Database Users

[Q] Note 3 doesn't start anymore

Dear all,
I have only recently lost my IMEI und tried everything to recover it. As a matter of fact I had made a backup before and tried to restore it and it didn't work. Today, I tried doing that another time and after that I wanted to reboot my phone but after it shut down it just doesn't boot up anymore. It shows nothing, only the black screen. It seems like it doesn't react to anything, I also tried to pull the battery but that also wasn't successful. I also can't get into Download Mode.
Any ideas what I could do?

Charge the battery or try another battery first .

I did both, I charged the battery but it didn't help and I also tried another (fully charged) battery, without success.

try to connect with kies 3

Kies doesn't recognize my phone.

Service centre repair your next step .

I'll let my carrier send it to Samsung and tell them that it crashed after trying to update to Lollipop via Kies, I read that this worked in some cases. If it doesn't I'll have to have it repaired.
What do you guys think about those "USB jigs"? Do you think those could help me with my problem?

YAAAAY!
Thanks to this thread http://forum.xda-developers.com/showthread.php?t=2625332 I was able to unbrick my device and by flashing a new PIT-File and a Stock ROM even my IMEI came back. I think my partition was somehow messed up because after flashing the PIT-File it began to work properly, but I flashed the Stock ROM to have a "clean" system again and installed Cyanogenmod afterwards with success.

So how does this fix work if the phone is unable to connect or power on ..
OP yes try the usb recovery jig to see if it boots to download mode .

Well, it did help. After I had put the Image on my SDcard and removed my SIM card I was able to boot my phone, this was the main issue. The rest was child's play, I flashed the PIT-file and a stock ROM and everything was working fine again.

flash new PIT file
hi you got to flash a new pit flie. maybe something damaged your phone boot. look in here
http://forum.xda-developers.com/showthread.php?t=2625332

Booting bricked N910T from SD

Hi does anyone know if there is a method to boot an apparently bricked Note 4 from the SD card? I see that this option is available for a few other Samsung phones but i cant seem to find a method for this searching the forum or google.
Background, i have a N910T that upon a reboot it would not boot up again. It just sits there with a black screen. I am not sure if something with the internal flash is corrupt. I am hoping to be able to boot to download mode from the SD card so i can attempt to fully reflash a stock rom image though odin and get this working again.
I have also tried a USB Jig that i had hoping i could kick this thing into download mode but no such luck.
Thanks!

So you can't get to download mode using the "power-home-volume down button combo?

Did you get things working?

It's almost impossible to bricked a phone now days....there are too many methods out there to recover from that. Just put the device into recovery mode and Odin the software and that should get your note 4 out of bricked!
Sent from my SM-N910T3 using Tapatalk

d0ug said:
Hi does anyone know if there is a method to boot an apparently bricked Note 4 from the SD card? I see that this option is available for a few other Samsung phones but i cant seem to find a method for this searching the forum or google.
Background, i have a N910T that upon a reboot it would not boot up again. It just sits there with a black screen. I am not sure if something with the internal flash is corrupt. I am hoping to be able to boot to download mode from the SD card so i can attempt to fully reflash a stock rom image though odin and get this working again.
I have also tried a USB Jig that i had hoping i could kick this thing into download mode but no such luck.
Thanks!
Click to expand...
Click to collapse
I actually looked for this last week for ~4 hours... and found that No, there's no way to do this when the phone is already bricked. There were some things you could do if you are able to get into the phone to prepare it for booting from an external sd card, but if you can't get in to it to prepare it, then there's no way to do it - at least I wasn't able to find one.

Why not Odin flash a stock rom? I haven't ran into a full brick actually thanks to Odin I thought it was impossible to have a bricked device
Down volume, home, power option is all you need for Odin are you saying you can't even do that?
Sent from my SM-G925T using Tapatalk

Hopefully you pulled the battery!
It pretty hard to brick the Note 4...
Soft brick yeah, I've done mine several times..
Just make sure your battery is charged and rdy!
Good luck

Bootloop, No recovery and No download Mode.

Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE

Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.

When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.

GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.

talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked

GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk

talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.

Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!

GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk

lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk

talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!

no signs of life (no charging led, nothing on screen) after OTA update

So yesterday I got a notification for an OTA update (I'm on sprint). I am rooted, have xposed, and have twrp installed. Partly because of my stupidity and also just to see what would happen, I clicked download and install now. Now the phone doesn't show any signs of life, even after taking out the battery and trying to drain the capacitors by holding down power then putting the battery back in. Doesn't show up on my computer when plugged in, and doesn't have any power led when charging. I've tried 4 batteries with it (lol I have too many) and they all don't work. They were all charged with external anker chargers. I've tried with the sim card and sd card taken out, too.
So yeah, my phone is dead and I have no idea what to do. I'm pretty sure I'm out of warranty because it's been two years and I've modified it.

fruitgang said:
So yesterday I got a notification for an OTA update (I'm on sprint). I am rooted, have xposed, and have twrp installed. Partly because of my stupidity and also just to see what would happen, I clicked download and install now. Now the phone doesn't show any signs of life, even after taking out the battery and trying to drain the capacitors by holding down power then putting the battery back in. Doesn't show up on my computer when plugged in, and doesn't have any power led when charging. I've tried 4 batteries with it (lol I have too many) and they all don't work. They were all charged with external anker chargers. I've tried with the sim card and sd card taken out, too.
So yeah, my phone is dead and I have no idea what to do. I'm pretty sure I'm out of warranty because it's been two years and I've modified it.
Click to expand...
Click to collapse
Sorry for your loss mate.. please take your device to the nearest Samsung service center and let them check it for you the won't charge you nothing for normal checkup. Merry Christmas
Sent from my SM-N910G using Tapatalk

fruitgang said:
So yesterday I got a notification for an OTA update (I'm on sprint). I am rooted, have xposed, and have twrp installed. Partly because of my stupidity and also just to see what would happen, I clicked download and install now. Now the phone doesn't show any signs of life, even after taking out the battery and trying to drain the capacitors by holding down power then putting the battery back in. Doesn't show up on my computer when plugged in, and doesn't have any power led when charging. I've tried 4 batteries with it (lol I have too many) and they all don't work. They were all charged with external anker chargers. I've tried with the sim card and sd card taken out, too.
So yeah, my phone is dead and I have no idea what to do. I'm pretty sure I'm out of warranty because it's been two years and I've modified it.
Click to expand...
Click to collapse
You might consider to have a look here if you didn't do it already mate : http://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114

If you need the debrick.img for the sprint varient, I can give you that.

I thought OTA would not install, if you were rooted and had a custom recovery.

Chimbat said:
You might consider to have a look here if you didn't do it already mate : http://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
Click to expand...
Click to collapse
Hey, thanks for the help. I'm not sure how to check if my device is hard bricked? Is it normal for there to be no signs of life at all, not even power LED or vibrations? I can't get my phone to the download mode in order to show up in odin so I'm not sure how I would flash the unbrick file. When I plug my phone into my computer windows says that the device has malfunctioned and I can't find it in the device manager.

fruitgang said:
Hey, thanks for the help. I'm not sure how to check if my device is hard bricked? Is it normal for there to be no signs of life at all, not even power LED or vibrations? I can't get my phone to the download mode in order to show up in odin so I'm not sure how I would flash the unbrick file. When I plug my phone into my computer windows says that the device has malfunctioned and I can't find it in the device manager.
Click to expand...
Click to collapse
It's worth to try it i think. Some users got back their phones to life using this method. @RDChase is offering you a debrick.img for your variant. This method is using sdcard so no worries at the moment with Odin

Similar thing here, Sprint, TWRP, rooted, stock rom one of the early ones v4.4.4?!
Over last couple month it kept trying to update itself at night, very sneaky!!!! I have disabled auto-download and update BUT clearly it found a way around it, bastards!
It was in a reboot loop, extremely hot and buzzing, woke me up in the middle of night, I thought it going to burst in flames like Note 7!
So I pulled the battery out and left it out till morning, but now it no longer powers up, no LED, black screen, PC keeps saying USB drive malfunction and un-recognized, can't put it in recovery or download mode! Odin doesn't detect it also. PC device manager doesn't detect it either! Used volt meter to check both batteries both are fully charged up, but it doesn't show LED charging light?!?
Is there any way to un-brick it?
Again, I repeat phone does not power up and PC doesn't detect it!
Please help, if I can't un-brick it than I have few days until end of year to catch deal on upgrade to LG V20, hopefully it can be un-looked and rooted????
Edit: Just read online there is possibility that Note 8 is coming out either in April or Early August 2017!!!!!!
I need my Note 4 working again and last until new Note 8 comes out!
---------- Post added at 10:03 PM ---------- Previous post was at 09:20 PM ----------
Chimbat said:
It's worth to try it i think. Some users got back their phones to life using this method. @RDChase is offering you a debrick.img for your variant. This method is using sdcard so no worries at the moment with Odin
Click to expand...
Click to collapse
Will mounting De-Brick.img on sdcard even work if phone doesn't power on or go into download/recovery mode?

