Hi,
here is the flashable *.zip file wich installs latest Sony Bugfix Release of Stock 5.1.1 Lollipop ROM 23.4.A.0.570 (Japan), latest SuperSu v2.49 beta (works stable for me since weeks!) and latest NUT Dualrecovery 2.8.21 with read and write access to system. Because device is Wi-Fi only region doesn´t matter. Only difference is maybe pre installed bloatware by region.
Thx to PRF Creator and Flashtool.
UPDATE - FILE DELETED. Please use Release from kulvertti
Of course i tested the release before uploading on my own Device. So far no errors found after upgrading.
I am not responsible for any damage to your Device or your Data! Be careful and make a Backup before flashing!
Tested now for some hours. Runs very stable.
redlabour said:
Tested now for some hours. Runs very stable.
Click to expand...
Click to collapse
Thank you so much, downloading to give it a try now. Hope that "No Service" on the lock screen has been corrected.
---------- Post added at 09:56 AM ---------- Previous post was at 09:43 AM ----------
redlabour said:
Hi,
here is the flashable *.zip file wich installs latest Sony Bugfix Release of Stock 5.1.1 Lollipop ROM 23.4.A.0.570 (Japan), latest SuperSu v2.49 beta (works stable for me since weeks!) and latest NUT Dualrecovery 2.8.21 with read and write access to system. Because device is Wi-Fi only region doesn´t matter. Only difference is maybe pre installed bloatware by region.
Thx to PRF Creator and Flashtool.
Download: SGP511_23.4.A.0.570_1285-4558_R7C_ SuperSU2.49_NUT2.8.21.zip ( 1.25 GB )
Copy zip-file on SDCARD.
Go to recovery.
Install zip-file.
Reboot the system.
Of course i tested the release before uploading on my own Device. So far no errors found after upgrading.
I am not responsible for any damage to your Device or your Data! Be careful and make a Backup before flashing!
Click to expand...
Click to collapse
By the way, do you have the MD5 checksum of this file? I hate to download a corrupted file. Thanks.
No. The Checksum Creation is not needed and only optional at PRF Creator. Never needed it for myself.
I'd also like the MD5. After I download, I'll post it. But if anyone else already has it, please post.
Here's what I show:
d00b36c07fa696f5803eb7671be2c518
Obviously, it could have an error and be corrupted, but I expect it's right. I guess if I flash it OK, then we'll know.
Couldn't the "No service"in the lockscreen be fixed by a module in xposed, like Xperia Xposed? I know the author would have to add it, but there's no harm in suggesting it?
CAL7 said:
I'd also like the MD5. After I download, I'll post it. But if anyone else already has it, please post.
Here's what I show:
d00b36c07fa696f5803eb7671be2c518
Obviously, it could have an error and be corrupted, but I expect it's right. I guess if I flash it OK, then we'll know.
Click to expand...
Click to collapse
Thanks, that's exactly what I got too.
For SHA1, it is: ba2f453b13c77b848cac3ce32bd2616b0676ab3e
For SHA256, it is: dd3717a745833e53e10cb14700b29172efc76c2a15a6689329131daf0b847230
Now, I am going to flash and test it out.:laugh::good:
Flashed fine for me. Thanks, redlabour.
Gormsen said:
Couldn't the "No service"in the lockscreen be fixed by a module in xposed, like Xperia Xposed? I know the author would have to add it, but there's no harm in suggesting it?
Click to expand...
Click to collapse
Tested and did not see much difference, the "No Service" in the lockscreen still there. Sony is either blind or deaf - did not see the bug itself or not listen to the users.:crying:
quick question
Sorry for the amateur hour question, but I am 100% new to this rooting bussiness.
Do I need to Root my Z2 tablet before I do this?
Is there anywhere a ELI5 guide for someone who has never rooted a device before and is therefore ignorant about all the terms (Prerooted, ROM, Kernel, Flashing, etc)
my tablet is updated to 5.1.1 build 23.4.A.0.546
Sorry for being a pain, and thanks in advnce for any guidance.
BTW, I already tried using KingRoot and it fails at about 16%
MXCorp said:
Sorry for the amateur hour question, but I am 100% new to this rooting bussiness.
