Database Users

[FTF File] SGP511 xperia z2 tablet - 17.1.1.A.0.402 Generic CA WIFI

SGP511 - Xperia Z2 TABLET WIFI - GENERIC CA FTF FILE
Android version: 4.4.2
Build number: 17.1.1.A.0.402
Tablet Software Version: 1278-4514_17.1.1.A.0.402 WIFI User
File System Version: GLOBAL_WIFI16G_17.1.1.A.0.402
Customization Version: 1281-7810_R5A
Branding: Generic CA (unbranded)
Country: Canada
Click to expand...
Click to collapse
Note: I've tested this on mine and it seems fine, would appreciate if anyone else can test it to reconfirm, thank you.
Note 2: DO NOT CROSS FLASH THIS WITH THE LTE XPERIA Z2 TABLET. This is made for the WIFI verison of Xperia Z2 Tablet ONLY.
Downloads
Note: Sorry for so many different parts, stupid box does not allow me to upload large files.
Note 2: There are a total of 5 files, please download them all then unzip them with winrar.​

Yes! It works for me Device from SG

LitoNi said:
SGP511 - Xperia Z2 TABLET WIFI - GENERIC CA FTF FILE
Note: I've tested this on mine and it seems fine, would appreciate if anyone else can test it to reconfirm, thank you.
Note 2: DO NOT CROSS FLASH THIS WITH THE LTE XPERIA Z2 TABLET. This is made for the WIFI verison of Xperia Z2 Tablet ONLY.
Downloads
Note: Sorry for so many different parts, stupid box does not allow me to upload large files.
Note 2: There are a total of 5 files, please download them all then unzip them with winrar.​
Click to expand...
Click to collapse
Any chance someone still has this ftf? I borked my z2 tab today and was looking for the latest firmware to flash that is still rootable. Think this is it. Endpoint will be running cm11 or cm12.

bacon612 said:
Any chance someone still has this ftf? I borked my z2 tab today and was looking for the latest firmware to flash that is still rootable. Think this is it. Endpoint will be running cm11 or cm12.
Click to expand...
Click to collapse
download this buddy: XperiFirm ~ Xperia Firmware Downloader & Checker [v3.1]
no one uploads stock ftf files anymore, it can all be downloaded from that software :highfive:

LitoNi said:
download this buddy: XperiFirm ~ Xperia Firmware Downloader & Checker [v3.1]
no one uploads stock ftf files anymore, it can all be downloaded from that software :highfive:
Click to expand...
Click to collapse
Thank you for this. I managed to get a Chinese 402 fimware downloaded, created an ftf out of it and flashed it successfully. Would be more helpful if this wasn't a Chinese build but its a start.
Edit: I chose 402 as its the latest firmware that is supported by doomlord root and recovery. The endpoint is to be back on CM11/12. Having a tough time as im not able to boot to recovery from the Chinese build. Also seems that there is a possible hardware issue as I am having intermittant connectivity issues with the tablet. It seems to come in and out of flash mode on its own in the flashtool. I am trying to flash a different firmware but it wont stay in flash mode long enough for the firmware flash to complete successfully. Pretty frustrating. I noticed this usb issue while using chargers over the last month or so too. Tablet would show that it was charging for a second then not charging intermittently. I thought it could be rom related which inspired the want to ftf back to stock but i think that there is something physically wrong with this tab now. Shame as its only six months old and was barely used.

bacon612 said:
Thank you for this. I managed to get a Chinese 402 fimware downloaded, created an ftf out of it and flashed it successfully. Would be more helpful if this wasn't a Chinese build but its a start.
Edit: I chose 402 as its the latest firmware that is supported by doomlord root and recovery. The endpoint is to be back on CM11/12. Having a tough time as im not able to boot to recovery from the Chinese build. Also seems that there is a possible hardware issue as I am having intermittant connectivity issues with the tablet. It seems to come in and out of flash mode on its own in the flashtool. I am trying to flash a different firmware but it wont stay in flash mode long enough for the firmware flash to complete successfully. Pretty frustrating. I noticed this usb issue while using chargers over the last month or so too. Tablet would show that it was charging for a second then not charging intermittently. I thought it could be rom related which inspired the want to ftf back to stock but i think that there is something physically wrong with this tab now. Shame as its only six months old and was barely used.
Click to expand...
Click to collapse
wooo bad luck buddy, you should take it back to sony while you still got the chance (under warranty). If you have saved the DRM keys before unlocking the bootloader, you should relock it and flash a stock ftf (Canadian version). i dont know why the OP link doesnt work. but i had just checked my box account and the files are still there the .402 one
SGP511 Wifi Generic CA .402: https://app.box.com/s/o3webtra06yvet2zuva47vka3h981s4l
if the link does not work you either have to create a Box account or give me your email. i dont know why Box is like this.
gl buddy :highfive:

Thanks for the support
I tried again with the box link and it says: "the item you are trying to access has been deleted or is unavailable to you" Ill PM you my address.

Hello all,
I need this FW to flash the kernel of this thread (for CWM recovery + root) :
http://forum.xda-developers.com/showthread.php?p=51690786#post51690786
The link is invalid and I can't find the FTF file elsewhere.
Someone has a link? Thanks.

[FTF][Z4/Z3+] Stock ROM E6553, SOV31, 402SO, SO-03G

​
>>>CDA<<<
1294-9967: Vietnam - Customized VN
1295-7703: United Kingdom - Customized UK
1294-9654: Hong Kong - Customized HK
1293-2805: Japan - SoftBank JP
1295-9819: Japan - NTT DoCoMo JP
1294-4301: Japan - KDDI JP
>>>DOWNLOAD<<<
Flashtool 0.9.18.6
Z3+ E6553
E6553_28.0.A.4.8_1295-7703_R6A_ChoiMobile.VN.ftf
E6553_28.0.A.4.8_1294-9967_R5A_ChoiMobile.VN.ftf
E6553_28.0.A.4.8_1294-9654_R9A_ChoiMobile.VN.ftf
Z4 (SOV31)
SOV31_28.0.D.5.9_1294-4301_R15A_ChoiMobile.VN.ftf
Z4 (402SO)
402SO_28.0.C.3.16_1293-2805_R19A_ChoiMobile.VN.ftf
Z4 (SO-03G)
SO-03G_28.0.B.0.457_1295-9819_R9A_ChoiMobile.VN.ftf
Coming soon...

@Google Drive

#1

Is the any ROM for Xperia Z3+ Dual E6533 ?

Can anyone please post an FTF for E6553 (generic Hong Kong version)? I managed to brick my phone
Edit: Never mind - PC companion repair menu saved the device model in its history, so I'm good for now . But post it anyway if you could as we need to build a good FTF collection

schecter7 said:
Can anyone please post an FTF for E6553 (generic Hong Kong version)? I managed to brick my phone
Edit: Never mind - PC companion repair menu saved the device model in its history, so I'm good for now . But post it anyway if you could as we need to build a good FTF collection
Click to expand...
Click to collapse
1294-9654: Hong Kong - Customized HK
E6553_28.0.A.4.8_1294-9654_R9A_ChoiMobile.VN.ftf

Thanks a lot, Mate! I was reading it as ChinaMobile.ftf - My bad.

Jozinek said:
sorry but make FTF thread without knowledge that Flashtool doesnt support XPERIA Z3+/XPERIA Z4 is not good idea...
Click to expand...
Click to collapse
What can flash a z3+? Also i downloaded the firmware from xperifirm, but it unpacks the file, so what format would i need it in?

acme64 said:
What can flash a z3+? Also i downloaded the firmware from xperifirm, but it unpacks the file, so what format would i need it in?
Click to expand...
Click to collapse
Flashtool isn't supported yet

hasona said:
Flashtool isn't supported yet
Click to expand...
Click to collapse
that wasn't the question

Thx men

hasona said:
Flashtool isn't supported yet
Click to expand...
Click to collapse
I just successfully flashed my Z3+ (E6553) using Flashtool 0.9.18.6 - I used the device drivers of the Z2 (Flashmode Drivers, Fastboot Drivers and both Xperia Z2 Device Drivers).

an3k said:
I just successfully flashed my Z3+ (E6553) using Flashtool 0.9.18.6 - I used the device drivers of the Z2 (Flashmode Drivers, Fastboot Drivers and both Xperia Z2 Device Drivers).
Click to expand...
Click to collapse
few questions...
do you need to have the bootloader unlocked to use flashtool?
Also, I like in the USA and bought the z3+. The current CDA is HK generic which is version .24. I see that the generic UK version is .27. Is there an advantage to put the .27 firmware on the phone?

