sm G800f rooting guide :) - Galaxy S5 Mini General

hey everyone figured id write up a quick little guide on rooting your s5 mini model SM-g800f on android 4.4.2
lets crack on and I hope it helps you out
this is my first guide so feedback is greatly appreciated
Things you are going to need
before you begin you will need a few things
1. Your device ( for this guide I am focusing on the sm-g800f in particular)
2. a USB cable and access to a pc
3. files from this site https://autoroot.chainfire.eu/ (credit to : chainfire)
4. Samsung USB drivers (i recommend Kies for this)
Device Prep
ok so you have all that you need lets crack on
firstly you will need to download the files from the link above and extract the folder to your desktop
now on your device you need to put it into download mode after plugging it in
to do this simply plug your device into the USB port on your PC and turn it off
then hold volume down , home and power.
if done right you will see a warning screen just press volume up to confirm you know what you are doing
The Root
once your device is connected and in download mode (see above) you are ready to roll
simply right click odin and run as administrator you should see the box in the top right of Odin is blue and say Com 0 connected or similar.
check the box next to pda and click the PDA button.
from here select the auto root file and click start
that's all there is to it
let it work its magic and when your device reboots it should say updating android if you haven't rooted before just relax this is normal and it is simply installing superuser to your device
Post rooting tips&apps
so you are rooted eh?
well done the hard part is over from here i personally always do the following
tap on superSU and you will be prompted to disable Knox security ( Knox limits what you can do once rooted disabling it makes your life easier)
i also usually install x posed and busy box as well as lucky patcher
if this is too much to read I've made a quick video guide too this is me doing the entire rooting process from start to end and worth a look of anything stumps you
https://www.youtube.com/watch?v=jcggfrq-WzE

Will I lose the warranty?

Yes
Gesendet von meinem SM-G800F mit Tapatalk

there is a new G800FXXU1AOG2
will the root work on it?

Yes it works on AOG2 too.

Is it possible to select invisible rooting? In some of the Cyanogemod OSs you can toggle between visible/invisible rooting.
Reason being if it's visibly rooted, then I am not allowed to use it on the corporate email service (detected by Airwatch).

Worked perfectly for me, thank you

WIll this work on the brand new 5.1.1 ?

this worked om my aog2, thanks for the post

What Android version did u have installed?

firmware upgrade encountered an issue. please select recovery mode in kies & try agai
firmware upgrade encountered an issue. please select recovery mode in kies & try again . j'ai eu ce message apres avoir fait par odin ,comment réparer cela , kies ne reconnais pas le s5 !
avez vous une soluce ,grand merci a vous :confus::confus:
S5 SMG800F

Morthawt said:
WIll this work on the brand new 5.1.1 ?
Click to expand...
Click to collapse
Same question here.

Stock rom. Not tried it with that new one

tonemgub1 said:
Same question here.
Click to expand...
Click to collapse
did you find out if this works on 5.1.1?

No, on the website https://autoroot.chainfire.eu/ only files for 4.4.2 are listed and I finally got my device rooted with the app Kingroot. In a different thread some user announced to write an instruction for 5.1.1 g800f bit still nothing has happened.

H!
have a g800fxxu1bpc3 on 5.11 Can i use root method form post no.1 with cf autoroot ?

Just tried it today on my stock 5.1.1 S5 mini (G800FXXU1BPC3) and it worked like a charm with the latest files from ChainFire.
Thanks a lot for the tutorial.

jimmay12345 said:
tap on superSU and you will be prompted to disable Knox security ( Knox limits what you can do once rooted disabling it makes your life easier)
Click to expand...
Click to collapse
Hi,
Nice guide. My G800F is now rooted. Thanks much!
However, when I go into SuperSU it doesn't prompt me about Knox. I wish I could disable it from there.
thanks!

man i have a g800f with 5.1.1 can i root it with that procedure or not?

Will it wipe my Samsung S5 mini when using this method? Or will it just root and everything continues to work as installed?

