Database Users

Need Firmware for Smartwatch A1 (MTK6261)

Hello, I have a smartwatch. Its codename is 'A1'. It's quite similar to GT-08. Just check at youtube, type 'smartwatch a1' and you'll know what I am talking about. Now I need its original firmware. I tried to use GT-08's firmware but it doesn't work. Does anyone here use this kind of smarwatch (A1)? Can you please help me? My watch uses MTK6261. Thank you

Same Problem
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다

andriraihanw said:
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
Click to expand...
Click to collapse
I have the same watch and I can help you if you explain to me how to backup my firmware

zdeni82 said:
I have the same watch and I can help you if you explain to me how to backup my firmware
Click to expand...
Click to collapse
there is the tutorial here
https://www.youtube.com/watch?v=0BIeY35AUaQ
wish that helpful
i have a lot of link smartwatch a1 firmware ,
but the problem , to download it i need to register to that russian forum
http://4pda.ru/forum/index.php?showtopic=713552&st=300
even Gtranslate can translate the page , but the verification method is really hard . hopefully russian people can have a mirror link.

andriraihanw said:
there is the tutorial here
wish that helpful
i have a lot of link smartwatch a1 firmware ,
but the problem , to download it i need to register to that russian forum
even Gtranslate can translate the page , but the verification method is really hard . hopefully russian people can have a mirror link.
Click to expand...
Click to collapse
I am registered there if you need login details I can give you

login details
zdeni82 said:
I am registered there if you need login details I can give you
Click to expand...
Click to collapse
Hi zdeni. Pls can u help me wh login details? I have a A1(MTK6261) smartwatch and need a frimware. Thankyou verry much.
can you help me pls ?

I have a A1(MTK6261) smartwatch...
andriraihanw said:
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
Click to expand...
Click to collapse
Hi zdeni. Pls can u help me wh login details? I have a A1(MTK6261) smartwatch and need a frimware. Thankyou verry much.

bobseptian said:
Hello, I have a smartwatch. Its codename is 'A1'. It's quite similar to GT-08. Just check at youtube, type 'smartwatch a1' and you'll know what I am talking about. Now I need its original firmware. I tried to use GT-08's firmware but it doesn't work. Does anyone here use this kind of smarwatch (A1)? Can you please help me? My watch uses MTK6261. Thank you
Click to expand...
Click to collapse
How can I upload the zip/rar/txt file?

Help me!!!
hd88alx said:
How can I upload the zip/rar/txt file?
Click to expand...
Click to collapse
I also have a clock A1 and flash FW GT08 I present it as the screen upside down I almost lost the ability to touch

huynh123 said:
I also have a clock A1 and flash FW GT08 I present it as the screen upside down I almost lost the ability to touch
Click to expand...
Click to collapse
Sand me data about it....ram ?...

Just receive my A1 watch
Just receive my A1 watch: *#8375#
Code:
LD991B_V5.7_BB_ZX_S1_CAM3a01_LX7789_9304_B_V1.2
[BRANCH]
11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD_TIME]
2017/01/12 14:28
[MRE VERSION] -
267014452
HAL_VERNO:

Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!

defdefred said:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
Click to expand...
Click to collapse
Here is the original firmware

zdeni82 said:
Here is the original firmware
Click to expand...
Click to collapse
Thank you very much zdeni82!
Unfortunately, the firmware is not compatible with my A1 clone
Screen is in the correct way, but the top is not usable neither the touch screen.
My watch is not the same clone as yours...

defdefred said:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
Click to expand...
Click to collapse
I tried "XDA DZ09_MT6261_32MB_NOR_2nd_ChrisTopf" and everything is working... except that the screen is flipped and so the touch
I wonder if turn the screen 180° inside the watch is possible...

Is there Anyone who need a firmware for A1? I have this watch and I can back it up.

ChorusCitrus said:
Is there Anyone who need a firmware for A1? I have this watch and I can back it up.
Click to expand...
Click to collapse
Me! me! me! me!

SP Flash Tool requires scatter file. What now?

