if you search CWM or TWRP or Backup from Rom look on this Page
HTC-Desire-626G-Development
There is also a description for SuperSU
How much R these phones?; could u use it any phone company??
How much R these phones?; could u use it any phone company?? ?:silly:
Joolie ah Gross said:
How much R these phones?; could u use it any phone company?? :silly:
Click to expand...
Click to collapse
You can get them for around 80$usd. It is unlockable out if the box but you may have to take it to a metro/T-Mobile store to help you with that. But it should work with any gsm carriers for the most part (at&t/T-Mobile/cricket/metro/etc.)
Htc 626 a32_ul boot.img
i soft bricked my phone and downloaded many boot and recovery images and roms and ruu trying to fix my htc626 a32_ul qualcomm 410 type phone , been nightmare that looked impossible to fix and waiting here trying find a root or fix have learnt a lot about andriod these last few weeks
anyway did realise that after learning what i should be looking for i knew it should be in file named
0PKXIMG_A32[email protected]50720.2C_17.00_018_F_release_446349_combined_signed.zip
source found at IR-file.com
my htc 626 phone gehtc version all gives output of :-
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.02.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CC592YM02455
(bootloader) imei: ***************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a32_ul
(bootloader) platform: hTCBmsm8916
(bootloader) modelid: 0PKX20000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: b7436e99
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 1001
bootloader is unlocked
a32_ul pvt ship s-on
i installed your rom onto sd-micro card, then when booting into bootloader i get the rom installing
but get this inforamtion onscreen showing image update fail saying no image or wrong image
sd checking...
no gift file...
loading...(0PKXDIAG.zip)
No image!
loading...(0PKXDIAG.nbh)
no image or wrong image !
loading...(0PKXIMG.zip)
....
....
....
Device halted due to large Image update fail
Press <POWER> to reboot.
!! Image Update FAIL !!
then when I unzipped file and took out boot_signed.img
used htc_fastboot flash boot boot_signed.img then rebooted phone
its alive im back in stock :laugh::laugh::laugh:
boot.img used here [
htc fastboot files used
is such a relief to have my phone back up and working still not rooted but working in stock firmware hope this post may help any other lost souls in the soft bricked nightmare lol
oh dea
o prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
i have link to files but unable to post till 10 posts
regards from Frankgambit
i have boot img for anyone who wants it darn this s-on htc thing what pain in neck for ppl i still want root but now phone up and running again i can wait for definite solution to be found and now free to experiemnt now as i have fail safe repair any eorrors that may cause soft brick now.
---------- Post added at 10:03 PM ---------- Previous post was at 09:41 PM ----------
frankgambit said:
i have boot img for anyone who wants it darn this s-on htc thing what pain in neck for ppl i still want root but now phone up and running again i can wait for definite solution to be found and now free to experiemnt now as i have fail safe repair any eorrors that may cause soft brick now.
Click to expand...
Click to collapse
also another thing is if i brought a 8 gb htc 626 then i assume the free space left on phone would be say 3gb on main internal memory left to use.
so i pay for 16 gb and what do i get not a lot more than before and still only 6 or 7 gb free space on phone after bloat-ware , unable to remove or move such bloat-ware and other apps to external sd card until find method for root
this seems like a recurring makers inbuilt problem caused by manufacturers same like when ibm chose the memory size of first pc so to maximise profit selling 16 kb chips, then cpu need for access to ever larger memory space made there original model impracticable. i think this is deliberate so that they can sell there top end phones with loads internal memory at more higher price. what i would like in phone is phone with 2 sd slots one slot for etreme sd card double port for application to run from or store , and then another sd card for media files for audio or films and pictures to be stored on and of as largest size possible but maybe not so fast if price of speed or data transfer over size consideration.
i see *exception in specs htc626 could use 2 TB of storage space but is limited to 128 gb by operating system of android 5.1 , and yet see maybe android 6.0 maybe allows up-to 512 gb.
root is only way cure this bloatware problem for now and yet even so i have paid for my hardware i am not allowed to make full use of the hardware by restrictions placed on my phone by the manufacturer desire to force me to buy the more expensive models. that have more free internal memory.
