Related
Hello,
Hello,
Samsung S4 from Canada - Provider Bell - Model SGH-I337M
Phone was functional, new in box, with latest November firmware.
Soft Bricked it when Odin failed (auth) to downgrade from latest frimware to 4.22 (reason for downgrade: unlock codes not working; USB unlock not working due to new security features in latest update).
Tried steps in http://forum.xda-developers.com/showthread.php?t=2261153 using Kies and that also fails with - PC failed to recognise the mobile phone
Now trying to upload latest firmware using Odin 3.09, i get FAILED:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On Phone, looks like 2% done (blue bar)
Is this phone garbage????
Thanks !!
Hey have you tried re-flashing the original bell rom? Or did you have a backup? I haven't bricked my s4 but I bricked my S3 multiple times and I ended up bringing it back with a basic ATT rom before getting the rom I wanted to work.
So first try flashing your original stock rom (if you have it or go to your backup)
Next step try an ATT stock rom.
If that doesn't fix it, someone more experienced will have to chime in.
mfreeman3769 said:
Hello,
Hello,
Samsung S4 from Canada - Provider Bell - Model SGH-I337M
Phone was functional, new in box, with latest November firmware.
Soft Bricked it when Odin failed (auth) to downgrade from latest frimware to 4.22 (reason for downgrade: unlock codes not working; USB unlock not working due to new security features in latest update).
Tried steps in http://forum.xda-developers.com/showthread.php?t=2261153 using Kies and that also fails with - PC failed to recognise the mobile phone
Now trying to upload latest firmware using Odin 3.09, i get FAILED:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On Phone, looks like 2% done (blue bar)
Is this phone garbage????
Thanks !!
Click to expand...
Click to collapse
Odin fails due to the firmware
Hello,
Finally I found the issue. The File at Sam Mobile version 4.2.2 for Bell is the cause. It fails at 2% upload. The 4.3 file restored the phone, but had to root using CF-AUTO-ROOT in order to get the /data folder back (phone stuck in a loop in boot animation).
The other file available there, an older 4.2.2 is corrupt once downloaded (tried 3 times).
Reason I was flashing back to 4.2.2 is because with the new Bell 4.3 firmware, network unlock codes no longer work (changed??) and neither does USB unlocking (new security feature).
It is conceivable that the new 4.3 frimware from this provide is the cause of the Odin failure at 2% for 4.2.2 ?
Any other good reliable sources for a 4.2.2 firmware version pre ME1 ?
Samsung S4 i337m for Bell (Canada) ??
Thanks!
Try this: launch Samsung Kies and go to Tools -> Firmware Upgrade and Initialization.
I tied it (my phone work now) but i have always the same trouble with ODIN (nothing can't put in except CF-AUTO-ROOT don't tell me fail)
mfreeman3769 said:
Hello,
Finally I found the issue. The File at Sam Mobile version 4.2.2 for Bell is the cause. It fails at 2% upload. The 4.3 file restored the phone, but had to root using CF-AUTO-ROOT in order to get the /data folder back (phone stuck in a loop in boot animation).
The other file available there, an older 4.2.2 is corrupt once downloaded (tried 3 times).
Reason I was flashing back to 4.2.2 is because with the new Bell 4.3 firmware, network unlock codes no longer work (changed??) and neither does USB unlocking (new security feature).
It is conceivable that the new 4.3 frimware from this provide is the cause of the Odin failure at 2% for 4.2.2 ?
Any other good reliable sources for a 4.2.2 firmware version pre ME1 ?
Samsung S4 i337m for Bell (Canada) ??
Thanks!
Click to expand...
Click to collapse
You might want to check which bootloader you are on, you can do this through terminal on the the phone (instructions burried somewhere in one of the threads) or download Phone INFO from the play store, it will display which bootloader you are on. Once you know that, see if you can find a thread (search) on downgrading from 4.3 to 4.2
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
hello. have you tried another version of odin? im sure someone can help you revive your phone
Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..
hypnodaz said:
Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..
Click to expand...
