Related
Hi Guys.
Does anyone know if it is possible to root the P8 Max.
Thanks in advance.
I am also interested in this
+1
Not yet
I saw some guy posting in his blog on howto root p8 max
http://blog.livedoor.jp/cn221283/archives/51190024.html
Can somebody help to translate this, using google map doesnt help hehe..
dodzs said:
I saw some guy posting in his blog on howto root p8 max
http://blog.livedoor.jp/cn221283/archives/51190024.html
Can somebody help to translate this, using google map doesnt help hehe..
Click to expand...
Click to collapse
* i meant google translate
dodzs said:
* i meant google translate
Click to expand...
Click to collapse
The method only applies to P8 and the author says it might not be applicable to Max as the recovery is P8.
However, just for the record
1. Unlock the bootloader
http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
2. Fastbboot custom recovery *Need to create a TWRP recovery for the P8 Max
3. Root
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
4. Profit!
Leechoonhwee said:
The method only applies to P8 and the author says it might not be applicable to Max as the recovery is P8.
However, just for the record
1. Unlock the bootloader
http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
2. Fastbboot custom recovery *Need to create a TWRP recovery for the P8 Max
3. Root
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
4. Profit!
Click to expand...
Click to collapse
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
dodzs said:
Managed to root my phone.. even when I have updated the EMUI to B018, but there was an issue.. I tell you below
Step I follow from Chinese Forum below...
Preparation step :
1. download the tools from
https://www.mediafire.com/?9drsdo2f6hn4j34
2. Extract the content to your local. Note there are two folders :
- Folder 1 is for the tool that contains the TWRP recovery.img and the adb/fastboot tool,
- Folder 2 is for the original recovery
3. Copy the SuperSU zip to your phone (either in internal or external memory of your phone)
Installation step :
Step 0, unlock your bootloader (search around on how to do it)
1. Since I am using mac, somehow I don't need to install any driver, but if you using windows, install all the driver yourself
2. Enable the developer mode in your phone, and after that enable the usb debugging
3. Turn off your phone, and boot to fastboot (in off mode, connect the phone with your PC then press Volume Up and Power Button together)
4. Since now your phone has been connected to the PC, go to that Tool folder in respective of your OS, then overwrite the recovery with TWRP with fastboot command (install custom recovery) *note : for mac just add "./" in every command
- check the whether its connected : fastboot devices
- install TWRP : fastboot flash recovery recovery.img
5. Restart your phone and boot to recovery
- restart : fastboot reboot
- after reboot, turn off your phone
- reboot to recovery : turn on your phone by holding Volume Down with Power button
- Now you are at TWRP
6. Install SuperSU (root)
- Install SuperSU zip that has already been copied to your phone using TWRP (use the Install mode)
7. Reboot the phone
- Use reboot function in twrp
8. Profit
Theoritically the above things works but I have some issues following the above :
- After step 4, after recovery being flashed with TWRP seems like my phone Boot Partition is being overwritten too
- So when I rebooted the phone, it boot to TWRP instead
- So I tried to re-flashed the recovery with the original EMUI rom recovery (go to the folder "2.P8Max_Official_Recovery(For_restoration)" to find the original recovery.img). Also note that in the this folder, the adb and fastboot is only for mac. The one for windows use it in the tools
- This is done by going to fastboot again, then do command : fastboot flash recovery recovery.img
- This time using the original recovery
- Now when I rebooted the phone, it goes to EMUI recovery, then I just clicked restart to system or something
- After this, everything fixed, and I have SuperSU install and phone rooted
You can follow the above, but do it at your own risk, I am not responsible if your phone brick hehehe..
Original chinese forum is here : http://cn.club.vmall.com/thread-4919441-1-1.html
Click to expand...
Click to collapse
So you mean that you can't enter system wile twrp is flashed??weard
rowihel2012 said:
So you mean that you can't enter system wile twrp is flashed??weard
Click to expand...
Click to collapse
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
ok we just have to wait for twrp recovery worknig well with max
is the speaker really good?do you like it?
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
Instead of flashing the recovery to the phone you can just boot it one time. Just use fastboot boot recovery.img instead. This will load twrp and not flash it.
Sent from my C6806_GPe using Tapatalk
rowihel2012 said:
ok we just have to wait for twrp recovery worknig well with max
is the speaker really good?do you like it?
Click to expand...
Click to collapse
Speaker is damn good... but when playing games or watching movie, it is covered by the hand... so it would be better if the speaker is front facing..
otherwise it's good... but I do hate EMUI though... its making the experience sluggish...
Im try to unlock my p8max, when using Huawei unlock site dont allow unclock because log in by email account, they requested register with phone number, but im not in listed countries for receive a confirmation code by phone.
Who have registered Huawei account by phone please share,
Thanks
quynh2v said:
Im try to unlock my p8max, when using Huawei unlock site dont allow unclock because log in by email account, they requested register with phone number, but im not in listed countries for receive a confirmation code by phone.
