Related
Android N Preview npc56p (flashable & image with no encryption and dm verification)
This thread is for the first Android N Preview.
For Android N Preview 2 see: http://forum.xda-developers.com/nexus-6/general/android-n-preview-2-npc91k-flashable-t3358335
For Android N Preview 3 see: http://forum.xda-developers.com/nexus-6/general/android-n-preview-3-beta-npd35k-t3381845
For Android N Preview 4 see: http://forum.xda-developers.com/nexus-6/general/android-n-preview-4-beta-npd56n-t3399473
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **** The following are instruction for installing Android N Preview image released by Google on 3/9/2016. After the installation you will have TWRP recovery 3.0.0-1 and the data partition will be erased and unencrypted if you use method 2, which means you will have ~ 3GB more space and ~ 10 seconds faster boot speed **Always backup your data before flashing something a total stranger gives you!
Method 1: Flash update through TWRP recovery
1- You need to have TWRP installed on your phone.
2- Download this flashable zip.
3- Copy to the phone internal storage and flash via recovery.
4- Reboot. Your data should still be intact and your OS is upgraded to N. If your internal storage is unencrypted before flashing it remains unencrypted. Your TWRP is also upgraded to 3.0.0-1.
Method 2: Flash update using a computer
1- ALL of your data including the internal storage will be lost so make a backup. (If you know what you are doing and you are coming from unencrypted Marshmallow you can modify the instructions to not lose data but I won't help you with that).
2- Download this file. Note that it is NOT a flashable zip.
3- Unzip into a folder of your choice on your PC.
4- Open a command window (cmd) and cd to this directory. then run the following:
Code:
flash-all
5- Wait until prompted, then press key to reboot the phone.
6- Your data is wiped and your OS is upgraded to N with unencrypted internal storage. Your TWRP is also upgraded to 3.0.0-1.
Technical details: this is a repacking of the Google image with a modified Kernel and removed userdata and recovery images. Everything else is stock.
Problem downloading from Mega on a mobile browser? Change the page setting to "Request desktop site".
About root
To obtain root after installing this update you should flash SuperSU 2.70 (or higher) in recovery. Get it from here: http://forum.xda-developers.com/apps/supersu/wip-android-n-preview-t3335726. Note that at least at the moment (as of SuperSU 2.70) the root method is a hack solution which requires a lot of further refinement. Many programs are still unable to acquire root and mount the system partition for R/W. However, it is possible to install the android terminal emulator, do an su, mount /system as rw, and do all the modifications within the terminal emulator. Of course you can always use TWRP to modify the system, for which you don't even need to root the device.
Hot dog! First for once... Thanks!
Sent from my Nexus 6 using Tapatalk
#2
will this wipe internal storage ? or only data partition?
For anyone interested...
I enrolled in the Developer Beta program and the OTA worked for me even though I was rooted with SuperSU v2.68.
However, despite installing TWRP 3.0.1 and then SuperSU v2.68 again, root doesn't stick. Fortunately the only critical previously-root-only app I want is a firewall, and Netguard doesn't need root. I can live for a while without Double Tap To Wake, Wakelock detector, Quick Reboot, etc. And the only app that seems to crash is BBC Radio Player, though BBC News and iPlayer still seem ok (warning about libraries, but still plays). And Battery Bot Pro seems to have lost its status bar display...
So it does pretty much what the warnings say - it's stable but not everything will work.
so if i flash this i will still have twrp once rebooted?
kidhudi said:
so if i flash this i will still have twrp once rebooted?
Click to expand...
Click to collapse
if you only flash the boot.img and system.img, then yes. if you flash the whole thing, which includes a stock recovery, itll install the stock recovery. but all you have to do is type in one line into fastboot to reflash twrp.
It would be nice moving forward if Google just made SuperSU/root part of their factory image under developer options. So once you enable developer option, there's a little toggle next to OEM unlock that says "root/SuperSU".
Would make life much easier.
simms22 said:
if you only flash the boot.img and system.img, then yes. if you flash the whole thing, which includes a stock recovery, itll install the stock recovery. but all you have to do is type in one line into fastboot to reflash twrp.