Do I need to Root my Z2 tablet before I do this?
Is there anywhere a ELI5 guide for someone who has never rooted a device before and is therefore ignorant about all the terms (Prerooted
Click to expand...
Click to collapse
Sorry but please watch the Forum and use the search. There are several Threads for you.
Can I install this on SGP512?
Sent from my SGP512 using XDA Free mobile app
kuroneko007 said:
Can I install this on SGP512?
Sent from my SGP512 using XDA Free mobile app
Click to expand...
Click to collapse
Yes....I did it in my SGP512......you will see SGP511 in about phone setting
kuroneko007 said:
Can I install this on SGP512?
Sent from my SGP512 using XDA Free mobile app
Click to expand...
Click to collapse
No gurantee. Better pack your own with the Tools from first Post. It's easy.
Just flashed .570 last night and this morning I'm not getting 5gHz Wi-Fi. My dual band router is serving both bands to other devices, so that works; it's successfully serving my SGP511 at 2.4gHz. Anybody else? More importantly, any ideas how to diagnose the problem (I'm stumped)?
Check your Router. No problems here using 2.4 and 5.
redlabour said:
Sorry but please watch the Forum and use the search. There are several Threads for you.
Click to expand...
Click to collapse
Already did, couldn´t find anyone willing to actually help a noob, thanks for taking the time to send me back to search.
MXCorp said:
Already did, couldn´t find anyone willing to actually help a noob, thanks for taking the time to send me back to search.
Click to expand...
Click to collapse
No problem, start from here: http://forum.xda-developers.com/showthread.php?t=2794175
Download and flash the dualrecovery, and you are almost there.
myeepad said:
No problem, start from here: http://forum.xda-developers.com/showthread.php?t=2794175
Download and flash the dualrecovery, and you are almost there.
Click to expand...
Click to collapse
Thank you so much, I will get to it right away.
Your help is quite welcome, have a nice day man.
Thank you so much, I will get to it right away.
Click to expand...
Click to collapse
You're being misguided here a little bit.
You will not be able to install dual recovery because you will not be able to gain root. Your device is having lollipop, so exploits used to for gaining root will not work in your case.
What you need to do is to downgrade from LP to some kitkat version where the exploits will work. Then you'll be able to install dual recovery and only after that you'll be able to flash pre-rooted lollipop.
To downgrade you need to use FTF from FTF collection (version prior to or equal 17.1.A.0.402)
http://forum.xda-developers.com/xperia-z2-tablet/general/ftf-collection-locked-unlocked-bl-t3061431
Related
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Download:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Were you on stock recovery but rooted when you got this OTA?
I got this Update today too.
BaghiXDA said:
Were you on stock recovery but rooted when you got this OTA?
Click to expand...
Click to collapse
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
I'm also getting the update in The Netherlands. Bought my phone online amazon.de :laugh:
patient81 said:
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
Click to expand...
Click to collapse
Here you go. Obviously remove the .txt extension.
Bec de Xorbin said:
Here you go. Obviously remove the .txt extension.
Click to expand...
Click to collapse
Thank you kindly.
drfr said:
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Currently uploading it ....
Here we go:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Click to expand...
Click to collapse
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
NextGenGTR said:
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
Click to expand...
Click to collapse
Well, I can, but can you tell me why are you asking?
I'm rooted and installed the stock recovery then tried doing the Ota (I'm on stock rom if it matters) and it gives an error, just "error" no more information during the installation process.
Anybody can help?
Sent from my XT1032 using XDA Free mobile app
./.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Yes, you have the right version of firmware for this OTA, don´t know why it´s failing for you, there´s too much variables, it´s hard to tell.
As to where the file I posted comes from - it´s right from my phone. Until today morning I was on French 4.4.4, then I flashed the German 4.4.2 firmware to look if I could catch the OTA and it really came, I pulled it from my /cache and posted here. Check out the MD5 sum: d289331e52d0f79d2bcc4b9b390ff338
It´s the same on my local copy, on the cloud copy I posted and also look here:
http://www.android-hilfe.de/7843052-post301.html
drfr said:
Well, I can, but can you tell me why are you asking?
Click to expand...
Click to collapse
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
NextGenGTR said:
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
Click to expand...