Who have registered Huawei account by phone please share,
Thanks
Click to expand...
Click to collapse
Send an email to [email protected], with this in the mail :
Hello Huawei,
I would like to request the bootloader unlock code for my Huawei <phone version>
IMEI : xxxxxxxxxxxxxx
S/N : xxxxxxxxxxxxxxx
Product-ID : xxxxxxxxxxx
Regards, xxxxxxxxxxxxx
Click to expand...
Click to collapse
dodzs said:
Yap.. like i said, seems like the boot partition is overwritten with twrp.. so i got sort of twrp bootloop.... but after i reflash the original recovery.img using fastboot... then launch the recovery and click boot to system or sumthin.. everything back to normal...
weird... but i am no expert here... just lucky enough to not brick the phone
Click to expand...
Click to collapse
the stock recovery located in folder is chines how can we make it english?
rowihel2012 said:
the stock recovery located in folder is chines how can we make it english?
Click to expand...
Click to collapse
The stock recovery when it's launched, it's in English, dun worry I have re-flashed it as I mentioned in the prev post..
Anyway the stock recovery is extracted from the current available ROM for P8 Max, which is in chinese. There is no international ROM available yet for this phone.
dodzs said:
The stock recovery when it's launched, it's in English, dun worry I have re-flashed it as I mentioned in the prev post..
Anyway the stock recovery is extracted from the current available ROM for P8 Max, which is in chinese. There is no international ROM available yet for this phone.
Click to expand...
Click to collapse
so did you find working twrp recovery? i managed to flash it and install root and boot only one time
i could not boot so system again so i flashed the stock
is this a hoax?
http://www.guruswizard.com/2015/06/how-to-root-huawei-p8-max.html
BTW, I can't get fastboot working on my PC. When I put the phone in fastboot mode, my pc cant detect the device.
Root Huawei P8 Max 5.1.1
hi,
So, what is the real WORKING procedure to root our Huawei P8 Max with android version 5.1.1 ?
Thank you in advance for answering.
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09
Reserved
Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?
@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...
I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok
Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.
Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp
@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??
@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.
matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please
@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon
hi
plz help
i flash stock recovery and my phone go to rescue mode
help
I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).
@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it
******************Root Recovery Doogee X5 max pro*******************
Your waiting Time IS Now Finished Here is Complete Guide to Root Doogee X5 Max Pro install twrp And More,
Hit :good:
ADB & Fastboot
Before doing most things mentioned below you will need "adb" and "fastboot" installed. Two of your options are to install the Android SDK Tools or the Minimal ADB and Fastboot tool. If you are somewhat new to this I highly recommend the second one. Go here, download the latest version (1.3.1 as of this writing), and install it. When setup is complete you should have an icon for the Minimal ADB and Fastboot tool.
Note: I highly recommend you add "C:\Program Files (x86)\Minimal ADB and Fastboot" to your PATH variable in Windows. This way you can open a Command Prompt anywhere and use adb or fastboot.
1) Unlock Bootloader
Power on the phone and skip through all of the setup options
Go to Settings -> About device
Tap Build number five times to enable Developer options
Go to Settings -> Developer options
Enable OEM unlocking
Enable USB debugging
Plug the phone in to your PC and authorize it
Open a Command Prompt
Type adb reboot-bootloader
The phone should reboot and in a very tiny font at the bottom you should see => FASTBOOT mode
Type fastboot devices to verify that your PC sees it correctly
Type fastboot oem unlock
Press Volume Up to say Yes and wait for this to finish
Type fastboot getvar all and look for (bootloader) unlocked: yes
Type fastboot reboot
You should see your phone reboot a couple times as it erases the phone
Install twrp-
Power on the phone
You can configure your phone now or just skip through all of the setup options and do that later
Go to Settings -> About device
Tap Build number five times to enable Developer options
Go to Settings -> Developer options
Enable OEM unlocking
Enable USB debugging
Plug the phone in to your PC and authorize it
Open a Command Prompt to wherever you extracted the .img file
Type adb reboot-bootloader
The phone should reboot and in a very tiny font at the bottom you should see => FASTBOOT mode
Type fastboot devices to verify that your PC sees it correctly, rename twrp to recovery.img
type fastboot flash recovery recovery.img to flash recovery
Type fastboot reboot
Rooting-
Download BETA-SuperSU.zip and save it to the phone's internal memory or an inserted microSD card
Plug the phone in to your PC
Open a Command Prompt
Type adb reboot recovery
You should now be in twrp. Go to Install zip, find SuperSU.zip, and install it
When it finishes go to Go Back -> Reboot Phone -> No
Once the phone boots up launch SuperSU and configure it as you like
Other Solutions-
i have doogee x5 max-s (i geuss limited editon in algeria ) with mtk6735 . i do evrything and all steps but when i reboot to recovery mode i have ( no command ) in the screen .... how to fix that ? sorry for my ****ty english XD
I had the same Issue but i have found a solution!
