Related
How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
I had been struggeling myself alot with this but after looking everywhere I collected pieces of information all over XDA and fixed it.
Since all the information is scatterd around everywhere I thought it would be good to make a complete piece here.
I have only tested this with the device: (Honor 8 FRD-L09)
If anyone got this working on other devices please leave a comment so I can add it to this list for other people to see.
So here it goes:
1- First you need to be have an unlocked bootloader.
2- Flash via fastboot the new TWRP with decryption support Here
3- Download two files:
a- update.zip Link (1.5G)
b- update_data_full_hw_eu.zip Link(1.05G)
4- Flash these two files using TWRP (a then b)
5- Reflash TWRP (using fastboot)
Finally, to root, you need to flash this patched prerooted boot.img B378 root boot image (from SD card): Link(15.8MB)
You can do this with OldDroids TWRP or with surdu_petrus TWRP: Link(36.2MB) and Link(24,2MB)
1- Flash OldDroids or surdu_petrus TWRP
2- Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
3- When it asks where to install click boot.
4- Then reboot and install phh's superuser from the playstore (its the only superuser that works for now)
5- Install JRummy's Busybox Installer and install to /vendor/xbin
Done!
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
If you have any questions feel free to send me a message I had much trouble with it too.
Credits to: morpheus302, Atarii, OldDroid, surdu_petrus and phhusson
thierrybla said:
I had been struggeling myself alot with this but after looking everywhere I collected pieces of information all over XDA and fixed it.
Since all the information is scatterd around everywhere I thought it would be good to make a complete piece here.
So here it goes:
1- First you need to be have an unlocked bootloader.
2- Flash via fastboot the new TWRP with decryption support Here
3- Download two files:
a- update.zip Link (1.5G)
b- update_data_full_hw_eu.zip Link(1.05G)
4- Flash these two files using TWRP (a then b)
5- Reflash TWRP (using fastboot)
Finally, to root, you need to flash this patched prerooted boot.img B378 root boot image (from SD card): Link(15.8MB)
You can do this only with OldDroids TWRP: Link(36.2MB)
1- Flash OldDroids TWRP
2- Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
3- When it asks where to install click boot.
4- Then reboot and install phh's superuser from the playstore (its the only superuser that works for now)
5- Install JRummy's Busybox Installer and install to /vendor/xbin
Done!
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
If you have any questions feel free to send me a message I had much trouble with it too.
Credits to: morpheus302, Atarii, OldDroid and phhusson
Click to expand...
Click to collapse
Hello!
Can you please specify for which variants of the FRD is this valid?
Thank you
RM
omartins said:
Hello!
Can you please specify for which variants of the FRD is this valid?
Thank you
RM
Click to expand...
Click to collapse
I have only tested it on the FRD-L09
I can't say for sure if it works on the others, I'm sorry.
If you got this working on a different device please let me know.
Quick Question: I have installed normal TWRP 3.1.0.0, every time i want to install the newest SuperSu Beta, it resets TWRP completely. Is your guide also going to work for me, or do i have another problem?
david320te said:
Quick Question: I have installed normal TWRP 3.1.0.0, every time i want to install the newest SuperSu Beta, it resets TWRP completely. Is your guide also going to work for me, or do i have another problem?
Click to expand...
Click to collapse
Yes SuperSU doesn't work as far as I know you need Phh Superuser.
But if you already have nougat 7.0 B380 you can just begin at the boot.img installing step and it should work for you too.
Good luck!
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
david320te said:
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
Click to expand...
Click to collapse
The difference is that the TWRP that I linked can flash .img 's
wich you need to flash the boot.img
Try to get back in TWRP and start at step 1 just do the whole guide then your phone should boot again
david320te said:
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
Click to expand...
Click to collapse
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Q: Why does booting take so long?
A: Because of the decryption process which need to finish
its work before twrp tries to access /data partition.
Click to expand...
Click to collapse
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
N01tra said:
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
Click to expand...
Click to collapse
I can boot into TWRP no Problem, as i said, i restored the backed up image (somehow after a factory reset, the stock apps as well as the keyboard was gone, i could not type in my wifi password) in TWRP, but it sat for about 10 Minutes on that screen when i turned the phone off.
I do not have very good Broadband, so i will start at the first step, installing the update files, linked in the first post.
N01tra said:
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
Click to expand...
