Related
Modding Lenovo K3 Note
I anticipate that I will, nor the forum will take responsibility 'of malfunctions and \ or damage!
Part One - CMW Install and Root command line
In this thread, I'll describe a simple, fast, and definitely safer than SPFTools.
SPFTools VCOM working on ports that are not always recognized, sometimes give problems also installing special drivers, they are almost always a problem for Windows because of the signatures on the driver.
Closed this little digression for information, we start with the drivers:
Driver Lenovo K3 Note + PDAnet+:
https://mega.co.nz/#!O4lmBaZa!jCUk1z0BB6wsBgP1P3e5BdoJQtBY_xi6TXuwcBOCv5k
Click to expand...
Click to collapse
Install all drivers Lenovo inside. Once you finished enable the USB debugging and wait for Windows to complete its configuration.
When completed restart the PC and install the utility on the device:
PdaNet:
https://play.google.com/store/apps/details?id=com.pdanet&hl=it
Click to expand...
Click to collapse
Be sure to restart to have all the drivers installed correctly and stay in Debug USB.
Without this included in your terminal this .zip file to obtain permits Root later:
SuperSU:
https://mega.co.nz/#!b8tSiYZJ!yr3okwkxmoR8NqSN10PCEtxsLl25aZ3VUSALqTKszsM
Click to expand...
Click to collapse
Now download this Minimal ADB (with Recovery K3 notes included) from here:
Minimal ADB & Fastboot + K3 Note Recovery (CWM):
https://mega.co.nz/#!rs0lHZrI!hE3Ux99skP-q3RYsgb9KNwX2Dnji192uU0KJB3iQNdo
Click to expand...
Click to collapse
Now comes the fun part!
Unzip the zip file and open the file py_cmd.exe and quietly run these commands:
Code:
adb devices
To ensure that the PC recognizes the device, and if it should be unauthorized make sure that USB debugging is enabled.
Code:
adb reboot bootloader
This command will reboot the phone on a black screen, going in fastboot .
Code:
fastboot devices
This command will confirm the above.
Code:
fastboot flash recovery recovery.img
This command will install the much sought CWM, but it is not over yet!
Code:
fastboot reboot
This command will restart the device.
Perfect! now to get root permissions, there will be that off the device, wait a few seconds and turn it on using this key combination:
VOLUME UP - VOLUME DOWN - POWER
Click to expand...
Click to collapse
Wait until the CWM is not playing, choose obviously the English language.
Subsequently searching
Code:
install zip
... and subsequently ...
Code:
choose zip from /sdcard
... looking for that zip file SuperUser inserted at the beginning.
Et voila! The device is unlocked and ready to receive new rom and functionality!
Part Two - Install new ROM from SPFTools CWM does not work when
Many with the above guide you tried to change the finding in eom stuck.
With this procedure you can go back, but before we move forward I want to give you a few details regarding the update of the rom:
*- The rom mounted on chinese devices with Play Service support and multilanguage already moddate the seller.
*- Given the above, download a rom 'official' (see NeedRom) carrying the phone in its native state.
*- If you need to download the latest versions from the site VibeUI not download the latest available, sometimes the downgrade is not possible (personal experience).
Let's start!
First, before you go ahead to make sure you have followed the guidance post 100% in the first part of the thread.
Follow the link:
SPFTools V5:
https://mega.co.nz/#!G0sVBK5A!M9DovhVgx_aCdXpySq0zmkKvrPbAFePtJgZRXyjtG7w
Click to expand...
Click to collapse
Now unpack everything and put it in a folder convenient for you.
I post the link of a rom in case I tried to see if this will work, even to you. To me it is working well.
In the third part if this rom works almost everyone will get all roms that I find around and decide what to do and what to do.
Rom 1949Deal:
https://www.dropbox.com/s/zep53n1j214ri45/lenovo k3 note rom.rar?dl=0
Password: 1949dealjoy
Click to expand...
Click to collapse
Once downloaded, extract directory in a readily available and open flash_tool.exe .
Before we go on, first remove the battery and attach only the USB cable, then set the SPFTools this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Set in this way the program.
In step [1] look for the previously extracted folder and locate the file.
Give the program a few seconds to load the rom, and after leaving it in Download Only Click Download .
Obviously nothing will happen, to make sure that going forward, you can simply insert the battery and wait for the completion of the transaction.
Reinstall the back cover and turn on the device. Give it about 8/10 minutes for the first startup.
Et voila! We are again ready to modding this Lenovo K3 notes!
Part Three - Collection ROM
In update
You will not find in this type of tour guides, as is the link is driving are my own work, so excluding the Play app store are my property. If you have any problem with the link, do not hesitate to ask.
If you have been useful, it is needless to say that it is a thanks is appreciated!
PS: SORRY FOR MY BAD ENGLISH!
Works like a charm. Thanks
will get my lenovo in a week and will use this guide, Thanks!
just one question, when installing the driver's is phono connected to pc? and is it connected with battery inside it?
kangel said:
Modding Lenovo K3 Note
I anticipate that I will, nor the forum will take responsibility 'of malfunctions and \ or damage!
In this thread, I'll describe a simple, fast, and definitely safer than SPFTools.
SPFTools VCOM working on ports that are not always recognized, sometimes give problems also installing special drivers, they are almost always a problem for Windows because of the signatures on the driver.
Closed this little digression for information, we start with the drivers:
Install all drivers Lenovo inside. Once you finished enable the USB debugging and wait for Windows to complete its configuration.
When completed restart the PC and install the utility on the device:
Be sure to restart to have all the drivers installed correctly and stay in Debug USB.
Without this included in your terminal this .zip file to obtain permits Root later:
Now download this Minimal ADB (with Recovery K3 notes included) from here:
Now comes the fun part!
Unzip the zip file and open the file py_cmd.exe and quietly run these commands:
Code:
adb devices
To ensure that the PC recognizes the device, and if it should be unauthorized make sure that USB debugging is enabled.
Code:
adb reboot bootloader
This command will reboot the phone on a black screen, going in fastboot .
Code:
fastboot devices
This command will confirm the above.
Code:
fastboot flash recovery recovery.img
This command will install the much sought CWM, but it is not over yet!
Code:
fastboot reboot
This command will restart the device.
Perfect! now to get root permissions, there will be that off the device, wait a few seconds and turn it on using this key combination:
Wait until the CWM is not playing, choose obviously the English language.
