[HELP THANKS]THE Albe95 S6 Full 4. 5ROMI CAN NOT USE.THE BASEBAND AND IMEI WERE LOST. - Galaxy S 4 Q&A, Help & Troubleshooting

My phone does not have signal. The rom is great.i wang to use it.how can i do?albe 3.5 is perfect. But the 4.6 can not work. Thank you very much for helpping me.

Which model S4 do you have? Certain models, specifically the M919, will not work with Albe's ROM.
Have you restored the stock ROM for your device? That usually will restore the IMEI.

My suggestion is that you RESTORE your backup (hopefully you made one), check that the rom is indeed intended for your specific model, google a good guide that provides you with step-by-step instructions on how to flash a rom the CORRECT way.
There is a good reason why one should do a FULL backup using a CUSTOM recovery BEFORE flashing a ROM.
Hope it ends well...

Related

[Q] How to recover IMEI? - - Help please!

Hello!
I have a Galaxy S3 currently running Paranoid Android 3.99-RC1. I just flashed this today from Cyanogenmod and everything went pretty smoothly except that when I was setting up the phone there was no mobile network. I investigated and the Baseband version is Unknown and I can not do anything else with my phone.
I have looked everywhere on what to do, but I am not 100% sure and would appreciate some guidance.
Should I just go ahead and flash the stock rom to backup imei and efs folder? - I don't think I did this before.
With Root Browser I did find this: efs folder --> imei folder ---> mps_code.dat
When I do the *#06# IMEI is blank.
Thanks.
Switch to TWRP recovery and flash the ROM again
Sent from my Nexus 4 using Tapatalk
The post above me won't help. I had the EXACT same problem. Switched from CM to PA 3.99 RC2 for my GS3 AT&T.
Odin flash the stock ROM for your specific device. Essentially un-root it. Then you will have to re-root it.
This is pretty much guaranteed to work.
Good luck. Sorry, it is a bit of a process. Finding the stock rom can be slightly annoying too.
i9305 not support (hope - only at the moment)
Hello, I also had the problem with my SG3 - i9305, but didn't figure out how to solve that "no baseband problem".
Tried different basebands, flashed from different recoverys (TWRP, new and older versions, same with CWM), finally gave up and went back to PA3.65 wich worked so far (luckily I had a working backup copy).
Do you have an i9300 or i9305 ?
So - for the i9305 thinks look bad, 'cause the developer has stoped this...
you can have a look at this thread for some reasons...
http://forum.xda-developers.com/showthread.php?t=2203301&page=51
good luck, Quantenkosmos.

