Related
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
linuxhost said:
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
Click to expand...
Click to collapse
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
adokitkat said:
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
Click to expand...
Click to collapse
Thank you for your reply, adokitkat.
adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Yes pls
appollokillers1 said:
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Click to expand...
Click to collapse
That will be great thanks.
adokitkat said:
That will be great thanks.
Click to expand...
Click to collapse
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
appollokillers1 said:
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
Click to expand...
Click to collapse
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
adokitkat said:
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
Click to expand...
Click to collapse
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
appollokillers1 said:
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
Click to expand...
Click to collapse
It was ok for them, i dont know why not for me .. At least it worked one time.. And i never heard of it, i was trying to use all common root programs and nothing .. I will check it out, thanks
TWRP link is down, mind passing on a new one
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Thanks for that muchly dude, hadn't checked that for a while.
Update seems to be stability improvements, power efficiency improvements and some yotamirror and panel improvements and features.
Its not 5.1, but it's an update, I'll take it.
And yeah, super glad moved to the RU ROM. Backing up now, will OTA flash update once that's done. SuperSU has been flashable everytime after an update so far so fingers crossed.
All up and running .
I was rooted, running RU 1.87 with TWRP - phone handled it all just fine - downloaded OTA, pressed install - it went to TWRP > flashed stock recovery back over itself > rebooted and installed.
Phone booted up, all working fine. Lost root - simple reboot and flash the SU.zip had sitting there from the last update. Cache and Dalvik wiped for good measure.
Reboot and all is well and back to normal but with a few improvements, lovely.
About as easy as it's even been done really.
Hope everyone else gets to enjoy the update through similarly smooth procedures .
Yeah, I ended up doing a fresh installation plus rooting, everything smooth. I'm never too sure what an update leaves behind.
It's really a great device, hopefully they'll keep updating things for a while. Of course version 6.0 would be welcomed... Apparently, by the numbering they use, next step would be either 1.2.xx with Android 5.1 or 2.x.xx with 6.0. Let's see.
Fair play, I toyed with idea of it, but was fresh from last install and honestly don't have the time to set everything up again.
My hope is they take all their good ideas from this and can at least join someone else in making a great device.
Saw a working bendy phone the other day, lets you turn pages on reading app by bending corner as you would a book etc. I thought if that could be combined with yota tech, then you have damn near the perfect tablet.
Honestly I don't think we'll get 5.1, let alone 6.0. They're refining their ideas in prep for Yotaphone 3, that and the possible tablet are their main focus right now.
Interestingly, the update flashed it's stock recovery over twrp - someone prepared for the possibility of root owners this time around. So they are still paying attention .
So any idea what's the difference between the EU and the RU rom? I mean there has to be some reason they are two separate roms.
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Jeopardy said:
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Click to expand...
Click to collapse
FYI the difference is essentially the product package configuration (app bundles that are pre-loaded) but there are also some differences between the resources used for the stock apps. One in particular (my personal fav ) is the dialler - the RU variant includes cyrillic characters regardless of language/locale setting (feature). The EU will give you a regular english-only dialler if you're using english locale settings
Vuche said:
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Click to expand...
Click to collapse
Ho to flash the update zip file? I m stuck on 4.4.3...
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Does the new update solve the keyboard sensitivity issue??
zute333 said:
numerous guides and how to's in this forum and across XDA, as well as google.
download fastboot + adb > boot to download mode > flash twrp via fastboot commands > boot into twrp > flash zip.
There's obviously more to it than that, up to you to do the research.
Click to expand...
Click to collapse
i'm using this post as a minimalistic guide for myself (so i keep it up with my "discoveries" )
and ofc for been helped by everyone who wants to help me because i am completely new to android world cause this is my first android phone ever!
so.. let's get started!
i downloaded [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
version 1.4.3 doesnt works for me so i downloaded the 1.3 as suggested and worked.
then i enabled the download mode following the procedure:
Turn off the phone, then press and hold the volume down key + the power key at the same time. This should boot you into download mode.
Click to expand...
Click to collapse
note: phone MUST be disconnected form pc to be turned off.
now..
*does install twrp invalidate warranty?
EDIT: answer is YES cause of
TWRP 2.8.5.0 YotaPhone 2 recovery image said:
Warning: It is currently not known how to re-lock the bootloader. This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem
Click to expand...
