Related
Hi everyone
This is how to unlock and install TWRP (root too) the Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed.
Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on :
B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk
Links Bellow.
1/Unlock Bootloader
First you need the flash tool : Here (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When everything is ready...enable Usb debugging on your phone
Connect the device to your pc via usb and run the tool.
---Select option 1 (so insert 1 and press enter) to install the new fastboot partition, which is able to unlock your device if you install an unsigned kernel / recovery.
---Select option 2 if you haven’t enabled usb debugging, or if you have previously flashed an unsigned partition and now your device isn’t booting.
---Select option 3 to flash a custom kernel you have previously renamed to boot.img and put on your desktop. Do NOT use dd dumps : which means do NOT use boot.img you can find in flashable rom zips.
---Select option 4 to flash a custom recovery you have previously renamed to recovery.img and put on your desktop. Do NOT use dd dumps neither here.
---Select option 5 to check if bootloader is locked, unlocked or relocked.
Congratulation...your phone is unlocked !
2/INSTALL TWRP AND ROOT
TWRP Recovery : Gdrive
Alternative TWRP Recovery : Gdrive ( Use Ctrl + S) to download and keep them in the same folder
Now after unlocking the bootloader close the unlocktool and reboot the phone in fastboot mode
After that :
1/ IF you used the first link recovery Rename the file to recovery.img ...put it on the same folder and use the unlocking tool to flash it
2/ IF you used the 2nd link (Alternative recovery) you can just run flash.bat and it will do the work
after installing recovery :
go to wipe menu...then advanced and wipe only dalvik cache
now reboot
if your phone is rooted choose do NOT root and reboot
if yours is not rooted :
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :https://huaweiascendg615.wordpress.com/
How to use chineese recovery for non chineese :Here
NOTE : I NO LONGER USE THE U9508 !
I've Bought a Samsung A5 A500FU
Credits :
TWRP team
Batty86 for his amazing tool and roms that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
Hit :good: if i helped you
hello and thanks, do you have the file for bootloader unlock?? link is down
mimminou said:
Hello all xda devs and rookies
Today im showing you how to root and install TWRP 2.0.6.0 (Bootloader unlock too) on Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed...
-(Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on : B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk.
1/Unlock Bootloader
First you need the flash tool....Link Here (Link in first post) (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When every thing is ready...enable Usb debugging on your phone
Power off your phone; unplug the battery and replug it and boot up your phone in fastboot mode (power button + volum down)
Plug your phone in your computer and run flash.exe
choose 1 for chineese
choose 2 for english
Now choose unlock phone
after that choose fasboot option
Wait ~7 seconds and the phone will reboot
Congratulation...your phone is unlocked
2/INSTALL TWRP AND ROOT
Now after unlocking the bootloader you need to close flash.exe and reboot again your phone in fastboot mode
After that...open flash.exe and choose install TWRP V3 RECOVERY
NOTE : Do NOT choose Twrp touch version because its a little buggy and unstable (experimental users only)
now after the phone reboots...close the tool and reboot the phone in recovery mode using power + Volum up
go to wipe menu...then advanced and wipe only dalvik cache
now reboot to system....the recovery will notice that the phone is not rooted...
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
Credits :
GenoKolar for his amazing tool and recovery and unlock script
TWRP team
EternityProject team for sharing this tool
Batty86 for his rom that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :here
How to use chineese recovery for non chineese :Here
#sorry for bad english....im using my phone
Hit :good: if i helped you
Click to expand...
Click to collapse
got a new link for the flash tool? thhanks
hello bro flash toool link not working
This Thread is discontinued so i decided to update the unlocking methode one more time
New Root Method...For Lava Pixel V1
Requirements:- ATTACHED
1 - Adb Drivers.