S5 recovery 20$ min read all please. I'm desperate

- Intro
- Done and searched so far
- My Questions. (Jump to the end unless you think I haven't search prior )
- Bounty
INTRO
Hey guys. I'm french Canadian (please understand my bad written )
and thanks to the phone I choosed (s5 active g870w telus)
I'm becoming pretty much bilingual I've checked all over
around The Web and over this forum. And can't find an accurate
answer . I know I picked the wrong phone for rooting but
as a construction worker it was a good compromise.
DONE AND SEARCHED
My Samsung Galaxy s5 Active g870w from Telus
is still on 4.4.2 since there is no and there will not be
any update for a while.
I managed to used the g900w8 version of
Chain fire auto root method using Odin 3.09
to get roots.
I have also succès to flash Unity 2.0.1 rom.
So far I figured that my version can count as
the Canadian version of the s5 small g900w8. (I may be wrong)
I found a stock Firmware (that accualy make my
lies in russian ) Wich I used a lot lately due to all
my soft brick.
My goal is to be able to upgrade to a nice custom rom
on lollipop. I was hoping Fusion. And as for the recovery
TWRP would be my choice if it was possible.
Now I am stuck trying to install TWRP. I have followed
multiple guide. I have tried to install from TWRP manager
the version 2.8.6.0 klte. I have tried 3 times and after the app
installation I tried to reboot to recovery using Quick boot,
i always end up in Odin mode.
I then tried to install using Odin flashing the same version
Downloaded from TWRP.me site. Then it let me load into
my stock version. Then if I try to reboot in recovery
it still stock.
I even tried to use safestrap both version at&t and Verizon
and both soft bricked me.
I have read or scan about every thread and none talk about
S5 a g870w. Beside the att version Wich are locked.
QUESTIONS
My Questions and I really beg for answers even if
You have only 1 answer.
1- Is my phone g870w compatible g900w8?
2-is it compatible to any other versions?
3-when looking should I only look for Canadian version or I can also
use either g870 from at&t,Verizon or international. Or I look for
International g900. Since I guess my bootloader is unlocked .
4- Since only at&t and Verizon are supposed to be lock I guess
I can't use safestrap... so are TWRP and CWM the only options?
5- Can someone help me troubleshoot my installations. ?
6- After I install my recovery a a g870w on kitkat 4.4.2
Should I be able to flash lollipop base custom rom?
7- Is it possible that there is no option for me beside
Unity and stock rom.
BOUNTY
It might not be much but I offer a 20$ minimum bounty for who ever
take me outta this non ending bulls*"t.
Thanks guys. And please I swear I have search and read a lot
just Google my model number and you'll always end up on me
Searching and I seems to be the only one g870w talking about
recovery or custom rom. All I found is how to root...
Jon
1- Is my phone g870w compatible g900w8?
No, it is different flashing anything that isn't designed for your exact model number ( even the AT&T ones which are one letter different) won't work.
2-is it compatible to any other versions?
No, only firmwares for your exact phone will work without someone modifying something specific for you.
3-when looking should I only look for Canadian version or I can also
use either g870 from at&t,Verizon or international. Or I look for
International g900. Since I guess my bootloader is unlocked .
Flashing any other model number but your own risks bootloop/bricking as they although look similar can have different firmware partitions amongst other things.
4- Since only at&t and Verizon are supposed to be lock I guess
I can't use safestrap... so are TWRP and CWM the only options?
If someone can have a look at TWRP is possible that they can make a version work for you: ideally I would say with it being so difficult as so few have your model I would go to stock: root and use xposed, and leave the rest.
5- Can someone help me troubleshoot my installations. ?
Sure, happy to help but don't know how much can help when you are trying firmwares for different versions.
6- After I install my recovery a a g870w on kitkat 4.4.2
Should I be able to flash lollipop base custom rom?
Unless someone has made I've for your model type I doubt it.
7- Is it possible that there is no option for me beside
Unity and stock rom.
Yeah unfortunately this is quite likely.
thanks for taking the time.
Now I'll go private with you for personal things.
but before maybe few extra questions will help the very few others in
the same painful situation.
about compatibility you answered no.
What made me search so bad is that I've seen
other members(g870a) claiming they we're using
g900 roms I'll search for a link.
-Does it mean even tho its risky or
it means that American version have more luck ?
-am I still able to use a recovery like safestrap?
-can I hang myself?
- and if I'd like to have TWRP and a know custom rom
would it be a lot of works for Des.
Is it "askable" are some working for money?
I hate stuck to death I miss my note 3 like crazy. .. damn

How to know your Build No on Custom Rom?

