
hi man i have the same problem but i have D290N
My phone is connected to comuter and detecting as "qualcomm mmc storage usb device"
with 63,9mb storage
(like a friend that started this thread)
My problem is that when i type adb shell
in adb
it says "error: no devices/emulators found"
any ideas :crying:
Click to expand...
Click to collapse
Hi guy, in my researches I saw a thread about a problem that when cellphone is connected in the computer, computer recognizes only as qualcomm.
I don't remember exactly how to fix it, but take a look in the forums, i'm sure that you'll find a solution
sorry for don't help you
Help!
phone (lg295) is not included.
connecting see it as qualcomm 9800.
It does not respond to anything. I tried to restore it from the next topic - but there is only a way for the 290 ....
what to do...?
Any help (
anhtuan1992s said:
Any help (
Click to expand...
Click to collapse
See what i wrote above. There is a thread about this issue.