2- SuperSU
3- TWRP recovery
4- USB Debugging Enabled..OK NOW FOLLOW ME
Steps:-
STEP 1
Installing Drivers :-
Turn ON USB Debugging Mode under Setting>>Developer options
Open AdbInstaller.zip And Extract it (Download 3rd Attachment)
Open AdbInstaller.exe
Connect ur phone And Install Drivers
STEP 2:-
Unlocking Bootloader:
1. Go To About Phone, Click Build Number 5-7 Times
2. Developer's Options Will be Activated
3. Then There Will Be OEM Unlocking Option
4. Enable That...
SO FOLLOW THIS STEP 3....
Go To Folder In Which You Have Downloaded Attachements which are given below
Go To File Option & Select Open Command Prompt > Open Command Prompt As ADMIN ( As Given In 1st photo attachment)
After You Opened Command Prompt
First type, adb devices ( TO SEE WHETHER YOU DEVICE IS CONNECTED OR NOT) (As Given In 2nd Photo attachment) (And Make sure your device is listed.)
STEP 4..Next type: adb reboot bootloader (As Given In 3rd Photo Attachment)
Wait for the phone to reboot in bootloader mode
STEP 5...Now your phone will boot in fastboot mode.
Once the phone in fastboot mode, type the following command to flash the recovery:- fastboot flash recovery recovery.img
Hit enter, and this will flash the recovery on your phone.
Disconnect Your Phone & Remove Battery, Insert It Again. Hold Volume Down & Power key To Boot In Recovery
STEP 6... Now you have to root your phone. So, In TWRP recovery, (Keep SuperSU.zip in root folder of SD card)
Go To Install
Navigate to SuperSU v2.65.zip & Click On It..
Swipe To Install.
After Installing, Reboot System..
Voila, that’s it! You now have rooted marshmallow...congrats!
CREDITS:- [MENTION=4728443]Me (Aaryan Pednekar) FOR THIS TUTORIAL
HIT THANKS FOR MY WORK....
POSTED HOW INSTALL XPOSED IN OUR LAVA PIXEL V1 :- http://forum.xda-developers.com/lava-pixel-v1/general/xposed-installed-successfully-t3314135
I ALSO PORT ROMS SO GIVE FLASHABLE ZIPS OF LOLLIPOP AND MARSHMALLOW STOCK ROM
Bro can you please port cyanogenmod 12.1 or 13 for this pixel v1...im waiting for a bug free custom rom for a long time :'(
Plz give me flashable zips of lollipop & marshmallow stock roms
As soon as possible
Bro i have lollipop stock rom
flashed it via sp flash tool....i m on lollipip 5.1
sourav4ganguly said:
Bro i have lollipop stock rom
flashed it via sp flash tool....i m on lollipip 5.1
Click to expand...
Click to collapse
update to marshmallow via ota then follow this steps
Bro how to lock the bootloader..
As i have a unlocked boot loader i lost the ota updates
---------- Post added at 12:25 PM ---------- Previous post was at 12:19 PM ----------
Bro i have a unlocked boot loader so lost all ota updates
Can u say how to lock bootloader?
Relock bootloader but be carefully...
sourav4ganguly said:
Bro how to lock the bootloader..
As i have a unlocked boot loader i lost the ota updates
---------- Post added at 12:25 PM ---------- Previous post was at 12:19 PM ----------
Bro i have a unlocked boot loader so lost all ota updates
Can u say how to lock bootloader?
Click to expand...
Click to collapse
There is a relock option simply click that....but carefully backup your phone...if something happens..flash stock rom using sp flash tool...(it can also brick your phone)
stock recovery
Can you please provide me stock recovery for lava pixel v1 as I have received updates from ota and I want to install updates from stock recovery I have now twrp recovery
Bro i think i also got the marshmallow zip file
sourav4ganguly said:
Bro i think i also got the marshmallow zip file
Click to expand...
Click to collapse
Upload on Google drive & both versions..
Bro i have the link of the thread u download it....this one is of 6.0 marshmallow
http://forum.xda-developers.com/lava-pixel-v1/general/direct-link-marshmallow-ota-update-t3267591
sourav4ganguly said:
Bro i have the link of the thread u download it....this one is of 6.0 marshmallow
http://forum.xda-developers.com/lava-pixel-v1/general/direct-link-marshmallow-ota-update-t3267591
Click to expand...