Click to collapse
I see, so mine is 3549.
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
drfr said:
I see, so mine is 3549.
Click to expand...
Click to collapse
loungedogg said:
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
NextGenGTR said:
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
Click to expand...
Click to collapse
Why so sceptical? Apart from a different dialer GUI, there´s not much difference you can really feel on 4.4.4, basically there are just some bug fixes.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
my phone:
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Perhaps you need to uninstall and remove the modules and the xposed from the system before updating. Xposed and the modules add / modify system files and other sources in the device. Make sure you unroot as the last step as well. Stock recovery is required to install the OTA successfully
drfr said:
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Click to expand...
Click to collapse
I just wanted to know, did you also had stock recovery or custom?
Hi
Here is flasable zip file wich install latest ROM 23.0.1.A.0.167, latest beta SuperSu v2.19 and latest beta Dualrecovery .154 for Tablet Z2 with read/write acces to system.
This is tested and works just fine though make nandroid backup before flashing.
Install it by flashing whole zip file with custom recovery. Wipes aren´t necessary but good practise.
Here is the link:https://mega.co.nz/#!EB4CiJgT!Tvav1NKMqhwnXNGBNU6-iIrRTNv0qJuOvHttGUlGnA0
Deodex patch for above rom to those who want to use modifications which are made only for deodexed rom´s.
This is tested and works just fine but make nandroid backup before flashing.
Warning: this will delete all files from system/app, system/framework and priv-app not just .odex files. That´s include Superuser.apk. So you will loose root if you don´t flash SuperSu after flashing deodex patch.
Install deodex patch by:
- flashing deodex.zip file in custom recovery,
- don´t reboot to system but flash also flashable Super.Su.zip file in custom recovery,
- don´t reboot to system but wipe at least dalvik-cache,
- reboot to system.
Here is the link to deodex patch: https://mega.co.nz/#!0BJyhJZC!LGISUimx7-YQFQrE5cVisS7R-87bRiJLraUAcxGyIIw
If you need to download SuperSu you will find download links
for stable v2.16 here: http://download.chainfire.eu/supersu
for beta v2.19 here: http://download.chainfire.eu/593/SuperSU/BETA-SuperSU-v2.19.zip
Credits:
@Androxyde
@Chainfire
@Nut
@LaguCool
@zxz0O0 @AndroPlus
Thanks, this will save a lot of time
I will try this thanks
This work on my SGP561?
Sent from my SGP561 using XDA Premium HD app
I have tried and root works, everything's fine, except audio, is too low and when is turning off, take a long time to turn it off, even I have to force off i dont know why it happens...
Thanks very much for this. Much better than having to unlock bootloader etc so we get to keep root. Gonna flash it to my sgp512 and report back. Is build.prop the only thing I need to change afterwards to make it look like an sgp512.
Thank you very much! I'm gonna try it...
Edit:
Works great!
smarcisin said:
This work on my SGP561?
Sent from my SGP561 using XDA Premium HD app
Click to expand...
Click to collapse
Thank´s all for you feedback.
I don´t think this will work on your device. Different hardware.
rokrd1579 said:
I have tried and root works, everything's fine, except audio, is too low and when is turning off, take a long time to turn it off, even I have to force off i dont know why it happens...
Click to expand...
Click to collapse
No such problems here. It might help if you do wipes.
SANGER_A2 said:
Thanks very much for this. Much better than having to unlock bootloader etc so we get to keep root. Gonna flash it to my sgp512 and report back. Is build.prop the only thing I need to change afterwards to make it look like an sgp512.
Click to expand...
Click to collapse
Haven´t tested this. As far as I know only difference is memory size.
Yeah it works fine. Way better than an FTF! Sony PC companion and a few other apps report it as SPG511 instead of SGP512 and it annoys me! I need to edit the build.prop to hopefully fix this. And I can confirm I too get the bug where the device won't sleep when you shut the factory case. It wakes it though! I'm sure Sony will release an update to fix it soon.
Just wanted to say thanks and let everybody know that you get a writable system partition with this Rom. The update worked fine and I must still rooted with a locked bootloader.
The only problem with this update is that the screen stays on if I close the case but I guess Sony will fix this some time.
