Related
Hi,
I've just bought the w90 watch and try to flash it. I follow the steps for flash a mtk 6260a but I have some problem:
-first I have a empty backup folder so I can't replace it with the original one :-/
- when I flash the watch, I've sound, the watch vibrate, making a sound when i plug on the usb, with some firmware i've sound when i click the menu button, with other I can power off and have the sound too, the only problem is that I have a black screen with all the firmware I tested.
When I flash it, I've the green circle at the end (with 95% of the firmware i've tested).
I try to flash mine because I see on internet these watch with a better menu (more colorfull, background, more theme, more watch face).
I've spend my day searching how to fix my w90 watch.
And finally, i found the original firmware here: downloads.tinydeal.com/Tools_to_write_IMEI.rar (the firmware is in the archive with SN write tool)
I hope that'll help some people with this watch.
W90
Hello everybody,
I've just bought a W90 smartwatch and I've been waiting to receive it directly from China.
I've bought the W90 in order to change its firmware, thanks to its MTK6260A cpu, but I didn't undestand if I can or not with teh procedure found out in the Forum XDA.
Could anyone help me, please?
Thank you a lot.
ivan.fil said:
Hello everybody,
I've just bought a W90 smartwatch and I've been waiting to receive it directly from China.
I've bought the W90 in order to change its firmware, thanks to its MTK6260A cpu, but I didn't undestand if I can or not with teh procedure found out in the Forum XDA.
Could anyone help me, please?
Thank you a lot.
Click to expand...
Click to collapse
firmware ok here
Hello!
Can I change the original watchface with all the watchfaces compatible with the DZ09 (there are a lot of beautiful watchfaces posted in XDA by other members)?
Have I any limitation about the dimension in KB of the watchfaces?
If yes, could I flash any other firmware to the W90 (for example, any other firmware compatible with the 6260a chipset)?
Thank you very much.
Best regards
Hi, need rom for u80 pft022. Could anyone help me, please?
votrunghankts said:
firmware ok here
Click to expand...
Click to collapse
This firmware's. The screen shifted up and down the Strip
Ever get any help with this. Like an idiot I flashed the firmware here and same results. Shifted screen. Also cannot find any other compatible firmware.
---------- Post added at 05:24 AM ---------- Previous post was at 05:20 AM ----------
dinatron said:
This firmware's. The screen shifted up and down the Strip
Click to expand...
Click to collapse
Any fix?
firmware
Exploda said:
Ever get any help with this. Like an idiot I flashed the firmware here and same results. Shifted screen. Also cannot find any other compatible firmware.
---------- Post added at 05:24 AM ---------- Previous post was at 05:20 AM ----------
Any fix?
Click to expand...
Click to collapse
Here operating firmware http://4pda.ru/forum/index.php?showtopic=757536&st=140
dinatron said:
This firmware's. The screen shifted up and down the Strip
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/0B_hRh3DjuBoeU2RuRzZDaV9aUGc?usp=sharing
use the third firmware. Took me forever to get it too. Thanks to Golem_
ok
When I reply to messages on my w90, I it tells me to delete, block and something else.. I have to hit ok to delete but it doesn't delete message.. It then brings me to reply etc.. When I reply, it seems to send me a the reply 6 times instead of one.. What do I do
mohamed
please i have the same problem with you i want the link of original firmware and how do do it with black screen and my watch
w90
Hello, I have a smartwatch. Its codename is 'A1'. It's quite similar to GT-08. Just check at youtube, type 'smartwatch a1' and you'll know what I am talking about. Now I need its original firmware. I tried to use GT-08's firmware but it doesn't work. Does anyone here use this kind of smarwatch (A1)? Can you please help me? My watch uses MTK6261. Thank you
Same Problem
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
andriraihanw said:
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
Click to expand...
Click to collapse
I have the same watch and I can help you if you explain to me how to backup my firmware
zdeni82 said:
I have the same watch and I can help you if you explain to me how to backup my firmware
Click to expand...
Click to collapse
there is the tutorial here
https://www.youtube.com/watch?v=0BIeY35AUaQ
wish that helpful
i have a lot of link smartwatch a1 firmware ,
but the problem , to download it i need to register to that russian forum
http://4pda.ru/forum/index.php?showtopic=713552&st=300
even Gtranslate can translate the page , but the verification method is really hard . hopefully russian people can have a mirror link.
andriraihanw said:
there is the tutorial here
wish that helpful
i have a lot of link smartwatch a1 firmware ,
but the problem , to download it i need to register to that russian forum
even Gtranslate can translate the page , but the verification method is really hard . hopefully russian people can have a mirror link.
Click to expand...