Related

[Q] cant root i9505 4.4.2

Hello everyone,
I apologise if, it probably is, my post is in the wrong place. I am very new to forums and cant seem to find excactly what I'm looking for in this sea of information. I have been trying for over a week now to root my Galaxy S4 which is running 4.4.2 I have followed many tutorials but none seem to work. My latest folly, with ODIN 3.09, is fruitless. Before I go any further I'm wondering if it can be rooted in the first place. My main reason for rooting, as this ROM is quite nice, is to rid the phone of a ton of bloatware and try to improve the battery life, not to mention use superior apps. I'm a novice at this stuff but wouldn't bother others if I could manage it myself. Could some kind soul give me advice on where I'm going wrong, if indeed it is able to be rooted. Also, point me in the correct direction of an appropriate thread if this one is wrong?
Many thanks in advance
Here are the details of my phone (UK version)
GT-i9505
4.4.2
Baseband version - I9505VJUFNB2
Kernel version - 3.4.0-718801
Build number - KOT49H.I9505VJUFNB2
When I'm using ODIN 3.09 I do not get the COM port light up the appropriate colour (yellow I believe) but I do get the "ADDED" text.
Can someone point me in the right direction please? I will be extremely grateful, thank you.
I also have this information on the download screen of my phone, some of which I haven't seen referenced elsewhere, which makes me think it can't be done on this phone or I have missed somnething about the root process.......
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: Ox0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE enabled
Many thanks in advance
Craig
1. Your phone have to be in DOWNLOAD MODE for flash through ODIN.
2. You can try to install the latest drivers for ur phone: HERE
Joku1981 said:
1. Your phone have to be in DOWNLOAD MODE for flash through ODIN.
2. You can try to install the latest drivers for ur phone: HERE
Click to expand...
Click to collapse
thanks for the reply. my phone is/was in download mode, the last part of my post describes that and what is displayed (on the top left) of the screen and as far as I'm aware (Kies3 installed, Dev mode activated & debugging on) all appropriate drivers are installed.
goodboybond said:
thanks for the reply. my phone is/was in download mode, the last part of my post describes that and what is displayed (on the top left) of the screen and as far as I'm aware (Kies3 installed, Dev mode activated & debugging on) all appropriate drivers are installed.
Click to expand...
Click to collapse
You dont attach any pic of ODIN showing the errors... and what u are using for root ur phone? The unique that works is CF-Auto-root and this will void ur warranty
Joku1981 said:
You dont attach any pic of ODIN showing the errors... and what u are using for root ur phone? The unique that works is CF-Auto-root and this will void ur warranty
Click to expand...
Click to collapse
I'll post a screenshot when I next get a chance. the phone is out of warranty now.
Success :victory: !!! After uninstalling and reinstalling the drivers from the link you kindly posted it worked. I now have a rooted S4 i9505 4.4.2 Thank You! :good:
Since then I have been trying to educate myself on the ways of the force. My main reason for rooting the phone was to remove the many apps on the phone I had no desire to use. However, it seems I have opened up a large can of worms and may have bitten off more than I can chew I'm currently trying to work out how to flash the appropriate recovery image on to my phone because it is not supported by Rom Manager All the links to the relevant information I am reading are dated way back to last year and beyond so I am unsure whether I am following the correct procedures. I have used Titanium Back Up to back up all system & user apps successfully. Now I just need to know, definitively, how to install a Rom Manager compatible recovery image for my phone, which is a lot lot harder it seems . If you or anyone could point me in the right direction I'd be very grateful :fingers-crossed:
So, I managed to install CWM and I carried out (what I thought was) a back up. I then followed a couple of videos on YouTube on how to install a custom rom, I found this...(sorry I can't post links yet as I'm a newbie) I9505_-_Official_Google_Edition_4.4.2_by_Jamal2367_Final-R1.2 and upon trying to install it I am now stuck in recovery. I've read so damn much about all this in the last few days my brain is fried and I don't know where the hell to go next. I'll attach of a few pics I've taken of the screen in the hope that helps to identify what ****-up I've made. I pray someone can help me with this please :fingers-crossed:
managed to sort it myself with a lot of pain. there was me thinking these forums would help. Yeah. Cya

[GUIDE] [OFFICIAL ROM] [GT-N5100] 4.4.2 Kitkat Update!