i was going to wait till monday before attempting too root phone, but now i feel safer in that i can recover phone from soft brick possibility , i have decided to go through all the one click apps again that i tried using blindly before ,, but now with eyes wide open to the possible pitiful and knowledge i can recover to stock boot again . lets go again as the gains from having rooted device far out weighs the drawbacks of having useless unrooted device as far as i am concerned.
frankgambit said:
i was going to wait till monday before attempting too root phone, but now i feel safer in that i can recover phone from soft brick possibility , i have decided to go through all the one click apps again that i tried using blindly before ,, but now with eyes wide open to the possible pitiful and knowledge i can recover to stock boot again . lets go again as the gains from having rooted device far out weighs the drawbacks of having useless unrooted device as far as i am concerned.
Click to expand...
Click to collapse
you have to relock your device on fastboot to be enable to restore with RUU, belive me, i did the same with a M&, ne max and one 626s, i was like crazy why got error until i found that relocking bootloader then I was able to restore with RUU in some minutes.!
Related
Hello, I have a 32A with 1.76.2007 SPL, and 6.35.08.29 Radio, and I simply can't flash the radio. I can flash the SPL just fine, I've flashed it to 1.33.2010 and then to 1.76.2007 with no problems, however, when I try to flash the radio it just keeps saying in the command line "Writing". I've followed this tutorial to the letter: http://forum.xda-developers.com/showthread.php?t=605239
By the way I tried to flash it to two different radios now, an old 3.22, and the newest 6.35
Thanks in advance, and I hope I'm not making a stupid mistake, since I'm new at this.
Still got the problem?
Can you provide more info or why you are trying to flash a diff radio...
Also, download my fastboot commander from my signature and copy-paste all the device info.
Thanks for answering, and I'm sorry I didn't post why I'm trying to flash a different radio. The thing is most ROMs out there are 3.22 and so I can't install them unless I do that. I used your program and here is what it said:
SPL/hboot version: 1.76.2007.
Radio version: 6.35.08.29.
Main software version: 3.05.401.3.
cid: htc__506.
cpld: 12.
product: sapphire.
mid: sapp10000.
security: off.
build-mode: eng.
If you download the magic 32A version, you will get a special tab.
I will flash a compatible set of spl, radio and recovery.
Try it out and if you get an error, post here what you see in the "actual output".
Thanks a lot! It finally worked! But I still don't understand why it didn't work the other way around. I noticed that when I tried to flash it in the command line, as soon as it said it was "Writing" my phone's screen would turn black, and it didn't when I used your awesome program.
Anyways I highly recommend this program to anyone who wants to flash SPL/Radio.
By the way could you check my other thread? It's also about a problem that's been annoying me very much.
I'm glad it worked out for you :0)
About the other problem, i have no idea :0)
Oh, ok, well thanks a lot anyway
Hi all,
I accidentally flash a orange-...nbh for G1 to restore a MT3G t-mobile 32B. (BAD BAD ACCIDENT!!!)
Now I get stuck with fastboot (S-ON), no recovery and when flashing the correct nbh freezes on radio update.
The radio version is the only thing that seems odd to my but it is just my thoughts... I'm a newbie on Android modding.
mumilover do you believe your approach can help on my case...
Thanks a lot...
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.16.19
version-main: 1.58.73.2
<bootloader> command list
<bootloader> keytest
<bootloader> heap
<bootloader> boot
<bootloader> reset
<bootloader> powerdown
<bootloader> rebootRUU
<bootloader> task
<bootloader> rtask
OKAY
Using the Fastboot Commander v.1.5 tool created by mumilover I got the additional information:
SPL/hboot version: 1.33.0006.
Radio version: 2.22.16.19.
Main software version: 1.58.73.2.
cid: t-mob010.
cpld: 10.
product: sapphire.
mid: sapp30000.
security: on.
build-mode: ship.
Any hope for me to get back my phone ?
Thanks
You need a matching spl/radio before you can flash anything new...
Could you explain to me how can I match the SPL/Radio. Probably with a special nbh file?
When I try to flash sappimg.nbh it freezes on radio update.
Thanks again for your help
grillonegro said:
Could you explain to me how can I match the SPL/Radio. Probably with a special nbh file?
When I try to flash sappimg.nbh it freezes on radio update.
Thanks again for your help
Click to expand...