Click to expand...
Click to collapse
kidhudi said:
so if i flash this i will still have twrp once rebooted?
Click to expand...
Click to collapse
The zip doesn't include stock recovery so if you flash everything according to the instructions you will have twrp at the first reboot.
This kernel worked great thanks. I'm still decrypted and didn't have to wipe internal storage. I didn't run the .bat I manually flashed the img files. Wiped data with TWRP.
so can we flash this via twrp?
omaralkha99 said:
so can we flash this via twrp?
Click to expand...
Click to collapse
no, those are IMG format, flash via fastboot.
I'd wait for root ready then flash...
omaralkha99 said:
so can we flash this via twrp?
Click to expand...
Click to collapse
It literally says right next to the link, "Note that it is NOT a flashable zip."
PainToad said:
It literally says right next to the link, "Note that it is NOT a flashable zip."
Click to expand...
Click to collapse
it says twrp recovery in title, so I was wondering....
what about phh superuser? he modified his root to run for android n http://forum.xda-developers.com/and...apable-superuser-t3216394/page30#post65748721
chapelfreak said:
what about phh superuser? he modified his root to run for android n http://forum.xda-developers.com/and...apable-superuser-t3216394/page30#post65748721
Click to expand...
Click to collapse
I flashed that boot img and now i am encrypted and boot-looping. No access to SD card.
Does this build have new bootloader and radio? If so, is it backward compatible to Marshmallow roms or do we need to flash back M bootloader and radio to get M roms work?
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
PainToad said:
It literally says right next to the link, "Note that it is NOT a flashable zip."
Click to expand...
Click to collapse
I lold at this. :laugh::laugh::laugh::laugh:
Flashed and everything is working great except I have no LTE and the only internet I get is on wifi. Running on Verizon sim on StraightTalk.
kclive said:
Flashed and everything is working great except I have no LTE and the only internet I get is on wifi. Running on Verizon sim on StraightTalk.
Click to expand...
Click to collapse
Toggle on and off airplane mode. Turn off wifi and see if it works. I was at work and had to do this a few times
Flashed phh kernel (su-noverity - 3rd one) and installed this superuser. I now have root working.
I had been struggeling myself alot with this but after looking everywhere I collected pieces of information all over XDA and fixed it.
Since all the information is scatterd around everywhere I thought it would be good to make a complete piece here.
I have only tested this with the device: (Honor 8 FRD-L09)
If anyone got this working on other devices please leave a comment so I can add it to this list for other people to see.
So here it goes:
1- First you need to be have an unlocked bootloader.
2- Flash via fastboot the new TWRP with decryption support Here
3- Download two files:
a- update.zip Link (1.5G)
b- update_data_full_hw_eu.zip Link(1.05G)
4- Flash these two files using TWRP (a then b)
5- Reflash TWRP (using fastboot)
Finally, to root, you need to flash this patched prerooted boot.img B378 root boot image (from SD card): Link(15.8MB)
You can do this with OldDroids TWRP or with surdu_petrus TWRP: Link(36.2MB) and Link(24,2MB)
1- Flash OldDroids or surdu_petrus TWRP
2- Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
3- When it asks where to install click boot.
4- Then reboot and install phh's superuser from the playstore (its the only superuser that works for now)
5- Install JRummy's Busybox Installer and install to /vendor/xbin
Done!
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
If you have any questions feel free to send me a message I had much trouble with it too.
Credits to: morpheus302, Atarii, OldDroid, surdu_petrus and phhusson
thierrybla said:
I had been struggeling myself alot with this but after looking everywhere I collected pieces of information all over XDA and fixed it.
Since all the information is scatterd around everywhere I thought it would be good to make a complete piece here.
So here it goes:
1- First you need to be have an unlocked bootloader.
2- Flash via fastboot the new TWRP with decryption support Here
3- Download two files:
a- update.zip Link (1.5G)
b- update_data_full_hw_eu.zip Link(1.05G)
4- Flash these two files using TWRP (a then b)
5- Reflash TWRP (using fastboot)
Finally, to root, you need to flash this patched prerooted boot.img B378 root boot image (from SD card): Link(15.8MB)
You can do this only with OldDroids TWRP: Link(36.2MB)
1- Flash OldDroids TWRP
2- Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
3- When it asks where to install click boot.
