I have a N7 that is stock rooted. It has TWRP installed and I would like CWM on it as I'm more comfortable with it, can I just flash CWM or will it cause problems?
just flash the recovery image with fastboot and you'll be fine
You can also do it directly from ROM Manager App. Just select what recovery you want and reboot.
Sent from my Galaxy Nexus using xda app-developers app
I was trying to install CWM for Galaxy Y(via .zip) which was successful but whenever I boots into recovery mode it boots to stock recovery rather than CWM. I have tried installing two CWM .zip files but both show same result.
P.S Can I flash Galaxy Gio's CWM on Galaxy Y?
Sent from my GT-S5360 using xda app-developers app
mjobanjatt said:
I was trying to install CWM for Galaxy Y(via .zip) which was successful but whenever I boots into recovery mode it boots to stock recovery rather than CWM. I have tried installing two CWM .zip files but both show same result.
P.S Can I flash Galaxy Gio's CWM on Galaxy Y?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
why are you repeating the question it is already answered in your last post
anyways there are two types of cwm
temporary cwm - you have to flash it from stock recovery to get cwm ( the one you are using now)
permenant cwm - which replaces stock recovery
to get a permanent cwm you have to install a kernel which has an integrated cwm with it
Use only Galaxy y's CWM
ClockWorkMod Recovery is temperory if you flash it via stock.
Permanent CWM comes with the kernel. So flash a kernel that has CWM replacing stock recovery.
DONT FLASH CWM THAT WAS NOT MADE FOR YOUR DEVICE.
Dont use CWM of Galaxy Gio.
P.S. Dont repeat questions and spam the forum.
How did you guys managed to flash Phil's CWM? There were 3 TWRP thread guide for LG G2. What did you use and what method before flashing Phil's? I hope he'll release a flashable img for his CWM.
Use this one it super easy. After that flash Philz from TWRP.
http://forum.xda-developers.com/showthread.php?p=45713343
Sent from my VS980 4G using XDA Premium HD app
You used option 2?
You can flash CWM from TWRP?
Can i use this one? Seems easier than with adb
I used flashify and flashed thru twrp
Sent from my LG-LS980 using xda app-developers app
pintopunk said:
I used flashify and flashed thru twrp
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
Can you send the twrp link u just used? Thanks.
I flashed TWRP first, then from within there flashed Philz, and it works perfectly. Now I can store my backups using USB-OTG. Perfect!
marshygeek said:
You used option 2?
Click to expand...
Click to collapse
I used option 1. Easier is not always better. Option 1 is the safest way.
RPAusCan said:
I flashed TWRP first, then from within there flashed Philz, and it works perfectly. Now I can store my backups using USB-OTG. Perfect!
Click to expand...
Click to collapse
Which method did you use?
marshygeek said:
Which method did you use?
Click to expand...
Click to collapse
I first downloaded and installed "Recovery Tools", from here: http://forum.xda-developers.com/showthread.php?t=2334554
I then downloaded TWRP for my phone from here: http://forum.xda-developers.com/showthread.php?t=2501444. I only used this link to find TWRP
for my phone (Canadian D803). I didn't actually follow the directions on this page.
Once I had the TWRP .img file, I used Recovery Tools to flash TWRP.
I then downloaded PhilZ Touch Recovery from here: http://forum.xda-developers.com/showthread.php?t=2554053
I booted into TWRP Recovery and from there, flashed PhilZ Recovery. From that point on, when I boot into recovery, I get into PhilZ instead of TWRP.
I still haven't figured out how to boot into recovery using the power/volume buttons. I've tried a few times and I can't get it to work. However, Recovery Tools has a reboot option, and that works great for now. Of course, if I get into trouble and can't access this app, that option is gone
*Edit* I finally learned how to boot into recovery using the power/volume buttons! :victory: I followed the instructions given by bodom_hc here:
http://forum.xda-developers.com/showthread.php?p=48253191#post48253191
I hope this helps.
RPAusCan said:
I first downloaded and installed "Recovery Tools", from here: http://forum.xda-developers.com/showthread.php?t=2334554
I then downloaded TWRP for my phone from here: http://forum.xda-developers.com/showthread.php?t=2501444. I only used this link to find TWRP
for my phone (Canadian D803). I didn't actually follow the directions on this page.
Once I had the TWRP .img file, I used Recovery Tools to flash TWRP.
I then downloaded PhilZ Touch Recovery from here: http://forum.xda-developers.com/showthread.php?t=2554053
I booted into TWRP Recovery and from there, flashed PhilZ Recovery. From that point on, when I boot into recovery, I get into PhilZ instead of TWRP.
I still haven't figured out how to boot into recovery using the power/volume buttons. I've tried a few times and I can't get it to work. However, Recovery Tools has a reboot option, and that works great for now. Of course, if I get into trouble and can't access this app, that option is gone
*Edit* I finally learned how to boot into recovery using the power/volume buttons! :victory: I followed the instructions given by bodom_hc here:
http://forum.xda-developers.com/showthread.php?p=48253191#post48253191
I hope this helps.
Click to expand...
Click to collapse
How in TWRP did you flash the PhilZ Recovery. I have used the "Flash Zip" file option and when when I boot back into recovery I still get TWRP?
Jimi Mack said:
How in TWRP did you flash the PhilZ Recovery. I have used the "Flash Zip" file option and when when I boot back into recovery I still get TWRP?
Click to expand...
Click to collapse
I did the same thing. I chose "Install" in TWRP and selected PhilZ recovery. After reboot, PhilZ just came up by default. I didn't do anything else myself - I'm pretty new to this. Did I just get lucky?
I have an international LG G2. I'm trying to update it to CM 11, but my CWM recovery is version 6.0.4.0 and I need 6.0.4.4. I tried updating through ROM Manager, but every time I boot into CWM, it's still version 6.0.4.0. I tried to use ROM Installer, but came across an error. I tried using Flashify to update CWM by manually downloading the CWM recovery image online, but also came across an error. Would really like to fix this problem.
I'm also having this issue on the ATT model, with the "6.0.4.5 CWM-based recovery" that came with Freegee. Trying to get the legit CWM 6.0.4.4 to flash and I can't do it.
Grab the zip file. Boot into recovery and install the zip. Never user rom manager ut doesn't work well with this phone
Sent from my LG-D800 using Tapatalk
tdevaughn said:
Grab the zip file. Boot into recovery and install the zip. Never user rom manager out doesn't with with this phone
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Zip file? I can only find the img files on CWM's official website. I tried to use Flashify to install that, but when trying to boot into recovery, the phone got stuck at bootup and I had to hard reset it and it went back to normal with the recovery still at 6.0.4.0 unfortunately.
Been using Phil's recovery lately it is built off of cwm . http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d800
Sent from my LG-D800 using Tapatalk
HOw to flash :
download mobile uncle tools from play store
place the recovery.img in root of sd card
goto recovery update
now select recovery image
and flash it
now reboot in recovery
download links :
CWM
Sir i select recovery img and go to recovery mode bt the ph only show android system recovery.not in cwm pls help me
Sent from my Micromax A120 using XDA Premium 4 mobile app
Not working
I tried this but it rebooted in the android system recovery as well. Help me please. I rooted my phone with kingoroot but I don't have a custom recovery and the superSU app. I need one !