Click to collapse
*is installing TWRP a mandatory step?
EDIT: the answer is NO. it seems that the mandatory part is to unlock the bootloader (the bad part for the warranty.. and that can erase ur data..) and this can be done following this guide How to Install TWRP Recovery on YotaPhone 2 untill point 6 included - which i am reporting here for easy of use.
How to Install TWRP Recovery on YotaPhone 2 said:
How to Flash TWRP Recovery on YotaPhone 2
1 - Setup ADB and Fastboot on your Windows PC.
2 - Enable USB debugging from developer options on your YotaPhone 2.
3 - Connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
4 - Go to the folder where you downloaded the TWRP recovery image from the download link above on your PC and open a command window inside that folder by doing “Shift + Right click” on any empty white space inside the folder, then select “Open command window here”.
5 - (Skip this if your bootloader is already unlocked) Now to unlock the bootloader, type in the following command:
└ Beware that unlocking the bootloader may wipe your phone’s data. Make sure to backup first before proceeding.
adb reboot bootloader
Click to expand...
Click to collapse
└ This will reboot your phone to bootloader mode
fastboot oem unlock
Click to expand...
Click to collapse
└ This will unlock bootloader on your device.
6 - Now if your phone has rebooted and is no longer in the bootloader mode, then boot it back into bootloader mode with the “adb reboot bootloader” command.
Click to expand...
Click to collapse
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
error: cannot open 'firmware/emnc_appsboot.mbn'
error: cannot open 'firmware/boot.img'
error: cannot open 'firmware/system.img'
error: cannot open 'firmware/recovery.img'
error: cannot open 'firmware/cache.img'
error: cannot open 'firmware/radio/NON-HLOS.bin'
error: cannot open 'firmware/radio/sbli.mbn'
error: cannot open 'firmware/radio/rpm.mbn'
error: cannot open 'firmware/radio/tz.mbn'
error: cannot open 'firmware/enmc_appsboots.mbn'
Would you like to flash userdata[Y/N]:
Click to expand...
Click to collapse
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Hello guys, I downloaded Lollipop from the ftp but installation fails: no MD5 file found!
I downloaded all russian versions and also the 1.6 EU version... but no way I always get this error.
I'm using TWRP 2.8.5, I guess the last one, and in the tutorials I see this version...
Does anyone know how to solve? :crying:
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
The info is described in various posts across the yotaphone forum. Are you rooted? If not then there also many many guides across the internet for that.
Not walking you through the whole process, sorry. We all had to learn, once you do it's all much easier.
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status
in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Melting Blaze said:
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Click to expand...
Click to collapse
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
TKPL said:
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
Click to expand...
Click to collapse
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
JAMMANDROID said:
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Click to expand...
Click to collapse
yeah. is exactly what i did, but super panicing like a chicken without head
Melting Blaze said:
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
yeah. is exactly what i did, but super panicing like a chicken without head
Click to expand...
Click to collapse
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
Hi, download YotaFlasher, it permits you to download and flash firmwares in an easy way, and you don't need to know any shell command
---------- Post added at 09:37 AM ---------- Previous post was at 09:25 AM ----------
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
TKPL said:
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
Click to expand...
Click to collapse
Hello! I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB :laugh:
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
Click to expand...
Click to collapse
seems that is the same for a lot of people if not everyone..
cause of this problem i am using this app gravity screen on/off.
it halves the problem cause now i have no problem for the amoled. and for problem i mean use the pwer button instead of simply swipe.
for the e-ink panel i still have to use the power button, only way it works.
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this:
Download a flashable custom rom, put the rom *.zip file in the same folder with ADB.
Go into recovery TWRP, connect your phone to your computer.
Push rom *.zip file to your phone's internal storage with this command in ADB:
push [file.zip] /sdcard/.
Then flash that rom file with TWRP.
Well, sir, how can I get into TWRP? I can't even droidboot... My recovery that I flashed was stock
deleted.
kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
tank4k said:
can u open droid boot?
Click to expand...
Click to collapse
No
paktepu said:
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
Click to expand...
Click to collapse
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
kelvinvalencio said:
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
Click to expand...
Click to collapse
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
kelvinvalencio said:
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
Click to expand...
Click to collapse
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I followed the Debrick one. The problem comes when I ran Debrick.dat, from the Cloverview mode (Press vol down and connect to pc). While the Debrick program runs, the phone "boots". Shows up USB logo and it goes red. Few seconds after then, the program closes, leaves the phone on red USB logo. Is this something normal?
