CyanogenMod just announced that we are going to receive official cm13 nightly starting today.
http://www.cyanogenmod.org/blog/a-marshmallowy-cm
It's being built and should be up in hours.
Check the download link: http://download.cyanogenmod.org/?device=v410 for v410.
Update: it's ready for download:
https://download.cyanogenmod.org/get/jenkins/136126/cm-13.0-20151124-NIGHTLY-v410.zip, for V410.
https://download.cyanogenmod.org/get/jenkins/136125/cm-13.0-20151124-NIGHTLY-v400.zip, for V400.
Download gapps: https://www.androidfilehost.com/?fid=24269982086995422
Sent from my LG-v410 using XDA Premium App
Anyone get it to boot? Mine has been stuck on "Starting Apps" forever.
dave5777 said:
Anyone get it to boot? Mine has been stuck on "Starting Apps" forever.
Click to expand...
Click to collapse
Same situation, I tried to do wipe system, data, internal storage, cache and Dalvik Cache, also only ROM (no gapps) and does not work
v400 - twrp 2.8.5
Yeah, mine hangs on starting apps. I've tried multiple install scenarios. ROM w/o gapps. ROM with banks 6.0, ROM with opengapps 6.0. I get the same thing every time. Unfortunately too, our device got love before alot of others
Sent from my LG-V410 using XDA Free mobile app
Fresh build is up :fingers crossed:
Finally!!
dave5777 said:
Finally!!
Click to expand...
Click to collapse
How do you remove the # icon in status bar? Install supersu 2.5.2?
Report one bug: double tap to wake not working even when enabled in settings.
Sent from my LG-v410 using XDA Premium App
googlephone said:
How do you remove the # icon in status bar? Install supersu 2.5.2?
Report one bug: double tap to wake not working even when enabled in settings.
Sent from my LG-v410 using XDA Premium App
Click to expand...
Click to collapse
The icon is only visible if you have a root app running, same here with tap to wake.
This is running pretty great. No double-tap to wake yet, though.
Anyone able to install themes? I get "failed to install theme error" I tried setting selinux to permissive no luck.
Anyone else unable to install of the last two nightlies overtop the first CM13 nightly?
Runs like a lame flea ridden dog
Might be a little quirky but not completely terrible, not sure if this is a newer build. Also using a uk410 but I think it's the same as a v410 as all of the roms I've tried have no issues... Will report anything really screwy...
I don't understand the reason why v400 roms are posted inside the v700 forum.
Are they compatible? Can I flash them on my G Pad 10.1 without bricking it?
Firelord70 said:
I don't understand the reason why v400 roms are posted inside the v700 forum.
Are they compatible? Can I flash them on my G Pad 10.1 without bricking it?
Click to expand...
Click to collapse
Somehow, despite having devs, we don't have our own subforum. Join us in bugging xda so we can get out of your hair! [emoji106]
dave5777 said:
Finally!!
Click to expand...
Click to collapse
Great to see it working finally.
Which version of twrp did you use?
Can you please post the steps exact steps you follow?
Enviado desde mi XT1096 mediante Tapatalk
josuearisty said:
Great to see it working finally.
Which version of twrp did you use?
Can you please post the steps exact steps you follow?
Enviado desde mi XT1096 mediante Tapatalk
Click to expand...
Click to collapse
2.8.5.0. Just grab the latest nightly and ARM 6.0 gapps from open gapps I used full you can use which ever flavor you want just, Wipe data/cache install ROM followed by gapps. Everything works I haven't seen any bugs.
Sent from my ONE A2005 using Tapatalk
dave5777 said:
2.8.5.0. Just grab the latest nightly and ARM 6.0 gapps from open gapps I used full you can use which ever flavor you want just, Wipe data/cache install ROM followed by gapps. Everything works I haven't seen any bugs.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Thanks!
I going to take some files out then Im going to install it.
Enviado desde mi XT1096 mediante Tapatalk
Hi everyone, just got the device unlocked it's lollipop an ATM (AT&T) version. Should I update anything on stock firmware or root, rip and let her fly on CM 12 or 13. Thanks
Sent from my Nexus 6P using Tapatalk
badrsj said:
Hi everyone, just got the device unlocked it's lollipop an ATM (AT&T) version. Should I update anything on stock firmware or root, rip and let her fly on CM 12 or 13. Thanks
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
If it's rooted and you have TWRP installed, you might want to back up stock first. Other than that, download CM13 and open apps and install. No problems.