Yes. Instead of booting from internal memory, the cpu will boot from the external sdcard. Make sure you prepare it correctly however. The sdcard must be the 32GB+.
Take a look at this.
http://forum.xda-developers.com/showthread.php?t=2345860
Is is for the s3, I know... However, it's the same stuff happening.
This works on a soc level, not the bootloader level.
Link to N910P debrick.
Removed, can't get it back either
If I have helped you, hit that thanks button!

boot from internal
RDChase said:
Yes. Instead of booting from internal memory, the cpu will boot from the external sdcard. Make sure you prepare it correctly however. The sdcard must be the 32GB+.
Take a look at this.
http://forum.xda-developers.com/showthread.php?t=2345860
Is is for the s3, I know... However, it's the same stuff happening.
This works on a soc level, not the bootloader level.
Link to N910P debrick.
Mega Link
If I have helped you, hit that thanks button!
Click to expand...
Click to collapse
hi. once you get it to boot from sd card and configure the phone how do you make it so it can boot normally without the need for the sd card?

RDChase said:
Yes. Instead of booting from internal memory, the cpu will boot from the external sdcard. Make sure you prepare it correctly however. The sdcard must be the 32GB+.
Take a look at this.
http://forum.xda-developers.com/showthread.php?t=2345860
Is is for the s3, I know... However, it's the same stuff happening.
This works on a soc level, not the bootloader level.
Link to N910P debrick.
Mega Link
If I have helped you, hit that thanks button!
Click to expand...
Click to collapse
:good: Thank you for debrick.img was looking for Sprint one everywhere!
Is it supposed to be 128mb or around 4Gb?
Debrick.img doesn't includes stock Rom, does it? If it does which version?
Next Steps:
1. Copy debrick.img to sdcard?
2. Put in sdcard + battery +press VolDown+Home+Power?
3. USB connect to PC + flash new Rom using Odin?
4. Root again?
Is this correct way to do it?
Has it worked for anyone?

RDChase said:
Yes. Instead of booting from internal memory, the cpu will boot from the external sdcard. Make sure you prepare it correctly however. The sdcard must be the 32GB+.
Take a look at this.
http://forum.xda-developers.com/showthread.php?t=2345860
Is is for the s3, I know... However, it's the same stuff happening.
This works on a soc level, not the bootloader level.
Link to N910P debrick.
Mega Link
If I have helped you, hit that thanks button!
Click to expand...
Click to collapse
I'm confused, I correctly mounted the image to the sd card and I put it on the phone with a fully charged battery, and tried booting into download mode thru home + volume down + power. it doesn't show anything on screen or any LEDS. it's connected to the computer but it says "usb device malfunctioned". Thanks for your help

I can't get into download mode even with the unbrick sd card in, I mounted it with win32DiskManager and everything. No charging LED or screen or vibration at all.
I installed qualcomm drivers and it shows up as "Qualcomm HS-USB QDLoader 9008"
After some research looks like this is the only method that would solve my issue.. problem is that nobody has released the files needed to do this. http://forum.xda-developers.com/note-4/help/unbrick-samsung-galaxy-note-4-sm-n910w8-t3249970
Edit: Would a USB jig help me?

dead4ngel - to permanently fix it, just Odin the stock firmware
Others - I wasn't clear in how to prepare the SD card.
To prepare it properly you image the SD card with the debrick image file. This has to be on a 32+ GB SD card. (On a Linux machine where your in the folder with debrick-n910p.img is located and your SD card is /dev/sdx the command is dd if=debrick-n910p of=/dev/sdx)
You then put it in your phone, boot to download mode (it may take a few tries), then Odin a stock rom (PH1 or PK1 only) which MUST contain the bootloader
After this you don't need have the SD card be prepared like this, your bootloader will be fixed

