Database Users

Stock A500FU PERMISSIVE kernel needed

Right so many of us use stock rom on A500FU (2015) as its a good daily driver. Not the issue is I'm useless at compiling so is there anyone who can compile a stock kernel but... permissive as standard for us viper4android users and other reason, I'm sure there are 1000s who would appreciate it. I can provide the stock boot if nessacary
Sent from my SM-A500FU

jimbomodder said:
Right so many of us use stock rom on A500FU (2015) as its a good daily driver. Not the issue is I'm useless at compiling so is there anyone who can compile a stock kernel but... permissive as standard for us viper4android users and other reason, I'm sure there are 1000s who would appreciate it. I can provide the stock boot if nessacary
Sent from my SM-A500FU
Click to expand...
Click to collapse
Here you go:
A500FUXXU1BOL1_permissive_boot
.

ashyx said:
Here you go:
A500FUXXU1BOL1_permissive_boot
.
Click to expand...
Click to collapse
Thanks man but it hangs on splash then reboots constantly
Sent from my SM-A500FU

jimbomodder said:
Thanks man but it hangs on splash then reboots constantly
Sent from my SM-A500FU
Click to expand...
Click to collapse
Which firmware build are you on?
Can you post up your boot.img?
Try this one: A500FUXXU1BOL1_permissive_boot

ashyx said:
Which firmware build are you on?
Can you post up your boot.img?
Click to expand...
Click to collapse
Here you go

ashyx said:
Which firmware build are you on?
Can you post up your boot.img?
Try this one: A500FUXXU1BOL1_permissive_boot
Click to expand...
Click to collapse
Get kernel warning but just hangs at splash.
Sent from my SM-A500FU

jimbomodder said:
Get kernel warning but just hangs at splash.
Sent from my SM-A500FU
Click to expand...
Click to collapse
I have recompiled the kernel with no changes except set the enforcing flag to false and used your ramdisk.
If this doesn't boot then Samsungs source code is probably borked.
I have also uploaded a simply unpacked and repacked kernel with absolutely no changes. If this doesn't boot then there's an issue with simply repacking the kernel which could be because it is unsigned. This is not the first time Ive had this happen.
https://www.androidfilehost.com/?fid=24533103863137813
https://www.androidfilehost.com/?fid=24533103863137814

ashyx said:
I have recompiled the kernel with no changes except set the enforcing flag to false and used your ramdisk.
If this doesn't boot then Samsungs source code is probably borked.
I have also uploaded a simply unpacked and repacked kernel with absolutely no changes. If this doesn't boot then there's an issue with simply repacking the kernel which could be because it is unsigned. This is not the first time Ive had this happen.
https://www.androidfilehost.com/?fid=24533103863137813
https://www.androidfilehost.com/?fid=24533103863137814
Click to expand...
Click to collapse
First one hangs, second boots with the warning

jimbomodder said:
First one hangs, second boots with the warning
Click to expand...
Click to collapse
This is the exact same situation I had with the Tab A which uses the same platform and source code: Qualcomm MSM8916 Snapdragon 410.
Looks like again Samsung have fudged up the kernel source.
Are you able to set permissive via ADB or SElinux changer?

ashyx said:
This is the exact same situation I had with the Tab A which uses the same platform and source code: Qualcomm MSM8916 Snapdragon 410.
Looks like again Samsung have fudged up the kernel source.
Are you able to set permissive via ADB or SElinux changer?
Click to expand...
Click to collapse
Yeah selinux changer works fine. Thanks for the efforts

jimbomodder said:
Yeah selinux changer works fine. Thanks for the efforts
Click to expand...
Click to collapse
Well you're lucky that actually works. It usually doesn't.
Are you sure it states permissive in settings after using SElinux changer?

ashyx said:
Well you're lucky that actually works. It usually doesn't.
Are you sure it states permissive in settings after using SElinux changer?
Click to expand...
Click to collapse
Yes I check it, now and again Google flags as dangerous but I keep it lol
Sent from my SM-A500FU

jimbomodder said:
Yes I check it, now and again Google flags as dangerous but I keep it lol
Sent from my SM-A500FU
Click to expand...
Click to collapse
Any chance I can see a screen shot of that as its unusual?

ashyx said:
Any chance I can see a screen shot of that as its unusual?
Click to expand...
Click to collapse
The dangerous part? It normal as ive allowed google to check for harmful apps and an app they changes the selinux is dangerous to google, ill get one soon as currently on RR
Sent From either S4, S4 mini, S5 neo, A500FU, T210, T230

jimbomodder said:
The dangerous part? It normal as ive allowed google to check for harmful apps and an app they changes the selinux is dangerous to google, ill get one soon as currently on RR
Sent From either S4, S4 mini, S5 neo, A500FU, T210, T230
Click to expand...
Click to collapse
Just the about page where it says permissive.

ashyx said:
Just the about page where it says permissive.
Click to expand...
Click to collapse
I'll get it later today:good:

ashyx said:
Just the about page where it says permissive.
Click to expand...
Click to collapse
Better late than never

Highly unusual, every single Samsung 5.1.1 kernel I have compiled always has the enforcing flag set in the configuration without the ability to override unless the kernel is custom.