Click to collapse
There is no reason I know of why the radio won't flash that isn't due to something more serious.. To the best of my knowledge the few other people that flashed the Orange Dream NBH on a sapphire where able to get into the 1.42.2000 S=OFF SPL and use fastboot flash radio to return to 2708+ radios..
Of course since now you have 1.33.0006 I'm not sure the best way to proceed. (particularly since I don't own the device, and it may be confused with the radio version)
If you can't boot the device and all you have is a S=ON SPL (other than 1.33.0013d) all you can do is flash SAPPIMG.nbh and SAPPIMG.zip files.. preferably find one with an S=OFF SPL or that makes the system boot.. A goldcard will help if the image is from another region (ie not T-Mobile US)
The problem is the mismatching between the radio and spl.
If the offsets are not correct, every radio flash will fail due boundary error.
This problem has been seen on many magic devices with old spl together with new radio and the opposite. I always recommend to fix it by flash the matching spl and then change the entire layout. That approach has been successful every time.
So, to start with the radio - it's for the dream device. According to your thread: http://forum.xda-developers.com/showthread.php?t=831139 the version nr which the OP has posted should have given him an eng spl, namely the 1.42.2000.
My suggestion would be to reflash the nbh image from the link(orange-1.58.73.2.nbh ) and hope for it to flash spl first. Spl typically have the same size so the offsets will be the same allowing it to complete.
Once he has eng spl, he could flash the right spl/radio/recovery combo and should be good to go.
I try to flash the orange-1.58.73.2.nbh and I got a "Model ID Incorrect" error on verifying signature. I guess my way out is using a goldcard but my phone is useless right now. I looking toward to create one using my PC or a friend's phone.
Any suggestions? Thank you so much guys to help me bring back my phone from the graveyard...
Well... the goldcard is a MUST have. Without it you cannot flash the nbh image.
I'm trying to research how to create a goldcard without the phone but I did not get a procedure to do it... Do you know if I can use any other Android phone regardless the model and the carrier? some said CID numbers relies only on the SDcard you are using and the phone and carrier did no matter at all, but if that is true, why you can't use a program to get it from your sdcard reader? it seems like the only medium to get the number is through an Android phone...
Either way I will try using other android phone from a different carrier... for now is the only choice I got... I will keep you posted with my results...
grillonegro said:
why you can't use a program to get it from your sdcard reader? it seems like the only medium to get the number is through an Android phone....
Click to expand...
Click to collapse
You can .. if your computers sdcard reader exposes the CID to software.
Unfortunately most USB readers do not expose this value. (some older non USB versions have been known to)
Most HTC phones (and other embedded devices) on the other hand use a more direct interface to the sdcard and can get the value on both android and HTC.
FYI: even with the SDCard I think you will get that error on the oragne NBH.. (I don't think we can get around that one on a s=on SPL) it says that the rom is not for the sapphire.. if it works it is your best bet but I don't think it will.
It's kinda must... referring to how did it happen in the first place!
Hi all,
I created 2 goldcards (after the process I could copy the SAPPIMG.nbh to the SDCard from my PC without any problem), but still I get the Model ID Incorrect when I tried to flash it.
My question will be if you believe there is a problem with the goldcards or definitely as ezterry suggest is a problem beyond the goldcard issue...
Thanks again for all your help...
Goldcard issue :0)
Tomorrow I will buy a new microsd... Kingstone 2GB is what everyone recommends for the job... I will keep you posted with the results...
Hi all, sorry for the delay on the response but I have to order my memory online because I was tired to search it on local store without any luck.
Yesterday I got my new Kingston 2GB memory card, I made it a gold card, put the orange-1.58.7.nbh file on it, rename it to SAPPIMG.nbh and when trying to flash it, it said loading with multiple lines as always does but it did not start with the verification of the image but it just shows me the hboot option again, as it was restarting itself.
Any idea?
I've gone through a few threads already looking for more information. A week or so ago I tried to install the OTA update and for whatever reason it failed. Since then the phone has been a little funny and I had to factory reset it twice. Anyway, last night the phone locked up, turned off and went into a boot loop. I can communicate with the phone via fastboot and that's about it. I've tried updating via PD15IMG.zip but it fails and gives me a -pu problem which I'm assuming is partition related.
fastboot flash recovery recovery.img returns Failed(remote: image update error). And erasing it returns Failed (remote: erasing error!). boot recovery doesn't work either.