Click to collapse
But give me lollipop flashable zip not marshmallow as i cant port with marshmallow
aaryan45 said:
But give me lollipop flashable zip not marshmallow as i cant port with marshmallow
Click to expand...
Click to collapse
Bro u can get the lollipop flashable zip from androidmtk.com
Search for lava pixel v1...u will get thttp://firmwarefile.com/lava-pixel-v1
Link is here...download anyone file
sourav4ganguly said:
Bro u can get the lollipop flashable zip from androidmtk.com
Search for lava pixel v1...u will get thttp://firmwarefile.com/lava-pixel-v1
Link is here...download anyone file
Click to expand...
Click to collapse
it is not flashable via stock recovery... i want zips which flashable via recovery
In that case i cant help bro...i dnt have that flashable zip
aaryan45 said:
ROOTED MARSHMALLOW SUCCESSFULLY!!!
Requirements:- ATTACHED
1 - Android one Toolkit.
2- SuperSU
3- TWRP recovery
4- USB Debugging Enabled..OK NOW FOLLOW ME
Steps:-
STEP 1
Installing Drivers :-
Turn ON USB Debugging Mode under Setting>>Developer options
Open Android ONE Toolkit
Click on Install Drivers Button(1st Photo attachment)(SKIP IF INSTALLED)
After That, Click List Devices button, your device will be listed
STEP 2:-
Unlocking Bootloader:
**Unlocking bootloader will Wipe/format Userdata**
Click on List device just to make sure your device is properly connected to adb. (Make sure your device is listed.)
Click on Unlock Button (2nd Photo attachment), wait for device to boot in fastboot mode. Wait And your screen will be booted to unlock bootloader?
Press Volume UP key on your on phone to confirm Unlocking. IT WILL FORMAT YOUR INTERNAL DATA!!!
Phone will be reboot and may take 3-5 mins to Boot. (YOUR INTERNAL DATA WILL BE FORMATTED)
NOTE:-ANDROID ONE TOOLKIT FLASHES RECOVERY FOR OTHER ANDROID ONE DEVICES...IT DOESN'T SUPPORTS LAVA PIXEL V1 (in terms of flashing recovery and rooting)
SO FOLLOW THIS STEP 3....
Go To Folder In Which You Have Downloaded Attachements which are given below
Go To File Option & Select Open Command Prompt > Open Command Prompt As ADMIN ( As Given In 3rd photo attachment)
After You Opened Command Prompt
First type, adb devices ( TO SEE WHETHER YOU DEVICE IS CONNECTED OR NOT) (As Given In 4th Photo attachment) (And Make sure your device is listed.)
STEP 4..Next type: adb reboot bootloader (As Given In 5th Photo Attachment)
Wait for the phone to reboot in bootloader mode
STEP 5...Now your phone will boot in fastboot mode.
Once the phone in fastboot mode, type the following command to flash the recovery:- fastboot flash recovery recovery.img
Hit enter, and this will flash the recovery on your phone.
Disconnect Your Phone & Remove Battery, Insert It Again. Hold Volume Down & Power key To Boot In Recovery
STEP 6... Now you have to root your phone. So, In TWRP recovery, (Keep SuperSU.zip in root folder of SD card)
Go To Install
Navigate to SuperSU v2.65.zip & Click On It..
Swipe To Install.
After Installing, Reboot System..
Voila, that’s it! You now have rooted marshmallow...congrats!
CREDITS:- @anil293 for this awesome tool & Me (Aaryan Pednekar) FOR THIS TUTORIAL
HIT THANKS FOR MY WORK....
POSTED HOW INSTALL XPOSED IN OUR LAVA PIXEL V1 :- http://forum.xda-developers.com/lava-pixel-v1/general/xposed-installed-successfully-t3314135
I ALSO PORT ROMS SO GIVE FLASHABLE ZIPS OF LOLLIPOP AND MARSHMALLOW STOCK ROM
Click to expand...