4- Then reboot and install phh's superuser from the playstore (its the only superuser that works for now)
5- Install JRummy's Busybox Installer and install to /vendor/xbin
Done!
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
If you have any questions feel free to send me a message I had much trouble with it too.
Credits to: morpheus302, Atarii, OldDroid and phhusson
Click to expand...
Click to collapse
Hello!
Can you please specify for which variants of the FRD is this valid?
Thank you
RM
omartins said:
Hello!
Can you please specify for which variants of the FRD is this valid?
Thank you
RM
Click to expand...
Click to collapse
I have only tested it on the FRD-L09
I can't say for sure if it works on the others, I'm sorry.
If you got this working on a different device please let me know.
Quick Question: I have installed normal TWRP 3.1.0.0, every time i want to install the newest SuperSu Beta, it resets TWRP completely. Is your guide also going to work for me, or do i have another problem?
david320te said:
Quick Question: I have installed normal TWRP 3.1.0.0, every time i want to install the newest SuperSu Beta, it resets TWRP completely. Is your guide also going to work for me, or do i have another problem?
Click to expand...
Click to collapse
Yes SuperSU doesn't work as far as I know you need Phh Superuser.
But if you already have nougat 7.0 B380 you can just begin at the boot.img installing step and it should work for you too.
Good luck!
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
david320te said:
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
Click to expand...
Click to collapse
The difference is that the TWRP that I linked can flash .img 's
wich you need to flash the boot.img
Try to get back in TWRP and start at step 1 just do the whole guide then your phone should boot again
david320te said:
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
Click to expand...
Click to collapse
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Q: Why does booting take so long?
A: Because of the decryption process which need to finish
its work before twrp tries to access /data partition.
Click to expand...
Click to collapse
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
N01tra said:
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
Click to expand...
Click to collapse
I can boot into TWRP no Problem, as i said, i restored the backed up image (somehow after a factory reset, the stock apps as well as the keyboard was gone, i could not type in my wifi password) in TWRP, but it sat for about 10 Minutes on that screen when i turned the phone off.
I do not have very good Broadband, so i will start at the first step, installing the update files, linked in the first post.
N01tra said:
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
Click to expand...
Click to collapse
You are right it is for P9 but it worked for me regardless though :fingers-crossed:
david320te said:
I can boot into TWRP no Problem, as i said, i restored the backed up image (somehow after a factory reset, the stock apps as well as the keyboard was gone, i could not type in my wifi password) in TWRP, but it sat for about 10 Minutes on that screen when i turned the phone off.
I do not have very good Broadband, so i will start at the first step, installing the update files, linked in the first post.
Click to expand...
Click to collapse
Yeah.. A FactoryReset seems to be a big "no no" after flashting TWRP as it will delete the keyboard and other stuff.
I was in that situation and restored a TWRP backup which got me back to booting into android, but somehow the Camera and LED (flashlight) didn't work.
Restoring an older and a complete backup did not help. Flashing the Update files did not help.
Eventually I ended up following the Honor 8 Rollback steps; going from Emui 5 (android 7) back to Emui 4.1 (android 6).
That also means the Bootloader is locked again, so you'll have to re-unlock it again (if you still have the code, you can use it again).
My steps after the Rollback:
- OTA updated back to Emui 5,
- Factory reset (BEFORE installing TWRP) and reboot.
- Enabled USB debugging,
- Unlock bootloader,
- Flashed TWRP and immediately after that I booted into recovery and rebooted,
- Rebooted to Fastboot (via adb reboot bootloader),
- Fastboot flashed that pre-rooted b378 boot.img and rebooted,
- Installed Phh's root.
N01tra said:
Yeah.. A FactoryReset seems to be a big "no no" after flashting TWRP as it will delete the keyboard and other stuff.
I was in that situation and restored a TWRP backup which got me back to booting into android, but somehow the Camera and LED (flashlight) didn't work.