Hello everyone, Im new here and this is my first thread. Please forgive me if I make mistakes. And sorry, I got no screenshots.
Did you ever wish you had Android KitKat on your GT-N5100? Well wish no more! The Official Update has already been released to Korea and Poland! It shouldn't take long for it to reach to other countries.
But if you are impatient, you can flash it now via Odin! ☺
Notes:
Make sure you have at least 80%
Make sure you have a back up
Make sure you remove ALL signs of root (e.g. Xposed,Busybox etc.)
Make sure all the apps in your External SD is moved to your Internal Storage. (To avoid force closing problems)
Make sure you have USB Debugging Enabled in Settings>Developer Options>USB Debugging
BEFORE THE PROCEDURE MAKE SURE YOU MAKE A BACK UP BECAUSE THIS CAN SOFT BRICK YOUR DEVICE.I AM NOT RESPONSIBLE FOR ANYTHING YOU DO WITH YOUR PHONE/TABLET/PHABLET
LETS BEGIN!!!
Download the Firmware from the Post below
After that unzip it and you will see 2 files, just put your attention to the tar.md5 files
Install Odin3 (Links below)
Now you need to install Samsung Kies. (Link also Below)
After installing kies go to the Odin3 Folder, Right click on it and hit "Run as Administrator"
Now that your done with the PC's Part. Put your attention on your tablet and shutdown/Power Off
After that press Volume Down and Home for a few seconds until you get into a screen with a Warning, just press Volume Up to continue.
And after that connect your phone to your PC via USB and Odin should automatically detect it.
An ID:COM[Number] will show in a box on the upper right and then click on PDA and go to the directory of where you put the unziped firmware folder you downloaded from SamMobile. Select the tar.md5 file.
After that make sure you dont have re-partition checked. Double check if you need to and hit "START"
PLEASE DONT REMOVE YOUR PHONE UNTIL YOU SEE A "PASS" MESSAGE IN THE BOX.
After that it should reboot and you now have Android 4.4.2 Kitkat on your GT-N5100!
Good Luck!
Incase you get in a Boot Loop
Press Volume Up and Power button to get into Recovery and perform a Factory Reset (Data wipe) then Wipe Cache Partition and Reboot.
Enjoy!
Source: International Business Times
Hit that thanks button if this helped!
LINKS ADDED! YEY!
ROOTING GUIDE COMING SOON
TROUBLESHOOTING
If your PC doesnt recognize your device, try reinstalling drivers, and if you are stuck on Download Mode just press and hold the Power Button until it shuts down then press and hold it again to turn your device on!
Tested on a Note 8! Didnt brick the device and is working, just make a backup incase you screw up.
Wanna see the changes? Go here
LINKS!
LINKS
Firmware
Kies (After updating make sure you use Kies3)
Odin3
Don't want to download Kies? Download these USB Drivers instead.
Enjoy!
ROOTING GUIDE IS NOW HERE
Click here to root you Samsung Galaxy Note 8!
John Shenon Uy said:
ROOTING GUIDE IS NOW HERE
Click here to root you Samsung Galaxy Note 8!
Click to expand...
Click to collapse
Quick and noob question.
I have Note N5100 stock, it is still on 4.1.2 firmware, now i want to flash with odin official 4.4.2 kitkat on it. (from above post)
So question is, do i need to root it first so i can flash 4.4.2?
Thank you.
CowboyWorld said:
Quick and noob question.
I have Note N5100 stock, it is still on 4.1.2 firmware, now i want to flash with odin official 4.4.2 kitkat on it. (from above post)
So question is, do i need to root it first so i can flash 4.4.2?
Thank you.
Click to expand...
Click to collapse
I would not flash official 4.4.2 kitkat with odin, over kies or over ota. You will get kitkat bootloader with knox, no write permissions for your apps to sd card, no working rooting method which would not trigger knox and void your warranty.
The rooting method he linked does not work for Exynos 4412 devices. Read the comments to the original geohots post in s5 forum or at least the towelroot thread in this section.
Yulka said:
I would not flash official 4.4.2 kitkat with odin, over kies or over ota. You will get kitkat bootloader with knox, no write permissions for your apps to sd card, no working rooting method which would not trigger knox and void your warranty.
The rooting method he linked does not work for Exynos 4412 devices. Read the comments to the original geohots post in s5 forum or at least the towelroot thread in this section.
Click to expand...
Click to collapse
Yeah it doesn't work, use CF-Auto-Root. Works perfectly,but you will see SuperSU Force closing or in some cases, it is not installed to fix this, install/update SuperSU
If and onlyif it doesn't work, try again.
John Shenon Uy said:
Yeah it doesn't work, use CF-Auto-Root. Works perfectly,but you will see SuperSU Force closing or in some cases, it is not installed to fix this, install/update SuperSU
If and onlyif it doesn't work, try again.
Click to expand...
Click to collapse
I have done update to 4.4.2 with odin and with out root.
And there is no waranty woid or knox trigger.
So everything was OK. But i have downloaded Poland version of 4.4.2 N5100XXDND8 from samsung updates page.
thank U
Sorry for the newbie question but how can I efficiently and completely backup my device? Any apps/software I can use? I know that I can just make a copy of all my photos, videos, etc to my laptop but how about my apps and its data? Will they be deleted after flashing this firmware?
I've got a problem here .
My simcard doesn't work .
It keep saying emergency calls only
Sent from my GT-I8262 using XDA Free mobile app
excuse me sir do you have a mirror of this firmware link like 4shared or mediafire?
would you please update download link of firmware? its expired
thanks
After I flashed my GT-N5100 with Samsung's official firmware, it keeps crashing apps everytime... Why??
PS: I can't install Ten Million (10000000) game as well somehow.
---------- Post added at 07:36 PM ---------- Previous post was at 07:32 PM ----------
imaniacsz said:
excuse me sir do you have a mirror of this firmware link like 4shared or mediafire?
Click to expand...
Click to collapse
Try the official Firmwares: http://www.sammobile.com/firmwares/database/GT-N5100/
Thanks
efs problematic after flashing firmware N5100
HI, its my first post on xda and new to this world so i will try to be reasonable here.
i followed the steps mentioned in this thread except one, i.e. i didnt make a backup. Now my n5100 wont move beyond initial samsung logo and the recovery mode says "cannot mount / efs"
i also found a thread which makes some excellent points (see below), but i would still like to know if any of you tried this and had a similar problem. if so, did you find a DIY method
http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289