Click to collapse
Any one interested in Lava Pixel V1 whatsapp group
http://forum.xda-developers.com/lava-pixel-v1/general/whatapp-lava-pixel-v1-developers-t3328438
Aaryan bhai mera phone root nhii ho rha lava pixel v1 marshmallow plzz help me plzz give me your contact no ... Plzz
Sent from my PixelV1 using XDA-Developers mobile app
ganghacker92 said:
Aaryan bhai mera phone root nhii ho rha lava pixel v1 marshmallow plzz help me plzz give me your contact no ... Plzz
Sent from my PixelV1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Join Our WhatsApp Group
Tried several times rooting Lava Pixel V1 Marshamllow but cant flash twrp. Pls suggest steps for rooting the device.
Hi,
i tried to flash the marshmallow update and accidently erased all the data using twrp. now my mobile is showing no os in twrp and it is not booting.
1. tried to unlock bootloader using fastboot. failed.
2. tried to flash custom rom . failed because bootloader not unlocked.
now i am having only twrp. can anyone help me in this , its really urgent.
thanks.
Do u have any custom rom for pixel v1?
i cant find any custom rom
hi i searched all over the internet but i cant find any custom rom. Can anyone pls give me the link for any custom rom for lava pixel v1.
Thanks
flash the stock firmware with sp flash tool
s015,s019 are for white model & s103 is for gold model .
http://firmwarefile.com/lava-pixel-v1
flashtool not detecting my mobile
AC DC said:
flash the stock firmware with sp flash tool
s015,s019 are for white model & s103 is for gold model .
http://firmwarefile.com/lava-pixel-v1
Click to expand...
Click to collapse
sp flashtool is not detecting my device and in sp flashtool the download is not starting. but fastboot can detect my device.
Importatn: my device has no OS, and my bootloader is locked.
pmkscorpio said:
sp flashtool is not detecting my device and in sp flashtool the download is not starting. but fastboot can detect my device.
Importatn: my device has no OS, and my bootloader is locked.
Click to expand...
Click to collapse
but if you have twrp you can directly install the zip from sdcard
thread link
AC DC said:
but if you have twrp you can directly install the zip from sdcard ,check this thread
Click to expand...
Click to collapse
where is the thread link?
pmkscorpio said:
where is the thread link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/lav...-to-upgrade-to-marshmallow-bypassing-t3315319
Issue
AC DC said:
http://forum.xda-developers.com/lav...-to-upgrade-to-marshmallow-bypassing-t3315319
Click to expand...
Click to collapse
I used SP tool to flash the firmware (Link given by @AC_DC in another thread).
When I select the option 'firmware upgrade' it says error proinfo: Failed to get PMT info. The it says 'select option to format and download'. After doing that, after the 'download OK' popup, I try to boot up the phone and nothing. It isn't booting up. (white variant of pixel v1)
My phone is literally dead, only the preloader is working. I also tried formatting and then trying it again, but nothing works.
Please direct me to what I should do now. Any help highly appreciated :good:
First search in google unlock bootloader
Hello your problem is solve.....?
This method is legit and works 100%
Hey all
U said that u still have TWRP. So go to recovery, clear data, and in clear system partitions, select everything and clear.
Then follow the following steps -
1) Turn off yr V1 and get it into fastboot mode and connect it to yr PC( make sure u've adb installed. Link - https://androiddatahost.com/bnjkh)
2) download : https://firmwarefile.com/lava-pixel-v1. Place the 'boot' and 'system' files from the downloaded firmware to the folder where u have adb installed.
3) Open CMD( A .exe called 'cmd here' is already present in the file of adb, so run it as administrator)
4) Type -
Code:
fastboot flash boot boot.img
. Give it some time.
5) Type -
Code:
fastboot flash system system.img
. Give it time (It takes 4-5mins, so dont panic)
6) Type -
Code:
fastboot reboot
THIS METHOD WORKED FOR ME MANY TIMES.
If it helped you, click the :good: thanks button
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09
Reserved
Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?
@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...
I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok
Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.
Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp
@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??