Related
Guy's running Omega v18 rom my phone and wanted to install official cm11 on my phone but the installation is always aborted and I don't know what to do any more so im here to ask you if any one has any solution it would be nice.
Sent from my GT-I9505 using Tapatalk 2
flyboy21 said:
Guy's running Omega v18 rom my phone and wanted to install official cm11 on my phone but the installation is always aborted and I don't know what to do any more so im here to ask you if any one has any solution it would be nice.
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
try to change your recovery mate TWRP?
I did changed to twrp but still the same
Sent from my GT-I9505 using Tapatalk 2
flyboy21 said:
I did changed to twrp but still the same
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
guys i did it installed cyanogenmod thru the cm installer app and then manually installed cm11 over top of it and everything went good so far
Using this would we not be able to boot Safestrap since SELinux is all that is stopping us?
http://forum.xda-developers.com/showthread.php?t=2524485
I changed mode to permissive, installed APK and I am booted into Safestrap creating a ROM slot right now... will flash a ROM to it shortly to test.
You don't need that app to use safestrap. Just a rooted phone and then install app and recovery
Sent from my XT1058 using Tapatalk
krazyace35 said:
You don't need that app to use safestrap. Just a rooted phone and then install app and recovery
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
I can confirm this
Sent from my XT1058 using Tapatalk
bongostl said:
I can confirm this
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Can you confirm that safestrap works on KITKAT 4.4? according to hash its broken in kitkat and may never work......I've heard rumors that there might be a work around though.
Sent from my XT1058 using XDA Premium 4 mobile app
Yes.it works.using it now
Sent from my XT1058 using Tapatalk
bongostl said:
Yes.it works.using it now
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Are you sure that you are not on 4.2.2 using the 4.4 rom on your 1st ROM slot. That is the only way I have heard of having KitKat and still use Safestrap.
I am on 4.4 rooted with slap and running eclipse ROM flashed through safestrap. It does work
slapped the sh*t out of my X
lowvolt1 said:
I am on 4.4 rooted with slap and running eclipse ROM flashed through safestrap. It does work
slapped the sh*t out of my X
Click to expand...
Click to collapse
Hmm. I tried that setup and I got constant issues with the dialer not working when I tried to place a call. Also issues receiving calls.
It worked probably 60% of the time.
I tried to run it on a slot and on the stock side.
Both ways was super finiky. I wonder if it was The ROM being the issue.
I ended up flashing back with RSD when I got frustrated.
Sent from my XT1058 using XDA Premium 4 mobile app
matt99017d said:
Hmm. I tried that setup and I got constant issues with the dialer not working when I tried to place a call. Also issues receiving calls.
It worked probably 60% of the time.
I tried to run it on a slot and on the stock side.
Both ways was super finiky. I wonder if it was The ROM being the issue.
I ended up flashing back with RSD when I got frustrated.
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I backed up stock slot and wiped everything. Mounted system and flashed to stock slot. This is the second day running it. With no issues. Also running xposed modules.
slapped the sh*t out of my X
Works here without this too
Sent from my XT1060 using Tapatalk
Works for me too!
Sent from my XT1058 using Tapatalk
krazyace35 said:
Works for me too!
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
What version of SafeStrap is everyone running? I have the VZW Moto X, and want to make sure I use the correct version. I am running 4.4 stock, root.
Thanks!
AngryITGuy said:
What version of SafeStrap is everyone running? I have the VZW Moto X, and want to make sure I use the correct version. I am running 4.4 stock, root.
Thanks!
Click to expand...
Click to collapse
I don't know if safestrap for Verizon works on 4.4 but here is the link to v3.63a u will have to get for Verizon moto x I am on AT&T v3.65 safestrap http://rootzwiki.com/index.php?/topic/104161-[RECOVERY-LOCKED]-Safestrap-Recovery-v3.65-[2013-11-13]
Sent from my XT1058 using Tapatalk
krazyace35 said:
I don't know if safestrap for Verizon works on 4.4 but here is the link to v3.63a u will have to get for Verizon moto x I am on AT&T v3.65 safestrap http://rootzwiki.com/index.php?/topic/104161-[RECOVERY-LOCKED]-Safestrap-Recovery-v3.65-[2013-11-13]
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
There is a 3.65 for Verizon as well. I just installed and it's working fine it seems.
