Database Users

Can you help me figure out my provlem w/ Phone

Yesterday my phone just went pitch black when i was using it tge only lights on were the back button and the menu one beside the home button. Nothing worked. Power. 3 button both recovery and downloading. So i pulled the plug and took the battery out. When i turned it on i noticed my theme went back to the stock one. All my user data was erased. No apps were installed. Market maps and youtube have an icon on main page but say "application not installed on phone" when i click on it. My camera wont work either it says "Turn off usb storage before using camera" when i go to my gallery/music player/video player/voice recorder it says "SD card unmounted or not present" and when i use My files it says "Your phone does not have an SD card inserted"
Has anyone seen problems like this at all? If so can you tell me how to fix it please cause this phone was hella expensive and all it is right now to me is an expensive phone bill that i cant use features for...

Are you using an external sd card?
Sent from my GT-I9000 using XDA App

I have one but its not in the phone. I took it out a week or two ago.before it happened

Are you familiar with 'Odin' ??
Get your self a firmware and flash it, and see how you get on.
You do have the 3 button combo right ?

Yes my 3button combo works. and i know how to use odin. can you point me into the direction of the latest firmware for bell. cause if i need to return it they will see if its on their firmware and stuff.

When im using odin i get this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is that ok to have the 2 coms? cause everytime ive used odin before it has always had only 1

dont use PIT file unless you have all 3 files...
So remove the PIT and flash and you should be ok. Most firmwares now only come in 1 .tar file so dont worry about it...
If the flash doesnt fix your problem, you will need all 3 files and PIT, but im not familiar with bell firmwares so you may have to do a bit of searching for that one.

This is what i have.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and its stuck on that. I have the I9000UGJL2.tar file in the phone part but nothing is happening.
Will a hard reset bring it back to factory settings?

I have the I9000UGJL2.tar file in the phone part
Single file its PDA in Odin unless its a modem file .
jje

Ok well ****.... Odin didnt work. so im trying to spoof with kies right now but something very very weird is happening. it says instalising... and it goes like this 1...2...3...4... homescreen for a split second. then instalising... and it goes like this 1...2...3...4... homescreen for a split second. and repeat... is my phone kinda screwed at this point?

ok... well my phone is only showing
the first screen you see when you boot.
Galaxy S GT-1900
Samsung
Is it ****ed for good now?

Gordon_Jeffries said:
ok... well my phone is only showing
the first screen you see when you boot.
Galaxy S GT-1900
Samsung
Is it ****ed for good now?
Click to expand...
Click to collapse
No its not ****ed, dont panic.
Is your download mode still working ??? Do as i said earlier with all 3 Files and PIT.
Then in Odin CHECK RE-PARTITION and when you have all 3 files + PIT loaded i.e PDA, Phone, CSC, connect your phone (in download mode) and flash it.
Make sure you Have all 3 files and make sure they are in the right section. And also make sure the firmware that came in 3 files is supportive of Bell SGS
PIT goes in PIT
PDA goes in PDA
MODEM goes in PHONE
CSC goes in CSC

@Gordon_Jeffries
Please check the followings:
* Use only the original Samsung USB-cable.
* Restart your PC and move the USB cable to another USB-port.
* Without using Odin,put the phone on download mode and connect to your PC, let your PC install the drivers, disconnect when done.
* Start Odin and load the firmware file without a pit file and no re-partition.
* Re-enter download mode, if the phone is still on download mode then you need to hold the three buttons until the phone re-enters download mode, connect to the PC and flash the firmware.
* If the flash goes well then do a wipe/factory reset from recovery.

ok well i can get it to download mode. but i dont have the CSS and or phone. does anyone know what the most current up to date bell firmware is?

it doesnt have to be a new firmware release...
Does Bell not have a single firmware in all 3 files ??
as a last resort you can use darkys resurrection (odin version) That comes in just 1 .tar file and you can use 512PIT with it..
I have used it many times to get me fixed up.... And im sure its compatible with bell (but check first)

Ive tried everything. JL2, JK3, Jk4, JH2, JPY, Darkys resurection. nothing works it just continues never ending boot screen...