GCbard said:
few questions...
do you need to have the bootloader unlocked to use flashtool?
Click to expand...
Click to collapse
No. Unlocked Bootloader is just for rooting.
GCbard said:
Also, I like in the USA and bought the z3+. The current CDA is HK generic which is version .24. I see that the generic UK version is .27. Is there an advantage to put the .27 firmware on the phone?
Click to expand...
Click to collapse
The only variants using 28.0.A.7.27 are "Customized UK" and "O2 Pay monthly UK". Every other variant is 28.0.A.7.24 or older. They often did that with the Z2 too and the main reason was because of bugs so I guess they released 28.0.A.7.24 for UK too but noticed some bugs, thus fixed these and released 28.0.A.7.27
28.0.A.7.24 and 28.0.A.7.27 should be the exact same Android version 5.0.2. If it were Android 5.1 or even 5.1.1 they would have used a much higher version number.

an3k said:
No. Unlocked Bootloader is just for rooting.
The only variants using 28.0.A.7.27 are "Customized UK" and "O2 Pay monthly UK". Every other variant is 28.0.A.7.24 or older. They often did that with the Z2 too and the main reason was because of bugs so I guess they released 28.0.A.7.24 for UK too but noticed some bugs, thus fixed these and released 28.0.A.7.27
28.0.A.7.24 and 28.0.A.7.27 should be the exact same Android version 5.0.2. If it were Android 5.1 or even 5.1.1 they would have used a much higher version number.
Click to expand...
Click to collapse
Thank you for your answer. One more question. If I upgrade to the UK generic version 0.27 , will pc companion still work for me in order to upgrade to higher versions as well?
---------- Post added at 04:42 PM ---------- Previous post was at 04:36 PM ----------
an3k said:
No. Unlocked Bootloader is just for rooting.
The only variants using 28.0.A.7.27 are "Customized UK" and "O2 Pay monthly UK". Every other variant is 28.0.A.7.24 or older. They often did that with the Z2 too and the main reason was because of bugs so I guess they released 28.0.A.7.24 for UK too but noticed some bugs, thus fixed these and released 28.0.A.7.27
28.0.A.7.24 and 28.0.A.7.27 should be the exact same Android version 5.0.2. If it were Android 5.1 or even 5.1.1 they would have used a much higher version number.
Click to expand...
Click to collapse
Also, when you run flashtool do you run normal version or 64 version? Not sure if that is in reference to the device or the computer.

GCbard said:
Thank you for your answer. One more question. If I upgrade to the UK generic version 0.27 , will pc companion still work for me in order to upgrade to higher versions as well?
Click to expand...
Click to collapse
I can't say about Z3+ but for Z2 and here it still worked. Maybe Sony changed something with the Z3+ but I don't think so. In short (but without guarantee): yes, it should still work.
GCbard said:
Also, when you run flashtool do you run normal version or 64 version? Not sure if that is in reference to the device or the computer.
Click to expand...
Click to collapse
If your Computer Operating System (Windows / Mac / Linux) is 64-Bit use FlashTool64.exe and if not stick with the FlashTool.exe

an3k said:
I can't say about Z3+ but for Z2 and here it still worked. Maybe Sony changed something with the Z3+ but I don't think so. In short (but without guarantee): yes, it should still work.
If your Computer Operating System (Windows / Mac / Linux) is 64-Bit use FlashTool64.exe and if not stick with the FlashTool.exe
Click to expand...
Click to collapse
Thank you. You have been helpful. That leads me to yet another question (I am a first time xperia user, I have used HTC up to this point).
In the flashtool I was able to choose the z3+ as my device. It was my understanding that the z3+ was not included yet., WIth that said there are options within the flashtool to root the device. IS that something that can be done now?