Edit: I should also say that when I say it's working fine, I mean it installed and I was able to boot into it. I also made a backup of my stock slot. Other than that, I haven't done anything. I would attempt to install another ROM into a different slot, but I don't know of any roms that are compatible (I haven't really looked). Still, it seems as though it's working fine.
I'm new to the g2 and don't know how to tell what roms are compatible with the Rogers g2. I was told that the boot.img for various d803s are different and I'm wondering how to tell if a rom is safe to flash or not. Thanks
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
I'm new to the g2 and don't know how to tell what roms are compatible with the Rogers g2. I was told that the boot.img for various d803s are different and I'm wondering how to tell if a rom is safe to flash or not. Thanks
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
Only install the ROM if it says it supports your model. The model number isn't just a superficial change. If you do flash it with something unsupported back everything up. EVERYTHING. Then prepare for some bricking down the road if you forget what you have done to it. I just did a full week of unbricking because my d803 got flashed by the previous owner with an ATT recovery which was somehow permitted because an unsupported ROM was flashed onto it.
Also, if you have a copy of the stock ROM on your phone… Can I have a copy?
LayCraft said:
Only install the ROM if it says it supports your model. The model number isn't just a superficial change. If you do flash it with something unsupported back everything up. EVERYTHING. Then prepare for some bricking down the road if you forget what you have done to it. I just did a full week of unbricking because my d803 got flashed by the previous owner with an ATT recovery which was somehow permitted because an unsupported ROM was flashed onto it.
Also, if you have a copy of the stock ROM on your phone… Can I have a copy?
Click to expand...
Click to collapse
So if it says it supports the d803 then am I good to go? And how would I go about copying the stock rom. I'm fully stock no changes.
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
So if it says it supports the d803 then am I good to go? And how would I go about copying the stock rom. I'm fully stock no changes.
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
You need to…
Root using this guide.
Install TWRP. Just use FreeGee http://bit.ly/FreeGee
Make backups. Follow this guide.
Move the backups onto your computer for safe keeping. (android file transfer software)
Then after all is said and done, you throw some roms into a rom folder that you make using android file transfer software. Reboot into the TWRP recovery and install the roms.
LayCraft said:
You need to…
Root using this guide.
Install TWRP. Just use FreeGee http://bit.ly/FreeGee
Make backups. Follow this guide.
Move the backups onto your computer for safe keeping. (android file transfer software)
Then after all is said and done, you throw some roms into a rom folder that you make using android file transfer software. Reboot into the TWRP recovery and install the roms.
Click to expand...
Click to collapse
Sounds good. Any roms you know compatible with the Rogers variant?
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
Sounds good. Any roms you know compatible with the Rogers variant?
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
There's actually quite a bit now. There's Carbon, Mahdi, Paranoid Android, Beanstalk, Dirty Unicorns (running it right now and it's pretty damn good) and Hellfire KitKat. Although I had problems flashing Hellfire, so you might want to wait till the next release. :/
Sent from my G2 using Tapatalk
gusly said:
There's actually quite a bit now. There's Carbon, Mahdi, Paranoid Android, Beanstalk, Dirty Unicorns (running it right now and it's pretty damn good) and Hellfire KitKat. Although I had problems flashing Hellfire, so you might want to wait till the next release. :/
Sent from my G2 using Tapatalk
Click to expand...
Click to collapse
Thanks so I would obviously flash the d803 file for the Rogers variant right?
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
Thanks so I would obviously flash the d803 file for the Rogers variant right?
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
Indeed. Be sure to wipe everything. Happy flashing!
Sent from my G2 using Tapatalk
Do not wipe internal storage ! Everything else is ok.
Rammv said:
Do not wipe internal storage ! Everything else is ok.
Click to expand...
Click to collapse
So cache, davlik cache, data, system?
Sent from my LG-D803 using Tapatalk
Yes. If you wipe internal storage its a pain in the a#$ to restore phone. So be careful not to wipe.
... Probably should've specified everything EXCEPT internal storage... Whoops...
Sent from my G2 using Tapatalk
Thats cool. Just here to help the new people when I can.
Sent from my LG-LS980 using Tapatalk
gusly said:
... Probably should've specified everything EXCEPT internal storage... Whoops...
Sent from my G2 using Tapatalk
Click to expand...
Click to collapse
You have the Rogers g2?
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
You have the Rogers g2?
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
Yes I do, actually.
Sent from my G2 using Tapatalk
gusly said:
Yes I do, actually.