SANGER_A2 said:
Yeah it works fine. Way better than an FTF! Sony PC companion and a few other apps report it as SPG511 instead of SGP512 and it annoys me! I need to edit the build.prop to hopefully fix this. And I can confirm I too get the bug where the device won't sleep when you shut the factory case. It wakes it though! I'm sure Sony will release an update to fix it soon.
Click to expand...
Click to collapse
Jeddix said:
Just wanted to say thanks and let everybody know that you get a writable system partition with this Rom. The update worked fine and I must still rooted with a locked bootloader.
The only problem with this update is that the screen stays on if I close the case but I guess Sony will fix this some time.
Click to expand...
Click to collapse
Thank´s for you feedback. I made most of these files for my personal use but happy that my work helps other´s too.
Yes I make small chance to @Nut´s dualrecovery installer and so we have system RW.
About that bug with Sony´s official case, I hope Sony will fix that soon.
Gonna flash this now is there anyway to make remote play ps4 work with supersu app installed can we hide the supersu app from it or what?
RJASSI21 said:
Gonna flash this now is there anyway to make remote play ps4 work with supersu app installed can we hide the supersu app from it or what?
Click to expand...
Click to collapse
What a great mod been waiting ages for root on this ive gotta question though I noticed theres a fotakernal.elf and a kernel.elf in the zip do I need to flash those and if not how come the sony boot up logo doesnt have the new one with the bigger sony logo and xperia below I know thats backed into the kernel and last thing is is it possible to deodex this firmware? Thats my questions I love this pre rooted update just a few things I wanna know about thanks for this!
kulvertti said:
Thank´s for you feedback. I made most of these files for my personal use but happy that my work helps other´s too.
Yes I make small chance to @Nut´s dualrecovery installer and so we have system RW.
About that bug with Sony´s official case, I hope Sony will fix that soon.
Click to expand...
Click to collapse
I just want to let you know that I have the official case from Sony, the 23.0.1.A.0.167 firmware and I don't have this problem of screen staying on while closing the case.
For witch reason do you think it's a Sony bug ?
RJASSI21 said:
What a great mod been waiting ages for root on this ive gotta question though I noticed theres a fotakernal.elf and a kernel.elf in the zip do I need to flash those and if not how come the sony boot up logo doesnt have the new one with the bigger sony logo and xperia below I know thats backed into the kernel and last thing is is it possible to deodex this firmware? Thats my questions I love this pre rooted update just a few things I wanna know about thanks for this!
Click to expand...
Click to collapse
You need to flash everything in that flashable.zip file. Wipes are optional but good practice.
To answer your second question I already made deodex patch for this firmware. Testing it right now and if it´s okey I can share it with you if you want.
jef_k said:
I just want to let you know that I have the official case from Sony, the 23.0.1.A.0.167 firmware and I don't have this problem of screen staying on while closing the case.
For witch reason do you think it's a Sony bug ?
Click to expand...
Click to collapse
Wel two reasons. This is Sony stock firmware just added root and custom recovery. Other reason is that there is report in Q & A section about same problem after OTA update to .167 firmware. If you now something more about this please share.
RJASSI21 said:
Gonna flash this now is there anyway to make remote play ps4 work with supersu app installed can we hide the supersu app from it or what?
Click to expand...
Click to collapse
Don´t have ps4 so can´t test it. I know there is xposed module called RootCloak which can hide root for some app´s but reported that not all of them.
kulvertti said:
You need to flash everything in that flashable.zip file. Wipes are optional but good practice.
To answer your second question I already made deodex patch for this firmware. Testing it right now and if it´s okey I can share it with you if you want.
Wel two reasons. This is Sony stock firmware just added root and custom recovery. Other reason is that there is report in Q & A section about same problem after OTA update to .167 firmware. If you now something more about this please share.
Click to expand...
Click to collapse
Ok, I don't knew that it was reported with the fully stock firmware.
I've updated my tab with PC Companion. Maybe it's the reason why I don't have this problem.
Anyway, thanks for the answer and for sharing your work.
I added deodex patch to op for this rom. Anyone who are going to try it should read instructions carefully.
kulvertti said:
You need to flash everything in that flashable.zip file. Wipes are optional but good practice.