FTF E6553_28.0.A.7.27_1295-7703_R6A
Device: E6553
Version: 28.0.A.7.27
Country: UK
Provider: unbranded
Customization number: 1295-7703
Size: 2.071.057.904 Bytes
Link: https://drive.google.com/file/d/0B8gf20AKtya0Skw2ZmFGZXFnMWs/view?usp=sharing
1) Get latest Flashtool from http://www.flashtool.net/downloads.php and install it
2) Run C:\Flashtool\drivers\Flashtool-drivers.exe and select Flashmode Drivers, Fastboot Drivers and both Xperia Z2 Device Drivers (there are no Z3+ drivers yet but the Z2 ones work great)
3) Download the FTF you want and save it in eg. C:\
4) Power Off your Z3+ and connect the microUSB cable to it (but leave it disconnected from the Computer)
5) Run C:\Flashtool\FlashTool.exe (or FlashTool64.exe if you have a 64-Bit Operating System on your Computer)
6) Click the Lightning icon on the very left
7) Select Flashmode and click OK
8) On the top select the path where you have your FTF downloaded
9) On the left select the firmware you want to flash
10) IMPORTANT: On the right in "Exclude :" select the checkbox next to TA
11) Click Flash
12) Wait some time
13) When asked (the green arrow window) press Volume down and connect the USB cable to your Computer
14) Flashing starts.
15) Check the main Flashtool window. It shows a log and that tells you when flashing is done. If you don't see any red lines everything went fine.
I strongly advise to NOT do anything with your Computer, its connected devices or cables as long as flashing is in progress. Don't even plug or unplug a thumb drive. I have a USB3.0 AddOn card and when I plug in a device my native USB2.0 ports are disconnected for a millisecond. That's not a problem for thumbdrives, etc. but this can brick your phone while it gets flashed.
---------- Post added at 05:27 PM ---------- Previous post was at 05:15 PM ----------
GCbard said:
Thank you. You have been helpful. That leads me to yet another question (I am a first time xperia user, I have used HTC up to this point).
In the flashtool I was able to choose the z3+ as my device. It was my understanding that the z3+ was not included yet., WIth that said there are options within the flashtool to root the device. IS that something that can be done now?
Click to expand...
Click to collapse
You're welcome and congrats to your first Xperia
I have absolutely no clue about rooting. Never did it. Current version of Flashtool may successfully root your Z3+ or it may brick it. I have absolutely no clue. What I know is that the Z3+ is officially not supported yet (but thankfully at least flashing works because Sony didn't changed anything since at least Z2).
---------- Post added at 05:30 PM ---------- Previous post was at 05:27 PM ----------
FTF E6553_28.0.A.7.24_1295-6968_R3A
Device: E6553
Version: 28.0.A.7.24
Country: DE
Provider: unbranded
Customization number: 1295-6968
Size: 2.070.785.234 Bytes
Link: https://drive.google.com/file/d/0B8gf20AKtya0Q09lbnU2T01KRjg/view?usp=sharing

Thanks an3k for this guide. I'm a first-time Xperia Owner so please forgive my dumb question. I wanted to flash the "FTF E6553_28.0.A.7.27_1295-7703_R6A" but there is no TA in the exlude menu. I'm on the newest Flashtool version. Can i proceed anyway or will I lose the Xperia Enhancements ?

addicted1900 said:
Thanks an3k for this guide. I'm a first-time Xperia Owner so please forgive my dumb question. I wanted to flash the "FTF E6553_28.0.A.7.27_1295-7703_R6A" but there is no TA in the exlude menu. I'm on the newest Flashtool version. Can i proceed anyway or will I lose the Xperia Enhancements ?
Click to expand...
Click to collapse
Yeah, there are some bad changes in the new flashtool version. Instead of simply selecting TA you now have to manually select each ta file. I'll update my quick guide but here's additionally what you have to do now:
Check the list below "Content :" and look for all entries ending with .ta (eg. cust-reset.ta). If you found one, search for the same entry in the "Exclude :" list (eg. CUST-RESET) and select it. Do this for every .ta entry shown in the "Content :" list.
Normally it's only CUST-RESET and FOTA-RESET. Sometimes you'll additionally have SIMLOCK
Additionally if you want to wipe your device while flashing it to a new firmware (was the default behavior until the latest flashtool version) you also have to check all three checkboxes (APPS_LOG, CACHE, USERDATA) in to top right "Wipe :" list!

[FTF] Xperia Z C6603 5.1.1 Generic Firmwares.