Subsequently searching
Code:
install zip
... and subsequently ...
Code:
choose zip from /sdcard
... looking for that zip file SuperUser inserted at the beginning.
Et voila! The device is unlocked and ready to receive new rom and functionality!
You will not find in this type of tour guides, as is the link is driving are my own work, so excluding the Play app store are my property. If you have any problem with the link, do not hesitate to ask.
If you have been useful, it is needless to say that it is a thanks is appreciated!
PS: SORRY FOR MY BAD ENGLISH!
Click to expand...
Click to collapse
itzikd1 said:
will get my lenovo in a week and will use this guide, Thanks!
just one question, when installing the driver's is phono connected to pc? and is it connected with battery inside it?
Click to expand...
Click to collapse
Yes, the battery must be installed
thanks, rooted easly, took 5 mintues!
@kangel,thank you very much for this initiative. great contributions. You can visit the thread in Spanish to complement. Thanks again and I'll be here
Better add a custom ROM for Lenovo K3 note in the thread has official Roms of lenovo k3 note are useless bcuz FDD 4G and VPN are not supported in k3 notes official ROM. It would be better if some one finds and updates the thread with k3 notes custom roms available :good:
asif3366 said:
Better add a custom ROM for Lenovo K3 note in the thread has official Roms of lenovo k3 note are useless bcuz FDD 4G and VPN are not supported in k3 notes official ROM. It would be better if some one finds and updates the thread with k3 notes custom roms available :good:
Click to expand...
Click to collapse
Do you have it and know that FDD LTE is not supported? Sounds unlikely as China Unicom has FDD LTE in addition to TDD LTE (and the phone supports China Unicom).
Is there any ROM supporting dual SIMs?
Thanks.
sam10000 said:
Is there any ROM supporting dual SIMs?
Thanks.
Click to expand...
Click to collapse
Every ROM of k3 note official or custom ROM supports dual sim
---------- Post added at 09:45 AM ---------- Previous post was at 09:32 AM ----------
_mfm_ said:
Do you have it and know that FDD LTE is not supported? Sounds unlikely as China Unicom has FDD LTE in addition to TDD LTE (and the phone supports China Unicom).
Click to expand...
Click to collapse
Yes I have lenovo k3 note since few weeks but still I am not able to make FDD 4g work in my K3 note but yes I have fixed the VPN problem with a custom ROM but still 4g is not working in my K3 note.
Hi
Anyone knows where to get the STOCK rom (VIBEUI_V2.5_1512_5.495.1_ST_K50-T5) ?
And also from above CWM , can we flash below DEV rom ? Took from here (http://www.vibeui.com/vibeui/rom?key=k3 note#version-slip1)
VIBEUI_V2.5_1520_7.128.1_DEV_K50-T5
Or need to use FlashTool ?
asif3366 said:
Every ROM of k3 note official or custom ROM supports dual sim
---------- Post added at 09:45 AM ---------- Previous post was at 09:32 AM ----------
Yes I have lenovo k3 note since few weeks but still I am not able to make FDD 4g work in my K3 note but yes I have fixed the VPN problem with a custom ROM but still 4g is not working in my K3 note.
Click to expand...
Click to collapse
What mobile operator do you use?
BTW, Can you check if RDS is supported in the FM Radio app?
Pls add in 1st page for easy reference...
FeyoMx said:
@kangel,thank you very much for this initiative. great contributions. You can visit the thread in Spanish to complement. Thanks again and I'll be here
Click to expand...
Click to collapse
Hi FeyoMx,
Can you please provide us a link to download the fixed CWM recovery ?
the actual recovery (CWM or TWRP) can not do a correct restore, the phone will only reboot to recovery after a restore
Thank you.
dreambo said:
Hi FeyoMx,
Can you please provide us a link to download the fixed CWM recovery ?
the actual recovery (CWM or TWRP) can not do a correct restore, the phone will only reboot to recovery after a restore
Thank you.
Click to expand...
Click to collapse
Hi, here it is. This restores good backups
FeyoMx said:
Hi, here it is. This restores good backups
Click to expand...
Click to collapse
Thank you
I have already see that link, but I do not understand Spanish and in the google translated version, I can not have the download link :
We must follow the link of the china forum, or we have to be registered to see the link in the thread ?
dreambo said:
Thank you
I have already see that link, but I do not understand Spanish and in the google translated version, I can not have the download link :
We must follow the link of the china forum, or we have to be registered to see the link in the thread ?
Click to expand...
Click to collapse
Sorry https://drive.google.com/file/d/0BwmBEcCNY-yhSUVEY1BITnF5Zjg/view?usp=sharing
the instructions for use if you understand?
FeyoMx said:
Sorry https://drive.google.com/file/d/0BwmBEcCNY-yhSUVEY1BITnF5Zjg/view?usp=sharing
the instructions for use if you understand?
Click to expand...
Click to collapse
Thank you very match
No worry for instructions, the most important file is recovery.img and we can flash it using different manners.
I will test it this night at home.
thank you again.
[REQ] SafeCenter
Dear Colleagues,
I have Lenovo Vibe Z2. It has got recently the Lollipop upgrade that works quite well. But Lenovo did not include the SafeCecter app into the upgrade and the old one, extracted from the 4.4 ROM, isn't compatible with the new ROM, it even cannot be installed.
So, my request: would someone be so kind and extract the SafeCecter app from the K3 Note firmware for me? Since the K3 also has Lollipop I hope that your SafeCecter would serve well on my Z2 too.
Thanks a lot in advance!
ctibor said:
Dear Colleagues,
I have Lenovo Vibe Z2. It has got recently the Lollipop upgrade that works quite well. But Lenovo did not include the SafeCecter app into the upgrade and the old one, extracted from the 4.4 ROM, isn't compatible with the new ROM, it even cannot be installed.
So, my request: would someone be so kind and extract the SafeCecter app from the K3 Note firmware for me? Since the K3 also has Lollipop I hope that your SafeCecter would serve well on my Z2 too.
Thanks a lot in advance!
Click to expand...
Click to collapse
I hope you work. place on /System/priv-app and set permissions. greetings.
When compiling ROMs it is advised to use H324 source because it's not so broken and is universal for single/dual sim.