[Tutorial]How To Root Galaxy Grand Duos 100℅ Safe.

How to root Galaxy Grand Duos
Introduction
Hii guys my name is Saska.I am also a owner of grand duos.Months before I posted a question that is how to root galaxy grand duos??..but I didn't get a proper answer and now I rooted my phone.So I decided to post a simple,easy,100℅ working no data loss method. Sorry for my bad English and presentation because this is my first tutorial.
Things you need :​
• A PC/laptop (no need to have admin access)
• USB cable
• Galaxy Grand Duos
• Usb driver(galaxy grand duos)
• Root Genius
• Turn off your antivirus otherwise it will damage root process
• Patience
What to do before we start:
• Download USB driver to your PC/laptop.If you already have it you don't need to waste time on downloading it.
• Download Root Genius.exe.
So let's start :
• Install USB drive to your PC.If you already installed then go to next step.
•In your phone go to Setting > about phone and tap on Build number 7 times now Developer option will become visible.
•In phone go to setting > Developer option> tick USB debugging.
Note: Now your phone section has been completed.Go to PC.
• Open root genius no need to install so no admin access is needed.
•Connect you Galaxy Grand duos to your PC after root genius is launched.
• Root Genius will detect your device automatically if it connected properly.
• In order to start rooting process you need to click on "Root it" button [green button on bottam right]
•So root genius will start to root your Galaxy Grand Dous automatically. Sit there patiently and it will take 1-2 mins [depending on your PC] to root.
•When that bar reach 100℅ your Galaxy Grand Duos will be rooted successfully. Now Root Genius will install KingUser to your phone.You can uninstall it if you don't need.
•Go to googleplay/anyother app store and download "root checker" to check whether your phone is rooted or not.
Downloading links :
Samsung Galaxy Grand Duos USB Driver : http://www.mediafire.com/?uw3z23dqz3y7kgn
Root Genius.exe : https://www.dropbox.com/s/omrjip57skzh3g7/RootGenius.exe
Some Common Doubts:
Q.Do I loss my data if I use this method?
No absolutely no.You won't loss any data or apps.
Q.Do I loss my phone warranty?
Yes you will loss.But you can get it back by unrooting your phone back to normal stage.You can unroot also by using this application.
Q.Why that bar didn't reaching 100℅?
May be your device is disconnected,Usb cable is loss or your PC port is damaged.
Q.Does this method destroy my phone?
No it won't if you do the steps correctly.
Q.Why I want to root?
If you are reading this post then I won't need to answer this question.
Q.If I get disconnected while rooting can I do it again?
Yes you can.
Thankz to :
XDA
SJROOT
Uploaders of : USB driver and Root Genius
Readers.
Note : You are rooting on your own risk but you can ask any doubt related to rooting here.
Thankz alot....I rooted my phone...
princesaska said:
How to root Galaxy Grand Duos
Introduction
Hii guys my name is Saska.I am also a owner of grand duos.Months before I posted a question that is how to root galaxy grand duos??..but I didn't get a proper answer and now I rooted my phone.So I decided to post a simple,easy,100℅ working no data loss method. Sorry for my bad English and presentation because this is my first tutorial.
Things you need :​
• A PC/laptop (no need to have admin access)
• USB cable
• Galaxy Grand Duos
• Usb driver(galaxy grand duos)
• Root Genius
• Turn off your antivirus otherwise it will damage root process
• Patience
What to do before we start:
• Download USB driver to your PC/laptop.If you already have it you don't need to waste time on downloading it.
• Download Root Genius.exe.
So let's start :
• Install USB drive to your PC.If you already installed then go to next step.
•In your phone go to Setting > about phone and tap on Build number 7 times now Developer option will become visible.
•In phone go to setting > Developer option> tick USB debugging.
Note: Now your phone section has been completed.Go to PC.
• Open root genius no need to install so no admin access is needed.