The Sony Xperia Z is a touchscreen enabled high-end Android smartphone designed, developed and marketed by Sony.
The phone was announced by Sony at CES 2013 and was released on 9 February 2013 in Japan and 1 March 2013 in Singapore and the UK. The Xperia Z was initially shipped with the Android 4.1.2 (Jelly Bean) operating system. The smartphone has Ingress Protection Ratings of IP55 and IP57, making it dust protected, low pressure water jet protected, and waterproof, which allows for immersion under 1 metre of water for up to 30 minutes, and features a 13.1 MP Exmor RS camera sensor as well as a full HD (1080p) display, encompassed in Sony's 'Omni-Balance' Design.
Pre-requisites:
Before we go any further, Please check your phone model number by going to Settings -> about phone -> Model number, If yours match this Number C6603, Then you are good to go.
Make sure your phone's battery is above 50% charge.
Original USB cable.
How to update your Sony Xperia Z C6603 to Android Lollipop 5.1.1?
To make sure Sony drivers will install properly on your PC, Download the latest version of Sony PC Companion from here and install it.
Download Flashtool from here and install it.
Download Sony FTF file from one of the links provided below :
Generic India (Customized IN) AndroidHost - AndroidFileHost
Generic Italy (Customized IT) AndroidHost - AndroidFileHost
Generic Saudi Arabia (Customized SA) AndroidHost - AndroidFileHost
Generic Singapore (Customized SG) AndroidHost - AndroidFileHost
Generic Ukraine (Customized UA) AndroidHost - AndroidFileHost
Now go to C:Flashtool and run Flashtool.exe, Click on the Flash icon in the left, Select Flashmode and press OK.
From the source folder in the top navigate to the folder where you downloaded the FTF file earlier and press OK.
Select the FTF file from the Firmware menu and click Flash.
Now wait until a window prompts asking you to plug your phone with USB cable.
Power off your device.
Press the volume down button and plug the USB cable, The update should begin...
Wait until the update is completed, Unplug the USB cable and reboot your device.
The first boot should take some time...
Now you have successfully update your phone.
Source: My Blog Sonyfirmware.com

Thankss

Good, thx for sharing. I was just looking for some Asia FTF.

jerryhou85 said:
Good, thx for sharing. I was just looking for some Asia FTF.
Click to expand...
Click to collapse
Yup, You welcome, Need any Generic version contact me.

When will be avaliable the generic eu version via ota? Tks

jerryhou85 said:
Good, thx for sharing. I was just looking for some Asia FTF.
Click to expand...
Click to collapse
you may use the one from Singapore, thanks to the best community for bringing up the best for everyone... keep it up!!!:good:

Generic Germany (Customized DE) can be found at
http://androidhost.org/J6g8Z
https://mega.nz/#!1l0GmbYR!JLBH2wyV6quvVtkdK5vTvdfRlsgzmdA7vBSYbsFe5UU

cranknet said:
Yup, You welcome, Need any Generic version contact me.
Click to expand...
Click to collapse
Dear Cranknet,
If the French version is available I will be more than happy to upgrade it
thanks for your efforts

chrisftlse said:
Dear Cranknet,
If the French version is available I will be more than happy to upgrade it
thanks for your efforts
Click to expand...
Click to collapse
The french version is not available at the moment, You can use XperiFirm to check.

Anyone happen to have a Generic HK ftf?

i find it hard 2 believe that the z has had seven software upgrades in its 2 year life!
my samsung galaxy note and xperia x10 both only had 1 or none.
thanks sony

How about c6606
I'm using c6606 and it's running c6603 lolipop 5.0.2, I wonder that should i update to c6603 5.1.1? Or I can choose to update to c6616 5.1.1

slatt01 said:
i find it hard 2 believe that the z has had seven software upgrades in its 2 year life!
my samsung galaxy note and xperia x10 both only had 1 or none.
thanks sony
Click to expand...
Click to collapse
It's SONY's first true "Flagship", so...

Thread closed at OP request for dead links.