Kernel in development(fixes, etc.) by vitek999 @ 4PDA
https://github.com/vitek999/LGE_H324_Kernel_3.10.54
ROMs for now:
Lollipop (all roms don't have a working hotspot, maybe something minor):
djperya @4pda
AOSP
Exception OS
lol_max_lik @4pda
RessurectionRemix
Dr.Leo6565 @4pda
BlissPop 4.0.3
AICPv10
CM12.1, needs patch, quite buggy
Marshmallow UI
Platinum L
Remix UI
Custom Mod H422
DoogeeOS
VibeUI
ZenUI
Sony Z4 Mod
LivUI
X-Pop
NovaUI
Sensetion OS
Xplay OS
DJUMANJI 4.0
ColorOS
Igronafr229 @4pda
GreatAOSP ROM
CleanPOP 7.0.2
Sense7
ROM galaxy note 5
LP Prime
AisakaYui @4pda
Stock, TWRP flashable
Marshmallow (extremely buggy, headphones don't work at high volumes, cameras barely work):
Dr.Leo6565 @4pda
CrDroid
AICPV11
Igronafr229 @ 4pda
CM13
Kernels for now:
OptiSmartKernel
How to flash?
Best method is MTK FlashTool(download)
Grab uboot (This is for devices that have android 5.0 on them, should work for all models, tested on my H420 and works)
Grab TWRP 3.0
1. Unzip Flashtool.
2. Get recovery.img and uboot.img from recovery and uboot zips.
3. Open flash-tool.exe
4. Select scatter file. which is in the same folder as flash-tool.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Select your uboot and recovery.img click on the highlighted, it will open the file picker.
6. Turn off your phone, plug in usb cable in the computer.
7. Click the download button in flashtool, plug the usb cable.
8. Wait for it to say ok.
DONE!
To enter recovery:
1. Turn phone off.
2. Hold power and volume down
3. When screen turns on, let go of the buttons and quickly hold them again.
4. A menu should appear about factory reset. Don't worry, it won't since the recovery is custom.
5. Select yes using volume keys, you'll need to do it two times.
6. Voila!
To root stock 6.0, download this and place files in flashtool like in the guide above, just pick the files and flash. (recovery.emmc.win = recovery; logo.emmc.win = logo etc.) afterwards you can go ahead and get a magisk zip and flash it (it needs to be modified to be able to patch our device, thanks to the people @ 4pda for being so helpful) here
CREDITS:
Vitek999 for kernel and being very helpful
djperya for flashtool and being very helpful
Everyone else for the ROMs, thanks guys!
Kicka$$ stuff.
Tomo123 said:
Kicka$$ stuff.
Click to expand...
Click to collapse
Thanks, now that I have a working kernel source I'll make my own. Also overclocking will be very easy.
excuse me for my ignorance. Will this work with h440n?
Korelev said:
excuse me for my ignorance. Will this work with h440n?
Click to expand...
Click to collapse
No, these are completely different devices.
Aosp 5.0.2 language
hello today I installed the ROM AOSP 5.0.2 on my lg H420 and noticed that not had my language ( Portuguese - Portugal ).
Already I installed an application to change my language but some aplications as the system continue in English.
someone can give me a hand?
Thyago Vergueira said:
hello today I installed the ROM AOSP 5.0.2 on my lg H420 and noticed that not had my language ( Portuguese - Portugal ).
Already I installed an application to change my language but some aplications as the system continue in English.
someone can give me a hand?
Click to expand...
Click to collapse
Which applications are these? I think that some applications can use only English language.
polfrank said:
Which applications are these? I think that some applications can use only English language.
Click to expand...
Click to collapse
System apps like "phone" "settings" "contacts" "messaging"....
please i need to fix !!!
hello
my phone when i power off and when i put the cable dont do nothing just charge the phone...
can you helpe me?i have debbuging on and i try also off
anatol55 said:
hello
my phone when i power off and when i put the cable dont do nothing just charge the phone...
can you helpe me?i have debbuging on and i try also off
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B_UKqVTCg2_xMUo2XzRzaWVaSzQ/view?usp=drive_web install this
Guys can i unlock bootloader of my lg h442
mayankjet said:
Guys can i unlock bootloader of my lg h442
Click to expand...
Click to collapse
yes just flash it as told to. There's even CM13 (android 6.0.1) just look up the 4pda thread.
so if i update h420 to marshmallow i'll still be able to flash it with this method and gain root access?
+&o_o said:
so if i update h420 to marshmallow i'll still be able to flash it with this method and gain root access?
Click to expand...
Click to collapse
forget my last question (kinda stupid). i have a problem if you guys could help me would be great. after flashing everything succesfully on the phone, wich is a spirit H420, under phone info now i get H422. it wouldn't be a problem if only i could flash the marshmallow kdz meant for the H420, but the installation process via LGUP doesn't even start. i've seen interesting stuff on 4pda, maybe i could find H420 lollipop stock there? to start from scratch before updating?
can anyone help me to revert the phone info?
+&o_o said:
forget my last question (kinda stupid). i have a problem if you guys could help me would be great. after flashing everything succesfully on the phone, wich is a spirit H420, under phone info now i get H422. it wouldn't be a problem if only i could flash the marshmallow kdz meant for the H420, but the installation process via LGUP doesn't even start. i've seen interesting stuff on 4pda, maybe i could find H420 lollipop stock there? to start from scratch before updating?
can anyone help me to revert the phone info?
Click to expand...
Click to collapse
In my case, I tried to upgrade my H420 from LP to MM via lg Mobile support tool or lg pc suite, but neither does the trick, constantly getting error. I have the MM .kdz file that is named as "H42020C_00_0530" but I tried to flash it through lg flashtool 2014, this one in vain too. What I should do to get Marshmallow? Thanks!
paulalastor said:
In my case, I tried to upgrade my H420 from LP to MM via lg Mobile support tool or lg pc suite, but neither does the trick, constantly getting error. I have the MM .kdz file that is named as "H42020C_00_0530" but I tried to flash it through lg flashtool 2014, this one in vain too. What I should do to get Marshmallow? Thanks!
Click to expand...
Click to collapse
apparently marshmallow can't be flashed using flashtool 2014, in 4pda there's a link to this video. the video is in russian, but to put it simply: go to lg site of your country, go to support, find your device, download drivers and "LG support tool" wich is a new version of the 2014 flash tool, install both of them, insert the phone turned on because the software needs to recognise the model of the phone. it will find the upgrade, "the phone may reboot, do not disconnect etc.", sadly it will go through the process of downloading the update from the internet, so no use of our kdz.
i've managed to get untill "upgrade available" step using a mobile connection, but since the firewall of my university is filtered (and beside the weight of the file, my phone would reboot, so no tethering) i can't update now. as soon as i get to a private connection i'll try. let me know if you succeed.