After you have flashed the twrp recovery, dont reboot the phone! the "recovery.sh" will replace the twrp on every boot!
Just pull off the battery after flashing, disconnect usb and put the battery back in to the phone.
Now get in to the recovery by pressing volume up and power button together until the select bootmode menue appears.
select recovery with the volume up button and enter with the volume down button.
and now you should be in the twrp main menue.
i hope it works for you too!
greetz from the lizard
It does not work from step 12, all the drives are correctly installed and windows recognizes the cell, the recovery image is in the internal memory and also in the sd but of the error "can not load Recovery.img". I tried all the tutorials on the net to do root and nothing worked.The flash does not recognize to pass the recovery also the installed drivers because windows recognizes the cell phone.
pitro1 said:
It does not work from step 12, all the drives are correctly installed and windows recognizes the cell, the recovery image is in the internal memory and also in the sd but of the error "can not load Recovery.img". I tried all the tutorials on the net to do root and nothing worked.The flash does not recognize to pass the recovery also the installed drivers because windows recognizes the cell phone.
Click to expand...
Click to collapse
use sp flash tools to flash recovery, scatter also added with twrp
Flash does not pass the file in the download only option, the process does not start. I reinstalled ROM by firmware mode all ok, but the process of passing recovery on command 12 and 13 of the error message. I manually copied the recovery to the sd and internal memory but also from the error. Does not find the file speaks that it is not a command found.
pitro1 said:
It does not work from step 12, "can not load Recovery.img".
Click to expand...
Click to collapse
Don't use Capital R's
fastboot flash Recovery Recovery.img
Code:
fastboot flash recovery recovery.img
Doogee X5 Max Pro - Update 01/16/2017 + TWRP-3-0-2 & SuperSU-v2.79
Working root for Update 01/16/2017
Title: Doogee X5 Max Pro
Listed: 01/19/2017 11:21 pm
ROM Version: ROM Android 6.0
Doogee X5 Max Pro - Update 01/16/2017
TWRP-3-0-2 + SuperSU-v2.79
Use This Version Flashtool
SP_Flash_Tool_v5.1620.00.000
XN Logos said:
use sp flash tools to flash recovery, scatter also added with twrp
Click to expand...
Click to collapse
Until today I could not do root on x5 max pro. In the method below even downloading the twrp when starting with the power + volume down button start with a menu in Chinese and if you start with volume up + power goes in the default recovery mode.
Same as Pitro1 I am on 16.01 update and I cannot install twrp no matter what I try.
I tried x32 and x64. I tried rebooting directly on recovery or first load system and then adb reboot recovery. I tried to format all first (now I lost my Imei and so on lol). I downgraded and updated again. Downgrading works only with 26.12 version. All others are giving me Colorado lines on the screen and nothing else...
OEM unlock, file transfer, adb, fastboot, drivers detection, are all working good. Only I cannot install twrp...
Also I cannot write nvram nor with SN Writer 2.1504 nor with Imei & SN Writer 1.7.2, MetaAP mode fails all the time...
I'm just about to send it back...
How i rooted my Doogee X5 Max Pro
How i rooted my Doogee X5 Max Pro
- Unlock Bootloader tutorial in the first post By XN Logos.
- Updated ROM to Android 6 with SP FLASH TOOLS V.5.16.20
- boot phone for 1st start and activate Developer and USB debugging
- Installed TWRP-32x + SuperSu with SP FLASH TOOLS V.5.16.20
i returned the phone as i had no imei anymore.
i got a new one, i did not put any sim or whatsoever, i just unlocked bootloader, and updated to 16.01 version
then i tried to install twrp via fastboot and it did not work, i did it with sp flash tools as advised and removing the battery prior (don't forget to!). it worked !
Stripe_nl said:
How i rooted my Doogee X5 Max Pro
- Unlock Bootloader tutorial in the first post By XN Logos.
- Updated ROM to Android 6 with SP FLASH TOOLS V.5.16.20
- boot phone for 1st start and activate Developer and USB debugging
- Installed TWRP-32x + SuperSu with SP FLASH TOOLS V.5.16.20
Click to expand...
Click to collapse
How old is your phone and what build version was it at before you started? Because this doesn't work on mine. Which of the "Android 6" ROMs did you flash to start with as I've tried flashing mine back to an earlier one in case it's something with the later stuff that my phone has come with but they either don't make a difference or they won't even boot.
I tried the method in the first post here and the phone wouldn't even boot (switch on and you get the Doogee logo in silver for a few seconds then it reboots and does the same again). I had to flash the stock ROM from NeedROM to get it working again.