I've also tried fastboot erasing different sectors, but they all fail giving me a Failed (remote: erasing error!). I cannot fastboot format either.
I'm not sure if any of this information is relevant but:
Glacier PVT ENG s-off
Hboot - 0.85.2007 (PD1510000)
Microp-0429
Radio-26.03.02.26_m
emmc-boot
oct11 2010, 12:44:44
Image CRC
hboot: 0x812FF6d3
boot: 0xb2031a3f
recovery: 0x5cf7d794
system:0x8ed37a0e
Is this phone a lost cause or does anyone have any suggestions on any other things I may be able to try? Thanks!
For what I've read, fail PU means your phone is bricked (emmc fail).
I didn't see any solution for this.
You didn't, because there is none. OP, if you have "Fail-PU", your phone is dead. I believe you're read it enough times in enough threads, but wanted to make sure, so here, it's certain.
Time to sell it on eBay for what ever you can get... probably around 50
Sent from my SGH-T999 using xda premium
md1008 said:
Time to sell it on eBay for what ever you can get... probably around 50
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Wow, had no idea I could sell it. Any idea on what I'd need to replace in order to have a working phone again?
Main board, or just eMMC. But the replacement of eMMC is BGA resoldering - a procedure that can cost you up to $100. Preprogrammed eMMC costs around $20, but I didn't see any for MT4G, only for Desire S (which might be partition-compatible and might not). Search the net for the terms you're not familiar with, and you'll see what needs to be done.
Word. I already looked to see if I can find a main board, though it doesn't look like they're very easy to come by. I guess my best bet would be to find a phone whose screen broke and go that route. My phone as in great condition other than the emmc going bad.
[Thread will be back up]
This Thread is a WIP Thread open for discussion.
Please be patient, it IS being worked whether it's discussed or not in the thread.
Subscribe already
Oh, it's Christmas in June. :highfive:
ooooh this sounds interesting
Looking forward to this
Sent from my HTC One using Tapatalk 2
18th.abn said:
UNDER CONSTRUCTION
Big Thanks to all the devs who brought us all s-off. Its all because of their HARD work.
Beaups
Fuses
Revolutionary.io
anyone else working in the background ot that im unaware of at this time
Thank you to fnoji111 for providing the temporary hboot we are going to be using here.
S-OFF is MANDATORY. if you aint got it, git it!
WARNING - This is a simple procedure but can and will brick a device if the steps are not followed or if you explore deeper than you should during the Unlock. I am not responsible for any damage and HIGHLY suggest following all the steps through until the end.
Click to expand...
Click to collapse
Eagerly waiting to see how you gonna do it for sprint version in which we can't get any prompt to put unlock code.
i will give a shot here using my htc one sprint fill post a new feedback after im done
------
i got this error on flashing
C:\Users\XXXX\Downloads\Compressed\Root_HTC_One_Sprint\Root_HTC_One_Sprint>fastboot flash hboot enghboot.nb0
sending 'hboot' (2080 KB)...
OKAY [ 0.463s]
writing 'hboot'...
FAILED (remote: not allowed)
finished. total time: 0.499s
solnoy said:
i will give a shot here using my htc one sprint fill post a new feedback after im done
Click to expand...
Click to collapse
Do it?
---------- Post added at 07:39 PM ---------- Previous post was at 07:31 PM ----------
sending 'hboot' (2080 KB)...
OKAY [ 0.450s]
writing 'hboot'...
FAILED (remote: not allowed)
finished. total time: 0.484s
???
here is my info on my Htc One (Sprint)
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 1.00.20.0315
version-cpld: None
version-microp: None
version-main: 1.29.651.7
version-misc: PVT SHIP S-OFF
serialno: FA34AS9XXXXX
imei: 9900014656xxxxx
meid: 99000146xxxxx
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 3901mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
I will update op. Must be on fuses Moonshine hboot. He has a lot of work in the hboot and flashing restrictions are removed. With his hboot, the red text is also removed from splash screen.
I apologize, moonshine s-off/hboot is mandatory.