To answer your second question I already made deodex patch for this firmware. Testing it right now and if it´s okey I can share it with you if you want.
Wel two reasons. This is Sony stock firmware just added root and custom recovery. Other reason is that there is report in Q & A section about same problem after OTA update to .167 firmware. If you now something more about this please share.
Click to expand...
Click to collapse
Ok then i might try that
---------- Post added at 03:26 PM ---------- Previous post was at 03:09 PM ----------
kulvertti said:
Don´t have ps4 so can´t test it. I know there is xposed module called RootCloak which can hide root for some app´s but reported that not all of them.
Click to expand...
Click to collapse
ok i tried rootclock didnt work
---------- Post added at 03:29 PM ---------- Previous post was at 03:26 PM ----------
kulvertti said:
You need to flash everything in that flashable.zip file. Wipes are optional but good practice.
To answer your second question I already made deodex patch for this firmware. Testing it right now and if it´s okey I can share it with you if you want.
Click to expand...
Click to collapse
you know how you said flash everything in the zip that includes kernels right but how do i flash.elf kernels if im on locked bootloader is it possible to enter fastboot on lockedbl i dont wanna brick messing with kernels?
I flashed the zip on my SGP512 (dirty flashed over 17.1.2.A.0.314, only wiped cache and dalvik) and everything works perfect (my system info now tells me that I have a SGP511, but I couldn't care less, my device still has 32GB and not just 16GB)
thanks a lot! :good:
greetings
MJFox
For rooting 14.4.A.0.157 update go to this thread by @Waledac but use following kernels for your device (Z1 Compact):
MOD EDIT @gregbradley
Please re-upload to another download site that does not require a redirect to a commercial site.
Please check your PMs
Thread closed until this is fixed
Thanks that worked fine for me,
i finally took the kernel only from the customized_de Firmware, don't know if there is any difference between these files.
My Z1C was rootet, then the Update to x.157 came and i couldn't update it via OTA or PCC. So i flashed the new Firmware with the flashtool and my root was gone.
All other Root Tools like towelroot, newroot or easyroottooll didn't work.
So it finally worked with your little instruction. Thanks!
Root is back
Thanks alot. After upgrading to .157 via PC Companion (OTA didn't work) I lost my root. This brought it back, while all other tools failed.
With another firmware
I update myphone to 157 via flashtool but with a BAL firmware, is this solution still working? it doesn't matter if my actual firmware is customized or not?
kevingcfcb88 said:
I update myphone to 157 via flashtool but with a BAL firmware, is this solution still working? it doesn't matter if my actual firmware is customized or not?
Click to expand...
Click to collapse
yes it works for all models of Z1c and all customized firmwares
it doesn't matter which branded/unbranded/customized ,... firmware flashed on your device!
Done root
Jamal_RS said:
yes it works for all models of Z1c and all customized firmwares
it doesn't matter which branded/unbranded/customized ,... firmware flashed on your device!
Click to expand...
Click to collapse
Done!!! Thanks!!!!
random reboot
Fllowed the steps, used the proper kernel from this thread and I get only Reboots after screen lock appears...
Any ideas?
Is there something new?
It worked perfectly for me
Thank you very much
Thanks for the kernels..
Hi,
I was on 108. Updated to 157 through PC companion, lost root and got root back by following the steps in the OP link with the files provided here. A couple of questions I have:
1. How to get CWM back?
2. Is it safe to apply mods for 108 on this such as the mod for a single screen status bar, dark apps for dialers etc?
Thanks for the work and for any insights.
apv
hard brick?
followed the linked guide, but flashed the 108 kernel for the big z1 on my z1c, and now phone wont boot. Is it possible to fix that?
---------- Post added at 02:04 AM ---------- Previous post was at 01:06 AM ----------
never mind, managed to fix it with flashtool, even though I probably was REALLY close to a hard brick (no boot, no flash mode, just fastboot (blue led))
worked for me too thanks!
although I couldn't download the files from the OP I got them from Xperifirm..
the OTA wouldn't verify (not deodexed) so had to update from PCC and follow this..
I used the CE1 version from Xperifirm..