RDChase said:
dead4ngel - to permanently fix it, just Odin the stock firmware
Others - I wasn't clear in how to prepare the SD card.
To prepare it properly you image the SD card with the debrick image file. This has to be on a 32+ GB SD card. (On a Linux machine where your in the folder with debrick-n910p.img is located and your SD card is /dev/sdx the command is dd if=debrick-n910p of=/dev/sdx)
You then put it in your phone, boot to download mode (it may take a few tries), then Odin a stock rom (PH1 or PK1 only) which MUST contain the bootloader
After this you don't need have the SD card be prepared like this, your bootloader will be fixed
Click to expand...
Click to collapse
:good: Again thanks a lot for debrick.img it worked, you saved my butt!
Here is what I did to make it come alive, it did take couple trial and errors on my part.
Warning DO NOT copy & paste image file directly onto sdcard, it wont work!
Instead use the diskimage win32 software that was mentioned in Debrick thread before.
I used it to unpack and write file from debrick.img onto 16GB sdcard (only one I have) using that little piece of software.
I plugged in sdcard + battery, than pressed power button and phone came back to LIVE:angel:
Now it is back in my original KitKat Rom v4.4.4 still booted from sdcard, I was able to transfer all my documents and photos to my PC, thank God!
Ps screen got very hot again while it tried to run another software update, I killed it with task manager and turned off Data+WiFi radios for now, until I re-Flash from Odin!
Now for next step to flash new ROM using Odin, do I have to flash original KitKat 4.4.4 or Lollipop 5.11 recovery or can I just flash stock Marshmallow 6.11?
Is there stock Sprint+rooted+De-Odexed Marshmallow 6.11 version I can safely flash?
Do I need to root again each new ROM?

pLz i want to update jn lollipop halp me
Sent from my Panasonic ELUGA Z using XDA Free mobile app

@RDChase One step forward two steps backward arhh!
Managed to put it into download mode + downloaded Marshmallow PK1
BUT still having issue with malfunctioning USB device "Unknown USB Device (Device Descriptor Request Failed)
I have installed Google & Samsung & Qualcomm drivers to no effect!
How do I fix it?

try differnt usb cords and/ports
unistall/reinstall samsung drivers
take a look at this

yes please !!!!
RDChase said:
If you need the debrick.img for the sprint varient, I can give you that.
Click to expand...
Click to collapse
yes please i need this file a lot pleaseeee

Tarek Hadef Mostafa said:
yes please i need this file a lot pleaseeee
Click to expand...
Click to collapse
Before you ask for things, LOOK FOR THEM! I want YOU to find the link, This should help you.

My Samsung note 4 SM-n910F wont turn on :(

Hi guys can you help me please i am facing a big problem with my Samsung note 4 SM-n910F stock Rom 6.0.1 android i slept last night and i left my phone charging normal then in the morning my phone never turns on and when I plug the usb cable on my laptop it shows a qualcomm hs-usb qdloader 9008 on device manager can you help me please it is my only phone i use i wrote many threads in different forums with no response at all ​

Very mysterious. There can be 2 reasons: 1. Your samsung device may have updated last night, this may happen even if you have turned it off. Your samsung device may have lost power during updating and failed verfication. I think so because you wrote that it shows blackscreen in but still appears in qcom port. 2. Your hardware may have been damaged, it may happen. You can first try to download your stock firmware https://www.sammobile.com/firmwares/ and odin tool, to unbrick your device. good luck.

JonasHS said:
Very mysterious. There can be 2 reasons: 1. Your samsung device may have updated last night, this may happen even if you have turned it off. Your samsung device may have lost power during updating and failed verfication. I think so because you wrote that it shows blackscreen in but still appears in qcom port. 2. Your hardware may have been damaged, it may happen. You can first try to download your stock firmware https://www.sammobile.com/firmwares/ and odin tool, to unbrick your device. good luck.
Click to expand...
Click to collapse
nope its didn't update at all no update support for my device the latest rom is already installed years ago stock rom android 6.0.1 the latest supported rom for my device when i plug it on my pc i hear usb sound normal

This is 90% of all cases software errors. You should try using odin with stock formware. If that does not work, I'm afraid there's a short circuit on the ssd drive.

