I unplugged my Lenovo a7-50 a3500 from my computer when I was flashing the ROM. Now the device won't turn on.
Please help! What do I do now? :crying:
EDIT: FIXED by using a pin to hit the button under the SD card while holding down the power button. Then the device turned on, then I turned it off and resumed flashing the ROM. It was successful.
But now the WLAN won't turn on!
Related
My tablet totally cannot on when on battery. The screen brights up then goes blank if I connect it to my computer. The Lenovo logo appears and the screen goes blank swiftly if I charge it.
I had tried the power + vol down button and the reset button beside the SIM slot. The SP Memory Test gave me the error "Nand flash was not detected". I can successfully download the firmware using the SP Flash Tool. In a desperate attempt, I also tried to format it.
Anyone can shed some light on how I can go about solving the problem or is it hopeless?
Problem: Power button is not working on my D800. It doesnt turn on or off when I try to click on it. If the phone is off, the only way to turn it back on is plug in the USB. However, the phone still reset if I hold it for like 10sec. I can't get into recovery by holding the power button and down.
History: The phone was recently bricked into qhsusb_bulk mode. I followed the instructions on this board and re flashed some files. I think this is when the power button stopped working. After that I used LG Flash tool to restore to stock 4.4.2.
If anyone can help, I would very appreciate.
Problem: Power button is not working on my D800. It doesnt turn on or off when I try to click on it. If the phone is off, the only way to turn it back on is plug in the USB. However, the phone still reset if I hold it for like 10sec. I can't get into recovery by holding the power button and down.
History: The phone was recently bricked into qhsusb_bulk mode. I followed the instructions on this board and re flashed some files. I think this is when the power button stopped working. After that I used LG Flash tool to restore to stock 4.4.2.
If anyone can help, I would very appreciate.
plzzzz help mee
Hi,
got a huge Problem...
My s6 wont turn on. When pressing power button it turns on shows s6 edge logo and turns off.
I tried Kies 3 firmware initialization, installed successful but same prob, i tried via Odin...same.
I tried Recovery menu wipe cache and Factory Reset.
When pressing Power + Volume Down after couple of reboots white LED keeps constantly on.
Can Someone Help me ?
I just removed Sim Card and the Problem occurd on reboot.
Try reflashing the firmware from samobile.
Hi all,
Its my son's phone. Suddenly the phone froze, had to remove battery to switch off anf on. Thats it.. from that moment it doesn't turn on. The brand logo comes up and pressing vol up+ power didn't take me to recovery mode. I tried several keys but nothing.
When connected to the pc, on device manager it shows "android phone" and th subtitle is adb interface!!
Please help snd advice thank you