Click to collapse
You are right it is for P9 but it worked for me regardless though :fingers-crossed:
david320te said:
I can boot into TWRP no Problem, as i said, i restored the backed up image (somehow after a factory reset, the stock apps as well as the keyboard was gone, i could not type in my wifi password) in TWRP, but it sat for about 10 Minutes on that screen when i turned the phone off.
I do not have very good Broadband, so i will start at the first step, installing the update files, linked in the first post.
Click to expand...
Click to collapse
Yeah.. A FactoryReset seems to be a big "no no" after flashting TWRP as it will delete the keyboard and other stuff.
I was in that situation and restored a TWRP backup which got me back to booting into android, but somehow the Camera and LED (flashlight) didn't work.
Restoring an older and a complete backup did not help. Flashing the Update files did not help.
Eventually I ended up following the Honor 8 Rollback steps; going from Emui 5 (android 7) back to Emui 4.1 (android 6).
That also means the Bootloader is locked again, so you'll have to re-unlock it again (if you still have the code, you can use it again).
My steps after the Rollback:
- OTA updated back to Emui 5,
- Factory reset (BEFORE installing TWRP) and reboot.
- Enabled USB debugging,
- Unlock bootloader,
- Flashed TWRP and immediately after that I booted into recovery and rebooted,
- Rebooted to Fastboot (via adb reboot bootloader),
- Fastboot flashed that pre-rooted b378 boot.img and rebooted,
- Installed Phh's root.
N01tra said:
Yeah.. A FactoryReset seems to be a big "no no" after flashting TWRP as it will delete the keyboard and other stuff.
I was in that situation and restored a TWRP backup which got me back to booting into android, but somehow the Camera and LED (flashlight) didn't work.
Restoring an older and a complete backup did not help. Flashing the Update files did not help.
Eventually I ended up following the Honor 8 Rollback steps; going from Emui 5 (android 7) back to Emui 4.1 (android 6).
That also means the Bootloader is locked again, so you'll have to re-unlock it again (if you still have the code, you can use it again).
My steps after the Rollback:
- OTA updated back to Emui 5,
- Factory reset (BEFORE installing TWRP) and reboot.
- Enabled USB debugging,
- Unlock bootloader,
- Flashed TWRP and immediately after that I booted into recovery and rebooted,
- Rebooted to Fastboot (via adb reboot fastboot),
- Fastboot flashed that pre-rooted b378 boot.img and rebooted,
- Installed Phh's root.
Click to expand...
Click to collapse
I had the same as you describe here but I fixed it by flashing the 2 files I posted up here (a and b)
After doing it step by step as described in the first post, it worked I also flashed the P9 TWRP, just to make sure. It works! But i already miss Resurrection Remix from my Mi4c...
However, does this mean TWRP Backups are useless? :/
david320te said:
After doing it step by step as described in the first post, it worked I also flashed the P9 TWRP, just to make sure. It works! But i already miss Resurrection Remix from my Mi4c...
However, does this mean TWRP Backups are useless? :/
Click to expand...
Click to collapse
I'm glad to hear it works! :highfive:
TWRP backups never worked for me I always just flash it clean and then have titanium backup do the rest
Have a nice day
Hi,
maybe what I am going to ask sounds silly but as I am a kind of newbie hope you will forgive me
Why do we have to install a prerooted 378 image instead of a prerooted 380 Image. Aren't we on 380?
Where does this 378 image come from? Until now I only saw Nougat's 360 & 380 Roms.
I am already on 380 but my root doesn't seem to work properly so I wanted to give a try to thierrybla's OP's post but I don't know if to follow his instructions by using OldDroids TWRP to install his suggested prerooted 378 Image or instead by using OldDroids TWRP to install the other thread's Prerooted 380 img.
What shall I do if I'm already on 380 but would like to try thierrybla's procudure so see if I finally get a well-rooted 380 rom?
Any help would be appreciated.
fourcc said:
Hi,
maybe what I am going to ask sounds silly but as I am a kind of newbie hope you will forgive me
Why do we have to install a prerooted 378 image instead of a prerooted 380 Image. Aren't we on 380?
Where does this 378 image come from? Until now I only saw Nougat's 360 & 380 Roms.
I am already on 380 but my root doesn't seem to work properly so I wanted to give a try to thierrybla's OP's post but I don't know if to follow his instructions by using OldDroids TWRP to install his suggested prerooted 378 Image or instead by using OldDroids TWRP to install the other thread's Prerooted 380 img.