Restoring an older and a complete backup did not help. Flashing the Update files did not help.
Eventually I ended up following the Honor 8 Rollback steps; going from Emui 5 (android 7) back to Emui 4.1 (android 6).
That also means the Bootloader is locked again, so you'll have to re-unlock it again (if you still have the code, you can use it again).
My steps after the Rollback:
- OTA updated back to Emui 5,
- Factory reset (BEFORE installing TWRP) and reboot.
- Enabled USB debugging,
- Unlock bootloader,
- Flashed TWRP and immediately after that I booted into recovery and rebooted,
- Rebooted to Fastboot (via adb reboot fastboot),
- Fastboot flashed that pre-rooted b378 boot.img and rebooted,
- Installed Phh's root.
Click to expand...
Click to collapse
I had the same as you describe here but I fixed it by flashing the 2 files I posted up here (a and b)
After doing it step by step as described in the first post, it worked I also flashed the P9 TWRP, just to make sure. It works! But i already miss Resurrection Remix from my Mi4c...
However, does this mean TWRP Backups are useless? :/
david320te said:
After doing it step by step as described in the first post, it worked I also flashed the P9 TWRP, just to make sure. It works! But i already miss Resurrection Remix from my Mi4c...
However, does this mean TWRP Backups are useless? :/
Click to expand...
Click to collapse
I'm glad to hear it works! :highfive:
TWRP backups never worked for me I always just flash it clean and then have titanium backup do the rest
Have a nice day
Hi,
maybe what I am going to ask sounds silly but as I am a kind of newbie hope you will forgive me
Why do we have to install a prerooted 378 image instead of a prerooted 380 Image. Aren't we on 380?
Where does this 378 image come from? Until now I only saw Nougat's 360 & 380 Roms.
I am already on 380 but my root doesn't seem to work properly so I wanted to give a try to thierrybla's OP's post but I don't know if to follow his instructions by using OldDroids TWRP to install his suggested prerooted 378 Image or instead by using OldDroids TWRP to install the other thread's Prerooted 380 img.
What shall I do if I'm already on 380 but would like to try thierrybla's procudure so see if I finally get a well-rooted 380 rom?
Any help would be appreciated.
fourcc said:
Hi,
maybe what I am going to ask sounds silly but as I am a kind of newbie hope you will forgive me
Why do we have to install a prerooted 378 image instead of a prerooted 380 Image. Aren't we on 380?
Where does this 378 image come from? Until now I only saw Nougat's 360 & 380 Roms.
I am already on 380 but my root doesn't seem to work properly so I wanted to give a try to thierrybla's OP's post but I don't know if to follow his instructions by using OldDroids TWRP to install his suggested prerooted 378 Image or instead by using OldDroids TWRP to install the other thread's Prerooted 380 img.
What shall I do if I'm already on 380 but would like to try thierrybla's procudure so see if I finally get a well-rooted 380 rom?
Any help would be appreciated.
Click to expand...
Click to collapse
Hey,
Your question is not stupid I can see why you are confused but everytime I tried to root or preroot something it didn't work for me I also run 380 and once I tried the prerooted 378 made by atariii it worked so there is no reason te be skeptical because I was in the same situation as you and this worked for me just give it a try you won't be disappointed
Thanks for your quick answer!!!
Ok, so I understand it is safe to install prerooted 378 image while being on nougat's 380. Thanks, I will try it right now!
fourcc said:
Thanks for your quick answer!!!
Ok, so I understand it is safe to install prerooted 378 image while being on nougat's 380. Thanks, I will try it right now!
Click to expand...
Click to collapse
Tell me how it went !
Goodluck!
Hey thierrybla, it worked beautifully! Thanks!
The only thing I did different is too install the prerooted image with Fastboot instead of the Oldroid Twrp.
I was afraid of messing my good working TWRP setup and decided to try what N01tra user suggested.
It worked like a charm! Thanks again!
fourcc said:
Hey thierrybla, it worked beautifully! Thanks!
The only thing I did different is too install the prerooted image with Fastboot instead of the Oldroid Twrp.