Gordon_Jeffries said:
Ive tried everything. JL2, JK3, Jk4, JH2, JPY, Darkys resurection. nothing works it just continues never ending boot screen...
Click to expand...
Click to collapse
Can you enter recovery mode? If you can then do a factory reset, if that does not help and you have a 16GB Internal SD-card, then it's very likely that Internal SD-card of your device is dead.

No i cant enter recovery mode anymore. and yes i have a 16gb internal SD-card.
thats what i was hoping it wasnt... ok well i phoned bell and they said they will bring it in for sercive.

Same problem here
I have the same problem here, but i have a I9000B (Brazil) i just want to take my phone back to normal, can anyone help me?
My actual firmware: 2.3.3 I9000BVJJWW2 (its the offical one, from Kyes)
I'm not familiar with odin, but if u give any tutorial that I can follow, will help alot.
Thanks

tjacobs said:
I have the same problem here, but i have a I9000B (Brazil) i just want to take my phone back to normal, can anyone help me?
My actual firmware: 2.3.3 I9000BVJJWW2 (its the offical one, from Kyes)
I'm not familiar with odin, but if u give any tutorial that I can follow, will help alot.
Thanks
Click to expand...
Click to collapse
What you could do, is go to samfirmware.com, register and search for i9000. Or if you want to download a i9000b rom, press this link: http://hotfile.com/dl/146652827/84f8d47/I9000BVJJV3_I9000BSAMJV2_SAM.zip.html
(password is: samfirmware.com)
Just use odin to flash.
Or: http://forum.xda-developers.com/showthread.php?t=1102881&highlight=+guide+odin
(PS, search is your friend )

[Help] BSOD!

hello,
well i just flashed the speedmod kernel on my samsung galaxy s i9000 and it went smooth, was rebooting but didnt get pass the sgs logo on boot up, well, i rebooted it after that without usb and now i got the black screen of death, can still get in the download mode, how to fix? :$
btw : already readed that threat of how to fix, and tried option a & b but didnt worked.

If this is what you have:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then:
hold the 3 key salute buttons to go back, with the USB cable plugged in, to go back to Download mode and flash back

how to flash back? i use odin :$

hanz1230 said:
how to flash back? i use odin :$
Click to expand...
Click to collapse
Just make sure you check "repartition" in Odin when you reflash...
Sent from my GT-I9000 using xda premium

hmm okay, but problem,, my odin wont go further in the process then :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..

hanz1230 said:
hmm okay, but problem,, my odin wont go further in the process then :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
Make sure you have a correct drivers installed and the Kies processes killed from running in the background.
Sent from my GT-I9000 using Tapatalk 2

Kurre said:
Make sure you have a correct drivers installed and the Kies processes killed from running in the background.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
ok, well so i can kill kies process, but how to install the driver? because i cant install it with kies because it wont connect with my sgs i9000 not in bsod and neither in download mode

nvm, got it working again and got benefits :
newer firmware and i also managed to root it now

S5 (SM-G900H) Stuck on Boot Logo?

I have looked at every single thread on how to fix this issue, and I have tried all versions of odin 9.x and up, different firmwares for this model, Booting into recovery, which fails, and flashing a recovery in odin. Everything that i try to do with odin results on getting stuck on "Initialization...." While it does not with my s4. Any Help?

And If I try to use Kies or Smart switch, it says device not supported, and if i go to emergency update, it downloads the firmware but stays at 0 percent when installing. I have tried multiple pcs, all on windows 10. I have access to linux if needed, and I have about 40 android cables in my house. I am open to options

piluvr said:
I have looked at every single thread on how to fix this issue, and I have tried all versions of odin 9.x and up, different firmwares for this model, Booting into recovery, which fails, and flashing a recovery in odin. Everything that i try to do with odin results on getting stuck on "Initialization...." While it does not with my s4. Any Help?
Click to expand...
Click to collapse
bro go to imei.info and ensure youre device is not clone

shahram Ali said:
bro go to imei.info and ensure youre device is not clone
Click to expand...
Click to collapse
This is the info.
this is my imei, says it is real.

piluvr said:
This is the info.
this is my imei, says it is real.
354223062073838
Click to expand...
Click to collapse
maybe the problem is that i am using micro usb 2.0 cables? I would have to buy a s5 cable.

piluvr said:
maybe the problem is that i am using micro usb 2.0 cables? I would have to buy a s5 cable.
Click to expand...
Click to collapse
dude do you have installed latest drivers?? and the problem not with usb 2.0 i only use 2.0

shahram Ali said:
dude do you have installed latest drivers?? and the problem not with usb 2.0 i only use 2.0
Click to expand...
Click to collapse
yeah, but just in case, send me your drivers.