+&o_o said:
apparently marshmallow can't be flashed using flashtool 2014, in 4pda there's a link to this video. the video is in russian, but to put it simply: go to lg site of your country, go to support, find your device, download drivers and "LG support tool" wich is a new version of the 2014 flash tool, install both of them, insert the phone turned on because the software needs to recognise the model of the phone. it will find the upgrade, "the phone may reboot, do not disconnect etc.", sadly it will go through the process of downloading the update from the internet, so no use of our kdz.
i've managed to get untill "upgrade available" step using a mobile connection, but since the firewall of my university is filtered (and beside the weight of the file, my phone would reboot, so no tethering) i can't update now. as soon as i get to a private connection i'll try. let me know if you succeed.
Click to expand...
Click to collapse
No way with lg support tool, it didn't pass over the download of the firmware, just give error. I resolved following (by google translate) this: http://4pda.ru/forum/index.php?showtopic=686154&st=2500#entry50284916, then the green colored link Прошивка android 6.0 с нуля через LG Flashtool, finally download the attachment named H422, about 1,1 Gb. But the guide assumes that you utilize a firmware with .dz extension, not .kdz...We need an extractor/converter, just get this http://forum.xda-developers.com/attachment.php?attachmentid=3136613&stc=1&d=1422375946.
Then, if you have, like me, downloaded the v20c MM stock firmware from a site like this: http://lg-phone-firmware.com/index.php?id_mod=190, just extract the two files needed to flash our H420: "LGUPc.dll" and "H42020c00.dz". I hope I've explained myself well or almost....:silly:
If needed, just ask. I'm pretty happy with my solution.:victory:
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
I'm just searching/waiting now for root process...
paulalastor said:
No way with lg support tool, it didn't pass over the download of the firmware, just give error. I resolved following (by google translate) this: http://4pda.ru/forum/index.php?showtopic=686154&st=2500#entry50284916, then the green colored link Прошивка android 6.0 с нуля через LG Flashtool, finally download the attachment named H422, about 1,1 Gb. But the guide assumes that you utilize a firmware with .dz extension, not .kdz...We need an extractor/converter, just get this http://forum.xda-developers.com/attachment.php?attachmentid=3136613&stc=1&d=1422375946.
Then, if you have, like me, downloaded the v20c MM stock firmware from a site like this: http://lg-phone-firmware.com/index.php?id_mod=190, just extract the two files needed to flash our H420: "LGUPc.dll" and "H42020c00.dz". I hope I've explained myself well or almost....:silly:
If needed, just ask. I'm pretty happy with my solution.:victory:
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
I'm just searching/waiting now for root process...
Click to expand...
Click to collapse
DONE! thanks mate! owe you one
a clarification to anyone who might come here: the 2013 version of lg flash tool, wich is required for this guide is contained in the H422.rar of the russian guide. it took me a couple of minutes to understand. also i didn't understand the part of the green link, but i managed to update anyway, so i think your advice is pretty clear.
i'm not sure if this kind of update was needed for my device (didn't try upgrade tool), but since it was succesfull for you, i already posses the .kdz and i'm on a limited connection, i decided to give it a try...and SUCCESS!
already like marshmallow, hope memory leak doesn't affect our devices, and can't wait for root!
Some ROM`s
crDroid Android (6.0.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50064727
CyanogenMod 12.1 (5.1.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50327122
CyanogenMod 13 (6.0.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=49486910
Blisspop (5.1.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50521514
AICP v10 (5.1.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50521514
Ressurection Remix (5.1.1) - ttp://4pda.ru/forum/index.php?s=&showtopic=686154&view=findpost&p=50521997
marshmallow root
quick update for you guys. it appears that on 4pda someone has managed to get permanent root.
here's the http://4pda.ru/forum/index.php?showtopic=686154&st=3180#entry50879512 link
How To install the Latest Stable Firmware of Lenovo k3 note Model K50-T5System Version: K50-T5_USR_ST1614_5.294.1_1604011150_mp1V2.39_CN
Fit models: Le lemon k3 note (K50-T5)
All necessary files can be found here ## Google drive link
Please take note that this is the Original Stock Firmware for the Model K50-T5 with Chinese/English support only and also is not Coming with Gapps Pre-installedChangelog##
Code:
[B][CENTER]This ROM is based on the official 1613 vibe3.1 Android 6.0 stable version
The problem has been fixed or changed (compared with the previous software has been released shall indicate whether there is a large Android version upgrade):
1, only charging mode plug USB, the computer can read the phone memory problem
2. Connect the AP to WEP encryption in WLAN scanning interface will continue to appear WLAN automatically shut down, open issues
3, switch the phone to the default external memory storage, OTA upgrade failure
4, the upgrade version of MR1 to stop running when M Bluetooth Sharing[/CENTER][/B]
>>Now Before you doing anything it's recommended to Backup your contacts and important data into your memory card or your laptop or your PC and Your Phone must have least 50% of battery <<Step 1. Extract the Downloaded files on your Laptop/Pc
Step 2.Install LenovoUsbDriver_v1.1.13 On your Pc and after the Instalation Restart your Laptop/PC
Step 3.If u allready did a backup of your important Data Power Off your Device
Step 4.Run the Sp flash tool(Its inside the Zip file with the Rom that u downloaded)
Step 5. Now navigate to Option/Download/General setting/DL DL All with checksum Tab and check Usb Checksum and EMMC checksum like in the picture down bellow and after setting that up click on X
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 6.Now from "Download" Tab click on "Scatter-Loading" and Navigate to the Scatter-Loading file(it should be like this path Your PC\K50-T5_USR_ST1614_5.294.1_1604011150_mp1V2.39_CN\target_bin\MT6752_Android_scatter)see picture bellow
Step 7.Once you Hit Open on the MT6752_Android_scatter a Procesing window will pop up(see picture bellow) Loading the necessary files for Flashing(its about 30sec-1min sec depending on your PC configuration)
Step 8. Now Click On Download Tab and Set Firmware Upgrade
Step 9. Now Connect your Phone(Turned Off) To the Pc/Laptop using Usb cable and wait about 10-15 for the Flashing Process
Step 10. Once the Flashing Process is completed a Green window will Pop Up
Step 11.Close the SP flash Tool and disconnect your phone from the Pc/Laptop
Step 12. Turn on Your Phone and wait about 10 mins for the further installation
Step 13. Congrats You have the Last stable K50-T5_USR_ST1614_5.294.1_1604011150_mp1V2.39_CN version installed
About Installing custom recovery on K3 Note using SP Flash Tool Follow This COMPLETE TUTORIALThanks To @stone_henge
ALSO FOLLOW THIS COMPLETE TUTORIALHow to Root and Flash Gapps on Lenovo K3 Note Official Stock Vibeui 3.1 1614 St Android 6.0
If you found his Tutorial guide useful you can Click the Thanks! buttonMany thanks to everyone of the Lenovo K3 Note Index Thread especially @hackerpower @stone_henge @911-Future_Maker
Original source :club.lenovo.com.cn
Finally!!! I'm looking for a tutorial like this for forever!! Thank you so much!! Just a quick question. Will this rom work in Greece?? And second now I'm chinese vibeui on Android 5.1. Can I install this rom?