@18th.abn
Is that engineering hboot safe to just leave it on the phone permanently? I would love to have a permanent eng hboot than a normal updated hboot.
18th.abn said:
I will update op. Must be on fuses Moonshine hboot. He has a lot of work in the hboot and flashing restrictions are removed. With his hboot, the red text is also removed from splash screen.
I apologize, moonshine s-off/hboot is mandatory.
Click to expand...
Click to collapse
So thats why it didnt take
18th.abn said:
I will update op. Must be on fuses Moonshine hboot. He has a lot of work in the hboot and flashing restrictions are removed. With his hboot, the red text is also removed from splash screen.
I apologize, moonshine s-off/hboot is mandatory.
Click to expand...
Click to collapse
I used revone to S-off would you mind a quick and dirty explanation of how to install the moonshine Hboot Manually if that's possible?
problem right now is i dont have linux to flash that moonshine
Sorry gunny, all I can do is link to their work. Any modification/alteration of their work isn't supported or allowed. Wish I could help more there :-/
18th.abn said:
Sorry gunny, all I can do is link to their work. Any modification/alteration of their work isn't supported or allowed. Wish I could help more there :-/
Click to expand...
Click to collapse
No worries.
Doesn't hurt to ask, so I asked
Oh well. thanks for the work.
Riyal said:
@18th.abn
Is that engineering hboot safe to just leave it on the phone permanently? I would love to have a permanent eng hboot than a normal updated hboot.
Click to expand...
Click to collapse
It's highly unrecomended. Device won't fully boot on some varients. Also, moonshine has all the benefits of eng hboot without the added danger of tinkering to much in the eng hboot
can i run moonshin even though im already unlocked?
18th.abn said:
It's highly unrecomended. Device won't fully boot on some varients. Also, moonshine has all the benefits of eng hboot without the added danger of tinkering to much in the eng hboot
Click to expand...
Click to collapse
Yeah that's what I thought lol! So then I would ask the 2nd question... On what variant did this eng hboot came from?
And another thing... Couldn't you just dd the eng hboot instead of flashing it through fastboot? Did took a quick glance on moonshine distiler binary and seems like they're doing the same.
*Edit removed for safety of newbies *
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.13.3230.16.05
version-cpld: None
version-microp: None
version-main: 1.58.401.11
version-misc: PVT SHIP S-ON
serialno: FA4BP*******
imei: 352*************
imei2: 35*************
meid: 00000000000000
product: a5_dug
platform: hTCBmsm8226
modelid: 0P9C70000
cidnum: HTC__J15
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 0392e786
hbootpreupdate: 11
gencheckpt: 0
Recovery : Mirror
NandBackup : Mirror
Shokran Fash5 ya Ahmed El Zayat
thanks
Bajarbo w b2lk
touch lag
thanks for the file but could u please explain the steps becuse i restored the files first then i flashed the recovry but i still got the touch lag
edit i fixed it
ahmednash said:
thanks for the file but could u please explain the steps becuse i restored the files first then i flashed the recovry but i still got the touch lag
edit i fixed it
Click to expand...
Click to collapse
Try Change Recovery
It Works For Me
thank you :good:
ahmednash said:
thanks for the file but could u please explain the steps becuse i restored the files first then i flashed the recovry but i still got the touch lag
edit i fixed it
Click to expand...
Click to collapse
How did you fix touch problem?
ctnerdem said:
How did you fix touch problem?
Click to expand...
Click to collapse
my device is a5_dug i just instaled th ota update (don't know the number )but it was about 140mb and all the touch lag was gone
or u should try another nandroid backup
and soory for the late reply
ahmednash said:
my device is a5_dug i just instaled th ota update (don't know the number )but it was about 140mb and all the touch lag was gone
or u should try another nandroid backup
and soory for the late reply
Click to expand...
Click to collapse
can you upload your backup please
ctnerdem said:
can you upload your backup please
Click to expand...
Click to collapse
i'm sorry i can't my internet connectuon is so slow ,the only thing i can do is uploading the ota update (140mb)
You Are the best here thank you very very very very very very much
I was looking for CWM recovery Cause when i install it it was giving me black screen now u solve it and week ago i was looking for that software (1.58.401.11) i know that i will never find it but know u solve all my problems if i have 100000 thanx i will give it to You