Btw that link can't help.
Sent from my EG680 using XDA-Developers mobile app
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
---------- Post added at 09:07 PM ---------- Previous post was at 09:03 PM ----------
DogeLordTR said:
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
Click to expand...
Click to collapse
OK, I'm really stupid, sorry for time waste.
paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I have contacted Shakalaca and until today I have not retrieved any reply. This problem haven't been solved. Any idea? I see you know a lot about this, and you're very popular arround here.
This happened with my Asus Zenfone 5 (T00j). Tried every solution available on net without sucess, finally took it to Service Center and they had to replace the motherboard
Hello all,
I needed to root my phone (P8) in order to install some applications for file recovery. I did the following:
1) I unlocked bootloader (by obtaining the key on huawei pages, going to Settings, Developer options, USB debugging, HiSuite installed to get drivers, ADB Fastboot v.1.4 installed, volume- and power on. I got to the fastboot&rescue screen where after using the command in ADB Fastboot I gained "Phone unlocked" message)
2) I installed the TWRP in the phone (thru the Spanish console)
3) I copied UPDATE-SuperSU-v2.79.zip to internal memory
4) Volume+- Power on and got to the TWRP console where I chose install the UPDATE-SuperSU-v2.79.zip
5) everything looked fine, so I rebooted. Now I have looping logo and I am unable to unbrick the phone.
Any help please?
Thank you
Are you able to start your phone into TWRP?
Sometimes it is a little bit tricky! (hold Volumen-Up + Power, if the phone vibrates release the power button, keep holding the Volumen up button and release it if the Huawei logo disappears)
I have the same problem, and I can't get into TWRP
Paloik said:
Are you able to start your phone into TWRP?
Sometimes it is a little bit tricky! (hold Volumen-Up + Power, if the phone vibrates release the power button, keep holding the Volumen up button and release it if the Huawei logo disappears)
Click to expand...
Click to collapse
Hello,
Thanks for your answer. Yes, I am able to get to TWRP
Ok, what build version is on your P8 ?
Also what TWRP version did you flash ?
These answers are important.
Ps:-
If using B398 you MUST use the latest versions of TWRP and SU.
Just follow the instructions in post #1,
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
TO THE LETTER, using these linked to files (TWRP and SuperSU) and, hey presto, a fully rooted P8.
https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Sparkrite said:
Ok, what build version is on your P8 ?
Also what TWRP version did you flash ?
These answers are important.
Ps:-
If using B398 you MUST use the latest versions of TWRP and SU.
Just follow the instructions in post #1,
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
TO THE LETTER, using these linked to files (TWRP and SuperSU) and, hey presto, a fully rooted P8.
https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Click to expand...
Click to collapse
Hello Sparkrite,
the version I guess (I am not 100 % sure but I remember that I upgraded over the air about two months ago) is B397 and I installed TWRP version 3.0.2-0
Before I progress any further, tell me if the combination is wrong or I can follow the link you posted.
Thank you
You have absolutely nothing to lose by downloading and flashing the versions I have linked to.
Do so and let me know how you get on.
Sparkrite said:
You have absolutely nothing to lose by downloading and flashing the versions I have linked to.
Do so and let me know how you get on.
Click to expand...
Click to collapse
Hello,
I followed the points in the abovementioned post;
a) I was able to see phone unlocked,
b) I installed newer TWRP version (3.1.1.0)
c) I chose the "B" option for rooting and flashed kernel for root (version which is mentioned in the post) and
d) I flashed the SuperSU downloaded from your post
e) I rebooted and ended up with the following error message
Error!
error func No : 10 (boot image)
error No : 2 (load failded!)
I tried the steps c and d but still the same result.
Can you please give me further help?
Thank you
nameh said:
Hello,
I followed the points in the abovementioned post;
a) I was able to see phone unlocked,
b) I installed newer TWRP version (3.1.1.0)
c) I chose the "B" option for rooting and flashed kernel for root (version which is mentioned in the post) and
d) I flashed the SuperSU downloaded from your post
e) I rebooted and ended up with the following error message
Error!
error func No : 10 (boot image)
error No : 2 (load failded!)
I tried the steps c and d but still the same result.
Can you please give me further help?
Thank you
Click to expand...