I've tried flashing TWRPx32 and x64 available NeedROM both with SPFlash tools and with ADB. Generally flashing it with ADB from the command line leaves the phone in that boot-loop. If I flash it with SPFlash when you try to boot into Bootloader afterwards you get the Doogee logo in silver for a few seconds then it seems to reboot again on it's own and boot normally - you don't even get the menu to choose Fastboot, Recovery or Normal. From then on trying to boot to the Bootloader gives you the menu but choosing Recovery gives you the standard recovery.
It's almost as if something is overwriting the recovery partition with the original after I flash TWRP onto it.
Anyone got any suggestions about where I might be going wrong or a way around whatever additional security they might have put in there?
Hi. I have tried to root my x5 max pro with flash tools to load TWRP, but it always restarts normally and the TWRP does not come out. I found you and I started to try this method to load the TWRP. Does everything good, unload bootloader and load recovery, but loading the TWRP gives me error .:
Device unauthorized.
This adb's $ ADB_VENDOR_KEYS is nor set; Try adb kil-server if that seems wrong
what I do?
rooting X5 Max pro in Ubuntu 16.04
Hi all, this is my first china phone and I basically bought it only to experiment, I'm a linux power user but this is the first time I 'play' with an android OS.
thanks to multiple guides and posts on this and other forums I'm getting somewhere and learning a lot about how to manage an android OS, I'm sharing a bit of info I unovered about doing this under ubuntu but I'm also stuck and in need of guidance, please help me.
Linux specific issues:
I'm running ubuntu 16.04 LTS, installed fastboot and adb tools from ubuntu repos, with these tools and no other modification to my system I could follow the tutorial on how to unlock the OEM bootloader with adb and fastboot.
accordingly to this post about SP flash tool in linux you might need to blacklist a modem manager module in order for SP flash tool to connect to the phone, you also need to install usb development tools (package libusb-dev) and check through dmesg that your linux OS can actually properly read mediatek usb devices.
After following the above mentioned instructions (both the linux sp flash tool tutorial and the bootloader unlocking howto) I could get SP flash tool linux (multiple version) to see the phone after you connect it while SP flash is downloading the new recovery image and flash it with an ok message.
If you get stuck with a BROM error 1013 remember to start sp flash tool with root privileges.
Phone specific issues:
I can get SP flash tool to flash my phone recovery with an ok message confirmation but the phone keeps rebooting with doogee recovery and not twrp. I'm on the newest stock ROM update (20170116) as of current post date. I've been using 32 bit TWRP images from multiple sources and linux version 5.1620 of spflash tool from their website
so my questions are as following:
1) after reading other posts I think I might have to play with different versions of SP flash tool and TWRP until I get the right combination, I think I might be using 64bit spflash tool for linux to flash a 32bit rom or something like that, can anybody confirm precise version number of the stock rom, TWRP and SP flash tool that worked out for you?
2) should I try to install the whole stock ROM posted in this chinadevices thread before trying to flash only TWRP recovery? please also check the linked thread for multiple custom ROM being ported to this phone, please also note that the full stock rom this poster uploaded (it's in the "all firmware" link) contains another flashing tools with chinese instruction called MultiDownloadTool.
www.china-devices.com/forum/index.php?threads/doogee-x5-max-pro-mt6737-custom-roms.20527/
3) I don't have access to a windows installation right now, but I do have a Win10 VM under Vmware workstation 12 pro, so I could try windows version of sp flash tool, do you guys think that USB passthrough would work?
ibrooks said:
How old is your phone and what build version was it at before you started? Because this doesn't work on mine. Which of the "Android 6" ROMs did you flash to start with as I've tried flashing mine back to an earlier one in case it's something with the later stuff that my phone has come with but they either don't make a difference or they won't even boot.
I tried the method in the first post here and the phone wouldn't even boot (switch on and you get the Doogee logo in silver for a few seconds then it reboots and does the same again). I had to flash the stock ROM from NeedROM to get it working again.
I've tried flashing TWRPx32 and x64 available NeedROM both with SPFlash tools and with ADB. Generally flashing it with ADB from the command line leaves the phone in that boot-loop. If I flash it with SPFlash when you try to boot into Bootloader afterwards you get the Doogee logo in silver for a few seconds then it seems to reboot again on it's own and boot normally - you don't even get the menu to choose Fastboot, Recovery or Normal. From then on trying to boot to the Bootloader gives you the menu but choosing Recovery gives you the standard recovery.
It's almost as if something is overwriting the recovery partition with the original after I flash TWRP onto it.
Anyone got any suggestions about where I might be going wrong or a way around whatever additional security they might have put in there?
Click to expand...
Click to collapse
Same here. May a work around would be finding out the oem commands in fastboot. I have seen a tutorial to get them, but you have to be root: https://www.xda-developers.com/how-to-discover-hidden-fastboot-commands/
I search a simple method
Why all so complicate? I am searching for a simple way to root.