What shall I do if I'm already on 380 but would like to try thierrybla's procudure so see if I finally get a well-rooted 380 rom?
Any help would be appreciated.
Click to expand...
Click to collapse
Hey,
Your question is not stupid I can see why you are confused but everytime I tried to root or preroot something it didn't work for me I also run 380 and once I tried the prerooted 378 made by atariii it worked so there is no reason te be skeptical because I was in the same situation as you and this worked for me just give it a try you won't be disappointed
Thanks for your quick answer!!!
Ok, so I understand it is safe to install prerooted 378 image while being on nougat's 380. Thanks, I will try it right now!
fourcc said:
Thanks for your quick answer!!!
Ok, so I understand it is safe to install prerooted 378 image while being on nougat's 380. Thanks, I will try it right now!
Click to expand...
Click to collapse
Tell me how it went !
Goodluck!
Hey thierrybla, it worked beautifully! Thanks!
The only thing I did different is too install the prerooted image with Fastboot instead of the Oldroid Twrp.
I was afraid of messing my good working TWRP setup and decided to try what N01tra user suggested.
It worked like a charm! Thanks again!
fourcc said:
Hey thierrybla, it worked beautifully! Thanks!
The only thing I did different is too install the prerooted image with Fastboot instead of the Oldroid Twrp.
I was afraid of messing my good working TWRP setup and decided to try what N01tra user suggested.
It worked like a charm! Thanks again!
Click to expand...
Click to collapse
that's fine too I'm glad it worked good for you!
Have a nice day!
If so, how? Thanks!
magicmanfk said:
If so, how? Thanks!
Click to expand...
Click to collapse
This was totally bugging me too but after a whole day of trying I've finally managed it.
1) Go to this thread here
2) Boot into fastboot and flash the boot.img and system.img as suggested in the thread
3) Also flash the original recovery using "fastboot flash recovery recovery.img"
4) Go to the official asus support site here and download the update files you need, the last two
5) Download Version V11.41.87.2 and place the file in the internal storage of your sd card, once you pull the cable out your phone the phone should detect a update file and ask if you want to install it. Click OK.
6) The phone will unpack the update and reboot and install it
7) Delete this update file and then add the latest Nougat update file (Version V20.31.49.2)
8) Do the same again and install it and there you have it... the key is that you have to install each incremental update rather than go straight to the latest.
Oh and I don't know if it makes any difference, but I decided to turn off adb debugging once I'd flashed the various boot, system and recovery images before I started to update using the Asus method.
Also I have successfully re-flashed TWRP through fastboot on Nougat.
Hope this helps.
worked for me perfectly
pjcarrmole said:
This was totally bugging me too but after a whole day of trying I've finally managed it.
1) Go to this thread here
2) Boot into fastboot and flash the boot.img and system.img as suggested in the thread
3) Also flash the original recovery using "fastboot flash recovery recovery.img"
4) Go to the official asus support site here and download the update files you need, the last two
5) Download Version V11.41.87.2 and place the file in the internal storage of your sd card, once you pull the cable out your phone the phone should detect a update file and ask if you want to install it. Click OK.
6) The phone will unpack the update and reboot and install it
7) Delete this update file and then add the latest Nougat update file (Version V20.31.49.2)
8) Do the same again and install it and there you have it... the key is that you have to install each incremental update rather than go straight to the latest.
Oh and I don't know if it makes any difference, but I decided to turn off adb debugging once I'd flashed the various boot, system and recovery images before I started to update using the Asus method.
Also I have successfully re-flashed TWRP through fastboot on Nougat.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the instructions; worked for me. Were you able to re-root? I tried to by following this guide: https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
But on step 8 of the supersu website, my phone gets stuck on "starting adb sideload feature." I had already tried installing supersu via twrp, but still no root.
Devalorize said:
Thanks for the instructions; worked for me. Were you able to re-root? I tried to by following this guide: https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
But on step 8 of the supersu website, my phone gets stuck on "starting adb sideload feature." I had already tried installing supersu via twrp, but still no root.
Click to expand...
Click to collapse
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
pjcarrmole said:
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
Click to expand...
Click to collapse
This worked for me, thanks. It's too bad Xposed doesn't support Nougat yet. Missing my Xposed modules.
Devalorize said:
This worked for me, thanks. It's too bad Xposed doesn't support Nougat yet. Missing my Xposed modules.
Click to expand...
Click to collapse
Magisk has a few modules for it but nothing like Xposed.
