Hi !
I just bought a head unit I founded on AliExpress :
http://www.aliexpress.com/item/Quad...dition-Edge-Fusion-F150-F500/32344021566.html
This one is especially compatible with Ford cars, and it works pretty well with my 2005 Mustang GT.
Here is some informations :
Model n° : S07
MCU : MTCB-KGL-V2.55
Android version : 4.4.4_01062015
Kernel : 3.0.36++
Build number : rk3188-eng4.4.4 01062015.15:09:11
CPU : armv7 1.6GHz (x4)
RAM : Samsung DDR3 1GB
Internal storage : 16Gb
Screen : 1024*600
I founded some issues :
sometimes the storage does not mount at boot (internal / GPS card / Sd card). It's ok if I reset the unit
my android phones are not detected by the head unit (OnePlus and Micromax). They can be charged, but nothing more appens, so it's impossible to try the "mirror link".
Otherwise, it's fine. The audio quality is quite good, my reverse camera is switched on automatically (with the can-bus adapter).
The factory settings are accessible with the usual password "126".
It's seems to be the same as this one : Seicane S127302
http://www.seicane.com/fr/seicane-s...h-3g-wifi-bluetooth-rearview-mirror-lien-obd2
Hardware and software are the same
Related
Hello from France,
I just bought a KC BX-411 Android 6.0 head unit on aliexpress, I found the manufacturer with the name , it is a KC Cartech product www_kccartech_com/eacp_view.asp?id=226 , I’m very happy with it except that I can not pair my OBDLink LX OBD adapter.
No problem with bluetooth to connect a phone and it works, the only problem is for the obd adapter, only one chinese model of a friend is working and it have to be named "OBDII" and have MAC Address (identity card) : AA:BB:CC:11:22:33 , it is the generic chinese typical OBD but the problem is that mine has a different name and obviously another MAC Address and the car radio can't pair it (see video) , It seems that the firmware of the car radio is locked to use only a generic chinese "OBDII" with MAC Address : AA:BB:CC:11:22:33. It has been confirmed by a friend who have a android car radio too with same problem and had to replace the original firmware by a sda developer firmware update to solve the problem.
Do you have a firmware update to upload in the car radio to replace mine to be able to connect any OBD adapter ?
ANTUTU Benchemark v6.2.7 (Score 19695):
CPU Allwinner T3 Cortext A7 Quad Core 1.2GHz
RAM DDR3 1GB INAND 16GB
Android 6.0.1 (32bits) SDK 23
Renderer Mali-400 MP2
GPU OpenGL ES 2.0
screen 800x480 (240dpi)
RAM 752MB
HDD 3,87GB
HDD 7,51GB
Thanks,
PIFOUBMW
Same problem as well...
Were you able to find ny solution to this?
No
From OBDLink support Forums:
You can try renaming your OBDLink with the command STBTDN.
Once connected, you can issue the command "STBTDN OBD". You will then have to power cycle the unit. Once it powers up the device should now broadcast as "OBD".
You can also try changing the Class of Device with the command STBTCOD.
Once connected, you can issue the command "STBTCOD 200400". You will then have to power cycle the unit.
Hi,
Do you have a link to that or to instructions on how to send the command to the OBDLink LX?
Thanks.
marchnz said:
From OBDLink support Forums:
You can try renaming your OBDLink with the command STBTDN.
Once connected, you can issue the command "STBTDN OBD". You will then have to power cycle the unit. Once it powers up the device should now broadcast as "OBD".
You can also try changing the Class of Device with the command STBTCOD.
Once connected, you can issue the command "STBTCOD 200400". You will then have to power cycle the unit.
Click to expand...
Click to collapse
PIFOUBMW said:
Hello from France,
I just bought a KC BX-411 Android 6.0 head unit on aliexpress, I found the manufacturer with the name , it is a KC Cartech product www_kccartech_com/eacp_view.asp?id=226 , I’m very happy with it except that I can not pair my OBDLink LX OBD adapter.
No problem with bluetooth to connect a phone and it works, the only problem is for the obd adapter, only one chinese model of a friend is working and it have to be named "OBDII" and have MAC Address (identity card) : AA:BB:CC:11:22:33 , it is the generic chinese typical OBD but the problem is that mine has a different name and obviously another MAC Address and the car radio can't pair it (see video) , It seems that the firmware of the car radio is locked to use only a generic chinese "OBDII" with MAC Address : AA:BB:CC:11:22:33. It has been confirmed by a friend who have a android car radio too with same problem and had to replace the original firmware by a sda developer firmware update to solve the problem.
Do you have a firmware update to upload in the car radio to replace mine to be able to connect any OBD adapter ?