•Connect you Galaxy Grand duos to your PC after root genius is launched.
• Root Genius will detect your device automatically if it connected properly.
• In order to start rooting process you need to click on "Root it" button [green button on bottam right]
•So root genius will start to root your Galaxy Grand Dous automatically. Sit there patiently and it will take 1-2 mins [depending on your PC] to root.
•When that bar reach 100℅ your Galaxy Grand Duos will be rooted successfully. Now Root Genius will install KingUser to your phone.You can uninstall it if you don't need.
•Go to googleplay/anyother app store and download "root checker" to check whether your phone is rooted or not.
Downloading links :
Samsung Galaxy Grand Duos USB Driver : http://www.mediafire.com/?uw3z23dqz3y7kgn
Root Genius.exe : https://www.dropbox.com/s/omrjip57skzh3g7/RootGenius.exe
Some Common Doubts:
Q.Do I loss my data if I use this method?
No absolutely no.You won't loss any data or apps.
Q.Do I loss my phone warranty?
Yes you will loss.But you can get it back by unrooting your phone back to normal stage.You can unroot also by using this application.
Q.Why that bar didn't reaching 100℅?
May be your device is disconnected,Usb cable is loss or your PC port is damaged.
Q.Does this method destroy my phone?
No it won't if you do the steps correctly.
Q.Why I want to root?
If you are reading this post then I won't need to answer this question.
Q.If I get disconnected while rooting can I do it again?
Yes you can.
Thankz to :
XDA
SJROOT
Uploaders of : USB driver and Root Genius
Readers.
Note : You are rooting on your own risk but you can ask any doubt related to rooting here.
Click to expand...
Click to collapse
Best Noob friendly method...
You are always welcome
Sent from my GT-I9082 using XDA Premium 4 mobile app
If my device is connected to pc is it power on or not
yes ur phone needed to be poweron and usb debug enabled
venky619 said:
If my device is connected to pc is it power on or not
Click to expand...
Click to collapse
Your phone must need to be switch on..any prb.
I tried this method and it says "Such a tough phone! Root... failed"
i get frnd wht u said
Aniruddha10 said:
I tried this method and it says "Such a tough phone! Root... failed"
Click to expand...
Click to collapse
One of my frnd tried and shown same msg but after he try twice he become successful in rooting.
Just ensure that USB is connected properly or antivirus is off..maybe it will affect rooting.
GOOd tutorials
looking more good tutorials in future keep up the work
thankz bro
deepak purohit said:
GOOd tutorials
looking more good tutorials in future keep up the work
Click to expand...
Click to collapse
Sure bRo
Nice thread
rep given ++
thankz
jinusagar said:
rep given ++
Click to expand...
Click to collapse
Thankz dude...read this post dude for more info : http://forum.xda-developers.com/general/general/beginners-basic-rooting-t2930864
couldn't root my Samsung Galaxy grand duos
i tried thrice but all i found is that when the process is on 20% the phone restarts itself nd on 25% its saying "device disconnected please connect and retry" nd then returning to the opening window on the pc. pls help!!
Sarthak Bokshi said:
i tried thrice but all i found is that when the process is on 20% the phone restarts itself nd on 25% its saying "device disconnected please connect and retry" nd then returning to the opening window on the pc. pls help!!
Click to expand...
Click to collapse
Same problem here, please help
hishamzx said:
Same problem here, please help
Click to expand...
Click to collapse
Sarthak Bokshi said:
i tried thrice but all i found is that when the process is on 20% the phone restarts itself nd on 25% its saying "device disconnected please connect and retry" nd then returning to the opening window on the pc. pls help!!
Click to expand...
Click to collapse
Guys, if you have any custom recovery, and this method is not working, fret not.
Download the supersu zip :http://download.chainfire.eu/396/SuperSU/
And flash it. I understand this is not noob friendly, but installing a custom recovery has major advantages! Like you can install new ROMs ,and other stuff!