@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.
matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please
@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon
hi
plz help
i flash stock recovery and my phone go to rescue mode
help
I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).
@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it
Hi,
I'm all new to rooting and I got a major issue.
Here's the story.
Wanting that substratum themes, I looked up for rooting my devices
I followed this guide to unlock the bootloader, and all was fine.
Next, I followed this one for rooting, but at the "installing nexus drivers" step, my PC wasn't showing off any driver setup or something related to a driver.
I pressed Enter, despite the fact that I didn't know if I had nexus drivers properly installed, and my phone didn't want to boot up. Stuck on the boot animation, for more than 20 hours.
Next day, I came back and found this mega thread about unbricking. I followed it, and now I'm in a boot loop: my phone reboot 1-2 secs after showing the home screen, but I can still enter in fast boot mode. My phone is still unlocked and when I enter Huawei's eRecovery (by long-pressing up volume button) to try to "Download new version and recovery" it connects to my Wi-Fi, then fails.
Thanks for your patience,
Mx3_
Do I understand correctly? Do you wont root your phone ?
1 st. With method which presented, you can only root your device if you have Android 5 or lower, if you have android 6 Marshalow - you must use " Systemless ROOT"
2nd. You must upload new ROM on your device ( i have special tool for do this "srktoolHuawei" - this is a special tool for flashing every new rom on a huawei device )
3.rd." HuaweiUpdateExtractor" - this is a tool for extract new ROM ( roms for huawei, you can find in huawei webside ) - download rom for your device, extract by this tool, copy and paste inside folder of "srktoolHuawei"
Next...
Plug you device to PC by usb, go to recovery mode and if you have unblocked bootloader, should be writen:" Phone is unlocked" - > Open "srktoolHuawei", go to Command Prop and then:
- IMPORTANT !!! - you must upload files: SYSTEM, RECOVERY, CUST, BOOT - you can do this using that commands:
1. fastboot flash system system.img
2.fastboot flash boot boot.img
3.fastboot flash recovery recovery.img
4.fastboot flash cust cust.img
Reboot and system should starts correctly...
---------- Post added at 08:02 PM ---------- Previous post was at 07:39 PM ----------
If you wont to root your device with SYSTEMLESSROOT method, you should do like that:
1. If you upload recovery by "srktoolHuawei" - > download TWRP recovery and upload into your device ( copy and paste TWRP img. file into this tool folder insted of traditional android recovery file, next change name from TWRP, to just recovery.img and upload using command: fastboot flash recovery recovery.img )
2. Now - if you press volume + - and power together, you should have TWRP Recovery insted of Huawei Recovery, thats good...
3. Next...BETA-SuperSU-v2.62-3 - upload this version of supersu into your SD card...
4. Next - go to TWRP mod, next to advanced, next to Terminal Command and write command like this:
echo SYSTEMLESS=true>>/data/.supersu
Confirm this command and back to install ( this command means that you will install SuperSU and it will make systemless root for you )
When if you have install, then select supersu which you downloaded before and now simply flash it by TWRP, next reboot and you should installed supersu and rooted device...
I successfully rooted, thanks ! but now i installed a substratum theme (pixel ui), uninstalled some huawei apps and rebooted to apply effects, and i'm stuck again in a bootloop ! tried wipe cache with TWRP, but didn't work :/
Mx3_ said:
I successfully rooted, thanks ! but now i installed a substratum theme (pixel ui), uninstalled some huawei apps and rebooted to apply effects, and i'm stuck again in a bootloop ! tried wipe cache with TWRP, but didn't work :/
Click to expand...
Click to collapse
Please tell me you made a back up in TWRP if you did just use the RESTORE option in TWRP if not you will have to go through the above again to get back to stock but missing out flashing the recovery partition as yours is working.
When your phone boots make a back up in TWRP before trying out anything so its easy to recover
BaronDeLucifer said:
1. If you upload recovery by "srktoolHuawei"
Click to expand...
Click to collapse
Hello @BaronDeLucifer,
what do you mean with this? Do I need the srktool for rooting my P8 Lite?
With best regards