Sent from my D5503 using XDA Free mobile app
apv5 said:
Hi,
I was on 108. Updated to 157 through PC companion, lost root and got root back by following the steps in the OP link with the files provided here. A couple of questions I have:
1. How to get CWM back?
2. Is it safe to apply mods for 108 on this such as the mod for a single screen status bar, dark apps for dialers etc?
Thanks for the work and for any insights.
apv
Click to expand...
Click to collapse
Update: Flashed 108 kernel again, verified still rooted, installed CWM following info available at http://forum.xda-developers.com/showthread.php?t=2261606
Subsequent to that, flashed 157 kernel again.
Now having the 157 kernel, with root and CWM and have been flashing various mods that were working earlier on 108 with no issues so far (have installed the dark apps mod for clock, dialer, calender etc and the mod for having a single tab notification/status bar with 6 icons in a row).
Been about 5 days since I did this and so far, everything is working fine.
APV..
Worked like a charm. Thank you!
Jamal_RS said:
For rooting 14.4.A.0.157 update go to this thread by @Waledac but use following kernels for your device (Z1 Compact):
D550X_14.4.A.0.108_KernelOnly.ftf
D550X_14.4.A.0.157_KernelOnly.ftf
Click to expand...
Click to collapse
Worked thank you
help
And after flashing the first kernel my phone has only black screen,although still powers on and i can connect it to pc with usb,but the screen is always black what can i do?and SONY UPDATE SERVICE not work anymore
PLEASE HELP
download link for D550X_14.4.A.0.157_KernelOnly.ftf is dead - no connection to the server
EDIT: after 10 times the dl worked ...
Jamal_RS said:
For rooting 14.4.A.0.157 update go to this thread by @Waledac but use following kernels for your device (Z1 Compact):
D550X_14.4.A.0.108_KernelOnly.ftf
D550X_14.4.A.0.157_KernelOnly.ftf
Click to expand...
Click to collapse
Currently these kernel downloads are down, the opizo.com domain seems to have expired...
This domain name expired on Nov 21 2014 08:35AM
Click to expand...
Click to collapse
This was like hours ago, just my luck!
Can any of the earlier adopters please share the previously downloaded kernel files?
evilRafael said:
Currently these kernel downloads are down, the opizo.com domain seems to have expired...
This was like hours ago, just my luck!
Can any of the earlier adopters please share the previously downloaded kernel files?
Click to expand...
Click to collapse
http://uploadboy.com/qi6wxqmx249a.html
http://uploadboy.com/qgeqzk7juoaf.html
_______________
Sent by PHone
ady3004 said:
And after flashing the first kernel my phone has only black screen,although still powers on and i can connect it to pc with usb,but the screen is always black what can i do?and SONY UPDATE SERVICE not work anymore
PLEASE HELP
Click to expand...
Click to collapse
Hi! Have you found the answer? I'm in the same situation, maybe someone can help!
My GPe m7 just got the update notification. I pulled the file from /cache, and here it is.
The SHA1 checksum is in the filename, bad1c593ad07005d8e82754c36caa7e7db9b6cc2. This is not a test release or a beta, so as far as I can tell, I'm the first uploader! My phone is the international m7, running 4.4.4.
NOTE: this is an OTA from 4.4.4 to 5.0.1. It requires the stock recovery from 4.4.4, and so will cannot be installed by people that rooted or manually converted their phone to the Google Play edition. (This means me, in fact. I can't install this! But I'm uploading it in the hopes that a developer can apply the patches manually and make a flashable ROM.) This includes firmware, so installing as a Nandroid backup may or may not work.
EDIT: people in this thread have already uploaded the file and are trying to install it. I suggest browsing there, because here in this thread we haven't figured it out yet!
Can you post a nandroid
Thealshear said:
Can you post a nandroid
Click to expand...
Click to collapse
Plssssssssss system partition
@poon
PLEEAAASSSSEE KERNEL
Link is diwn unfortunately. Dropbox disabled it because it caused to much traffic
I have it. Anyone intrested?
Attached is a picture of the files in the ZIP
WiiiLDFARMER said:
Link is diwn unfortunately. Dropbox disabled it because it caused to much traffic
Click to expand...