Sent from my Lenovo K50-t5 using XDA-Developers mobile app
Grigoris0r20r said:
Finally!!! I'm looking for a tutorial like this for forever!! Thank you so much!! Just a quick question. Will this rom work in Greece?? And second now I'm chinese vibeui on Android 5.1. Can I install this rom?
Sent from my Lenovo K50-t5 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes this Rom can work in Greece just follow everything in the Tutorial, and this is the Official Cn/En version of the Rom. If you want Multilanguage(and thats the other Model K50A40 ROW but nevermind they are for the same phone) Follow this Post Tutorial How to install Latest ROW S422/S424 VIA SP FLASH TOOL
Really?? And the multilingual will also work in Greece right?? Oh does Google play is pre-installed in the multilingual rom or do I have to flash it?
Sent from my Lenovo K50-t5 using XDA-Developers mobile app
Grigoris0r20r said:
Really?? And the multilingual will also work in Greece right?? Oh does Google play is pre-installed in the multilingual rom or do I have to flash it?
Sent from my Lenovo K50-t5 using XDA-Developers mobile app
Click to expand...
Click to collapse
The K50A40 comes with Gapps preinstalled is multilanguage and have Vr mode feauture.
perfect!!! thank you so so much for your time and for helping me!! amazing post!! thank you again for all your help!
consulta
a query, I have updated with android Marshmallow version 6.0, but does not run any service I google my question is , if I change the roma this may use the services of google ? many thanks
una consulta, yo tengo actualizado con la version Marshmallow android 6.0, pero no me corre ningun servicio de google, mi pregunta es, si cambio la roma a esta se podra utilizar los servicios de google? muchisimas gracias
panxosk8 said:
a query, I have updated with android Marshmallow version 6.0, but does not run any service I google my question is , if I change the roma this may use the services of google ? many thanks
una consulta, yo tengo actualizado con la version Marshmallow android 6.0, pero no me corre ningun servicio de google, mi pregunta es, si cambio la roma a esta se podra utilizar los servicios de google? muchisimas gracias
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/k3-note/general/lenovo-k50-t5-vibeui-3-1-1614-st-t3360567
Nice tutorial mate! Keep it up. :highfive:
911-Future_Maker said:
Nice tutorial mate! Keep it up. :highfive:
Click to expand...
Click to collapse
Thanks mate i Did this because of the Repeated questions/Posts Of The new Users that are lazy to do a simple search through the thread search Option You know what i Mean
Btw This Video is Devoted for all of Them
You are a Noob on XDA-Developers
Gracias
emptywordsss said:
Follow this http://forum.xda-developers.com/k3-note/general/lenovo-k50-t5-vibeui-3-1-1614-st-t3360567
Click to expand...
Click to collapse
Muchas gracias amigo _
google play services issues ?
this looks great. does my phone have to be rooted ? also if i do this will loading google play services and play store run without stopping. thanx
wriggles72 said:
this looks great. does my phone have to be rooted ? also if i do this will loading google play services and play store run without stopping. thanx
Click to expand...
Click to collapse
You dont need to be rooted and this is also excellent example if your phone get Bricked,stucked in bootloop or something else ...Also note that k50-T5 isn't coming with Gapps pre-installed you need to do that manually (see for more info in the Tutorial section) and have only chinese/english support
Hello! Any idea how to root the new s427 row rom?? Or I can use the root method from the s424?
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Grigoris0r20r said:
Hello! Any idea how to root the new s427 row rom?? Or I can use the root method from the s424?
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Click to expand...
Click to collapse
Ofcourse mate Download and flash S427 patched boot and after that flashSuperSU-v2.74-PRO and you are good to go :fingers-crossed:
emptywordsss said:
Ofcourse mate Download and flash S427 patched boot and after that flashSuperSU-v2.74-PRO and you are good to go :fingers-crossed:
Click to expand...
Click to collapse
And I follow the steps from s424 root method right? Thank you so much for your quick reply!
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Grigoris0r20r said:
And I follow the steps from s424 root method right? Thank you so much for your quick reply
Click to expand...
Click to collapse
No problem at all mate and Yes the steps are the same like the previous update.
emptywordsss said:
No problem at all mate and Yes the steps are the same like the previous update.
Click to expand...
Click to collapse
for rooting the previous version i have used this method. http://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
but there i had a recovery image that i flashed through SP flash tool. Now i have a boot image. how i flash this? via flash tools again? or with stock recovery? if you can give me a small tutorial it would be really apreciated. sorry for all those questions.
Grigoris0r20r said:
for rooting the previous version i have used this method. http://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
but there i had a recovery image that i flashed through SP flash tool. Now i have a boot image. how i flash this? via flash tools again? or with stock recovery? if you can give me a small tutorial it would be really apreciated. sorry for all those questions.
Click to expand...
Click to collapse
First of all flash TWRP from the link you posted and than flash the files through TWRP recovery.
Oh man! You Are The Man!
My Lollipop went into any endless loop about Something Unexpectedly Stopped...
Decided to upgrade to Marshmallow. Then found your fantastic tutorial. Follow it and voila, Android 6!
Keep up the good work!
---------- Post added at 08:19 PM ---------- Previous post was at 07:28 PM ----------
One quick question: Can I take OTA updates? There's one waiting...
Thanks again.