For my old Doogee X5, I discovered just
update-ROOT-DOOGEE_X5.zip
Copy the zip to the micro-SD-card
Settings -> Phone info -> Update -> menu "update local" -> choose zip from micro-SD-card.
Start update.
That's all!
Now I search for such a simple solution for my new Doogee X5 MAX pro.
I do not want any methods with "volume down power", because my X5 MAX pro has the menus after "Volume down power" start in Chinese language.
Recovery TWRP x32
http://www.needrom.com/download/twrp-x32-rom/
http://www.needrom.com/category/doogee/serial-x-doogee/x5-max-pro/
This version finally works ! Thank you
Neaw said:
Recovery TWRP x32
http://www.needrom.com/download/twrp-x32-rom/
http://www.needrom.com/category/doogee/serial-x-doogee/x5-max-pro/
Click to expand...
Click to collapse
Hi there,
I just tried the first file you posted, (twrp-x32-rom), and this one works for me after all previous attempts to boot up TWRP failed. Thanks for the link !
What I had tried before:
I have a relatively new X5 Max Pro, which I ordered a week ago. I updated the firmware to the newest version (20170116) using the OTA update function.
Then I tried to flash TWRP using the files from "needrom.com" which seem to have worked on older versions of the phone/firmware, but did not work for the newer versions.
I tried 32bit and 64bit TWRP versions and flashed them with SP flash tool, but when pressing Vol+/Power the phone would not boot into TWRP recovery. Insted, when selecting "Recovery" from the boot menu, the phone would show the Doogee logo in silver, then blink once, then boot up normally. When repeating this process, then phone boots into Stock recovery, indicating that the TWRP I flashed was replaced by stock recovery.
However, I just flashed the recovery.img from "TWRP LATEST" (the first file posted by Neaw) with SP flash tools and was finally able to boot into TWRP. I installed the superSU-zip 2.79 included in the link, and I am now rooted. Once again, thanks for posting this :good:
Greetz, Ollek74
Doogee X5 MAX! SERIUS PROBLEM......
Hello Guys i have a serious problem with my phone.....i have Malware on it and i cant uninstall it or anything alse.....the worst thing is that my phone not responding in any connection except that charging.....i can't have access on my storage cause this is not allowed or gives the choice! i tried everything but nothing nor the usb debugging or anything else please give me your help!!!!
hello, for first thing i need say sorry for my english, because it isn't good. (now i using google translate for write this problem)
My model is ALE-L21 in B585, I had run all the instructions to root. they are:
1)unlock the bootloader with the code.
2)download the recovery TWRP for p8 lite, adb tools and supersu.zip
3)reboot phone to fastboot,and run the adb.exe with cmd.exe, after run the code adb devices for controll if device is connected.
4)ricalled recovery TWRP in 1.img and copy it in adb tools' folder.
5)flash recovery with code fastboot flash recovery 1.img.
6)reboot the devices in recovery twrp for istall supersu.zip saved in sd card.
my problem is in 6), when i went to recovery, After 5-45 seconds the device will restart automatically, even if I do not do anything. At this time I can still get into the system.
If fortunately succeeded in installing supersu.zip, during the reboot I remain in huawei's logo.
i need to reflash the stock firmware to save it.
I would like to have this problem compared to others, help me, thank you.
Qmy1997 said:
hello, for first thing i need say sorry for my english, because it isn't good. (now i using google translate for write this problem)
My model is ALE-L21 in B585, I had run all the instructions to root. they are:
1)unlock the bootloader with the code.
2)download the recovery TWRP for p8 lite, adb tools and supersu.zip
3)reboot phone to fastboot,and run the adb.exe with cmd.exe, after run the code adb devices for controll if device is connected.
4)ricalled recovery TWRP in 1.img and copy it in adb tools' folder.
5)flash recovery with code fastboot flash recovery 1.img.
6)reboot the devices in recovery twrp for istall supersu.zip saved in sd card.
my problem is in 6), when i went to recovery, After 5-45 seconds the device will restart automatically, even if I do not do anything. At this time I can still get into the system.
If fortunately succeeded in installing supersu.zip, during the reboot I remain in huawei's logo.
i need to reflash the stock firmware to save it.
I would like to have this problem compared to others, help me, thank you.
Click to expand...
Click to collapse
Flash Magisk v13.3 (all instructions and files here -> https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and you're ready to go
Sonofapo said:
Flash Magisk v13.3 (all instructions and files here -> https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and you're ready to go
Click to expand...
Click to collapse
thank you for moment
Sonofapo said:
Flash Magisk v13.3 (all instructions and files here -> https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and you're ready to go
Click to expand...
Click to collapse
thank you, very much. i had rooted my p8 lite with succesed. But the application always starts automatically, even if it is blocked with rom toolbox lite.