Click to collapse
I am registered there if you need login details I can give you
login details
zdeni82 said:
I am registered there if you need login details I can give you
Click to expand...
Click to collapse
Hi zdeni. Pls can u help me wh login details? I have a A1(MTK6261) smartwatch and need a frimware. Thankyou verry much.
can you help me pls ?
I have a A1(MTK6261) smartwatch...
andriraihanw said:
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
Click to expand...
Click to collapse
Hi zdeni. Pls can u help me wh login details? I have a A1(MTK6261) smartwatch and need a frimware. Thankyou verry much.
bobseptian said:
Hello, I have a smartwatch. Its codename is 'A1'. It's quite similar to GT-08. Just check at youtube, type 'smartwatch a1' and you'll know what I am talking about. Now I need its original firmware. I tried to use GT-08's firmware but it doesn't work. Does anyone here use this kind of smarwatch (A1)? Can you please help me? My watch uses MTK6261. Thank you
Click to expand...
Click to collapse
How can I upload the zip/rar/txt file?
Help me!!!
hd88alx said:
How can I upload the zip/rar/txt file?
Click to expand...
Click to collapse
I also have a clock A1 and flash FW GT08 I present it as the screen upside down I almost lost the ability to touch
huynh123 said:
I also have a clock A1 and flash FW GT08 I present it as the screen upside down I almost lost the ability to touch
Click to expand...
Click to collapse
Sand me data about it....ram ?...
Just receive my A1 watch
Just receive my A1 watch: *#8375#
Code:
LD991B_V5.7_BB_ZX_S1_CAM3a01_LX7789_9304_B_V1.2
[BRANCH]
11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD_TIME]
2017/01/12 14:28
[MRE VERSION] -
267014452
HAL_VERNO:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
defdefred said:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
Click to expand...
Click to collapse
Here is the original firmware
zdeni82 said:
Here is the original firmware
Click to expand...
Click to collapse
Thank you very much zdeni82!
Unfortunately, the firmware is not compatible with my A1 clone
Screen is in the correct way, but the top is not usable neither the touch screen.
My watch is not the same clone as yours...
defdefred said:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
Click to expand...
Click to collapse
I tried "XDA DZ09_MT6261_32MB_NOR_2nd_ChrisTopf" and everything is working... except that the screen is flipped and so the touch
I wonder if turn the screen 180° inside the watch is possible...
Is there Anyone who need a firmware for A1? I have this watch and I can back it up.
ChorusCitrus said:
Is there Anyone who need a firmware for A1? I have this watch and I can back it up.
Click to expand...
Click to collapse
Me! me! me! me!
SP Flash Tool requires scatter file. What now?
ChorusCitrus said:
SP Flash Tool requires scatter file. What now?
Click to expand...
Click to collapse
If you watch is a 4MB/32MB RAM kind, you can take any scatter file from https://drive.google.com/drive/folders/0B_hRh3DjuBoeNl9tM3ZRc0pDeTQ
If you want to use the test RAM, don't make the same mistake I did = Most important is to uncheck the NOR test to avoid a complete lost of firmware So be careful.
The marvelous Golem explanation are here = https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Here you go guys!
Let me know if that works.
Link: uloz.to/!UIPSqTxjlhCn/a1-firmware-rar
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Valerc said:
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Click to expand...
Click to collapse
unfortunately I do not have a backup of the SMA-R.
Of course the GW01 and NO.1 G3 firmware have the bluetooth function but only 4.0, while the SMA-R also has Bluetooth 3.0 that I think drain the battery slowly.
Happy Xmas
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Emirio said:
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Click to expand...
Click to collapse
hello , it's happened to me too , i resolved only with turn on , let the battery drain to 0 , connect to pc , turn it on , press file manager , swiping the screen , go to setting and reset all the watch , it worked to me
Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Matuskaur said:
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Click to expand...
Click to collapse
You may need this tutorial.How to update MTK smartwatch
JKSurf said:
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Click to expand...
Click to collapse
Hi, i wait somebody who can save the sma r firmware.
I hope you can make it, because my is bricked.
Here is the step by step guide to make it.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
If it is working, please send the firmware here to this forum.
Many thanks!
I also have the SMA-R without its original frware, it happened the same to put the faces, and I had to put the No.1 G3 but it does not work well, it lowers very fast the capacity of the battery and besides it does not work The heart meter. If someone can pass the SMA-R firmware for the whole community? We would be very grateful to you
While waiting, can someone tell me where the gw01 ulefone firmware can be downloaded?