Here is odins log:
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANE2_G900HODD1AND2_G900HXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation.."

piluvr said:
Here is odins log:
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANE2_G900HODD1AND2_G900HXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation.."
Click to expand...
Click to collapse
do you turned off retractive lock from security? can u send download mode picture?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If i disconnect my phone, it does this :
<ID:0/012> Get PIT for mapping..
<ID:0/012> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
EDIT: To clarify, after i unplug the s5, it suddenly starts getting pit partition

Flash pit then stock fimeware after that tell me results http://forum.xda-developers.com/attachment.php?attachmentid=2794808&d=1402604385

shahram Ali said:
Flash pit then stock fimeware after that tell me results http://forum.xda-developers.com/attachment.php?attachmentid=2794808&d=1402604385
Click to expand...
Click to collapse
<ID:0/020> Added!!
<ID:0/020> Odin engine v(ID:3.1100)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
Exact same thing. i put the pit in and nothing happens.

I'm sitting here constantly refreshing this page, so if anyone could help that would be amazing.

piluvr said:
I'm sitting here constantly refreshing this page, so if anyone could help that would be amazing.
Click to expand...
Click to collapse
G900H is Oct-Core, you need a special recovery for that model S5
Follow these instructions to get TWRP installed
http://forum.xda-developers.com/showthread.php?t=2725939
And remove your IMEI from previous posts, it can be used to clone your device / get your phone blocked

*Detection* said:
G900H is Oct-Core, you need a special recovery for that model S5
Follow these instructions to get TWRP installed
http://forum.xda-developers.com/showthread.php?t=2725939
And remove your IMEI from previous posts, it can be used to clone your device / get your phone blocked
Click to expand...
Click to collapse
Still stuck at initialization.

piluvr said:
Still stuck at initialization.
Click to expand...
Click to collapse
even kies not working?

shahram Ali said:
even kies not working?
Click to expand...
Click to collapse
it gets stuck at 0% installing. Should i leave it overnight?

piluvr said:
it gets stuck at 0% installing. Should i leave it overnight?
Click to expand...
Click to collapse
do you tried another pc?

shahram Ali said:
do you tried another pc?
Click to expand...
Click to collapse
yes, same problem, all windows 10

piluvr said:
yes, same problem, all windows 10
Click to expand...
Click to collapse
dude try reinstall drivers in kies
and take out sim and sdcard

S8 only booting into Download Mode

Hi Guys,
Strange thing happened yesterday. My unrooted Galaxy S8, sitting on the arm of the couch just turned itself off and wouldn't boot back up. I knew the battery had been low so I assumed it had run down. Upon plugging it into multiple chargers, I found the phone was a brick and not reacting at all. I left it plugged in overnight and when checking it in the morning I found it had booted into Download Mode. "Great", I thought, "I can work with this".
I held power and Vol Down for a couple of seconds to see if it would boot normally now, and it just powered off, totally unresponsive like the night before. I left it plugged in again and when I came home from work it was back in Download Mode. After plying with it for the evening, I've found it will only randomly boot into Download Mode after being off and unresponsive for a number of hours. Doesn't respond to any key combos when off (but keys are obviously ok as I can power down from Download Mode).
I've tried flashing the correct firmware from Sammobile via Odin but this fails every time. Odin sees the phone (COM0 or whatever) but seems to be unable to flash.
Any key combos or software anyone knows of that might help me breath life into the thing? Does Kies Firmware Recovery still exist or is that EOL these days?
I should note, I've rooted and installed custom ROMs etc on a countless number of phones in the past, but this one was untouched until I started having these issues.
Any help is appreciated.
Thanks

Original cable?
Latest Odin version?
4tlg.Firmware?
Other PC?
There were sometimes problems with Windows 10

bininga59 said:
Original cable?
Latest Odin version?
4tlg.Firmware?
Other PC?
There were sometimes problems with Windows 10
Click to expand...
Click to collapse
Yes, original cable. I have a second Galaxy (which is rooted) and managed to flash it using Odin fine using the exact same PC, cable & Odin so I don't think it's an issue on that side. Adding a screenshot from Odin to the original post, hoping someone may be able to help.
Thanks