Unlock/Root/Flash for ELEPHONE P9000 step by step for beginners

Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?

[GUIDE] Download and install MM on SM-T715

Hi guys, i'm here to share with you the Android Marshmallow 6.0.1 firmware for the SM-T715 (wifi and LTE version). It's an italian version of the firmware but it should work with other regions too. Here's the link for the download:
Link: http://www.sammobile.com/firmwares/download/70887/T715XXU2BPD6_T715OXA2BPD6_ITV/
Courtesy of Sammobile.
And here's a guide (written by miguimercadob, all credits goes to him) that you can follow also for our tablet.
1->Turn off your tab and boot it into the Download Mode. To do this, turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds. When you see the warning screen with a yellow triangle sign, press the Volume Up/Down key to enter Download/Odin mode.
2->Download the required Odin.zip file and extract the file on your PC. You will get the Odin3_v3.10.7.exe file. Open it as the administrator to get to the Odin window.
3->Connect your Galaxy device to the computer using the USB cable.
4->When you connect the device, the ID: COM port on Odin will turn Blue. You’ll also see“Added!!” message to indicate successful connection. If Odin des not detect your tab, try to reinstall drivers, try another usb cable and another usb port.
5-> Check "AP" box and click on AP. A window will pop up, just go to the folder where you extracted the firmware and select T715XXU2BPD6_T715OXA2BPD6_ITV.tar.md5 file (name may vary according to device model)
6->Now Odin is checking MD5 and will freeze for a minute or so, but don't worry, just let Odin work.
7->Click on the "Options" section and make sure that only the Auto Reboot and F. Reset Time boxes are checked. (Do not, in any case, check Re-Partition box).
8->Now, click the Start button on Odin to begin firmware installation.
10->Once you get a PASS! message on Odin, your device will restart. It’s the green signal that indicates a successful installation.
11->Once our device restarts, you can disconect it.
12-> Enjoy Marshmallow on our Tab s2 (First boot will last for some minutes, just be patient! )
That's all! Hope that everyone can update
**HOW TO ROOT**
If you want to root your device, you can just follow this great GUIDE by miguimercadob
http://forum.xda-developers.com/tab-s2/general/sm-t710-6-0-1-t710xxu2cpd9-marshmallow-t3371545
Waiting root...
sarjarim said:
Waiting root...
Click to expand...
Click to collapse
I'n waiting for root too,,,but i only wanted to give an hand to other people who maybe don't care about it.
Hi! Would it work in T715y?
is 5g wifi working for anyone in North America? someone another thread had issues with UK MM update....
Root works with no issues. Just regular odin twrp and flash supersu.
Need to find how to enable theme engine/store and mm will be perfect
Jockard said:
Hi! Would it work in T715y?
Click to expand...
Click to collapse
I already tried flashing it but I keep on getting a fail in Odin
Sent from my SM-G935F using Tapatalk
jarayn said:
Root works with no issues. Just regular odin twrp and flash supersu.
Need to find how to enable theme engine/store and mm will be perfect
Click to expand...
Click to collapse
Which version do you install?
Link please.
Edgrr000 said:
I already tried flashing it but I keep on getting a fail in Odin
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I tried, and I get a fail too...
not work on T715Y
Jockard said:
I tried, and I get a fail too...
Click to expand...
Click to collapse
hehe....
it should at least work on the T715,
for us with the T715Y, we might still need to flash the MM bootloader and modem.
i'll try is anyways
Edgrr000 said:
hehe....
it should at least work on the T715,
for us with the T715Y, we might still need to flash the MM bootloader and modem.
i'll try is anyways
Click to expand...
Click to collapse
Alright so I'm stuck in a bootloop, I don't know how safe is to flash the T715 bootloader on the T715Y