I was afraid of messing my good working TWRP setup and decided to try what N01tra user suggested.
It worked like a charm! Thanks again!
Click to expand...
Click to collapse
that's fine too I'm glad it worked good for you!
Have a nice day!
Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.
+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.
Hey hey hey !!! I'm back for a new method, for flash Magisk without patched_boot.img or select current-slot etc, just by do 2 things. And it works for all phone version, Sable, Beta.... ( We use TWRP temporarily, so after the process, TWRP is gone)
Credits :
Me for the idea.
@Frustrated Indian the tester.
@TingyiChen for this nice TWRP.
Code:
Your warranty is now void.
We are not responsible for bricked devices, bootloop... Please
do some research if you have any concerns about features
included in this GUIDE before using it! YOU are choosing to
make these modifications.
Of course first you must have the drivers installed on your pc. And an unlocked bootloader + unlock critical partition, if it is not, follow this procedure :
1. Installing drivers & Preparing PC
- Download this and extract it
- Open and install "adb-setup-1.4.3.exe"
- When it is done, go to "Drivers" folder and start "miflash_unlock.exe"
- Click on the gear icon top right corner and click on "Check" next to "Click the button to install the drive"
- Do as the installer says
- Hopefully the drivers has been installed so we're done with it, let's head on the next step.
2. Preparing phone for unlocking
- On your phone navigate to Settings->System->About phone and tap the build number until you see "You are developer"
- Go back once and you'll see a new menu called "Developer options"
- Tap on it and search an option called "OEM Unlocking", enable it
- We're done here. Let's keep going
3. Entering fastboot and unlocking bootloader (MAKE A BACKUP of your data!)
- Hold your power button down, tap on restart and hold your volume DOWN button while it resets until you see the Mi bunny doing its thing
- Now we're in Fastboot mode, hooray
- Download this zip and extract it on your PC
- Open it and type "cmd" (without the quotations) in the file manager header where you see (This computer>somethingsomething>Mi A2 fastboot), don't be afraid just type it in, and hit enter and you'll enter into command prompt
- Now we are ready for action
- Type these commands one by one:
fastboot flashing unlock
fastboot flashing unlock_critical
- And follow phone on screen steps to validate unlock bootloader...
After this, you will see a warning message that your bootloader is unlocked and your data is not safe, blah blah... Just ignore it everytime you power on your phone.
Downloads :
- TWRP here
- Magisk Latest Beta / Stable (if you prefer) zip
- Magisk Uninstaller zip
Steps :
- Download TWRP
- Copy it to your pc adb folder
- Rename it to twrp.img
- Download Magisk Installer
- Download Magisk Uninstall
- Place these 2 folders on your phone storage
- Reboot phone to fastboot
- Open fastboot command prompt on your pc
- Type "fastboot boot twrp.img" without quotes
- Your phone will boot twrp
- Decrypt data with your pin if needed
- Click install and select the Magisk Installer zip, swipe to confirm
- Wait for the process
- Reboot
That's it !! You now have root on your phone, and TWRP is gone.
If you have issues you can uninstall Magisk with the Uninstaller zip.
For OTA just uninstall Magisk using Magisk Manager, by flash the stock boot.img to your current-slot, or using the zip and flash it like the Magisk Installer.
Check my other thread, Part 3 : OTA for more informations.
-reserved-
I always thought this method was all we needed to do even with the A/B thing... Is this a custom magisk zip?
After installing the October ota: installing magisk caused a boot loop. Switch to this kernel and install magisk again and everything should work.
https://forum.xda-developers.com/mi-a2/development/kernel-hex-t3855773
Magisk link not work.
kishd said:
After installing the October ota: installing magisk caused a boot loop. Switch to this kernel and install magisk again and everything should work.
https://forum.xda-developers.com/mi-a2/development/kernel-hex-t3855773
Click to expand...
Click to collapse
is that what happened to you, or is that what you heard? the testers did not encounter any problem without hex. Plz don't do pub for other thread.
SpectraFun said:
Magisk link not work.
Click to expand...