Nubia Red Magic 5G and 5S Roms and Root support Thread
Second post for TWRP and Magisk installation. Mirror for all roms and tools at end of post
Latest Official Rom updates
Android 11
US/Asia - V8.70 Nubia Link MD%: will update soon
EU - V7.70 Nubia Link MD5: will update soon
China - V9.50 Nubia Link MD5: 361AC13CA52AB83C239783FBAB088CEA
Android 10
US/Asia - V8.12 Nubia Link MD5: 6e930fc2431b3daeae2d94145926a6c1
EU - V7.15 Nubia Link MD5: bb9e3153716851e87f196ae6b4f44a2e
China - V6.23 Nubia Link MD5: BD447840ACA4D48F9443B94D2EAD890F
Change Log - 8.70 / 7.70 Android 11
- Security Patch October 2022
- Game Space enhancements
- Game space Gyro sensitivity menu
- game space touch sample rate improvement
- Fixed: corner of screen non-touchable in some cases
- Fixed: issue where game would fail to close
- Fixed: location of caller display
-Fixed: screen tearing when using 144hz
-
Bugs -
in Testing
- Always on display notification not showing
- memory leak in nubia launcher (requires forced close often to stop phone from lagging)
- small window mode for telegram and discord have wrong zoom/ aspect levels.
_____________________________________________________________________________________________________________
UNBRICK TOOL for 5S - Courtesy of @johnny886
Use this tool, with directions on the thread to restore your device to USA/Asia 8.07
you can then install TWRP and after flash any region rom after creating a somewhat universal unbrick tool for those in different regions.
Follow directions on the thread. but here is a link to the Thread. A Mirror for the tool is in my Personal Mirror at the bottom of this thread post.
Link to Thread
Confirmed working with 5G devices - but its recommended to update as soon as you unbrick.
_____________________________________________________________________________________________________________
For unlocked bootloader
Fix your fingerprint sensor.
here Link
--------------------------------
Update Instructions.
Note
for Android 11 do not flash through TWRP you will softbrick.
____________________________________________________________________
For Stock devices without root
- disable security. No pin, no face unlock, no finger print, no pattern. remove all security.
-download zip file
-go to system update tap three dots and select local update
-Navigate to update.zip and select.
-your phone will reboot and install new rom
- you phone will reboot once more and you will be greeted with your lock screen
- setup Phone with security options as before flash.
For devices with "LOCKED bootloader" Root / TWRP (not tested on A11)
- take backup of vbmeta and recovery partitions in TWRP
- change the name of both files to vbmeta.img and recovery.img
(VBmeta is often 64kb big and Recovery is often 90+mb big.)
- copy and paste these new img files into the update zip.
- flash through TWRP
- go back to main menu, select advanced, then select option
"disable replace TWRP" to keep TWRP as your recovery.
for devices with "Unlocked bootloader" (not tested on A11)
-make full backup
-download zip
-install zip through TWRP
-reboot
__________________________________________________________________________________
Custom Roms and Kernels
Kernel
Mattofthedead's Redmagic 5S kernel for LOS and Stock roms LINK
Roms
Rom Builder Ra's Custom Roms - Please post any bugs or issues in the related threads.
Pixel Experience Plus
Ressurection Remix
NOTE : to boot any Custom rom on the 5S device. Flash the Rom following the directions. then flash Matts LOS kernel Version 3
__________________________________________________________________________________
------------------------------
Old roms
Android 11
V8.65 Nubia Link MD5: 3d52e18c66366d3d23744184425d3926
V8.64 Nubia Link MD5: a7e61f5e2f7c377a6850cf6ac3a62aa7
V7.65 Nubia Link MD5: 746dad5b6145dfba1108355095a6ad46
V7.64 Nubia Link MD5: 55371ee8e5728aee2bc7df5b3a7d6585
V9.42 Nubia Link MD5: D492B92DD83B366508CDD74DE7D152A3
V9.40 Nubia Link MD5: D28F26289A9B75F771EF4F623F0BB367
V8.57 Nubia Link MD5: 266819d4b09c2c52aadb39e948dc84bc
V8.59 Nubia Link MD5: d7e32b7a3e833adc57fcf734aa47f5a3
V7.57 Nubia Link MD5: 81ee71869f660a28b631d871ffb59524
V7.60 Nubia Link MD5:
V9.26 Nubia Link MD5: 8997375CD97D8F7F261F21121FC8EFAA
Android 10
v6.18 Link MD5: 9AC5EA5F64835C1995E4A81D4973FB71
V6.13 Link MD5: F38ED2D7CB58252D308B29D1D4517DB9
V7.07 Link MD5: ffc3fdaf4afc522aa3a084d9275f2cb6
V7.14 Link MD5: 0f879160fbf8b556de5303207b93d0d1
V8.07 Link MD5: b30dab221be73292c5da7884afc0363f
V8.11 Link MD5: 85d9366a3017112cb68d66041e725ce6
________________________________________________________
Personal Mirror - Located in Eastern Canada
________________________________________________________
TWRP and root guide for 5S and 5G on Android 10 only - (these steps will NOT unlock your bootloader) - these steps use a bypass method to install a recovery without unlocking bootloader. the command below is to allow flashing of partitions. bootloader status is still locked during and after process is complete.
