Database Users

SGS4 won't boot....

Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx

vivelafrance said:
Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx
Click to expand...
Click to collapse
where odin failed exactly?
did you try changing usb port? kies totally disabled? original usb cable?

thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.

vivelafrance said:
thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.
Click to expand...
Click to collapse
one more thing, remove battery for a couple of minutes, then try with odin 1.85

All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.

vivelafrance said:
All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.
Click to expand...
Click to collapse
i dont know if flashing pit file along with the firmware will work

yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?

vivelafrance said:
yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?
Click to expand...
Click to collapse
pit file is flashed with the firmware. choose the right pit for your device! re-partition will be checked automatically when you select the pit file.

still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...

vivelafrance said:
still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...
Click to expand...
Click to collapse
did you flash firmware with the pit file at same time and didnt work?
almost you did everything.
try to change computer if available.

no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help

vivelafrance said:
no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help
Click to expand...
Click to collapse
If you haw acess t dawnload mod you are nhot bricked pleas go and try other pc
Sent from my GT-I9505 using xda premium

First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx

this is surely NOT a mobile issue if you can enter into download mode.
i had the exact issue a month ago when i had note2.
if you can't try it on another pc, try :
1) uninstall skies completely
2) unisnstall usb drivers
3) reboot the pc
4) connect your s4 in download mode to your pc.
5) let your pc install freah usb drivers
6) start odin and flash
7) if still you get the same error download a different verison of the official rom and try flashing.
i followed the above procedure couple of times and was finally able to install the rom. the issue is either with the drivers or the rom.
Sent from my GT-I9500 using xda app-developers app

bricked for sure
vivelafrance said:
First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx
Click to expand...
Click to collapse
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.

Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app

Bluetoth10 said:
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.
Click to expand...
Click to collapse
thnx. yeah, flashing the PIT actually always worked but it was the only thing that worked! lol

DenmarkRootN00b said:
Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.

vivelafrance said:
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.
Click to expand...
Click to collapse
good luck at least i just thought it would work by doing it in recovery but yeah... warranty is better.. if not.. then keep trying if they wont replace it

ok I FINALLY could access the stock recovery, did a full wipe and everything is back in order now, works perfectly.
THANKS to all!

Only will boot into downloading mode

I've got a sprint galaxy s4, was running 4.2.2 and I had added the hotspot mod by overwriting some files to make that happen. I was attempting to go back to stock in order to update to 4.3 via an Odin3 flash and something happened. I can only boot into the download mode, I can't get into recovery mode at all. If I try to get into recovery, I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Kies will not recognize my phone. When I plug it into my computer via usb, I hear a notification. Kies attempts to connect, but never does successfully. I have no way of getting my serial number as I can't boot it and it's not listed under the battery cover. I have tried uninstalling/reinstalling drivers with no success. I have tried to uninstall Kies completely and flash via Odin3 but get a failure below
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMF9_L720SPTAMF9_L720VPUAMF9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
Also tried again and got these messages
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMF9_L720SPTAMF9_L720VPUAMF9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope I've provided info on what I have tried. I am not an expert by any means, but would really appreciate any help. At this point I'm looking to just get back to stock and have a usable phone. I don't care about losing any info and am willing to wipe/flash whatever I can. Thank you for any input! I'm hoping to not have to take this to the sprint store

You just have to odin the stock mf9 tar again. I would try a different version of odin, a different usb port, or a different usb cable. Odin will fix your problem, don't use kies. I used odin 3 version 3.07 but I've also had a lot of success with odin 3 ver 1.85 that is included when you download cf autoroot. Also, make sure you are running odin as administrator.

cruise350 said:
You just have to odin the stock mf9 tar again. I would try a different version of odin, a different usb port, or a different usb cable. Odin will fix your problem, don't use kies. I used odin 3 version 3.07 but I've also had a lot of success with odin 3 ver 1.85 that is included when you download cf autoroot. Also, make sure you are running odin as administrator.
Click to expand...
Click to collapse
Thanks for your reply. I am trying to flash the stock .tar but I'm not having any success. I get the error messages I listed above. Any clue what those mean or what I could be doing wrong? That looks like greek to me. I really don't know what any of it means.

i would just use the CF-autoroot odin......this has saved my ass twice !!! seems to be the " mirical odin " program

chris-allen said:
i would just use the CF-autoroot odin......this has saved my ass twice !!! seems to be the " mirical odin " program
Click to expand...
Click to collapse
wow. Finally figured it out. I tried 3 different USB ports, none of those worked. Tried a 4th on the back of my PC and viola, finally got Odin to work. THanks for your help!

[Q] Odin fails, soft bricked phone.