Click to collapse
Fixed. sorry it was an issue when we click links using XDA phone app. Have a nice day.
Matteo
Adairo said:
I always thought this method was all we needed to do even with the A/B thing... Is this a custom magisk zip?
Click to expand...
Click to collapse
nope, this is just the latest Zip. i can explain you how my method work. when you fastboot boot TWRP.img , the TWRP will automatically boot on your current slot. and when you flash the magisk zip it will automatically flash the zip on your current slot, ( for exemple if your current slot is b, in the past you should flash magisk_b, but no TWRP will automatically temp boot on slot b, so mgisk will automatically be installed on b. and that's it. ).
Atlas/ML said:
is that what happened to you, or is that what you heard? the testers did not encounter any problem without hex. Plz don't do pub for other thread.
Click to expand...
Click to collapse
This happened to me. Even with flashing back the original kernel I could not boot. Flashing the alternate kernel solved my issue and it's much smoother than stock. Not advertising but it seems that the dtb is changed in some way by patching with magisk and an alternate kernel bypasses that issue to allow booting. In my opinion.
kishd said:
This happened to me. Even with flashing back the original kernel I could not boot. Flashing the alternate kernel solved my issue and it's much smoother than stock. Not advertising but it seems that the dtb is changed in some way by patching with magisk and an alternate kernel bypasses that issue to allow booting. In my opinion.
Click to expand...
Click to collapse
flash stock kernel has no sense. that's why it doesn't work. if you have issue you should just flash boot.img or flash magisk uninstaller in twrp like magisk zip. sometime hex kernel cause some issues . for me with all version tested, with help of the maintainer @draco I'm not able to boot fine. I have a green glitchy screen etc, and after some boot my device screen stuck on black screen.
works fine, thank you!
bavmouse said:
works fine, thank you!
Click to expand...
Click to collapse
I'm glad to hear it, enjoy
Atlas/ML said:
nope, this is just the latest Zip. i can explain you how my method work. when you fastboot boot TWRP.img , the TWRP will automatically boot on your current slot. and when you flash the magisk zip it will automatically flash the zip on your current slot, ( for exemple if your current slot is b, in the past you should flash magisk_b, but no TWRP will automatically temp boot on slot b, so mgisk will automatically be installed on b. and that's it. ).
Click to expand...
Click to collapse
I'm gonna try to get Xposed working with this method, if it fails I'll try another one used on pixel 2
Adairo said:
I'm gonna try to get Xposed working with this method, if it fails I'll try another one used on pixel 2
Click to expand...
Click to collapse
I recommend you to use magisk and install systemless xposed.
Atlas/ML said:
I recommend you to use magisk and install systemless xposed.
Click to expand...
Click to collapse
I've heard about Xposed from magisk brings a bootloop... I already installed Hex kernel so I don't mind to modify system partition
Adairo said:
I've heard about Xposed from magisk brings a bootloop... I already installed Hex kernel so I don't mind to modify system partition
Click to expand...
Click to collapse
okay, give me results if it works. good luck
Atlas/ML said:
okay, give me results if it works. good luck
Click to expand...
Click to collapse
*Xposed from magisk = bootlop
*flashed Xposed.zip from twrp = bootlop
*install xposed from Pixl 2 method: https://www.themefoxx.com/2018/01/xposed-for-pixel-2-xl.html = bootlop
I guess we'll have to wait a bit longer to get xposed working on our A/B partition device
Adairo said:
*Xposed from magisk = bootlop
*flashed Xposed.zip from twrp = bootlop
*install xposed from Pixl 2 method: https://www.themefoxx.com/2018/01/xposed-for-pixel-2-xl.html = bootlop
I guess we'll have to wait a bit longer to get xposed working on our A/B partition device
Click to expand...
Click to collapse
hum, interesting
I'm on September update and want to update to the October one, I've tried doing everything in Part 3 but no success. Any solution that let me keep my data?
Adairo said:
*Xposed from magisk = bootlop
*flashed Xposed.zip from twrp = bootlop
*install xposed from Pixl 2 method: https://www.themefoxx.com/2018/01/xposed-for-pixel-2-xl.html = bootlop
I guess we'll have to wait a bit longer to get xposed working on our A/B partition device
Click to expand...