Note. if you already have ADB and fastboot drivers installed, this folder will work as is. if not I put an installer in the folder too to install a mini adb fastboot setup. which needs windows driver signing turned off (windows 8-10) this can be done by going to advanced startup and choosing to boot without driver signing.
1. Download zip file found at the end of this post
2. Extract to root of C: drive
3. open CMD prompt with admin privileges
4. CD to the ADB folder you extracted. (CD = Change Directory)
5. Connect your device in Fastboot mode (power off. hold volume down +Power until it vibrates. then release power but continue to hold volume down)
6. Once in fastboot mode, with cable connected to the computer run these commands
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable replace TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Reboot to system for the first time and complete the initial setup. this is to create the user space partitions data/media ( preferably do not make a pin or pattern at this stage)
13. once in the rom, connect to PC and copy over the Magisk zip to the internal memory. then reboot holding Volume up
14. once back into TWRP (if you created a pin during setup TWRP will ask you for your pin to access data) go into install and flash the Magisk.zip you moved in step 13 then reboot. once back into the rom, you will see a Magisk app, tap it and allow to update, the APK will install latest version of the manager.
More NOTES.
this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
its also recommended to have an update.zip of your current rom (which you can download from the post above), incase you need to reinstall the rom after flashing the new recovery or VBmeta.
OEM unlocking in the developer options is NOT needed. since you are not unlocking your bootloader. this step can be ignored.
I'll update this tutorial with newer steps if needed.
Thanks to those that created all these great tools.
@wzsx150 - for their version of TWRP
John Wu - for Magisk
@mslezak vbmeta_skip
If i've helped you root your device, please hit thanks.
Link ADBmini - zip updated with Magisk 21.4 zip
MD5 for ADBfastbootmini.zip: 0ad97a9ae1539b26ef78c849b169e807
I'm working on a process that will update to Android 11, through TWRP and root, without losing data. Much like a stock update.
I will update the thread once my tests are complete.
Hello. I can not flash (i cant even copy) the zip via TWRP. I see the storage device on my windows laptop. I have wipe data cache and dalvik, but it does not copy it and i can not restore my device. Help will be appreciated
josehdx said:
Hello. I can not flash (i cant even copy) the zip via TWRP. I see the storage device on my windows laptop. I have wipe data cache and dalvik, but it does not copy it and i can not restore my device. Help will be appreciated
Click to expand...
Click to collapse
Try putting update zip on a USB key and connect via OTG and flash this way. Moving files with TWRP for some reason corrupts or does not complete transfer.
Make sure to factory reset. If you're coming from a used update, backup your data partition and wipe everything. Then check to see if the partition is in fact empty. ( I noticed sometime my data partition did not erase)
Patrick Morgan said:
Try putting update zip on a USB key and connect via OTG and flash this way. Moving files with TWRP for some reason corrupts or does not complete transfer.
Make sure to factory reset. If you're coming from a used update, backup your data partition and wipe everything. Then check to see if the partition is in fact empty. ( I noticed sometime my data partition did not erase)
Click to expand...
Click to collapse
Thanks
Working fine after full data partition wipe.
I have an additioal question regarding further updates, and i would not want to open a new topic. so, after flashing the zip, i "lost" TWRP but i already have root access. I wonder if is possible to flash upcoming updates with the default recovery built in on the phone, if not, i would assume i need to install TWRP again.in any case, will side loading update make any problem with the current system? i hope my question and context is clear
As these are official ROMs, they will replace the recovery and remove root from the phone.
If you do not have root, flashing these zips from the system menu local update should work. But if you have root or TWRP it's better to flash through TWRP.
You could just flash TWRP again after flash, but I personally modify the zip and add the recovery to it to save me going into fastboot after each update.
Is it possible to install the US rom on a device with EU rom?
in the EU version I can't set the frame rate to 144 hz.
Darkvenum79 said:
Is it possible to install the US rom on a device with EU rom?
in the EU version I can't set the frame rate to 144 hz.
Click to expand...
Click to collapse
I've spoken with another EU rom user, that has the same issue before. it seems it was an error in the stock rom.
reinstalling 7.07 from the links above should fix your problem.
both 7.07 (the EU rom) and 8.07 (the US rom) are exactly the same. the only difference is the languages from what I can tell.
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
josehdx said:
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
Click to expand...
Click to collapse
No it wont.
There is a specific step by step that is required to get it functioning again. And it only survives until your next full wipe, which i assume you will do more often flashing non official roms.
I can grab the steps and edit this post for you.
Edit -
Prep.
have a black / very dark brown leather. (belt, wallet, etc)
a soft gel plaster / Bandaid
(something skin textured and in a pink / light beige colour) texture and colour are important.