[FTF] Xperia Z1 C6902 5.1.1 stock firmwares

The Sony Xperia Z1 is a high-end Android smartphone produced by Sony. The Z1, at that point known by the project code name "Honami", was unveiled during a press conference in IFA 2013 on 4 September 2013. The phone was released in China on 15 September 2013, in the UK on 20 September 2013, and entered more markets in October 2013. On 13 January 2014, the Sony Xperia Z1s, a modified version of the Sony Xperia Z1 exclusive to T-Mobile US, was released in the United States.
Like its predecessor, the Sony Xperia Z, the Xperia Z1 is waterproof and dustproof, and has an IP rating of IP55 and IP58. The key highlight of the Z1 is the 20.7 megapixel camera, paired with Sony's in-house G lens and its image processing algorithm called BIONZ. The phone also comes with Sony's new camera user interface, dedicated shutter button and has an aluminium and glass unibody design.
Pre-requisites:
Before we go any further, Please check your phone model number by going to Settings -> about phone -> Model number, If yours match this Number C6902, Then you are good to go.
Make sure your phone's battery is above 50% charge.
Original USB cable.
How to update your Sony Xperia Z1 C6902 to Android Lollipop 5.1.1?
To make sure Sony drivers will install properly on your PC, Download the latest version of Sony PC Companion from here and install it.
Download Flashtool from here and install it.
Download Sony FTF file from one of the links provided below :
Generic USA (Customized US) AndroidHost - AndroidFileHost
Generic Russia (Customized RU) AndroidHost - AndroidFileHost
Generic Middle East & N Africa (Customized MAA) AndroidHost - AndroidFileHost
Now go to C:Flashtool and run Flashtool.exe, Click on the Flash icon in the left, Select Flashmode and press OK.
From the source folder in the top navigate to the folder where you downloaded the FTF file earlier and press OK.
Select the FTF file from the Firmware menu and click Flash.
Now wait until a window prompts asking you to plug your phone with USB cable.
Power off your device.
Press the volume down button and plug the USB cable, The update should begin...
Wait until the update is completed, Unplug the USB cable and reboot your device.
The first boot should take some time...
Now you have successfully update your phone.
If you want an other customized version, Don't hesitate to contact us at [email protected] or via our Contact page here and we will add it very soon.
Source: Sonyfirmware.com

Thread closed at OP request for dead links.

[FTF] Xperia Z1 C6903 5.1.1 Full Stagefright fix firmware files.

The Sony Xperia Z1 is a high-end Android smartphone produced by Sony. The Z1, at that point known by the project code name "Honami", was unveiled during a press conference in IFA 2013 on 4 September 2013. The phone was released in China on 15 September 2013, in the UK on 20 September 2013, and entered more markets in October 2013. On 13 January 2014, the Sony Xperia Z1s, a modified version of the Sony Xperia Z1 exclusive to T-Mobile US, was released in the United States.
Like its predecessor, the Sony Xperia Z, the Xperia Z1 is waterproof and dustproof, and has an IP rating of IP55 and IP58. The key highlight of the Z1 is the 20.7 megapixel camera, paired with Sony's in-house G lens and its image processing algorithm called BIONZ. The phone also comes with Sony's new camera user interface, dedicated shutter button and has an aluminium and glass unibody design.
Pre-requisites:
Before we go any further, Please check your phone model number by going to Settings -> about phone -> Model number, If yours match this Number C6903, Then you are good to go.
Make sure your phone's battery is above 50% charge.
Original USB cable.
How to update your Sony Xperia Z1 C6903 to Android Lollipop 5.1.1?
To make sure Sony drivers will install properly on your PC, Download the latest version of Sony PC Companion from here and install it.
Download Flashtool from here and install it.
Download Sony FTF file from one of the links provided below :
Generic Taiwan (Customized TW) AndroidHost - AndroidFileHost
Generic Thailand (Customized TH) AndroidHost - AndroidFileHost
Generic Singapore (Customized SG) AndroidHost - AndroidFileHost
Now go to C:Flashtool and run Flashtool.exe, Click on the Flash icon in the left, Select Flashmode and press OK.
From the source folder in the top navigate to the folder where you downloaded the FTF file earlier and press OK.
Select the FTF file from the Firmware menu and click Flash.
Now wait until a window prompts asking you to plug your phone with USB cable.
Power off your device.
Press the volume down button and plug the USB cable, The update should begin...
Wait until the update is completed, Unplug the USB cable and reboot your device.
The first boot should take some time...
Now you have successfully update your phone.
If you want an other customized version, Don't hesitate to contact us at [email protected] or via our Contact page here and we will add it very soon.
Source: Sonyfirmware.com

@cranknet customized Philippines please..