BazmanFoo said:
Yes, original cable. I have a second Galaxy (which is rooted) and managed to flash it using Odin fine using the exact same PC, cable & Odin so I don't think it's an issue on that side. Adding a screenshot from Odin to the original post, hoping someone may be able to help.
Thanks
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://ibb.co/Lp1yCrB
Screenshot in link above. It sais re partitioning failed but I didnt select re partition. I have since tried selecting but this also gives an error.

I can not see the screenshot.
You can upload images below at> Manage Attachments <.

Deciphered linked screenshot: https://ibb.co/Lp1yCrB
Don't use the re-partition potion and avoid using PIT as those are not the cause of the phone being bricked. Which firmware are you using and what is the Sales (Region / CSC code) being displayed on download mode? Plus what is the AP SW REV line displaying as well?

benjamen50 said:
Deciphered linked screenshot: https://ibb.co/Lp1yCrB
Don't use the re-partition potion and avoid using PIT as those are not the cause of the phone being bricked. Which firmware are you using and what is the Sales (Region / CSC code) being displayed on download mode? Plus what is the AP SW REV line displaying as well?
Click to expand...
Click to collapse
Thanks. Initially I avoided trying to re partition but since it was giving me a partition failure and the phone is already bricked, I thought I might as well try (didn't work anyway)..
I haven't tried the PIT yet, but last night i found this thread below so I'm going to try that this evening.
https://forum.xda-developers.com/galaxy-s8/help/corrupted-pit-t3602079
The killer is that every time I try to flash something and fail, I have to wait about 4 hours for the phone to boot itself back into Download Mode, which makes troubleshooting difficult.
I'm using the latest Vodafone Ireland Firmware (CRLC) from Sammobile, which is the correct firmware for this device. As for the questions around CSC and AP SW REV, I can't say I saw any info like that on the download mode screen but will check this evening and post here any further information.
Thanks

So, unfortunately the phone has now stopped even booting into Download Mode every few hours. Looks like it has just bricked itself.
Funny that this is the first Samsung in years I haven't rooted or messed with and this happens! Will try bringing it to a Samsung store.

BazmanFoo said:
So, unfortunately the phone has now stopped even booting into Download Mode every few hours. Looks like it has just bricked itself.
Funny that this is the first Samsung in years I haven't rooted or messed with and this happens! Will try bringing it to a Samsung store.
Click to expand...
Click to collapse
Ok, back booting into Download Mode, everytime i try to flash any firmware in Odin, it start with Set Partition in the COM window and the below in the log:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5691 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
To be clear, I have not ticked Re-Partition or a PIT file and I still get the above. I also tried set the PIT and re-partition to no avail.
Anyone have any ideas of something to try?

Hey, Did you manage to fix this? I am having the same exact problem
BazmanFoo said:
Ok, back booting into Download Mode, everytime i try to flash any firmware in Odin, it start with Set Partition in the COM window and the below in the log:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5691 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
To be clear, I have not ticked Re-Partition or a PIT file and I still get the above. I also tried set the PIT and re-partition to no avail.
Anyone have any ideas of something to try?
Click to expand...
Click to collapse