Click to collapse
Start again and use option "A", Rooting in systemless Mode (by maintaining the original Stock-Kernel.
Thais is the method I used on B398.
Less chance of anything going wrong............
BTW, I can't see an option "D".
Sparkrite said:
Start again and use option "A", Rooting in systemless Mode (by maintaining the original Stock-Kernel.
Thais is the method I used on B398.
Less chance of anything going wrong............
BTW, I can't see an option "D".
Click to expand...
Click to collapse
I tried with the A option and still the same message
Rescue mode
Attention!
Please update system again
...
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed)
The c and d I mentioned in my previous post was related to the step-list (what I did)
nameh said:
I tried with the A option and still the same message
Rescue mode
Attention!
Please update system again
...
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed)
The c and d I mentioned in my previous post was related to the step-list (what I did)
Click to expand...
Click to collapse
Not to worry, have you done a stock update to B398 ?
And if so does the phone boot up correctly ?
This is what I meant by "Start again".
Sparkrite said:
Not to worry, have you done a stock update to B398 ?
And if so does the phone boot up correctly ?
This is what I meant by "Start again".
Click to expand...
Click to collapse
No, I just flashed the SU and twrp. Can you give me a hint where to search for the European version. All I found was a newer version than B398 or other regions.
Thank you
nameh said:
No, I just flashed the SU and twrp. Can you give me a hint where to search for the European version. All I found was a newer version than B398 or other regions.
Thank you
Click to expand...
Click to collapse
Well that explains why you are getting the same error.
First page that came up on Google search :-
http://www.stechguide.com/huawei-p8-b398-marshmallow-update/
Please follow the instructions EXACTLY.
Sparkrite said:
Well that explains why you are getting the same error.
First page that came up on Google search :-
http://www.stechguide.com/huawei-p8-b398-marshmallow-update/
Please follow the instructions EXACTLY.
Click to expand...
Click to collapse
You are the HERO! I am in! Although still the phone is not rooted at least it is working (which means "great to see it up and running again") :victory: :highfive:
I do not know why but Google never showed me the page you posted in its search results (maybe it is the new way of "personalizing" results) or any similar. It was always something from other regions or something which was full of ads and not really trustful.
Thank you again!!!
nameh said:
You are the HERO! I am in! Although still the phone is not rooted at least it is working (which means "great to see it up and running again") :victory: :highfive:
I do not know why but Google never showed me the page you posted in its search results (maybe it is the new way of "personalizing" results) or any similar. It was always something from other regions or something which was full of ads and not really trustful.
Thank you again!!!
Click to expand...
Click to collapse
Excellent !!
Its always good to "resurrect" a bricked phone.
Now, if you use the TWRP and SU I previously linked to and Method A you WILL have a working and most importantly a ROOTED phone.
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
Cheers.
Sparkrite said:
Excellent !!
Its always good to "resurrect" a bricked phone.
Now, if you use the TWRP and SU I previously linked to and Method A you WILL have a working and most importantly a ROOTED phone.
https://forum.xda-developers.com/huawei-p8/how-to/rooting-huawei-p8-marshmallow-emui4-0-1-t3431249
Cheers.
Click to expand...
Click to collapse
Thank you a lot... I mean A LOT!!! It works! I have literally no words. Thank you again
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
fr4nk32 said:
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
Click to expand...
Click to collapse
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Dadditz said:
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Click to expand...
Click to collapse
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
fr4nk32 said:
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
Click to expand...
Click to collapse
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery
(name.of.recovery).img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Dadditz said:
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery.img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Click to expand...
Click to collapse
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
fr4nk32 said:
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
Click to expand...
Click to collapse
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Dadditz said:
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Click to expand...
Click to collapse
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
fr4nk32 said:
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
Click to expand...
Click to collapse
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Dadditz said:
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Click to expand...
Click to collapse
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
fr4nk32 said:
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
Click to expand...
Click to collapse
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Dadditz said:
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Click to expand...
Click to collapse
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
fr4nk32 said:
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
Click to expand...
Click to collapse
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Dadditz said:
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Click to expand...
Click to collapse
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
fr4nk32 said:
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
Click to expand...
Click to collapse
Ok i'm glad to see that worked..
I wish to thank in a special way Firmware Finder TEAM that with their
programs gave us the chance to solve many problems, THX guys. :good:
See you