I'm going to do a full back up and then see how well ZenUI plays with Substratum as most of the ZenUI Themes are pretty poor and I want an all black theme. I'll let people know how it goes if anyone is interested in using substratum.
---------- Post added at 10:28 AM ---------- Previous post was at 09:32 AM ----------
pjcarrmole said:
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
Click to expand...
Click to collapse
Oh, if you're having trouble getting TWRP to stick don't reboot the system but reboot back into Recovery, by holding the Vol - & Power together and using the Volume buttons to select Recovery.
After this you can then reboot normally.
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Worked !!!
Thank you dear. Its worked for mine in p585 oreo android....
Anyone can search mcmilk 7zip in google and download program to extract boot.img.lz4 and get boot.img :good:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Latest twrp dose not worked on my device but this solution work fine
I can confirm that this method does work. I used it on my SM-P580 yesterday. I would suggest that you first backup your all of your apps, contacts, photos, etc using SmartSwitch. You will need to restore everything after the tablet tells you that it needs to be reset because it wipes everything. After the restore, you will need to enter all of your accounts and passwords again but at least all of the data will be back.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
Im not sure if this post belongs here, you link to the T580 TWRP, not the P580.
Is that one compatible with P580?
nill3bor said:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Click to expand...
Click to collapse
If I do this, will I be able to mount my SD Card as internal storage? 16gb just isnt enough on this tablet.
Do you have to be on oreo already for this to work I'm still on 7.0 and with my system modified I can't upgrade normally
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
This one worked for me on a P585Y. You just have to skip the steps below.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
Click to expand...
Click to collapse
It will also show on the Device Maintenance, just ignore the warning.
You can freeze some of the system apps to prevent it from showing on the notification again.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Hello Gyus,
I managed to root the device with the method posted by @amosdinh (Thank you so much). Now I'm trying to configure adoptable storage. So far I didn't achieve this goal. ADB commands doesn't work and I can't install the ASPlugin.zip needed by Root Essentials to set adoptable storage by the app.
TWRP for P585 is corrupted, gives blue/red lines screen. The dev that maintains the code is absent since march. I'm out of luck on this. If anyone have a idea to get adoptable storage on this device while using Oreo, please comment.
Thanks!
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
artaeun said:
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Click to expand...
Click to collapse
Just renaming magisk_patched.img to boot.img and adding to .tar file by 7zip worked for me.
We should ask a dev to update twrp for android 8.1
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
Same freeze for me with the Omni - can't do anything outside of access download mode
Same Problem
cmzizi said:
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
Click to expand...
Click to collapse
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
Really wish this wasn't the case. I'd actually keep this thing if it had a working TWRP.
On my SM-P580 I used Odin and TWRP I don't get the black screen but when I reboot to get into TWRP recovery mode it shows the padlock and says swipe to unlock. Tried many times bit cannot swipe and cannot get past this. All I want is to be able to use the SD card as internal storage. HELP???? Thanks!!
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
thanks in advanced
where can i find stock firmware?
I've just installed magisk using TWRP via command line. P580
I've just installed magisk using TWRP via command line.
Read the entire post before trying this yourself.
I installed the latest TWRP, the one that bugs and doesn't display anything, this allows to root without wiping data. I'm running the latest korean firmware for P580.
Just do this:
1. Launch TWRP and INMEDIATELY LOCK YOUR SCREEN. (I got ghost stripes that disappeared after 2 days when testing this, work with low light so you can notice your screen whenever it tuens on) Please don't forget this point, don't [temporarily] damage your screen as I did.
2. adb push Magisk-v[Current version].zip external_sd
3. adb shell
4. twrp install external_sd/Magisk-v[Current version].zip
After this you just need to install MagiskManager-v[Current version].apk and you will be all done.
But there is one thing...
If you ever get into recovery mode, there is no way out without using adb as far as I know. You can launch download mode and cancel it but you'll boot back to TWRP.
When in twrp touching your screen or any button will wake the device up and will start burning the ghost image to your screen.
So if you know of a method for rebooting to system without using adb, please let me know.
Also a solution for this would be to flash back the stock recovery, wich may or may not force to wipe system, that something that needs to be tested tho.
Update: Ok so, you can use a handy tool called MTKroot on recovery.img.lz4 to get recovery.img, then use 7z to pack it into a tar file and flash that tar file with odin (AP, same as TWRP)
This way you will not have a 0.001% chance of random boot into recovery mode and damage your screen