PC does not recognize smartphone + firmware upgrade encountered an issue
Hi guys, first of all, sorry for my bad English.
I own a Samsung Galaxy A5 (SM-A500FU), Android 5.0.2, ROM stock. My PC is a Windows 10 64 bits.
I tried to root my device with this guide: http://forum.xda-developers.com/galaxy-alpha/help/how-to-root-galaxy-a5-a500fu-lollipop-5-t3137613
A month ago it worked, but then I had to unroot my phone because I wanted to update it, but when I wanted to re-root it, it didn't work, I couldn't flash the cf-root so I closed Odin. After that, my phone displays "Firmware upgrade encountered an issue" when I turn it on. I would like to flash again the ROM stock, but my PC does not recognize my phone. I've tried on other computers, but the problem is still the same (tried on an Ubuntu PC, and a Windows 7 laptop).
Also, when I try to install the Samsung USB drivers, my PC freezes (BSOD) and I have to reboot it.
Please, help me, I don't know what to do.
Thank you.
PS: I will provide every information you need.
Bump
Please guys I really need your help, I'm panicking
Related
Hi,
I've got a Galaxy S5 g900F which I want to upgrade to 5.0 stock from alliancerom. I've got the zip downloaded, but the only way to update I've found implies running odin. That puts me in doubt wether I could do it or not on my dell laptop, whose battery is dead. I run it plugged in and I don't know if that means it doesn't get enough power into the USBs. I noticed windows explorer can't browse my card and phone memory, as they don't show up in there. Could I update via Odin, if it may just recognize my phone, without getting it bricked?
Well as long as its detecting your phone then it should work just fine .. first try to nandroid backup your phone through PC .. if it went well, then installing something should work too
After installing, if your phone gets stuck at galaxy s5 logo, install again
hello everybody,
I spent 3 days trying to un-brick my galaxy y... I can enter download mode but odin can't detect my phone although I have the correct drivers .
I used odin on other windows os : win 7, 8, 8.1 but that didn't fixed my problem.
I tried almost everything but my phone still sucked on the bootloop. :crying::crying:
Tried to flash many roms (hyperion, jellyblast, nemesis,...) but when flashing creed rom 3.5 it un-bricked my phone and saved my life :good::good:
This my little story with a half dead SGY, I hope it helps somebody.
SORRY FOR MY ENGLISH :crying:
This was a /system boot.img or /mnt/.lfs brick and your phone wasn't recognized because Kies prevents Odin from being used by customers.
And you didn't have the correct drivers, you must use Samsung SDK Drivers in XP compatibility mode when used on Win8.
So I am trying to install a custom recovery for my i9505, but Odin does not recognize the phone which was put in download mode before. Please help me! Here are some details:
I got proper USB Drivers installed (1.5.55.0), tried even with Kies/smart switch installed
Using Odin 3.09-3.10.7
Different usb-cables
Completly UNROOTED i9505 with STOCK recovery and 80% charge
In device manager the phone does not appear properly. It has two listings:
1. Other Devices\ MSM8960
2. USB-Controller \ Unknown USB Device (Error trying to get device description //translated from German
Windows 10 Home 64bit
Personally I think it should be a problem with Windows 10 but I am not sure...
To the phone itself because it could be hardware-wise broken:
The phone itself is a completly meltdown. Before I tried repairing it the speaker were broken (no sound). The phone ran an official lollipop rom. I think 5.0.1. Then I thought I could just hit a software update to fix maybe some problems. I updated to I9505XXUHOJ2 [5.0.1] DBT
And now the software experience is completly broken. The phone gets a lot of soft-reboots, the booting takes like 5 minutes and yes the phone is factory reseted. BUT HEY THE SPEAKER WORK AGAIN?!