Click to collapse
Link has been changed to androidfilehost, so you can try again. And unfortunately, the installer requires the stock GPe recovery, version 4.4.4. Does anyone know where to find that? I found 4.4.2's recovery by searching the internet, but that doesn't help.
wittereuzz said:
@poon
PLEEAAASSSSEE KERNEL
Click to expand...
Click to collapse
Need the Rom first downloading haha
TheRinseM said:
I have it. Anyone intrested?
Attached is a picture of the files in the ZIP
Click to expand...
Click to collapse
If that is a nandroid, yes, yes I am very interested
---------- Post added at 09:40 PM ---------- Previous post was at 09:39 PM ----------
poondog said:
Need the Rom first downloading haha
Click to expand...
Click to collapse
Make sure you grab a nandroid for me, I need this gpe goodness now
I have an initial stock"ish" kernel done already, but still need a nandroid/system dump, I can't flash Gsm as is.
Or I prefer not to anyways...
I'm sure poon won't let you guys down, but he has to have the rom to even test on first, haha.
As do I.
Stock OTA straight from Google is here: LINK
fenstre said:
Link has been changed to androidfilehost, so you can try again. And unfortunately, the installer requires the stock GPe recovery, version 4.4.4. Does anyone know where to find that? I found 4.4.2's recovery by searching the internet, but that doesn't help.
Click to expand...
Click to collapse
Thanks! Downloading now.
Kernel source is up at htcdev also...
how i can convert my htc one m7 sense 4.4.3 to a GPE Lollipop?
here some links to ota download
h**ps://twitter.com/LlabTooFeR/status/540777540907200512
h**ps://twitter.com/LlabTooFeR/status/540743784179724289
i dont know if works
me too but cant wait did try lollipop cm12 but returned to old Carbonrom so i could use your latest cm kernel v32 i think it lasts almost 40 hrs with 3 hours screen on time
Looks like I'm behind the game! The people in this thread are already trying to figure out how to install this: http://forum.xda-developers.com/showthread.php?p=57266830#post57266830
on cm12 i have gotten 3 hours and 2 minutes screen on time before i decided to put it on charge at 3% battery
For which CID is this OTA? GOOGL001?
Bruce666 said:
For which CID is this OTA? GOOGL001?
Click to expand...
Click to collapse
just use supercid which is 111111
dc959 said:
just use supercid which is 111111
Click to expand...
Click to collapse
Actually, supercid is 11111111 (8 1's)
i manually converted to GPe and flashed this OTA
Good news, seems that the new FW 28.0.A.8.260 is rolling out today! First devices got that update in xperia firm, so lets hope for bugfix and better touch response!
Just downloaded and flashed via flashtool/xperia firm ..... no MM ... minor system update with bugfixes ... nothing new here ... Better performance scrolling, wiping etc. No more lags with nova launcher. Touch also seems better on first sight.
Thank you ! One question, seems that pc companion update is not working today...update check doesn´t work, maybe problems on sony´s side?
It offered me the update here in Austria with Bootloader unlocked Generic German FW .... But i couldn install because of the unlock so i went the flashtool/xperia firmware route ....now i miss the root on the new update -.-
Sent from my LG-H815 using XDA Free mobile app
Youre right bro!!! Seems good news....
Fingers crossed hoping a better keyboard touch response and optimized RAM managing.
Edit: After installing it, noticed an smoother screen scrolling and an AWESOME touch response, even with a 0.3mm thick tempered glass screen protector, the keyboard response is Perfect!!!
Good Job Sony.
Just Rooting W/O unlocking left
Hi !
Do you think i can skip .251 and wait the Z4 will propose me the .260 directly OTA ?
Or should I first go through .251 to be able to get to 260
I have not yet upgraded to 251 because of the touch issues...
Thanks.
kristofior said:
Hi !
I have not yet upgraded to 251 because of the touch issues...
Thanks.
Click to expand...
Click to collapse
It should be no problem to flash directly to .260 with flashtool if the touch issues are better. Will update my device today with flashtool as pc companion don´t give me that option since yesterday...maybe the servers from sony mobile are not reachable within pc companion but flashtool and/or xperiafirm is the answer
Mr. Schnabel said:
Just downloaded and flashed via flashtool/xperia firm ..... no MM ... minor system update with bugfixes ... nothing new here ... Better performance scrolling, wiping etc. No more lags with nova launcher. Touch also seems better on first sight.