Hay there! I just installed Costom Rom on my Galaxy S5 G900I after a great stuggle at one stage i thought I bricked my phone, but lucky this time. All thing is fine even great with custom rom the issue it that, It change my device information and it is Note 5 Now here is my questions?
1) How to know my Build No ( orginal one before custom rom)
2) If I want to installed another Rom then how to find my phone match's Rom?
Thanks and Sorry, If i wasn't clear enough.
Jabbarshah said:
1) How to know my Build No ( orginal one before custom rom)
Click to expand...
Click to collapse
Hi Jabbarshah
If you followed xda tutorials by the letter, you have made a complete Nandroid backup before starting any modifications.
Just in case the information you eagerly need isn't present, you may restore that backup and regain access to it.
What lasted after ROM installation can be easily visualized using Phone INFO ★Samsung★. Specially Hardware and Personal tabs are stock information.
Jabbarshah said:
2) If I want to installed another Rom then how to find my phone match's Rom?
Click to expand...
Click to collapse
Your main information while seeking for a new ROM is the model SM-G900I. Nothing else matters.
You will just need to take care, for future flashes, that your bootloader and modem are matching (closer enough) the firmware you are flashing.
Example:
a) If you intend to flash PopWiz Telstra v5.1 that is compatible with your G900I, would be kinda complex as @iris28 doesn't clearly states which firmware version he's using. The information may be somewhere onto his thread but unfortunately isn't advertised as should.
b) THE GALAXY PROJECT by Master @djb77 states clearly that he's using Lollipop XXS1BPD3. :victory: ... so you end opting for it.
Now you just have to search for the closer firmware you can find that will match (not exactly) TGP. You have a complete list at Sammobile SM-G900I. Seek for your country/provider with higher Lollipop (5.0) release. If you are unable to find a flashable Odin file for that, you may do it yourself (xda way)
Hope I could be clear enough.
Have fun.
.

Installing Omega ROM v20 on Samsung Galaxy S5 SM-G900F

First time poster here.. Help me out yeah?
I wanna stick to the stock look on a S5 so I've ended up with Omega ROM
So my choice for a custom ROM has been narrowed down to the Omega ROM v20 based on Android 6.0.1. The installation instructions on the omegadroid website were pretty much straight forward.
But my question is do I need to flash the bootloader and modem files that are mentioned in the instructions? Or should I install them for good measure and continue with the setup?
If you can link me to a good post regarding this issue that'd be great too..
Thanks in advance,
User.:good:
If you do have the marshmallow boot loader and modem
then you are ready to flash if not flash the files provided BUT take a nandroid backup.
Happy flashing

How can I flash a radio onto a different ROM?

I have used various ROMs on various phones over the years. Each ROM with its merits and demerits.
I have used many ROMs on my N900 (international version) and found the Dr Ketan L24 the most suitable for me while A-Basher has the best radio signal (my model of phone seems generally plagued by a weak signal reception or possible signal attenuation).
1. Can I flash the radio from A-Basher (latest version) on to Dr Ketan (latest version) without issue? I suspect the radios have different ROM bases.
2. If yes (my research shows it can be done albeit it with possible unwanted side effects from the modem flashing), what is the proper procedure in order to minimise unwanted glitches?
RADIO ??
Take it you mean Baseband/ modem
Baseband for YOUR MODEL ONLY can be flashed through Odin . See baseband.modem threads in general section .
Or download full stock rom and flash .
https://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
JJEgan said:
RADIO ??
Take it you mean Baseband/ modem
Baseband for YOUR MODEL ONLY can be flashed through Odin . See baseband.modem threads in general section .
Or download full stock rom and flash .
https://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
Click to expand...
Click to collapse
You're getting me wrong. I have read the thread enough times and both basebands are for my model of phone (SM-N900).
A-Basher ROM (N920CXXU1AOH2)
Dr. Ketan L24 ROM (N900ZSUEBOG2)
Can their modem be flashed interchangeably without my phone glitching. I tried something similar to that 3 years ago and was rewarded with no signal/invalid IMEI. I want to try it again but a little differently (and properly) this time. How can it be done (I have the install zip for both ROMs)?
Namely, how do I extract the modem from a custom ROM and flash it onto another one without compromising my WiFi, GSM and IMEI functionality?
Saipro said:
You're getting me wrong. I have read the thread enough times and both basebands are for my model of phone (SM-N900).
A-Basher ROM (N920CXXU1AOH2)
Dr. Ketan L24 ROM (N900ZSUEBOG2)
Can their modem be flashed interchangeably without my phone glitching. I tried something similar to that 3 years ago and was rewarded with no signal/invalid IMEI. I want to try it again but a little differently (and properly) this time. How can it be done (I have the install zip for both ROMs)?
Namely, how do I extract the modem from a custom ROM and flash it onto another one without compromising my WiFi, GSM and IMEI functionality?
Click to expand...
Click to collapse
Still awaiting a helpful response. Thanks in advance

Categories

Resources