ChorusCitrus said:
SP Flash Tool requires scatter file. What now?
Click to expand...
Click to collapse
If you watch is a 4MB/32MB RAM kind, you can take any scatter file from https://drive.google.com/drive/folders/0B_hRh3DjuBoeNl9tM3ZRc0pDeTQ
If you want to use the test RAM, don't make the same mistake I did = Most important is to uncheck the NOR test to avoid a complete lost of firmware So be careful.
The marvelous Golem explanation are here = https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272

Here you go guys!
Let me know if that works.
Link: uloz.to/!UIPSqTxjlhCn/a1-firmware-rar

SMA-R runs with firmware of Ulefone GW01 and NO.1 G3

Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.

Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you

Valerc said:
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Click to expand...
Click to collapse
unfortunately I do not have a backup of the SMA-R.
Of course the GW01 and NO.1 G3 firmware have the bluetooth function but only 4.0, while the SMA-R also has Bluetooth 3.0 that I think drain the battery slowly.
Happy Xmas

Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?

Emirio said:
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Click to expand...
Click to collapse
hello , it's happened to me too , i resolved only with turn on , let the battery drain to 0 , connect to pc , turn it on , press file manager , swiping the screen , go to setting and reset all the watch , it worked to me

Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.

Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!

Matuskaur said:
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Click to expand...
Click to collapse
You may need this tutorial.How to update MTK smartwatch

JKSurf said:
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Click to expand...
Click to collapse
Hi, i wait somebody who can save the sma r firmware.
I hope you can make it, because my is bricked.
Here is the step by step guide to make it.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
If it is working, please send the firmware here to this forum.
Many thanks!

I also have the SMA-R without its original frware, it happened the same to put the faces, and I had to put the No.1 G3 but it does not work well, it lowers very fast the capacity of the battery and besides it does not work The heart meter. If someone can pass the SMA-R firmware for the whole community? We would be very grateful to you
While waiting, can someone tell me where the gw01 ulefone firmware can be downloaded?
Update, is here in case anyone needs it:: Forum: xda-developers Smartwatches Misc Other SmartWatches Ulefone GW01 smartwatch Puesto # 53
Pd: I have requested by mail and by your facebook to SMA to send me the firmware, if they send it I would post it in this forum

Yesterday, after two days i received it, my SMA-R doesn't work anymore. The display is always black... Do you know if there's a way to fix it? Thanks

Install the uplink firmware qw1 that goes very well. Until someone puts sma firmware

Do you have a tutorial? I don't know how to do it

Sorry for not letting me put the link to the page, but follow this route and there you can find the firmware and manual
Update, is here in case anyone needs it::
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
--------Ulefone GW01 smartwatch Puesto(# 53
Manual
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
.............Ulefone GW01 runs with firmware of No.1 G3 by Tornator

Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again

alfhas said:
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
Click to expand...
Click to collapse
I know GW01 and G3, but what is SMA-R ? Will you brick your watch if you don't flash the firmware successfully.....Think about Pablo they recommended us not to flash other watch firmware, they might make your watch no longer work.

The sma-r is another smart watch just like g3vo gw1 ... all use similar hardware and firmware is compatible ... If you can repair or reset the clock when it is broken, you can always put another firmware and recover The clock even with different system of these three compatible.

Unfortunately I use a Mac so I can't use FlashTools, even using Virtualbox to emulate Windows... Do you know if there's some other software for mac? thanks

Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.

Original SMA-R Firmware
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...-benzóico.
---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------
newbiesk said:
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Click to expand...
Click to collapse
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...

Change software region?

Hi everyone
I just received my device from china and it took me long time to figure out the name of it. In the box the name is Huawei MLA-AL10
The problem is that the device is completely in Chinese
I managed to change the language to English thanks to translator of course
But i get stock with apps
I want to change the software region to any region rather than chinese, I searched here in this fourm but i couldn't find any help
Could you help me please how to change the region?
My device is 4GB of ram 64 Rom
Build number is mla-al10c00b159
Thanks

Any thoughts would help

Only suggestion would be root it and install open gapps.

I have a MLA-AL10C00. How can I change the region?