First step is clear data in the infingerprint app in app info and remove permissionfor data memory - (you need to show system apps to find it)
- digit in call phone code:
*#9959#
(android 11 use Activity launcher (playstore) to enter fingerprint menu)
- uncheck performance checkbox , check only calibration checkbox
Steps -
1. Press start then wait.
2.Press next and with plaster / bandaid press on circle
3.Press next and use wallet / belt ( the display becomes black for black calibration)
4.Press next and use gel plaster / bandaid again but pinch it in so only the part with your finger touches the circle.
If you are lucky see success alert in green color
In system app in setting In-Display-Fingerprint allow access to data memory then reboot device.
Enjoy your Finger Print once more!
P.S. = do this procedure in a very dark room to improve the chances of it succeeding.
Thanks to qtr1st (Salem) and mikekrunk (Mike) for the steps and information.
josehdx said:
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
Click to expand...
Click to collapse
esy re-lock bootloader fingrperint work fine without calibration
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
Patrick Morgan said:
TWRP and root guide for 5S - (these steps will NOT unlock your bootloader) - these steps use a bypass method to install a recovery without unlocking bootloader. the command below is to allow flashing of partitions. bootloader status is still locked after process is complete.
Pretty short step by step to get twrp and Magisk if you want, on your phone. (Red Magic 5S)
Note. if you already have ADB and fastboot drivers installed, this folder will work as is. if not I put a installer in the folder too to install a mini adb fastboot setup. which needs windows driver signing turned off (windows 8-10) this can be done by going to advanced startup and choosing to boot without driver signing.
1. Download zip file attached or mirrored
2. Extract to root of C: drive
3. open CMD prompt with admin privileges
4. CD to the ADB folder you extracted.
5. Connect your device in Fastboot mode (power off. hold volume down +Power until it vibrates. then release power but continue to hold volume down)
6. Once in fastboot mode, with cable connected to the computer run these commands
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable overwrite TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Magisk zips files are in the folder. copy to device and flash through twrp. and install the apk after boot. done twrp and root.
More NOTES.
this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
its also recommended to have a update.zip of your current rom (which you can download from the post above), incase you need to reinstall the rom after flashing the new recovery or VBmeta.
OEM unlocking in the developer options is NOT needed. since you are not unlocking your bootloader. this step can be ignored.
I'll update this tutorial with newer steps if needed.
Thanks to those that created all these great tools.
@wzsx150 - for their version of TWRP
John Wu - for Magisk
@mslezak vbmeta_skip
If i've helped you root your device, please hit thanks.
Link ADBmini
MD5 for ADBfastbootmini.zip: e49f162080c6a2124c243716546ad710
Click to expand...
Click to collapse
where is the link of twrp.img
sansha1211 said:
where is the link of twrp.img
Click to expand...
Click to collapse
Patrick Morgan said:
Link ADBmini
MD5 for ADBfastbootmini.zip: e49f162080c6a2124c243716546ad710
Click to expand...
Click to collapse
that file called Link ADBmini has all you need
Is it ok to flash Eu rom to my NA/asia rom?
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Rai972 said:
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Click to expand...
Click to collapse
reboot to bootloader by... power off device -> press and hold volume down and power button until you see the logo -> connect device to your computer then do the steps 7 to 12
also once you are in TWRP make sure you ... this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable overwrite TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Magisk zips files are in the folder. copy to device and flash through twrp. and install the apk after boot. done twrp and root.
Rai972 said:
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Click to expand...
Click to collapse
if you have not removed your pin before flashing any of the roms. it asks you for YOUR own pin that you made when you setup the phone. so use your own pin.
the process of rooting your device, clears a security partition. (the VBmeta partiton)
this deletes the encryption you had on your phone. so the devices partitions are unaccessable and need to be wiped before you can boot to system.
you need to clear data. all data. then check in TWRP file browser if your data partition is clear. .. if you see folders with random letters its not been formatted correctly.
so, in the wipe menu on TWRP you should go into advanced and change the partition type to ext4 then back to f2fs to clear the partition of data.
once your phone is clear you should be able to wipe cache and davik then reboot to system for it to start like a factory reset.
sansha1211 said:
esy re-lock bootloader fingrperint work fine without calibration
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
where is the link of twrp.img
Click to expand...
Click to collapse
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
josehdx said:
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
Click to expand...
Click to collapse
adb devices
adb reboot bootloader
fastboot devices
fastboot flashing lock
josehdx said:
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
Click to expand...
Click to collapse
via cmd -- fastboot flashing lock
After i reboot in TWRP and disable replace TWRP, i install magisk from a USB otg, and then i wipe all data, then i reboot system but it keeps opening TWRP in every reboot, i had to install Stock Rom to have my phone back but without root, what im doing wrong?? thanks
Edit: now it worked, tried a few times and worked don't know what failed