Sent from my G2 using Tapatalk
Click to expand...
Click to collapse
And it's safe to use freegee?
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
And it's safe to use freegee?
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
I never used freegee due to it being a paid app. I think I used the flashify app.
Sent from my G2 using Tapatalk
gusly said:
I never used freegee due to it being a paid app. I think I used the flashify app.
Sent from my G2 using Tapatalk
Click to expand...
Click to collapse
When you used flashify to flash twrp were you able then flash roms, etc?
Sent from my LG-D803 using Tapatalk
nucl3archick3n said:
When you used flashify to flash twrp were you able then flash roms, etc?
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
Indeed. Everything works fine.
Sent from my G2 using Tapatalk
nucl3archick3n said:
I'm new to the g2 and don't know how to tell what roms are compatible with the Rogers g2. I was told that the boot.img for various d803s are different and I'm wondering how to tell if a rom is safe to flash or not. Thanks
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
Hey man, I'm new like you. Yesterday I finally figured out what was the problem. You need to have TWRP 2.6.3.4 installed (you can install 2.6.3.2 and use it to flash the 2.6.3.4 zip file. I don't know why, but 2.6.3.2 won't flash 4.4 ROMS.
I'm using Paranoid Android's most recent ROM for the D803 and it's great. I use the Nova Launcher and it provides that little extra bit of customization. I removed all of the rogers bloat crap and the thing runs like a dream. No issues so far, at all.
If you need any help with anything, or with finding the .zip for TWRP 2.6.3.4 just shoot me a message and I'll see if I can help.
Good luck!
Hello xda. I have a simple and probably stupid question but i have rooted my g2 and installed twrp with little to no issue. I downloaded the hellfire kitkat rom and flashed it through twrp. Is it normal to get a bootloop after install? After install i wiped like everything in the posts said and when i rebooted i just got the lg logo looping. I let my phone sit for about 10 mins like that before recovering my original rom.
E4with said:
Hello xda. I have a simple and probably stupid question but i have rooted my g2 and installed twrp with little to no issue. I downloaded the hellfire kitkat rom and flashed it through twrp. Is it normal to get a bootloop after install? After install i wiped like everything in the posts said and when i rebooted i just got the lg logo looping. I let my phone sit for about 10 mins like that before recovering my original rom.
Click to expand...
Click to collapse
Are you sure you downloaded the correct ROM, first? 2nd, be sure you are using at least TWRP 2.6.3.3 or you will have problems.
Sent from my LG-D800 using Tapatalk
Jank4AU said:
Are you sure you downloaded the correct ROM, first? 2nd, be sure you are using at least TWRP 2.6.3.3 or you will have problems.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yeah i downloaded the file for the ls980...which is the sprint version of the g2. I installed the gapps right after. I believe that i am using twrp 2.6.3.3 becuase when i tried to install 2.6.3.2 it made my phone go into fatboot mode. I will double check that as well.
E4with said:
Yeah i downloaded the file for the ls980...which is the sprint version of the g2. I installed the gapps right after. I believe that i am using twrp 2.6.3.3 becuase when i tried to install 2.6.3.2 it made my phone go into fatboot mode. I will double check that as well.
Click to expand...
Click to collapse
Just checked on the twrp and indeed i am running 2.6.3.3
Did you try fixing permissions (I saw in hellfire rom thread that after flashing you should fix permissions and then reboot)
Sent from my LG-D800 using xda app-developers app
E4with said:
Just checked on the twrp and indeed i am running 2.6.3.3
Click to expand...
Click to collapse
Which gapps package are you using? What date?
Sent from my LG-D800 using Tapatalk
Jank4AU said:
Which gapps package are you using? What date?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I am using the hellfire gapps 4.2.2 which is dated 12132013.
E4with said:
I am using the hellfire gapps 4.2.2 which is dated 12132013.
Click to expand...
Click to collapse
@E4with - the gapps package is the problem. You're flashing a 4.2.2 package on a 4.4.2 ROM. Update to the correct gapps and you won't bootloop.
Sent from my LG-D800 using Tapatalk
Jank4AU said:
@E4with - the gapps package is the problem. You're flashing a 4.2.2 package on a 4.4.2 ROM. Update to the correct gapps and you won't bootloop.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
That was my original assumption aldo but i checked the gapps pack and it is 4.4.2. So im still not quite sure what the problem us with the hellfire rom and my device. Also i tried the aeon flex rom and it worked and booted but would not give me and iption for mobile data usage so now im starting yo think that maybe i need to unroot and start over again.