Click to collapse
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
---------- Post added at 09:37 AM ---------- Previous post was at 09:31 AM ----------
Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
Have you tried using Odin V3.09 to flash 4.4?
hey_joe said:
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
Click to expand...
Click to collapse
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?
Mamba25 said:
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?
Click to expand...
Click to collapse
Don't follow that one.
Go here and download the right file for your phone's model, put phone in download mode and flash using odin in ap/pda slot.
Btw, have you tried flashing 4.4 using odin v3.09?
When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..
hypnodaz said:
When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..
Click to expand...
Click to collapse
I don't think this is the case because when I first tried flashing from 4.3 to 4.4.2 it tried for a few seconds then failed and been stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“ despite resetting Odin and going back into download mode, tried reflashing but keep getting the 'FAIL' (logs posted in original first post).
Is there any reason why my phone is being detected as 'Samsung GT-S5690' in MobileGo? I'm thinking if Kies could detect it as the Note 3 again my problems would be solved.
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone
Mamba25 said:
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone
Click to expand...
Click to collapse
No it's not.
Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
looks like u r trying to flash 4.3 & 4.4 one after one, now dont try 4.3 at all, make sure kies is not running in baground, disable antivirus if any.
I had the the same issue with kies myself, tried every trick in the book before I tried the method I mention above.. maybe it's an issue with the phone itself, or a certain batch of phones?
Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
...
Click to expand...
Click to collapse
The writing of stock 4.3 fails since your bootloader was updated by your failed attempt. You will probably never be able to write a 4.3 stock image.
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).
xclub_101 said:
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).
Click to expand...
Click to collapse
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
There is AP in 3.09 in place of PDA.
Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.
xclub_101 said:
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.
Click to expand...
Click to collapse
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.
madsus said:
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.
Click to expand...
Click to collapse
I've taken the phone to a repair shop recommended by Samsung themselves, they've had it a week now and I rang yesterday and they said it is the first Hong Kong Note 3 they've received and are waiting to hear from Samsung as to how to repair it. BIG YAWN!
Will keep you posted - miss my phone
Note 3 SM-N9005 firmware upgarade issue
Hi , i am having the same problem in my Note 3 i upgraded phronesis rom and after the phone was not detected in computer. so tried to flash custom kitkat rom again then it got disconnected and then showing error as firmware upgrade issue,
tried to download firmware and update by Odin, tired cmw recovery and tried many firmwares, Odin shows Failure and Kies dosent shown code or phone in emergency recovery , all ways failed, is it possible to make the phone work normal.
Last night I bricked my phone, trying to flash the stock modem (NAE) on mobile Odin. As of right now, it does not boot, simply being stuck at the SAMSUNG GALAXY S4 screen. It will not boot into recovery, instead rebooting to the same screen once more. Kies will not see the connection, and I have reinstalled it, the drivers, etc.
Odin does the same thing, but sees the connection. All I get is this after trying to flash the firmware (both with Auto Reboot and F. Reset Time on and off)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
And the firmware that I am using is the "L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5." I don't know what to do, and I was thinking that someone could help me here.
Were you on NG2 perhaps? If so, you cannot go back to NAE and that would explain the Odin failure.
Go to www.sammobile.com and download the NG2.tar and give that a try.
If only I had thought of that (which I couldn't have)! Thanks, this worked. I was on the NC6 version of the ROM, and have downloaded/installed this. It works like a charm except one thing; the data seems to either not be working, or extremely slow at times. That, and the messaging does not appear to work. Wifi is the same way at times.
Novorone said:
If only I had thought of that (which I couldn't have)! Thanks, this worked. I was on the NC6 version of the ROM, and have downloaded/installed this. It works like a charm except one thing; the data seems to either not be working, or extremely slow at times. That, and the messaging does not appear to work. Wifi is the same way at times.
Click to expand...