Both tablet are the exact same....
Sent from my SM-G935F using Tapatalk
Can anyone provide a fast dl link. I'm dying to get the 715 FW downloaded.
finally got it to work:
Fast DL for SM-T715 6.0.1 FW from Samsung:
https://drive.google.com/open?id=0B84P5LHZlPQMWG1sNkxHSC1vWWc
Sent from my SM-T715 using Tapatalk
EBI_LANCER said:
not work on T715Y
Click to expand...
Click to collapse
Hi, this version is ONLY for SM-T715. On other variants, such as "SM-T715Y", "SM-T715C" or "SM-T715N0" will not work.
sarjarim said:
Which version do you install?
Link please.
Click to expand...
Click to collapse
Go to my post and you will find a link to downlad supersu as well as download instructions :POST
---------- Post added at 06:06 PM ---------- Previous post was at 06:02 PM ----------
Hi, Giuskiller, thanks for giving credits to me. Just one thing to say, people is asking for root, so it would be a good idea to add a link to my post so people can follow twrp and root instructions.
Ok to i stall this on uk 715?
Try flashing this CF autoroot via odin. Got mine here: https://autoroot.chainfire.eu/ with MD5 67eb614992217b1e188689ce116f2fb1
MM for SM T715 updates?
I currently have ee uk Android 5. So far only wifi tabs are officially rolling out MM. If I install this Italian version, and switch the language will I get any updates?
Giuskiller said:
Hi guys, i'm here to share with you the Android Marshmallow 6.0.1 firmware for the SM-T715 (wifi and LTE version). It's an italian version of the firmware but it should work with other regions too. Here's the link for the download:
Link: http://www.sammobile.com/firmwares/download/70887/T715XXU2BPD6_T715OXA2BPD6_ITV/
Courtesy of Sammobile.
And here's a guide (written by miguimercadob, all credits goes to him) that you can follow also for our tablet.
1->Turn off your tab and boot it into the Download Mode. To do this, turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds. When you see the warning screen with a yellow triangle sign, press the Volume Up/Down key to enter Download/Odin mode.
2->Download the required Odin.zip file and extract the file on your PC. You will get the Odin3_v3.10.7.exe file. Open it as the administrator to get to the Odin window.
3->Connect your Galaxy device to the computer using the USB cable.
4->When you connect the device, the ID: COM port on Odin will turn Blue. You’ll also see“Added!!” message to indicate successful connection. If Odin des not detect your tab, try to reinstall drivers, try another usb cable and another usb port.
5-> Check "AP" box and click on AP. A window will pop up, just go to the folder where you extracted the firmware and select T715XXU2BPD6_T715OXA2BPD6_ITV.tar.md5 file (name may vary according to device model)
6->Now Odin is checking MD5 and will freeze for a minute or so, but don't worry, just let Odin work.
7->Click on the "Options" section and make sure that only the Auto Reboot and F. Reset Time boxes are checked. (Do not, in any case, check Re-Partition box).
8->Now, click the Start button on Odin to begin firmware installation.
10->Once you get a PASS! message on Odin, your device will restart. It’s the green signal that indicates a successful installation.
11->Once our device restarts, you can disconect it.
12-> Enjoy Marshmallow on our Tab s2 (First boot will last for some minutes, just be patient! )
That's all! Hope that everyone can update
**HOW TO ROOT**
If you want to root your device, you can just follow this great GUIDE by miguimercadob
http://forum.xda-developers.com/tab-s2/general/sm-t710-6-0-1-t710xxu2cpd9-marshmallow-t3371545
Click to expand...
Click to collapse
does this effect your warranty or trip knox?
also is this suitable for LTE version?
riz157 said:
does this effect your warranty or trip knox?
also is this suitable for LTE version?
Click to expand...
Click to collapse
No this wont trip knox as you're just updating (at least my one is safe). And yes, my t-715 is LTE version, so no problems at all.

Categories

Resources