Different cust img flashed though bootloader I guess.?

i know its an old thread,
but i am writing for all those who are reading it till now
Lots of users contacted me after bricking devices in attempt to change region, so here is my message for all of you.
Guys don't change oeminfo on nova/nova plus, it will brick your network security
you are advised to consult phone specialist to change region of your phone.
its possible but it is complicated.
Good luck

Hi all nova's,
I found i think a good think to solve your problem with changing software and region.
Here a Tuto on youtube how to change them with a tool
" huawei multi-tool ".
To be clear, I haven't tested it ( on your own risk )
https://youtu.be/JyRCqO8BPgs

Warning this will brick your device, Huawei nova plus have Qualcomm chip and its different than kirin chip.
The only way is to get it done by some phone specialist.
https://www.google.com.pk/search?q=...ndroid-huawei&sourceid=chrome-mobile&ie=UTF-8
zaabolla said:
Hi all nova's,
I found i think a good think to solve your problem with changing software and region.
Here a Tuto on youtube how to change them with a tool
" huawei multi-tool ".
To be clear, I haven't tested it ( on your own risk )
https://youtu.be/JyRCqO8BPgs
Click to expand...
Click to collapse

V8 Smart Watch

Hi,
I need some assistance. Is it possible to update software or something I can do to change the style of this" V8 Smart Watch"?
It has a MTK6261D processor. I've seen the watch running different looking "skins" almost. So there must be a way?

figure anything out yet? i've got the same watch. bricked. touchscreen won't work.
need firmware.

i also need firmware friends

i'm need a framework too :crying:

V8 need room
i need too a firmware for the smartwatch v8 what have one button, please help me with that :crying::crying::crying: MY RELOJ is dead:crying::crying:

heres the firmware
HERE{https://drive.google.com/file/d/}+++++{19R-MSycdzK6f78ECaADXCQH9yx0F6Gx1/view}
it won't let me post links ....

gamingitup said:
here{https://drive.google.com/file/d/}+++++{19r-msycdzk6f78ecaadxcqh9yx0f6gx1/view}
it won't let me post links ....
Click to expand...
Click to collapse
links can not

My smartwatch v8 mt6261d I can not change wallpaper pls help me,in micro sd photos to 240 x240 but there is no option to import an image

@kos-greece Greetings friend here I have a firmware the only problem that I see is that the camera does not work.

V8 spd sc6531 file needed

Unlock and root huawei P9 lite

Hello
All aboard excuse my english because I use 'google translation'.
I would like to root my P9 lite. I would like to keep the datas at root if possible.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
I add that I made a request for code from Huawei. They must send it to me by email.
Thank you

toto6976 said:
Hello
All aboard excuse my english because I use 'google translation'.
I would like to root my P9 lite. I would like to keep the datas at root if possible.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
I add that I made a request for code from Huawei. They must send it to me by email.
Thank you
Click to expand...
Click to collapse
Hello dude,
keep the data is possible making opportune backups previously,
becouse of unlocking bootloader will factory reset your phone.
Those questions has been asked a ton of times so you will find many guides / tools,
just type in 'yellow box' "search thread" and you'll find what you're looking for...
Follow guides and use mind, ask for help in that thread, that's all....
You can also take a look at this thread...
Good luck :fingers-crossed:
Regards

Hi
I just looked at your link and thus the application 'dc unlocker'. It's not very clear to buy credits. Is any email address provided or the one used to create the mobile gmail account?

Hi,
I just watched this tutorial : https://www.youtube.com/watch?v=pR7McTBUw7w
Can you confirm that it's ok for me? I do not want to 'brick' my mobile.

@toto6976
hey, i was just looking that you replaced... next time use 'quote or @' when reply a post
otherwise cannot know when you answer
I never used dc unlocker, i don't think it will brick your phone, maybe it could help you unlock the bootloader,
but i can't confirm that...
If i were you i will look at @k1ll3r8e toolkit that can unlock BL, flash recovery, guide you root your phone....
all with a single toolkit..
You can also use fastboot, or do nothing, always will remain your choise, remember that...
All links you can find in previous post.
Read carefully the GUIDES
Good luck :fingers-crossed:

Dadditz said:
@toto6976
hey, i was just looking that you replaced... next time use 'quote or @' when reply a post
otherwise cannot know when you answer
I never used dc unlocker, i don't think it will brick your phone, maybe it could help you unlock the bootloader,
but i can't confirm that...
If i were you i will look at @k1ll3r8e toolkit that can unlock BL, flash recovery, guide you root your phone....
all with a single toolkit..
You can also use fastboot, or do nothing, always will remain your choise, remember that...
All links you can find in previous post.
Read carefully the GUIDES
Good luck :fingers-crossed:
Click to expand...
Click to collapse
Hi,
Thank you for the reply.
I also found this tutorial in Spanish. Easier for me What do you think ?
https://conexionlatam.blogspot.com/...howComment=1528362724703#c6186127662578266317
I looked for the toolkit, but I did not find it. By cons I found this post:
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
What is the name of the toolkit? I do not see what to download.
While browsing the lines, I do not see either 'oeminfo's & custom.bin's' corresponding to my mobile:
VNS-L31C432B412 EMUI: 5.0.1 Android 7.0 version.
I downloaded this :
https://forum.xda-developers.com/devdb/project/dl/?id=26164

toto6976 said:
Hi,
Thank you for the reply.
I also found this tutorial in Spanish. Easier for me What do you think ?
https://conexionlatam.blogspot.com/...howComment=1528362724703#c6186127662578266317
I looked for the toolkit, but I did not find it. By cons I found this post:
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
What is the name of the toolkit? I do not see what to download.
While browsing the lines, I do not see either 'oeminfo's & custom.bin's' corresponding to my mobile:
VNS-L31C432B412 EMUI: 5.0.1 Android 7.0 version.
I downloaded this :
https://forum.xda-developers.com/devdb/project/dl/?id=26164
Click to expand...
Click to collapse
Hi, if you think spanish is more easier then use that... ( i have not readed your link !!! )
but finally you finded the toolkit, by my side the best method....
oeminfo+custombin are present for your variant but you don't need them in order to root your phone,
those are used to de/rebrand or/and to convert from single to dual sim and vice versa...
As i already told you read carefully what's written in toolkit, do one thing at a time, use brain...
If your choice is the toolkit, do not forget to thank the developer ..
has made this available to all users .... thank you man :good:
Best regards

Dadditz said:
oeminfo+custombin are present for your variant but you don't need them in order to root your phone,
those are used to de/rebrand or/and to convert from single to dual sim and vice versa...
As i already told you read carefully what's written in toolkit, do one thing at a time, use brain
Click to expand...
Click to collapse
Hello
I will finally take the toolkit.
I have two small questions: I do not see my mobile in the screen tutorial 2. L31C432B412.
If there is no, can I stop the current process?

Dadditz said:
Hi, if you think spanish is more easier then use that... ( i have not readed your link !!! )
but finally you finded the toolkit, by my side the best method....
oeminfo+custombin are present for your variant but you don't need them in order to root your phone,
those are used to de/rebrand or/and to convert from single to dual sim and vice versa...
As i already told you read carefully what's written in toolkit, do one thing at a time, use brain...
If your choice is the toolkit, do not forget to thank the developer ..
has made this available to all users .... thank you man :good:
Best regards
Click to expand...
Click to collapse
Hi,
I watched the imaged tuto of k1ll3r8e. On the second image, there is a tab 'packages' with the list of 'devices'. It is in this list that I do not see mine (in fact the orange operator B412). I am not reassured at the idea of installing a package from another operator.
What do you think ?

My default files are missing
Hello dear fellows,
I am using a Huawei P9 Lite and recently I gave it to a repair shop for registration in Turkey. As I search on Internet, I know that my phone had to be rooted and its IMEI must have been changed. Now, I cannot see some default files like Files which shows the storages in my menu and also some of the icons in settings are missing. Actually, I cannot see my Huawei ID and cloud icon and also system update icon for updating my EMUI is no more there! I hope that you guys guide me what should I do now? Could it be fixed?