Click to collapse
If you were on NC6 you have a triband model (720T) and need NG5.tar.
this model seems difficult (gt-i9506)
i tried to root it via towelroot, then kingoroot, these failed but then now the reboot is stuck on "firmware upgrade encountered an issue"
ive tried Kies firmware recovery but the download fails after 80%,
ive tried the sammobile download the ROM this too fails, network drops out tried this 3 times
i want to try Kies emergency recovery but cant find any recovery code
im stuck i dont know what to do now been researching for 4 hours cant find solution :crying:
could anyone please help?? am going crazy over this spent 2 days researching and finding nothing
Download a complete stock rom and flash it with ODIN. You have to uninstall KIES beforehand (they are conflicting).
thanks for reply...
i took kies off and this is what Odin is giving me...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMHF_I9506VAUAMH3_I9506XXUAMHD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the device says this.....
SW REV CHECK FAIL: [aboot]Fused 1 > Binary0
does this highlight anything that could be going wrong?
Not sure... but looks like the rom is not for that device. Are you sure you have a i9506?
on samsmobile GT-I9506/VAU/ Roms (i cant post link)
well the first ROM was 4.2 android (bottom of ROM list), so then tried 4.4 (top of ROM list) android it failed again but with different Odin errors...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUCNJ1_I9506VAUCNJ1_I9506XXUCNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
can anyone see the fault here...?? no error came up on the device, only on Odin this time
Did you restart after KIES de-installation? Was USB driver successfully missing (so you had to install one manually for ODIN)? If not, you probably still have drivers/files running from KIES.
Otherwise, try a different computer to double check its not the system.
If you originally updated to Android 4.4.x or later on this device, you cannot install 4.3.x or lower as Knox within the bootloader will actively prevent Odin from functioning. As to Odin, make sure you're using the original cable, are not using a hub, have Kies disabled or uninstalled, and use a different USB port. Odin sometimes is picky about the ports it uses.
If you can get the ROM issue resolved, use CF-Autoroot to root, keeping in mind that you will trip the Knox flag in doing so. Towelroot and other one-click root methods don't work on your device.
FIXED IT!!!!!!! :laugh::silly::good::cyclops:
Moved all operations to a different PC running XP with no kies on it
The error still occurred "write fail"
So instead i tried Odin 3.09 instead of 3.07 but most of all i changed usb cables, found an original cable off my mates Nokia
then boom!!! she starting writing!!!
Thankyou so much you legends, you are now my best friends forever!!!
Strangely the new flash, all my old previous data & apps are still on there??? somehow the network is not locked either which i was fearing being a vodafone ROM
still want to root it though
Flashing a ROM through Odin doesn't wipe the data partition, which is why your apps are untouched.
bear with me im new to this .
I have a s5 with 5.0 on it and i just want to use foxfi for hotspot again. i read that i have to go back to 4.4 to do so.
i went to sam mobile, registered and waited 3 hours for the file that was for 4.4 to load. then unzipped it. downloaded odin. installed odin . went into developer mode on phone. usb installer was selected if i recall then. powered down phone. held 3 buttons for download mode with phone disconnected. started odin. selected the tar. or md5 file that was decompressed then connected phone and selected start. i keep failing with this in the message
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANK2_G900VVZW1ANK2_G900VVRU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
additional info on the phone
sm-g900v
android version 5.0
kernel 3.4.0 fri jul 31 2015
dont care about knox or warrenty related stuff just want to have wifi hotspot to work
G900V.....isn't that the Verizon variant?
If it is, it may be that (like with AT&T) they've locked your bootloader down and downgrading isn't possible.....
http://i.imgur.com/rVnFwJM.jpg
Is there a way to verfiy unlocked or not?
Just been reading up on Verizon's behaviour.........
It is standard practice for them to provide phones with locked bootloaders.......
If your device is Verizon branded (has all the Verizon bloatware apps), it's locked down........
http://i.imgur.com/rVnFwJM.jpg
Can it be unlocked?
Apparently it's all done through some sort of encryption which nobody has found a way around.....and you've got more chance of being able to walk to the Moon than you have of getting either AT&T or Verizon to release the decryption 'key'..........they're big players who want their own way and who have the 'muscle' to get it......
http://i.imgur.com/rVnFwJM.jpg