Our device is officially supported for dualboot using the app Dualboot Patcher, it allows to dualboot multiple android version, example LineageOS and AOKP, unfortunately it doesnt allow Android 6.0 and 7.0 at same time due to changes in preloader. So im here to give a guide on how we can do this, it should work with any rom if its android 6 with android 6 or 7 with 7. If you like this guide you can donate to me here: https://www.paypal.me/RubenCraveiro
Any questions you might have please post below and ill be sure to try and help
Requirements:
Root and a version for dualboot.
/*Tested on: LineageOS with AOKP on 6.0 */
/* Stock Rom with Lineage on 6.0 */
So first thing you have to do is download the secondary rom of your choice, it needs to be a flashable zip, not a zip for sp flash tools.
After downloading the rom, download this apk: https://goo.gl/FBnJWG
After you installed the apk, open it go on ROMs tab and you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After granting root permissions you should see the above page, press the set now button to set kernel as default.
After doing that and having the secondary rom downloaded, follow the next steps on the next images to configure the flashable zip for dualbooting.
After choosing rom continue next image.
Patch the zip now, after zip is patched go back to ROMs page and follow the next images.
After selecting the patched zip, it will ask if you want to change location, keep it, a quick info is that, if you want to add google apps to dualbooted rom, you have to patch the gapps zip and set the location to the ID(android name) you previously made of the dualbooted rom, so that it doesnt install on primary rom and flashes to the secondary rom.
You should press the ✓ button after selecting patched zip and should start installing the rom.
After it flashes simply select the rom on ROMs page and reboot, to go back to primary rom simply install the app on secondary rom.
Quick info on device name error, if the app says it cant find device name "elephone" you need to change the build prop device name "elephone" to "p9000" (case sensitive) and do a reboot after to apply changes.
Known issues:
Rotating device or leaving in background while flashing causes app to crash when reentering the app.
Special Thanks to
@chenxiaolong for the awesome DualBootPatcher.
--- Roms that should work ---
Android 6 Dualboot with LineageOS 14.1;
LineageOS 13 with LineageOS 14.1;
AOKP6 with LineageOS 14.1/LineageOS 13;
RR 6.0 with Stock Rom(6.0) / LineageOS 13/14.1;
-- Does Not Work --
Android 6 with Android 7.0 (stock roms)
Android 7 with Lineage 13/14.1
Android 7 with AOKP 6/7
Reason to why some work and some dont is because, android stock roms on 7.0 have changes in preloader that makes older roms not dualboot, if such is attempted to do. LineageOS 14.1 is Android 7.1 but it is based on old preloader so it should work with any android 6 rom. AOKP 7 is based on LineageOS 14.1 sources so it is also based on old preloader and as such should also work with any android 6 rom + LineageOS 14.1.
If you have any questions or you are unsure about anything, just ask.
will try this with official 7.0 an Eragon 5, will tell you sooner or later
Kernel
Hi i use to dual boot Eragon and Stock Rom but on eragon dual boot app says :"could not determine boot partition because this devices codename "elephone" is not recognized
aljoscha81 said:
Hi i use to dual boot Eragon and Stock Rom but on eragon dual boot app says :"could not determine boot partition because this devices codename "elephone" is not recognized
Click to expand...
Click to collapse
On buildprop change the device name to p9000(case sensitive), theres a few roms that have the name Elephone and not p9000 and need to be modified manually, but its simple and easy
Got no luck any idea?
Update it is impotant to write a little p otherwise it wont work thanks a lot
aljoscha81 said:
Got no luck any idea?
Update it is impotant to write a little p otherwise it wont work thanks a lot
Click to expand...
Click to collapse
its case sensitive i think, instead of P9000 do p9000 it should be able to find after
Found another Problem im on android 7 from needrom build 419 and want to dualboot eragon 7 but when i select the zip to patch it opens the zip. And i cant do anything from that point on i only see the files inside the zip.
Got the problem solved long press on the zip.
Sry long for time not give a feedback....managed dualboot android6 and7 but problem when using primery rom too long .... Secondary rom only got boot loop ......................i see in kernel of secondery rom every time a really old kernel 3.18.22. First. Kernel ever?
---------- Post added at 10:51 PM ---------- Previous post was at 10:49 PM ----------
It ever stand by boot animation for all time ............................. . .............................
aljoscha81 said:
Sry long for time not give a feedback....managed dualboot android6 and7 but problem when using primery rom too long .... Secondary rom only got boot loop ......................i see in kernel of secondery rom every time a really old kernel 3.18.22. First. Kernel ever?
---------- Post added at 10:51 PM ---------- Previous post was at 10:49 PM ----------
It ever stand by boot animation for all time ............................. . .............................
Click to expand...
Click to collapse
It works but stays in bootloop, thats why i said it doesnt work on different versions
Is it possible to install iOS rom with Android 7?
pimandro said:
Is it possible to install iOS rom with Android 7?
Click to expand...
Click to collapse
its only possible 6.0 with 6.0 roms and 7.0 7.0/7.1.. this is due to changes in preloader between version, and im not sire what are you talking about, an ios rom, if you talking about actual ios for an androod device, that doesnt even exist for any device.. and a skinned android i dont think it exists either, to our device at least..
Little Update: LineageOS 14.1 and AOKP 7 is based on old preloader so these work with any android 6 rom. Android Stock Rom 7.0 still does not work since its still based on a newer preloader. (This is just to help anyone that comes across this and doesnt get confused)
Ruben Craveiro said:
its only possible 6.0 with 6.0 roms and 7.0 7.0/7.1.. this is due to changes in preloader between version, and im not sire what are you talking about, an ios rom, if you talking about actual ios for an androod device, that doesnt even exist for any device.. and a skinned android i dont think it exists either, to our device at least..
Click to expand...
Click to collapse
Sorry for my ignorance.
I have android 7.0 (419) on my p9000, can I also install lineageos 14. 1?
Thank you.
pimandro said:
Sorry for my ignorance.
I have android 7.0 (419) on my p9000, can I also install lineageos 14. 1?
Thank you.
Click to expand...
Click to collapse
No you cant, unfortunatelly LOS14.1 is based on the older preloader so it only works android 6.0/AOKP6/AOKP7/RR + LOS14.1
Can I install lineageos 14.1 with android 6.0 and then update android 6.0 to official 7.0?
javier_abad2001 said:
Can I install lineageos 14.1 with android 6.0 and then update android 6.0 to official 7.0?
Click to expand...