toto6976 said:
Hi,
I watched the imaged tuto of k1ll3r8e. On the second image, there is a tab 'packages' with the list of 'devices'. It is in this list that I do not see mine (in fact the orange operator B412). I am not reassured at the idea of installing a package from another operator.
What do you think ?
Click to expand...
Click to collapse
Hey dude,
you are writing a lot of crap, who ever talked about the packages you should need ??
B412 orange operator ??
You have a VENUS (VNS) phone (also called p9 lite (2016)) with EUROPEAN cust (C432) and latest dual sim FIRMWARE (B412).
Have you readed link i posted you ?? Surely not...
If you had read that link, you would have seen in my last post that there is a guide on how to root the phone using that toolkit..
My last piece of advice is ... GIVE UP !! .. (sorry if i wrote that)
Regards
phoemo said:
Hello dear fellows,
I am using a Huawei P9 Lite and recently I gave it to a repair shop for registration in Turkey. As I search on Internet, I know that my phone had to be rooted and its IMEI must have been changed. Now, I cannot see some default files like Files which shows the storages in my menu and also some of the icons in settings are missing. Actually, I cannot see my Huawei ID and cloud icon and also system update icon for updating my EMUI is no more there! I hope that you guys guide me what should I do now? Could it be fixed?
Click to expand...
Click to collapse
Hello,
you wrote in a wrong thread.
Look for how to rollback maybe using HWOTA or DLOAD method or look for UNIFIED HELP THREAD,
you should know what exactly is your variant/firmware (ex. VNS-L31C185B360)
Best regards

Sorry,
I am not such an expert in mobile stuff, but I am seeing that my phone's build number is NRD90M test-keys. I have no idea what it is! But someone told me that since your phone has been rooted, the operating system has been completely changed which you cannot also update your system and you have to go to one of the Huawei representatives for flashing your phone again and make the operating system as before. But then, your telecommunication registry will be deleted again. Would you please tell me what is these methods you named?! and will it be useful for bringing back my phone ?
---------- Post added at 08:43 PM ---------- Previous post was at 08:38 PM ----------
Dadditz said:
Hey dude,
you are writing a lot of crap, who ever talked about the packages you should need ??
B412 orange operator ??
You have a VENUS (VNS) phone (also called p9 lite (2016)) with EUROPEAN cust (C432) and latest dual sim FIRMWARE (B412).
Have you readed link i posted you ?? Surely not...
If you had read that link, you would have seen in my last post that there is a guide on how to root the phone using that toolkit..
My last piece of advice is ... GIVE UP !! .. (sorry if i wrote that)
Regards
Hello,
you wrote in a wrong thread.
Look for how to rollback maybe using HWOTA or DLOAD method or look for UNIFIED HELP THREAD,
you should know what exactly is your variant/firmware (ex. VNS-L31C185B360)
Best regards
Click to expand...
Click to collapse
Sorry,
I am not such an expert in mobile stuff, but I am seeing that my phone's build number is NRD90M test-keys. I have no idea what it is! But someone told me that since your phone has been rooted, the operating system has been completely changed which you cannot also update your system and you have to go to one of the Huawei representatives for flashing your phone again and make the operating system as before. But then, your telecommunication registry will be deleted again. Would you please tell me what is these methods you named?! and will it be useful for bringing back my phone?

Dadditz said:
Hey dude,
you are writing a lot of crap, who ever talked about the packages you should need ??
B412 orange operator ??
You have a VENUS (VNS) phone (also called p9 lite (2016)) with EUROPEAN cust (C432) and latest dual sim FIRMWARE (B412).
Have you readed link i posted you ?? Surely not...
If you had read that link, you would have seen in my last post that there is a guide on how to root the phone using that toolkit..
My last piece of advice is ... GIVE UP !! .. (sorry if i wrote that)
Click to expand...
Click to collapse
Hi, I installed 'adb', connected the mobile, enabled debug mode usb and oem.
I run the toolkit and it puts me 'no packages found'.

@phoemo
Hey man,
NRD90M test-key is an incomplete firmware, that's the reason you haven't all your apps...
Rooting phones won't change stock ROM, it must be intentionally done...
Look back at your phone and see what variant you have (L21 , L31 or other),
you should also know if your phone is single or dual sim.
Last thing, in setting look for EMUI version (ex 4.0.1/4.0.3/5.0, etc...)
Theorically linving in turkey you should have C185 CUST but i'm not really sure (it's for nord africa/middle east region),
maybe you had a branded version, but none exept you could know that !!
Now with those info go in UNIFIED HELP THREAD and request your help,
the more you will be precise in the phone info, the greater the possibility of being helped, and bring back to a full working device...
I cannot help you more dude, that's what i know about this stuff.
Wish you the best