ANTUTU Benchemark v6.2.7 (Score 19695):
CPU Allwinner T3 Cortext A7 Quad Core 1.2GHz
RAM DDR3 1GB INAND 16GB
Android 6.0.1 (32bits) SDK 23
Renderer Mali-400 MP2
GPU OpenGL ES 2.0
screen 800x480 (240dpi)
RAM 752MB
HDD 3,87GB
HDD 7,51GB
Thanks,
PIFOUBMW
Click to expand...
Click to collapse
I have the same issue, I found that the issue is with the Bluetooth Module (Chip) itself.
You need to check the Bluetooth Module# manually. If you have bluetooth module RDA 5850SM then you need to go through this process CLICK HERE (Credits @****-jones )
rizu3544 said:
I have the same issue, I found that the issue is with the Bluetooth Module (Chip) itself.
You need to check the Bluetooth Module# manually. If you have bluetooth module RDA 5850SM then you need to go through this process CLICK HERE (Credits @****-jones )
Click to expand...
Click to collapse
hello,
do you know where i can find the files of the russian forum (goc.rar)?
it seems that the link is dead
thnk you
nirudha said:
Hi,
Do you have a link to that or to instructions on how to send the command to the OBDLink LX?
Thanks.
Click to expand...
Click to collapse
I know this is old but I just got my OBDLink mx to work with the android head unit
You need to change the class of device to 001f00.
You can follow this instructions here. I had to use my laptop to make the changes with obdwiz and then power cycle the OBDLink mx.
https://www.scantool.net/forum/index.php?topic=15863.0
Hello!
I am having trouble updating my MCU. I've been randomly losing this driver for a while now. After starting the car, the radio has a problem with starting (android works fine, no sound from the radio) when the MCU starts, the version is unknown. After 5 minutes, the device resets, sometimes the MCU will load and everything works until the car is turned off again.
During the update (SD Card FAT32, empty only with the original files from the joying blog - Trying few others), the information that SDCARD cannot be mounted
It goes to the line where the STM32UD was updated correctly, then the line with the description: "2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0" - the device is locked here, nothing happens - after 5 minutes, restart the device and loop.
How the device works properly MCU Version is:
2019.09.07 10:40:57 JY_53_C63L_H32P48F64_Ver: 1.0
Any factory reset not working.
CPU Info:
Intel X86_Octa-Coire 1.8Ghz [email protected] + 32 GB
Android 8.1
What should I do, what file should I use? Radio is:
Joying JY-UO135N4G
I don't speak perfect English, I use a translator. For thorough help, sending any files, I am able to use a grant. I am asking for help in solving the problem.
I am asking for information which data is still needed to solve the problem. The device is rotated.
After struggling to start the device, I did not have an MCU, I used Joying Extra Tool and the option -Rebot Option - Soft Reboot (Gui only, sufficient for all apk replacements)
After starting the car, the panel LEDs light up for 2 seconds and then they turn off, the device usually starts after a few minutes, the vehicle's logo is displayed with a countdown from 5 to 0, the device stops on the number 0. I have to hold power off and manually reset the device, then Andorid is charging correctly.
Twice after using it, the device started working properly. The MCU showed up in the settings.
System info:
Kernel: #451 SMP PREEMPT FRI MAR 29 2019
Platform: (24)6313 LF Full band carplay
touch: 911_1060(263efcda)E:0
APP 1024x600 2019-11-28 15:50:42
System 2019-11-28 09:40:06 Thursday
I have just installed a new headunit into my Kia. Everything works fine except wifi which I cannot manage to turn on. When I try turning it on it immediately turns off. Bluetooth works normally. I have tried restarting the unit, clearing cache, deleting wifi information.. everything to no avail. Does anyone know what I can do?
Thanks.
This is the exact headunit: https://www.amazon.de/dp/B08BK3XYFJ...t_i_ACPKTSHG3PB4ZVK86NEV?_encoding=UTF8&psc=1
About machine
Build number: 202106011022
Kernel version: 4.19.111
#231 Fri 05 28 11:32:21 CST 2021
uboot-05 11 2021-17:51:59_M11 1280X720
MCU version:
CSN2_04282021_173906_V102
CPU and Memory size:
64-Bit 8-Core Cortex-A53 1.5 GHz
4GB
Model and hardware:
Model: PX5
Android version:10
SIM STATUS: not availible
IP address: unavailible
Wi-Fi MAC address: unavailible
WorriedMushroom said:
I have just installed a new headunit into my Kia. Everything works fine except wifi which I cannot manage to turn on. When I try turning it on it immediately turns off. Bluetooth works normally. I have tried restarting the unit, clearing cache, deleting wifi information.. everything to no avail. Does anyone know what I can do?
Thanks.