Click to collapse
You cant, if you want to update to android 7.0 you will need to update preloader, and cm14.1/aokp7 doesnt support the updated preloader, but android 6 with los14.1 should work
And how I downgrade from Android 7.0 to 6.0 if the preloader it's not the same????
javier_abad2001 said:
And how I downgrade from Android 7.0 to 6.0 if the preloader it's not the same????
Click to expand...
Click to collapse
download the stock android 6 rom and flash it to the device using spft, with all partitions checked, it should return to android 6 and also revert the preloader to an older version, and by the way, if for some reason the device doesnt boot, go on the lineage thread and download the preloader and the other images it provides and flash them, android 6 should be able to boot and you should also be able to just flash lineage through twrp
Ruben Craveiro said:
download the stock android 6 rom and flash it to the device using spft, with all partitions checked, it should return to android 6 and also revert the preloader to an older version, and by the way, if for some reason the device doesnt boot, go on the lineage thread and download the preloader and the other images it provides and flash them, android 6 should be able to boot and you should also be able to just flash lineage through twrp
Click to expand...
Click to collapse
And this in download only, ok system update or how?
javier_abad2001 said:
And this in download only, ok system update or how?
Click to expand...
Click to collapse
just google it, plenty of guides explaining how to use sp flash tools.
Hello guys. Can i install a X00T or X00TD custom rom to my X00TDB? Is it safe??
I tried flashing a lineage os rom into my x00tdb and I got error 7, which means I am trying to flash an incompatible rom
rafakamada said:
I tried flashing a lineage os rom into my x00tdb and I got error 7, which means I am trying to flash an incompatible rom
Click to expand...
Click to collapse
My Zenfone Max Pro M1 is modeled X00TDB and yet i have no problem installing custom rom for my device(currently on Superior OS with Corvus kernel). Try other custom roms and see if it works for you
rafakamada said:
I tried flashing a lineage os rom into my x00tdb and I got error 7, which means I am trying to flash an incompatible rom
Click to expand...
Click to collapse
I have the same Problem, but for some reason I cannot flash TWRP on my X00TDB Devices, it just fails everytime, can you guys help me out?
OT4KUBoi said:
I have the same Problem, but for some reason I cannot flash TWRP on my X00TDB Devices, it just fails everytime, can you guys help me out?
Click to expand...
Click to collapse
Have you unlock the bootloader??
virganda said:
Have you unlock the bootloader??
Click to expand...
Click to collapse
Yes, the bootloader is already unlocked, thats why I think its so strange, also in Android Recovery it says: asus/WW_X00TD/ASUS_X00T_1 is that normal, eventhough it is an X00TDB?
---------- Post added at 06:34 PM ---------- Previous post was at 06:22 PM ----------
1234What said:
My Zenfone Max Pro M1 is modeled X00TDB and yet i have no problem installing custom rom for my device(currently on Superior OS with Corvus kernel). Try other custom roms and see if it works for you
Click to expand...
Click to collapse
How did you manage to install TWRP on your X00TDB in the first place? I just get errors
MrJohn101 said:
Hello guys. Can i install a X00T or X00TD custom rom to my X00TDB? Is it safe??
Click to expand...
Click to collapse
You can install X00T ROMs/Recoveries on X00TD/X00TDB.
The difference between these three are:
X00T - Global variant of Asus Zenfone Max Pro M1
X00TD - Indian variant
X00TDB - 4/6GB Global variant
X00TDA - 3GB Indian Variant
However, custom ROMs/Kernel gives you freedom and not keep you restricted specifically to flash a certain ROM/kernel to a certain device model.
saurabhcharde said:
You can install X00T ROMs/Recoveries on X00TD/X00TDB.
The difference between these three are:
X00T - Global variant of Asus Zenfone Max Pro M1
X00TD - Indian variant
X00TDB - 4/6GB Global variant
X00TDA - 3GB Indian Variant
However, custom ROMs/Kernel gives you freedom and not keep you restricted specifically to flash a certain ROM/kernel to a certain device model.
Click to expand...
Click to collapse
Interesting, I couldn't find absolutely any Information on that matter, do you also have experience on installing TWRP Recovery on X00TDB?
*UPDATE: I solved it by disconnecting the phone, exexuting the bootloader flash command and after getting "waiting for device" plug the phone back in the computer.
OT4KUBoi said:
Interesting, I couldn't find absolutely any Information on that matter, do you also have experience on installing TWRP Recovery on X00TDB?
Click to expand...
Click to collapse
Yep.
saurabhcharde said:
Yep.
Click to expand...
Click to collapse
I solved it by disconnecting the phone, exexuting the bootloader flash command and after getting "waiting for device" plug the phone back in the computer.
Now I have a new problem, when I try to Install the official LineageOS X00TD https://download.lineageos.org/X00TD on my X00TDB Device I get an error 7 message on TWRP, do you know a solution?
---------- Post added at 07:29 PM ---------- Previous post was at 06:54 PM ----------
saurabhcharde said:
You can install X00T ROMs/Recoveries on X00TD/X00TDB.
The difference between these three are:
X00T - Global variant of Asus Zenfone Max Pro M1
X00TD - Indian variant
X00TDB - 4/6GB Global variant
X00TDA - 3GB Indian Variant
However, custom ROMs/Kernel gives you freedom and not keep you restricted specifically to flash a certain ROM/kernel to a certain device model.
Click to expand...
Click to collapse
Do you know if it is possible to install official X00TD LineageOS https://download.lineageos.org/X00TD on my X00TDB Device?
1234What said:
My Zenfone Max Pro M1 is modeled X00TDB and yet i have no problem installing custom rom for my device(currently on Superior OS with Corvus kernel). Try other custom roms and see if it works for you
Click to expand...
Click to collapse
Can you provide a Link to to Superior OS with Corvus kernel?
OT4KUBoi said:
Yes, the bootloader is already unlocked, thats why I think its so strange, also in Android Recovery it says: asus/WW_X00TD/ASUS_X00T_1 is that normal, eventhough it is an X00TDB?
---------- Post added at 06:34 PM ---------- Previous post was at 06:22 PM ----------
How did you manage to install TWRP on your X00TDB in the first place? I just get errors
Click to expand...
Click to collapse
Unlocked the bootloader using the unofficial way then flashed this TWRP version https://drive.google.com/open?id=1FkQVkqwkNBfDP5kT5YfSo3wxV1Ql0epx
---------- Post added at 05:06 PM ---------- Previous post was at 05:01 PM ----------
OT4KUBoi said:
Can you provide a Link to to Superior OS with Corvus kernel?