Update, is here in case anyone needs it:: Forum: xda-developers Smartwatches Misc Other SmartWatches Ulefone GW01 smartwatch Puesto # 53
Pd: I have requested by mail and by your facebook to SMA to send me the firmware, if they send it I would post it in this forum
Yesterday, after two days i received it, my SMA-R doesn't work anymore. The display is always black... Do you know if there's a way to fix it? Thanks
Install the uplink firmware qw1 that goes very well. Until someone puts sma firmware
Do you have a tutorial? I don't know how to do it
Sorry for not letting me put the link to the page, but follow this route and there you can find the firmware and manual
Update, is here in case anyone needs it::
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
--------Ulefone GW01 smartwatch Puesto(# 53
Manual
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
.............Ulefone GW01 runs with firmware of No.1 G3 by Tornator
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
alfhas said:
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
Click to expand...
Click to collapse
I know GW01 and G3, but what is SMA-R ? Will you brick your watch if you don't flash the firmware successfully.....Think about Pablo they recommended us not to flash other watch firmware, they might make your watch no longer work.
The sma-r is another smart watch just like g3vo gw1 ... all use similar hardware and firmware is compatible ... If you can repair or reset the clock when it is broken, you can always put another firmware and recover The clock even with different system of these three compatible.
Unfortunately I use a Mac so I can't use FlashTools, even using Virtualbox to emulate Windows... Do you know if there's some other software for mac? thanks
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Original SMA-R Firmware
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...-benzóico.
---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------
newbiesk said:
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Click to expand...
Click to collapse
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...
i try change new face clock on us18 smartwatch that i buy from aliexpress site, and the firmware on device be black i can't use with smartwatch anymore i always see black screen
i very sad i need someone that can upload the file flash to here please
the link of the watch on aliexpress
https://www.aliexpress.com/item/New...lgo_pvid=c5831ee3-ca02-44b3-ad56-f1263d4ad57c
solved, can close the post
israrami said:
solved, can close the post
Click to expand...
Click to collapse
Hi! Can you explain me how you solved it? I have the same problem...
Many thanks!
Hi, i tried to instal new watchface on my smartwatch. after succesfull installation and the watchface status is installed, the new watchface did not show up in my smartwatch. I tried using both fundo and mediatek app and the result is the same. Any idea why?
I have this watch and the same happen to me. Did anyone knows why?
One thing I noted, this watch has 12 watchfaces pre installed. Maybe it cannot display more than that.
Has anyone been able to remove a watch face to be able to load a new one.
No1 DT98 Watchfaces issue
Having the same issue. Able to 'install' the watchface via MediaTek, but then doesn't show up on dial selector...
Anyone with a way around this - help would be very welcome....
Where did you find the watchfaces?
Someone tried to remove one of the preinstalled WF to free up a slot?
the same problem anf from me i cant install watchfaces,,,and i send email to company and ,,,,1)my questions to company is:..hello i have a few days the model dt98 but i can not install wachfaces or vxp faces...the firmware is XM027_C19_V1_B_2019_0929-3...i tested the app Mediatek SmartDevice_vV1.7.6_ but nothing,,,,, says ok install accsses but dont install if i check the smartwatch,,,,i found the other firmware G8vxptest for vxp watch faces but it is not impossible install this....please send me another firmware who working and i can put watchfaces and vxp files or give me the downloaded link firmware...i am waiting your answer......thank you
And the answer from company ::hi DT98 can't install extra watchface due to the memory and why you do that, my friend?
2)my question again::because i want make some custom vxp watch faces and some vxp football faces....please its impossible.. i no that in forums,, i read with old firmwares its impossible,,,tell me what firmware is this?..its an old firmware??or some new firmware??or firmware from another model who is the same??i am waiting your answer..thank you
the company answer again: Our old android watch can support install watchface but new model like DT98 can't. thanks for the understanding.....
maybe its big fools......the guys
---------- Post added at 03:41 PM ---------- Previous post was at 03:34 PM ----------
must found other firmware from another model or another mark who have the same parameters for hardware and software ,,,,,,,,,,only this solution it is for this model dt98,,,if someone found another firmware post it here..
Issues
Hi.
I'm looking for software update because my dt98 does all...worng (steps, heart rate, distance )
Hi dhiotis,
I think you will be very disapointed: dt98 is not a smartwatch but a ... toy watch! Everything is fake: steps, heart rate, O2... The only thing witch is real is the time!
For example: my pillow has 98% O2! And 72/min heart rate!
Sorry but this is not a firmware problem...
At least, you made me laupgh
But I hope that some day and some how, the software could be updating.
Give up, everyone, there's no way to change a watch's face
MDK125 said:
Give up, everyone, there's no way to change a watch's face
Click to expand...
Click to collapse
Is there no way to replace one face with another?