This is the exact headunit: https://www.amazon.de/dp/B08BK3XYFJ...t_i_ACPKTSHG3PB4ZVK86NEV?_encoding=UTF8&psc=1
About machine
Build number: 202106011022
Kernel version: 4.19.111
#231 Fri 05 28 11:32:21 CST 2021
uboot-05 11 2021-17:51:59_M11 1280X720
MCU version:
CSN2_04282021_173906_V102
CPU and Memory size:
64-Bit 8-Core Cortex-A53 1.5 GHz
4GB
Model and hardware:
Model: PX5
Android version:10
SIM STATUS: not availible
IP address: unavailible
Wi-Fi MAC address: unavailible
Click to expand...
Click to collapse
Unfortunately, this is a common problem. If you recently bought the unit - return it. The issue is with faulty hardware.
Do you have the head unit's hotspot turned on? You can't run HOTSPOT and WIFI at the same time.
Dear sirs,
I bought an android GPS Radio for Rneault/Dacia Sandero on Aliexpress
But I have problems with this radio :
1/ Radio recognize only One of the 3 USB outputs : the 4 pins USB. The 6 pins USB is not recognzed
2/ system emulates an USB Key vith 48 Go. If I connect an USB cable on 6 pins USB, this emulated USB key disappears
3/ There are many troubles with RDS Radio function : radios are found with AF/TA signal, but sometimes the radio doesn't accept AF signal and jump to another radio station or freezes.
System has 2 Go Internal memory and 64 Go stockage memory, and processor is a four-core processor.
I would find another firmware.
The actually firmware is : ZXDZ_2+64 AC8227L_2022.04.25.16
I want know if existing another firmware, totally wrote in French or in English (because actuallt some menus are in Danish, Finnish or Norvegian, I don't really know, but I don't understand)
Please could you help me.
If there is no newer ou compatible firmware, is it possible to modify software RDS function and USB ? (And If we could have only one enormous 64 Go disk...
Many Thanks
(Sorry for ma bad english, I'm French and I speak English just a little)
Post Android system information including MCU version
My actual firmware
Hello,
This system come with a AC8227L processor, 2 Go RAM and 64 Go storage memory
Canbus is active (Canbud Renault/Dacia)
Android version is Android 10
Many Thanks (sorry I've writing another message for my problem because I couldn't refund my first message, so if moderation could do it, please merge my two messages)
Hi, I have the above unit and was send a link for a new boot from SD, I have copied files to SD card but the supplyer says to press the on/off button while booting, this unit does not have any buttons and is all touch screen, how can i boot from the SD card please
Is the unit an MTCD device, post Android system information including MCU.
please can you tell me what mtcd stands for and MCU, what am i looking for, the unit is android11 PX5, ERISIN 8 Core Android 10.0 Car Stereo for Fiat Ducato Peugeot Boxer Citroen Jumper Support Carplay Android Auto GPS Sat Nav DSP Wifi DAB+ TPMS 4GB RAM , Erisin 8774D
richsemc said:
please can you tell me what mtcd stands for and MCU, what am i looking for, the unit is android11 PX5, ERISIN 8 Core Android 10.0 Car Stereo for Fiat Ducato Peugeot Boxer Citroen Jumper Support Carplay Android Auto GPS Sat Nav DSP Wifi DAB+ TPMS 4GB RAM , Erisin 8774D
Click to expand...
Click to collapse
Post Android system information (from android) including MCU version.
hi, i am unable to boot from sd as my erisin es8774d unit does not have any push buttons, also i need the developer code, i have tried the following without sucess.
kernal 4.19.111 / mcu CSM4_D_R7708_06222022_155441 / CPU 64BIT 8 CORE CORTEX-A53 1.5GHZ / MODEL PX5 / ANDROID 11
CODES TRIED SO FAR
1983
6688
123456
111333
1617
66668888
16176699
126
m12356
1234
8888
110
126
162
168
518
888 (Boot Logo)
0000
1111
1234
1314
1368
1464
1617
1912
1983
3234
3366
3368
3506
3711
5678 (Boot Logo)
5768
5839
6688
7749 (Boot Logo)
7788
7866
7890
8086 – Launcher
8317
8861
8888
12345
12356
12580
56789
77049
000000
110126 (Boot Logo)
111333
121212
123456
190627
667788
888666
888888
16176699
66668888
richsemc said:
hi, i am unable to boot from sd as my erisin es8774d unit does not have any push buttons, also i need the developer code, i have tried the following without sucess.
kernal 4.19.111 / mcu CSM4_D_R7708_06222022_155441 / CPU 64BIT 8 CORE CORTEX-A53 1.5GHZ / MODEL PX5 / ANDROID 11
CODES TRIED SO FAR
Click to expand...
Click to collapse
Not MTCD, requested moderator move to (Android head-units) forum.
Op try search
Search results for query: CSM4
forum.xda-developers.com