Click to expand...
Click to collapse
Where can you download the FW?
Wreath said:
Where can you download the FW?
Click to expand...
Click to collapse
You can find all information in this thread:
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
It´s very easy
SirRobin78 said:
You can find all information in this thread:
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
It´s very easy
Click to expand...
Click to collapse
Ok, thanks!
---------- Post added at 03:03 PM ---------- Previous post was at 02:03 PM ----------
SirRobin78 said:
You can find all information in this thread:
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
It´s very easy
Click to expand...
Click to collapse
Not enough easy for me
Should you create the ftf file with or without the .ta files?
I tried without but got an errror when flashing my tablet. Some guides says with .ta and some says without.
Thanks!
Wreath said:
Should you create the ftf file with or without the .ta files?
I tried without but got an errror when flashing my tablet. Some guides says with .ta and some says without.
Thanks!
Click to expand...
Click to collapse
You should create the ftf file with all the files downloaded with xperiafirm, than everything should work
androplus kernel is working on update, so I really hope that someone will make a flashable -maybe prerooted- image for TWRP.
I finally rooted+recovery after months of waiting, I'm really too lazy to restart from a FTF
One day after update my FW i think i can say it´s an improvement in touch! No problems so far will hope this problem is finally resolved!
Does anyone know if it would be safe to flash another region firmware to my tablet?
Needing this update but hasn't been released to me yet.
Mine has carrier branded firmware, they are infamous for releasing updates VERY slowly, if at all.
If it is safe, which region would you suggest?
I live in Australia.
no problem with WiFi tablet SGP712
if it would be safe to flash another region firmware to my tablet?
Click to expand...
Click to collapse
Choose any FTF with should work with your preferred character set.
With the LTE versions there could be some differences with enabled radio bands or not. I would try a HK version first.
Head over to xperia cross devices. There you'll find a thread about unlocking all radio bands. Dunno if it works with SGP771.
DHGE said:
Choose any FTF with should work with your preferred character set.
With the LTE versions there could be some differences with enabled radio bands or not. I would try a HK version first.
Head over to xperia cross devices. There you'll find a thread about unlocking all radio bands. Dunno if it works with SGP771.
Click to expand...
Click to collapse
Thanks for your help.
I am going to flash a HK version today and see how I go.
Is there many differences?
This won't affect having an Australian BKB50 will it?
(Sorry for so many questions, I'm new to this)
[This won't affect having an Australian BKB50 will it?
Click to expand...
Click to collapse
you will tell us
So far I have flashed CH, central Europe and DE without any problems to my SGP712.
And this tablet has seen several continents (not AUS).
DHGE said:
So far I have flashed CH, central Europe and DE without any problems to my SGP712.
.
Click to expand...
Click to collapse
I am having trouble getting it to boot into flashmode.
Every time I try, it just turns on?
I have reinstalled drivers, completed a factory reset.
It is driving me crazy!
Any ideas?
EDIT: I got it. Ended up holding down volume down while it booted off and it worked.
Thanks for answering all my questions
I appreciate it!
Jacobbby said:
I am having trouble getting it to boot into flashmode.
Every time I try, it just turns on?
I have reinstalled drivers, completed a factory reset.
It is driving me crazy!
Any ideas?
EDIT: I got it. Ended up holding down volume down while it booted off and it worked.
Thanks for answering all my questions
I appreciate it!
Click to expand...
Click to collapse
No .260 in the UK yet so I fancy "flashing". Just one question, I understand that I can use firmware from almost anywhere but what does "customized" mean in the Xpreifirm tool? I have an unbranded SGP712 so don't suddenly want to be locked into a vendor's bloatware!
Thanks
A word of caution if flashing an ftf. Make sure MXTP is disabled - especially if you reset after flashing or you will brick your tablet. This because I was stupid and forgot, resulting in my tablet having to go away for repair. Point of note - Sony UK offered to fix it but quoted 7 - 10 days turnaround. O2 did it in 3.
Sent from my SGP771 using Tapatalk