Hey,
A while ago I've installed CM10.1 on my S4, but I was missing a lot of samsung features. So I've installed 4.2.2 again, set the binary back to the official one so I was able to update my phone again. Now that 4.3 has came out I tried to install it but then my phone bricked. The first attempt was not with odin but official via OTA.
Now i've got a soft bricked S4, tried to install the firmware several times via Odin but Odin keeps failing. If I first try to install it it wil fail at the aboot.mbn point. When I root it with Autoroot CF and then try to install the firmware it fails at system.img.ext4 as I show down here. Has anyone an idea how to fix this? Tried many options already like installing a new recovery like CWM Recovery and TWRP. (Couldn't find a stock recovery, maybe thats the solution.)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ7_I9505PHNEMJ8_I9505XXUEMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Currently have CM10.2 installed so I can use my phone, this works but not great. Wifi, Calling, Camera, Headphone and much other options won't work. I really want to install official Samsung 4.3 firmware and be able to update again with OTA.

chendoyen said:
Hey,
A while ago I've installed CM10.1 on my S4, but I was missing a lot of samsung features. So I've installed 4.2.2 again, set the binary back to the official one so I was able to update my phone again. Now that 4.3 has came out I tried to install it but then my phone bricked. The first attempt was not with odin but official via OTA.
Now i've got a soft bricked S4, tried to install the firmware several times via Odin but Odin keeps failing. If I first try to install it it wil fail at the aboot.mbn point. When I root it with Autoroot CF and then try to install the firmware it fails at system.img.ext4 as I show down here. Has anyone an idea how to fix this? Tried many options already like installing a new recovery like CWM Recovery and TWRP. (Couldn't find a stock recovery, maybe thats the solution.)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ7_I9505PHNEMJ8_I9505XXUEMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Currently have CM10.2 installed so I can use my phone, this works but not great. Wifi, Calling, Camera, Headphone and much other options won't work. I really want to install official Samsung 4.3 firmware and be able to update again with OTA.
Click to expand...
Click to collapse
I thought the only way to fix a bricked phone is to have it repaired or something. But I dont understand why you would switch back to samsung ui, but thats not my business. I believe is risky to go back to the phones normal UI after installing a rom because of the update problem. Basically I would never go back to the normal phones UI even if I wanted to after installing a rom, because I feel like there will be a problem. I dont really know a solution but maybe you can give it into someone to repair it, but I believe it costs A LOT. Sorry I don't really have a good solution for you. These are the risks with installing roms and switching back.

Are you using the official cable that came with the phone
Sent from my GT-I9505 using xda app-developers app

imlgl said:
Are you using the official cable that came with the phone
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Yes, also tried another cable.
Also tried: Another Odin version, another PC and different USB ports.

Anyone?

Nobody an idea?

You could try the following things:
Re-install samsung drivers
Make sure Kies is not running in the background
Try changing ports
Try different USB cable

bAk3ry said:
You could try the following things:
Re-install samsung drivers
Make sure Kies is not running in the background
Try changing ports
Try different USB cable
Click to expand...
Click to collapse
Tried again another PC and it worked a bit, I now have stock samsung firmware 4.3 installed but still no wifi and no sound. Is there a solution for that? Already tried to install CWM and TWRP but still doesn't work. When I try to play music it says audio file not supported (.MP3 file, before problems always worked) S Voice keeps crashing... And when I try to turn Wifi on I get a security message that says:
The device detected an application attempts to perform action that are not allowed. These actions are blocked.

You need to flash one of the WiFi 'fixes' from this thread, read it to work out which file you need to flash.

MistahBungle said:
You need to flash one of the WiFi 'fixes' from this thread, read it to work out which file you need to flash.
Click to expand...
Click to collapse
Tried that but it still won't work.

I bricked my Note because i didnt flash the kernel :(

Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!

If you can access download mode, your phone is not bricked.
Simply download last firmware for your model from sammobile, and flash it with odin...

ok thanks, will do.
But how do I safely root the note 4 5.1.1? CF-Autoroot isnt compatible

Ok, I just finished download a stock rom for my phone (.tar.zip) but when I click start in Odin it always fails for some reason...<ID:0/003> Can't open the serial(COM) port.
Edit: tried a different port now it fails at:
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What can I do?
Does upgrading via Kies will result in losing all data?

I'm working on this issue for hours now but I'm stuck
Using Odin it will fail at sboot.bin
And kies doesnt recognize my note 4

Here's the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone: SW REV. CHECK FAIL, DEVICE 2, BINARY 1

Nixdax said:
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
Click to expand...
Click to collapse
Restore your backup in recovery

What is your exact model, G or F, what? You download the ROM from sammobile with your exact model no., and then flash.

It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........

Never heard about the H version before! Anyway, make sure you are flashing the correct Xposed, that is Wanam's, but Arter's, and read the installation instructions closely.

Nixdax said:
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Click to expand...
Click to collapse
Please, search before flash.

H model is with Exynos processor.
http://www.sammobile.com/firmwares/database/SM-N910H/

tried to root and sky fall down

ok let`s start from the start, i tried to root my note 3 sm-n9005 and failed to succeed.
i used the cf auto root guide, odin said success but my phone failed to boot and went straight to recovery mode.
then, i tried using odin 3.07/09/11/185 to rewrite into the stock rom, but odins says FAIL and gives nothing in return.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i just want get my phone back with android that above 4.4
please help :crying:

Looks like the ROM you are trying to flash is not made for your phone or the ROM is older than the ROM currently installed on the phone.
Are you using the original Samsung USB cable? Tried different USB cables and ports?

For Root note 3 use Towelroot by Chainfire.
Sent from my Limited Edition Note 3 LTE using Super Tapatalk

Download Official 5.0 ROM from Sammobile and flash it in Odin, after it try to root phone...
In dialog this looks like firmware file is damaged

The firmware doesn't look damaged, the firmware you are trying to flash has a bootloader that is older than the bootloader in the phone.
isn't chainfire's root method called cfautoroot?

download one more time...