Click to expand...
Click to collapse
Superior OS - https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development/10-0-superior-os-t3993083
Corvus kernel --> https://travarilo.github.io/darkonah.id/
1234What said:
Unlocked the bootloader using the unofficial way then flashed this TWRP version https://drive.google.com/open?id=1FkQVkqwkNBfDP5kT5YfSo3wxV1Ql0epx
---------- Post added at 05:06 PM ---------- Previous post was at 05:01 PM ----------
Superior OS - https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development/10-0-superior-os-t3993083
Corvus kernel --> https://travarilo.github.io/darkonah.id/
Click to expand...
Click to collapse
Why the Corvus Kernel, isn't the Phoenix one better?
Edit*: I mean how to install this one? First the standard Phoenix and then the Corvus Kernel as an Additional zip on TWRP or what? - Because Corvus Kernel alone is only 12MB
Edit*2 If Error 7 appears again, should I try this?
https://www.youtube.com/watch?v=wed03948gcg
OT4KUBoi said:
Why the Corvus Kernel, isn't the Phoenix one better?
Edit*: I mean how to install this one? First the standard Phoenix and then the Corvus Kernel as an Additional zip on TWRP or what? - Because Corvus Kernel alone is only 12MB
Edit*2 If Error 7 appears again, should I try this?
https://www.youtube.com/watch?v=wed03948gcg
Click to expand...
Click to collapse
---> Corvus Kernel is one of my favorite custom kernels out there, It provides a great battery backup with overclocked CPU and GPU frequencies,(Its just my preferences but you can try other custom kernels out there with your favorite custom roms)
--> Corvus is just a custom kernel modified for Zenfone Max Pro M1, its not a full rom so don't try to flashed it without a rom installed.
--> Did encounter Status Error 7 before on Lineage OS, but I just try other custom roms. Modifying something that is out of your comfort zone is not advisable but if you want to do it, go ahead (Fortune favours the bold)
1234What said:
---> Corvus Kernel is one of my favorite custom kernels out there, It provides a great battery backup with overclocked CPU and GPU frequencies,(Its just my preferences but you can try other custom kernels out there with your favorite custom roms)
--> Corvus is just a custom kernel modified for Zenfone Max Pro M1, its not a full rom so don't try to flashed it without a rom installed.
--> Did encounter Status Error 7 before on Lineage OS, but I just try other custom roms. Modifying something that is out of your comfort zone is not advisable but if you what to do it, go ahead (Fortune favours the bold)
Click to expand...
Click to collapse
Your advice is much appreciated, thank you! I will give it a try to see how it goes.
OT4KUBoi said:
Your advice is much appreciated, thank you! I will give it a try to see how it goes.
Click to expand...
Click to collapse
OK, I tried to install SuperiorOS natively at first, but error 7 appeared again, so I took the leap of faith and tried my "modified"( by deleting the first two lines of code) and it completely worked!
My X00TDB is recognized as an X00TD now, but it works flawlessly so far!
---------- Post added at 09:36 PM ---------- Previous post was at 09:36 PM ----------
1234What said:
---> Corvus Kernel is one of my favorite custom kernels out there, It provides a great battery backup with overclocked CPU and GPU frequencies,(Its just my preferences but you can try other custom kernels out there with your favorite custom roms)
--> Corvus is just a custom kernel modified for Zenfone Max Pro M1, its not a full rom so don't try to flashed it without a rom installed.
--> Did encounter Status Error 7 before on Lineage OS, but I just try other custom roms. Modifying something that is out of your comfort zone is not advisable but if you want to do it, go ahead (Fortune favours the bold)
Click to expand...
Click to collapse
OK, I tried to install SuperiorOS natively at first, but error 7 appeared again, so I took the leap of faith and tried my "modified"( by deleting the first two lines of code) and it completely worked!
My X00TDB is recognized as an X00TD now, but it works flawlessly so far!
OT4KUBoi said:
OK, I tried to install SuperiorOS natively at first, but error 7 appeared again, so I took the leap of faith and tried my "modified"( by deleting the first two lines of code) and it completely worked!
My X00TDB is recognized as an X00TD now, but it works flawlessly so far!
---------- Post added at 09:36 PM ---------- Previous post was at 09:36 PM ----------
OK, I tried to install SuperiorOS natively at first, but error 7 appeared again, so I took the leap of faith and tried my "modified"( by deleting the first two lines of code) and it completely worked!
My X00TDB is recognized as an X00TD now, but it works flawlessly so far!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fortune favors the bold :good:
My Asus M1 phone does not supporting camera ,calls, and WiFi after I rooted my phone using,, magisk 20.v and decrypt.pie what should I do..
OT4KUBoi said:
I solved it by disconnecting the phone, exexuting the bootloader flash command and after getting "waiting for device" plug the phone back in the computer.
Now I have a new problem, when I try to Install the official LineageOS X00TD https://download.lineageos.org/X00TD on my X00TDB Device I get an error 7 message on TWRP, do you know a solution?
---------- Post added at 07:29 PM ---------- Previous post was at 06:54 PM ----------
Do you know if it is possible to install official X00TD LineageOS https://download.lineageos.org/X00TD on my X00TDB Device?
Click to expand...
Click to collapse
Try installing latest TWRP and check. If it still gives you error then flash OrangeFox recovery it'll work out
saurabhcharde said:
Try installing latest TWRP and check. If it still gives you error then flash OrangeFox recovery it'll work out
Click to expand...
Click to collapse
Your response is very appreciated, thank you for that, but I found an "almost" perfect solution for this problem:
I used this guide:
https://www.youtube.com/watch?v=9IH6WgnjwMk
Positives:
- This method worked for me and I was able to install my Lineage OS ROM (Should work with other OS too, but I haven't tested it) and it is operating flawlessly so far.
Negatives:
- Even though my ASUS Modell is originally a X00TDB, since the Install of LOS somehow softwarewise it turned into a X00TD(This was the only Modell supported by official LOS), which in itself is not a big deal in my Opinion.
- ...probably because of this reason, I cannot install Updates from the integrated LOS Updater, I guess I have to always install manually, but last time I tried the same method like shown in the Video, updating manually did not work for me, maybe if I format the Phone and do a clean install it might work, but I have an Android 9 at the moment and it is kind of bothering for me to delete my whole data (+200GB) now, so I will probably try again, when I see fit.