I really dont know what is happening but there can be only 2 solutions:
1. Re-Install stock software via odin and then switch to cm and hope it works
2. or throw this piece of sh*t away because the cr*ppy hardware is brokanus sarus rekt
or is there any other solution? Tell me
Otherwise I would also ask if there is any solution to install cm12.1 or a custom recovery without root and odin access. (thinking of sideloading in recovery or something like this)
Thanks for reading and replying. I am gratefull for everything I hope the best ^.^
Try running Odin in compatibility mode, set for Windows 7.
fabsau said:
So I am trying to install a custom recovery for my i9505, but Odin does not recognize the phone which was put in download mode before. Please help me! Here are some details:
I got proper USB Drivers installed (1.5.55.0), tried even with Kies/smart switch installed
Using Odin 3.09-3.10.7
Different usb-cables
Completly UNROOTED i9505 with STOCK recovery and 80% charge
In device manager the phone does not appear properly. It has two listings:
1. Other Devices\ MSM8960
2. USB-Controller \ Unknown USB Device (Error trying to get device description //translated from German
Windows 10 Home 64bit
Personally I think it should be a problem with Windows 10 but I am not sure...
To the phone itself because it could be hardware-wise broken:
The phone itself is a completly meltdown. Before I tried repairing it the speaker were broken (no sound). The phone ran an official lollipop rom. I think 5.0.1. Then I thought I could just hit a software update to fix maybe some problems. I updated to I9505XXUHOJ2 [5.0.1] DBT
And now the software experience is completly broken. The phone gets a lot of soft-reboots, the booting takes like 5 minutes and yes the phone is factory reseted. BUT HEY THE SPEAKER WORK AGAIN?!
I really dont know what is happening but there can be only 2 solutions:
1. Re-Install stock software via odin and then switch to cm and hope it works
2. or throw this piece of sh*t away because the cr*ppy hardware is brokanus sarus rekt
or is there any other solution? Tell me
Otherwise I would also ask if there is any solution to install cm12.1 or a custom recovery without root and odin access. (thinking of sideloading in recovery or something like this)
Thanks for reading and replying. I am gratefull for everything I hope the best ^.^
Click to expand...
Click to collapse
Windows 10 x64 works fine. I used it myself.
Try all the different usb ports and reinstall the drivers. Use the drivers from here:
http://developer.samsung.com/technical-doc/view.do?v=T000000117
Hi,
As the addition, make sure Kies isn't running when Odin is executed as it could cause the device being not detected properly in Odin.
PS Note: I used Windows 10 Home x64 too and working fine as it should.
Sent from my GT-I9500
Hello guys,
I tried to root my LG G4c with Android 6.0 Marshmellow, wich succeded after a reboot it didn't startup anymore.
I have the error code: [590]Boot Verfication Fail!! MISMATCH_SIG_LEN.
The phone hangs in a bootloop with this error code.
What I've tried is:
Reflash the phone with the original stock ROM for my device with LG Flash Tool 2014.
Here I ran into trouble.
The moment where I can change the country and language the language thingy stays blank
When I ignore that and click ok.
The flash process begins nothing happens on my phone and the program that's running shows only question marks ?
I've tried 2 different computers running Windows 8.1 and Windows 7 with no luck unfortunately.
I've tried running the program in Windows XP SP3 compatibility mode, still the same.
I tried 4 different cables.
And lastly the program is VERY slow.
I'm out of ideas.
Hopefully you guys can help me.
Thanks in advance.
Hey fellas,
long time no posting here from me.
Currently struggling with Odin software and Galaxy Tab S6 lite.
Whenever I try to flash anything Odin is stuck at Setup Connection and then fails after amount x minutes.
Seems to be driver related but I almost tried every Samsung USB drivers or the one that come with zadig.
However, device is recognized by windows and by Odin itself.
Any ideas from your end?
neothechosenone said:
Hey fellas,
long time no posting here from me.
Currently struggling with Odin software and Galaxy Tab S6 lite.
Whenever I try to flash anything Odin is stuck at Setup Connection and then fails after amount x minutes.
Seems to be driver related but I almost tried every Samsung USB drivers or the one that come with zadig.
However, device is recognized by windows and by Odin itself.
Any ideas from your end?
Click to expand...
Click to collapse
what version of odin are you using. to get latest one go to https://downloads.corsicanu.ro/samsung/
download the odin in that list and try that... i had same issue but the latest odin fixed it for me