Click to collapse
Xposed will not work untill we get a deodexed stock rom or custom rom
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Worked !!!
Thank you dear. Its worked for mine in p585 oreo android....
Anyone can search mcmilk 7zip in google and download program to extract boot.img.lz4 and get boot.img :good:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Latest twrp dose not worked on my device but this solution work fine
I can confirm that this method does work. I used it on my SM-P580 yesterday. I would suggest that you first backup your all of your apps, contacts, photos, etc using SmartSwitch. You will need to restore everything after the tablet tells you that it needs to be reset because it wipes everything. After the restore, you will need to enter all of your accounts and passwords again but at least all of the data will be back.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
Im not sure if this post belongs here, you link to the T580 TWRP, not the P580.
Is that one compatible with P580?
nill3bor said:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Click to expand...
Click to collapse
If I do this, will I be able to mount my SD Card as internal storage? 16gb just isnt enough on this tablet.
Do you have to be on oreo already for this to work I'm still on 7.0 and with my system modified I can't upgrade normally
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
This one worked for me on a P585Y. You just have to skip the steps below.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
Click to expand...
Click to collapse
It will also show on the Device Maintenance, just ignore the warning.
You can freeze some of the system apps to prevent it from showing on the notification again.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Hello Gyus,
I managed to root the device with the method posted by @amosdinh (Thank you so much). Now I'm trying to configure adoptable storage. So far I didn't achieve this goal. ADB commands doesn't work and I can't install the ASPlugin.zip needed by Root Essentials to set adoptable storage by the app.
TWRP for P585 is corrupted, gives blue/red lines screen. The dev that maintains the code is absent since march. I'm out of luck on this. If anyone have a idea to get adoptable storage on this device while using Oreo, please comment.
Thanks!
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
artaeun said:
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Click to expand...
Click to collapse
Just renaming magisk_patched.img to boot.img and adding to .tar file by 7zip worked for me.
We should ask a dev to update twrp for android 8.1
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
Same freeze for me with the Omni - can't do anything outside of access download mode
Same Problem
cmzizi said:
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
Click to expand...
Click to collapse
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
Really wish this wasn't the case. I'd actually keep this thing if it had a working TWRP.
On my SM-P580 I used Odin and TWRP I don't get the black screen but when I reboot to get into TWRP recovery mode it shows the padlock and says swipe to unlock. Tried many times bit cannot swipe and cannot get past this. All I want is to be able to use the SD card as internal storage. HELP???? Thanks!!
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
thanks in advanced
where can i find stock firmware?
I've just installed magisk using TWRP via command line. P580
I've just installed magisk using TWRP via command line.
Read the entire post before trying this yourself.
I installed the latest TWRP, the one that bugs and doesn't display anything, this allows to root without wiping data. I'm running the latest korean firmware for P580.
Just do this:
1. Launch TWRP and INMEDIATELY LOCK YOUR SCREEN. (I got ghost stripes that disappeared after 2 days when testing this, work with low light so you can notice your screen whenever it tuens on) Please don't forget this point, don't [temporarily] damage your screen as I did.
2. adb push Magisk-v[Current version].zip external_sd
3. adb shell
4. twrp install external_sd/Magisk-v[Current version].zip
After this you just need to install MagiskManager-v[Current version].apk and you will be all done.
But there is one thing...
If you ever get into recovery mode, there is no way out without using adb as far as I know. You can launch download mode and cancel it but you'll boot back to TWRP.
When in twrp touching your screen or any button will wake the device up and will start burning the ghost image to your screen.
So if you know of a method for rebooting to system without using adb, please let me know.
Also a solution for this would be to flash back the stock recovery, wich may or may not force to wipe system, that something that needs to be tested tho.
Update: Ok so, you can use a handy tool called MTKroot on recovery.img.lz4 to get recovery.img, then use 7z to pack it into a tar file and flash that tar file with odin (AP, same as TWRP)
This way you will not have a 0.001% chance of random boot into recovery mode and damage your screen