JonasHS said:
This is 90% of all cases software errors. You should try using odin with stock formware. If that does not work, I'm afraid there's a short circuit on the ssd drive.
Click to expand...
Click to collapse
but i can't go put it in download mode for odin

pasted from a random site:
This is for Samsung note4 N910F:
For avoiding any more confusions , i have gathered all the links that are important .
These are the only files that you will need to debrick a n910f ,download them all and you are good to go :
This is the debrick.img :
https://mega.nz/#!PpVXga4R!AAAAAAAAA...AAAQ9oBW-CmsNk
The next is win32diskimager :
https://mega.nz/#!PtUDGArB!AAAAAAAAA...AAAOtL_pacxLGc
Qualcomm drivers: https://mega.nz/#!4lNliRYJ!3blyZgKug...2UjUIckEFhMRks
This is the recovery firmware for n910f (go to note4/511 and download each and every file ):
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
This is the procedure:
-Open win32diskimager, load the debrick.img(3.74gb for n910f
-Flash it on a blank sd card, the card should be completely formatted and should be in fat32 format.
[/B ]-Once done, put that sd card in your bricked device.
-Connect it to your pc.
-Hold the power button for at least 10 sec or try the download mode key trio.
-It should vibrate.
-If it doesnt, hold it in front of an air conditioner,
let it cool( this has been tested).
-If it still doesnt vibrates, remove the battery, hold the power button for 10sec and then insert the battery.
-Now again try to press power button.
>So, once it vibrates, leave it for around 5min.
-Then press the volume down key+power+home.
-It should boot in to download mode.
-Now you can flash stock rom or recovery firmware
recommend flashing customs roms tho stock rom sucks
if I helped, please press Like!!!

notnoelchannel said:
pasted from a random site:
This is for Samsung note4 N910F:
For avoiding any more confusions , i have gathered all the links that are important .
These are the only files that you will need to debrick a n910f ,download them all and you are good to go :
This is the debrick.img :
https://mega.nz/#!PpVXga4R!AAAAAAAAA...AAAQ9oBW-CmsNk
The next is win32diskimager :
https://mega.nz/#!PtUDGArB!AAAAAAAAA...AAAOtL_pacxLGc
Qualcomm drivers: https://mega.nz/#!4lNliRYJ!3blyZgKug...2UjUIckEFhMRks
This is the recovery firmware for n910f (go to note4/511 and download each and every file ):
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
This is the procedure:
-Open win32diskimager, load the debrick.img(3.74gb for n910f
-Flash it on a blank sd card, the card should be completely formatted and should be in fat32 format.
[/B ]-Once done, put that sd card in your bricked device.
-Connect it to your pc.
-Hold the power button for at least 10 sec or try the download mode key trio.
-It should vibrate.
-If it doesnt, hold it in front of an air conditioner,
let it cool( this has been tested).
-If it still doesnt vibrates, remove the battery, hold the power button for 10sec and then insert the battery.
-Now again try to press power button.
>So, once it vibrates, leave it for around 5min.
-Then press the volume down key+power+home.
-It should boot in to download mode.
-Now you can flash stock rom or recovery firmware
recommend flashing customs roms tho stock rom sucks
if I helped, please press Like!!!
Click to expand...
Click to collapse
i can't download its ask a key to download from mega

Lone_Wolf21 said:
i can't download its ask a key to download from mega
Click to expand...
Click to collapse
Galaxy Note 4 N910T FIXED HARD BRICKED
Hi, i know that this is not the developer's side of the forum, but since i haven't posted a lot, i'm unable to create it over there, but, i have good news for you guys who have a NOTE 4 N910T (T-MOBILE) THIS PROCESS WORKS WITH THE 32GB DEVICE...
forum.xda-developers.com

notnoelchannel said:
Galaxy Note 4 N910T FIXED HARD BRICKED
Hi, i know that this is not the developer's side of the forum, but since i haven't posted a lot, i'm unable to create it over there, but, i have good news for you guys who have a NOTE 4 N910T (T-MOBILE) THIS PROCESS WORKS WITH THE 32GB DEVICE...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks bro

Hello Lone_Wolf21,
I just wanted to ask if you tried this at all, and if it worked? If so, did you lose any data?
Thank you in advance.

Put it in a freezer bag & toss it in the freezer for a hour or 2 try turning it on after that.