[GUIDE][FRP 8.x | Oreo]Samsung Galaxy S7 Active (G891A) FRP Bypass

This entire process needed to remove FRP protection from your Samsung Galaxy S7 Active (G891A). Working on ANY Android 8.0 S7 Active devices!​
Essence of the method in the firmware COMBINATION.​
You need Russian Giude version? See this
Skill level - zero novice
It's really easy, but you need this:
Download Samsung Drivers
Download latest Odin (v.3.13.1 and hitght!)
Download COMBINATION firmware
Download stock firmware
DO NOT Use FRONT USB on PC! Only back USB panel!
DO NOT use cracket USB cabel
DO NOT disconnect phone, if you start flash and dont see green inscription PASS
-First, download THIS files
Ready?
*Swith the Download mode on your phone and connect to PC
1) Install Samsung drivers
2) Open Odin as Administator (Win 7 and high only!)
3) Click AP and Open COMBINATION file
COMBINATION
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Your phone connected on COM port?
NO? Reinstall Samsung Drivers and restart PC
YES? Good! Click "Start" and wait.
4) The "PASS" inscription will show up, then a phone will automaticaly reboot.
* Take your phone. You see FACTORY BINARY inscription? NO?! Open recovery mode, and do factory reset.
* Now, when you'r phone turned on, and you can say "WOHOO!" Because, it's 60% of this instruction!
5) Click here (view photo)
And you see classic settings.
Scroll to the end, open Developers setting( About Phone => Build number => a lot click on Build number line =>you see message )
Resturn to main settings menu and open dev settings
Flag the checkbox and dev seeting stay to active mode
Search and flag OEM Bootloader Unlock
Return main setting menu, open factory reset menu on the settings and do Factory Reset
Phone will reboot.
6) Power off phone and enter your phone to the download mode.
7) Connect your phone to PC and flash STOCK firmware
Don't now HOW?
Download STOCK firmware may be this
Open Odin as Administaror and look to my screenshot
Odin can Hang.
Again, check your phone on the COM port
Be sure to check back and click START
Wait for 10-15-20-25 minutes. Don't worry, it's normal. Wait for "PASS" inscription. Phone wiil automatically reboot again.
Power ON your phone and wait again for ~15 minute.
8) Power on your phone and ENJOY!!!
P.S. Good luck, I hope it was useful

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> COMBINATION___FA60_G891AUCU4ARL1_CL8026246_QB20892645_REV02.tar.md5 is invalid.
<OSM> End...
I tired download in Chrome, Firefox... Hot to fix i dont know.

zayatsv said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> COMBINATION___FA60_G891AUCU4ARL1_CL8026246_QB20892645_REV02.tar.md5 is invalid.
<OSM> End...
I tired download in Chrome, Firefox... Hot to fix i dont know.
Click to expand...
Click to collapse
Your phone model ?

I got frp locked man and its on G891AUCS5CSB1 update will it work with G891AUCS4CSB1 combination file you provided phones update released on February 27, 2019 according to the AT&T website -https://www.att.com/devicehowto/tutorial.html#!/stepbystep/id/stepbystep_KM1136420?make=Samsung&model=SamsungG891A
I also tried to flash combination file you provided but it failed with Odin error :- md5 error binary is invalid
Should it work if I redownload it because G891AUCS5CSB1 update still on android 8.0
Can I flash this to remove frp lock -https://www.google.com/amp/s/forum.xda-developers.com/s7-active/how-to/g891a-oreo-8-0-stock-att-odin-files-t3874735/amp/
Thanks... plz help if you can

[email protected] said:
I got frp locked man and its on G891AUCS5CSB1 update will it work with G891AUCS4CSB1 combination file you provided phones update released on February 27, 2019 according to the AT&T website -https://www.att.com/devicehowto/tutorial.html#!/stepbystep/id/stepbystep_KM1136420?make=Samsung&model=SamsungG891A
I also tried to flash combination file you provided but it failed with Odin error :- md5 error binary is invalid
Should it work if I redownload it because G891AUCS5CSB1 update still on android 8.0
Can I flash this to remove frp lock -https://www.google.com/amp/s/forum.xda-developers.com/s7-active/how-to/g891a-oreo-8-0-stock-att-odin-files-t3874735/amp/
Thanks... plz help if you can
Click to expand...
Click to collapse
you can download COMBINATION_ATT_FA60_G891AUCU5ASB1.zip
then flash stocck

Its works on g930FXXS4ESC1 ? Samsung s7 ?
I follow u step but isung this one COMBINATION FA60 G930FXXU5 but i dont have option OEM Bootloader Unlock only have debug mode on ..
factory reset and cache . instal stock rom but frp stil on phone ;/ why i dont have this ption od dev mode ? OEM Bootloader Unlock

Wont flash
Does anyone have a combination file for boot loader 6.
I am get the error message
Sw rev fail

Please can someone point me in the right direction I have an old S7, and on the recovery screen it says "8.0.0/R16NW/G930FXXU8EVG3". Which combination does it require to flash with Odin? Also which Stock Rom / Custom Rom would you recommend for it after the combination flashing?