I still think it's the gapps package being too old. Update to the newest one from yesterday and try again.
http://forum.xda-developers.com/showthread.php?t=2397942
Sent from my LG-D800 using Tapatalk
Latest Full OTA 4.2 for the original Shield Wi-Fi NA link directly from nVidia:
http://ota-downloads.nvidia.com/ota...wf-full_ota-40827_726.6502.20160610140219.zip
I haven't installed it yet myself, will be doing so shortly...
Update: fixed link (sorry). Also, have since installed it - so far, so good.
Sent from my SHIELD Tablet using XDA Free mobile app
The link is broken
Sent from my SHIELD Tablet using XDA-Developers mobile app
Never mind, I see the original link was fixed.
Sorry - fixed the link - all the / were \ incorrectly..
Sent from my SHIELD Tablet using XDA Free mobile app
Dang it, gotta go RoW LTE version again if we don't want to wait fit Att to approve update... Sigh
An Droid said:
Latest Full OTA 4.2 for the original Shield Wi-Fi NA link directly from nVidia:
http://ota-downloads.nvidia.com/ota...wf-full_ota-40827_726.6502.20160610140219.zip
I haven't installed it yet myself, will be doing so shortly...
Update: fixed link (sorry). Also, have since installed it - so far, so good.
Click to expand...
Click to collapse
Update flashed fine with twrp. I lost twrp and root though.
Sent from my Nexus 6P using XDA Labs
so only for original NA wifi no ROW LTE yet?
Didn't even see the Wi-Fi one posted on their public download center. If you're on the row version and have not received the update notification then it's either not available yet or it's staggered release.
It is ready http://forum.xda-developers.com/showthread.php?p=67718682
I received yestarday ROW LTE update (Poland if it mmatters) . Thanks for the link for my rooted pyro tablet.
Wysłane z mojego SHIELD Tablet przy użyciu Tapatalka
Where I can find the full factory image 4.2?
I want to flash it with xposed in flashfire
I've installed the 4.2 LTE update and can root it fine, but when I flash xposed, it hangs on the logo screen. I've tried the latest version and the one before and it's the same. I can flash the Rom again to get out of the loop. Anyone have any success with Xposed on 4.2?
Sent from my SM-G930F using Tapatalk
An Droid said:
Latest Full OTA 4.2 for the original Shield Wi-Fi NA link directly from nVidia:
http://ota-downloads.nvidia.com/ota...wf-full_ota-40827_726.6502.20160610140219.zip
I haven't installed it yet myself, will be doing so shortly...
Update: fixed link (sorry). Also, have since installed it - so far, so good.
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
Is this for the wifi version? Can it be flashed via twrp?
Sent from my SHIELD Tablet using XDA-Developers mobile app
Edit: Got it working
AMoosa said:
I've installed the 4.2 LTE update and can root it fine, but when I flash xposed, it hangs on the logo screen. I've tried the latest version and the one before and it's the same. I can flash the Rom again to get out of the loop. Anyone have any success with Xposed on 4.2?
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Which root did you install? I cannot get it to boot after installing SuperSu 2.46 through TWRP.
geotherm said:
Which root did you install? I cannot get it to boot after installing SuperSu 2.46 through TWRP.
Click to expand...
Click to collapse
I'm not sure of the version number. But it did boot fine after supersu.
Sent from my SM-G930F using Tapatalk
geotherm said:
Which root did you install? I cannot get it to boot after installing SuperSu 2.46 through TWRP.
Click to expand...
Click to collapse
You need to use a newer one, SuperSu 2.76 is the latest stable build, and supports Super User without modifying the system partition, the older Supersu will be trying to modify the system partition and is probably the cause of your boot issues. You'll have to reflash the OTA and flash the newer SuperSu.
Is there a pre-rooted version anywhere with the killswitch removed?
Is it me or is the ui with the 4.2 wifi rather sluggish?
Ive done nothing speciall than root and installed the killswitch (ive a pyrotablet).
Has anyone successfully installed Xposed framework on the original shield tablet?
Sent from my SHIELD Tablet using XDA-Developers mobile app
SGE_DEW said:
Has anyone successfully installed Xposed framework on the original shield tablet?
Sent from my SHIELD Tablet using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, I had it working fine prior to the 4.2 update.