I already give a try to SetCPU and now I'm using OPG Pro and when I try to put Powersave mode or another one, I can't. I can only choose the interactive mode. Why? Is due my processor?
Smartphone: Meizu M2 Note (rooted)
CPU: ARM Cortex-A53
Processor: AArch64 Processor rev 4 (aarch64)
Hardware: MT6733
Cores: 8
OS: Flyme (based on android 5.1)
No one??
Related
good day
I have a Chinese phone Star S7589 and would like to upgrade to android 4.4.2 Kitkat.
and Possible? which program to use?
thank you
Brand: Alps
Model: v89_jbl1a698
OS: 4.2.1
CPU model: MTK MT6589
GPU Renderer: PowerVR SGX 544MP
ROM: 8GB
RAM: 1 GB
Processor: Cortex-A7 CPU Quad Core 1.2GHz
Base Band Version: MOLY.RW8.1248.MD.WG.MP.V6.P42013
Kernel: 3.4.5root @ android
here u go
http://www.needrom.com/phone-roms/star/serial-s-star/s7589/
check this link
Sorry to resurrect an ancient thread, I have the same model as the op.
Is it possible you could direct me to the correct rom for this phone model that will install kitkat, please.
I have android wear that requires 4.3 and above to work and my phone is currently 4.2.1
Any help greatly appreciated.
I have coolpad note 3.
Specifications are
Chipset : Mediatek MT6753
CPU : Octa-core 1.3 GHz Cortex-A53
GPU : Mali-T720MP3
RAM: 3GB
OS: Android 5.1 (lollipop)
I want to port custom rom for it.
Can anyone suggest me porting guide and PORT rom for this device? Also can we port any rom based on Android 6.0 for it?
Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?
Bought this off bay market with fake 8.1 but it's really a kitkat. Can't find info anywhere maybe due to it's age. Hoping someone here has similar one before upgrading.
Device info:
Labels on MB: ZH5005MAIN-MIPI-PCB
l2017-12-29 V01
K3_20180627
K3_V2.0-01C3
SMT_D_B_M_Q_
Chips label:
MUC: EW3036AC
MT6627N
GM71508C
MT6323GA
MT6166V
MT6682V
Device info from app:
Model: K6_01_IH (yk858_emmc_wcdma)
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V10, 2014/05/13 18:15
RIL Version: Not Available
Build Number: ALPS.KK1.MP1.V2.11
Build Fingerprint: alps/yk858_emmc_wcdma/yk858_emmc_wcdma:4.4.2/KOT49H/1533356118:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Kitkat (8.1)
SDK: 19
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: yk858_emmc_wcdma
Chipset: MT6582
Cores: 4
Clock Speed: 598 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.67
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
I have a similar unit to yours. The "brand name" is YODY and i cant find any info on it. Its running fake 6.0. I found it has root but only in terminal emulator. I dont know a whole lot about mediatek units but they seem very different compared to other android phones i've messed around with so i've been reading up on them before i try to do anything to it. I would like to get full root and install viper and boost the mic gain. An upgrade to 8.1 would be great but i cant find firmware. I think whatever we do we will have to do it all on our own. Anyways here are some of my specs:
Model
K6_02_GH
System K6_02_GH_V2.0.1_20181128
Kernel
3.4.67
MCU
CM_0.7786.0_180307_15:14
App
MT1002_V1.0.9
SoC
MT6582
Board
yk858_emmc_wcdma
BuildID
ALPS.KK1.MP1.V2.11
eng.liuyang.1543395062
Firmware options
Do a search for the Ezonetronics RM-CT0011. There are 2 or 3 versions of firmware on a russian site. I've tried them, they're nothing spectacular with no real improvements on the known bugs. I'm currently using a version dated 2018-05-05
My rooted XT1641 32GB is from Koodo Canada. Current ROM: Stock 8.1.0 (athene-8.1.0-OPJ28.111-22).
HWInfo app gave me this. Notice: Machine=armv7l. ABI=armeabi-v7a.
But Google says: "The Qualcomm Snapdragon 617 MSM8952 is a mid-range ARMv8-based SoC".
Is that because of my Provider-ROM ? Important though since gApps and apk depend on. Could somebody check with your version please. Thank you.
............................................
SOC
SoC Snapdragon 617
CPU msm8952
Vendor Qualcomm
Cores 8
big.LITTLE 2 clusters
Clusters 4 x 1.52 GHz
4 x 1.21 GHz
Family Cortex-A53
Machine armv7l
ABI armeabi-v7a
Instructions swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 evtstrm
Process technology 28 nm
Revision r0p4
Clock speed 806 - 1516 MHz
Governor interactive
GPU Adreno (TM) 405
Vendor Qualcomm
OpenGL ES 3.2 [email protected] ([email protected], I47556f00c5) (Date:04/30/18)
Clock speed 240 - 550 MHz
Though the Snapdragon 617 is 64 bit capable, the stock ROM (including TWRP flashables) is 32 bit in nature (likely a reason for the armv7 architecture shown, which is the same in my G4 Plus). Hence on stock firmware, you'll need 32 bit apps.
If you're wanting to make use of the 64 bit capability, you'll need a 64 bit TWRP and a 64 bit custom ROM, along with 64 bit (ARM-64) GApps.