ashyx said:
Highly unusual, every single Samsung 5.1.1 kernel I have compiled always has the enforcing flag set in the configuration without the ability to override unless the kernel is custom.
Click to expand...
Click to collapse
Well it's actually 5.0.2, I just changed it in build prop. I also deleted some of the security apks and no longer get a warning that it's permissive and need to reboot, also the smart manager says system is secure. Running viper4android just fine

Samsung On7 Hybrid 5.1.1

Samsung On7 Hybrid​
Features
¤ Deodexed.
¤ Zipaligned (better ram)
¤ Dolby atmos added.
¤ Download Booster.
¤ Explosion Kernel added.
Download Link
Remember, I'm not responsible for what you flash.
Latest link[G530F/H/M]: [url]https://drive.google.com/file/d/0B2fbJbmCWnIKR1ZWXzNKbEhkcmc/view?usp=sharing[/URL]
Camera Fix (Thanks to @KoSett): Coming soon.
ROM Installation process
1) Go to TWRP based recovery.
2) FULL WIPE is highly recommended!
3) Install the zip file from SDcard.
4) Swipe to Install.
5) Wait!
6) Reboot.
7) Hurry to Camera Settings and set from 9.6MP to 8.0MP
8) Flash the updated Camfix.zip (Thanks to @KoSett)
9) Thats it! Enjoy!!
Credits
Learnt a lot about porting roms from @KoSett
Explosion kernel Thanks @CarlosArriaga
XDA DevDB Information
Samsung On7 Hybrid , ROM for the Samsung Galaxy Grand Prime
Contributors
Eden532
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Galaxy Grand Prime
_____________________________________________
Version Information
Status: Stable
_____________________________________________
Created 2017-03-21
Last Updated 2017-04-20
_____________________________________________

Screenshots

This rom works with G530FZ?

HugoDEV said:
This rom works with G530FZ?
Click to expand...
Click to collapse
I have g530f, (sim doesnt work) If you can test it would be great? (But i build it for g530f) If it doesnt work, ill try to port it for g530fz, but right now i have my exams going on..
Can someone test for G530H too? (After i upload the rom)

@KoSett ,Please I need your help on fixing sim and Camera, Check the updated link- https://mega.nz/#!GUcVTJ7J!5UsCaxf4qqnPifv3ice_N4V30bgtlv9v6q4HCQsOirI , In This one i removed setup wizard and added su.d ..

OMG,,,, Young bro ....You are so good. keep it up your job.
I will help you ...I will check later.don't worry for that.
Tell me first ,You completely used my guide?

Thanks @KoSett
I installed Unbuntu, used kitchen and then i put some build.prop tweaks, Thats it! The guide really worked great for me!
And yeah i also had to replace wpa supplicant to fix "Cannot connect to network" error..

Eden532 said:
Thanks @KoSett
I installed Unbuntu, used kitchen and then, the guide for porting by you and then i put some build.prop tweaks, Thats it! The guide really worked great for me!
And yeah i also had to replace wpa supplicant to fix "Cannot connect to network" error..
Click to expand...
Click to collapse
zip archive not workk !!!!!!!!!!!!!

I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon

Is it working on 530H ?
Sent from my SM-G530H using XDA Labs

Sahin551 said:
Is it working on 530H ?
Sent from my SM-G530H using XDA Labs
Click to expand...
Click to collapse
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download

abooooood said:
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
Click to expand...
Click to collapse
Sorry I can't...
i don't have data pack too. I have wifi at home but
i'm not at home right now
I will test it just 5 days later
Sent from my SM-G530H using XDA Labs

abooooood said:
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
Click to expand...
Click to collapse
Ok so i downloaded the rom but sadly the zip is corrupt or has some error please fix this!?

asarre said:
zip archive not workk !!!!!!!!!!!!!
Click to expand...
Click to collapse
G530H? Was it corrupt or Status 7 error?

KoSett said:
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Click to expand...
Click to collapse
And internet works fine for me.
This is 5.1.1 itself..
The zip works right?
Build.prop tweaks from here
https://forum.xda-developers.com/grand-prime/general/lollipop-build-prop-tweaks-t3188026

Ill update the link, and verify its fine for flashing,
And ill do that @KoSett .. Can Expect it soon

Eden532 said:
Ill update the link, and verify its fine for flashing,
And ill do that @KoSett .. Can Expect it soon
Click to expand...
Click to collapse
It downloads fine but when i try to extract it , shows corrupt zip or file error and also in twrp it shows corrupt zip and im SM-G530H XXU

Ok ill fix it soon, im sorry guys!
Ill port the files from Nameless J5 for G530H, Sure guys! But cant figure out Sim fix ..
My net moves around 75kbps so, it may take time

Can someone upload G530H boot.img? Net too slow to download entire J5.. Please?

KoSett said:
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Click to expand...
Click to collapse
mmcameraqdaemon replaced cam still not working, now shows "Camera failed" and not "Mediaserver failed"
About SIM error..
It shows no service but the sim is detected i can see my sim's Carrier in the sim toolkit, And when i go to settings > mobile networks the "com.android.phone has stopped" message pops up force closing the settings app.

Testers needed for AOSP 7.1.2 Pixel themed ROM

Hi everyone,
I used to own a i9100 many years ago and was a developer back then, anyway it's good to see the phone is alive and kicking!
I built my own ROM which is clean aosp (untouched settings and most of base with only commits needed to build for non google devices) with pixel theme,
I want to test it but can't, I need 2 or 3 people who would want to test the alpha build and let me know if it works and send me screenshots,
again, this rom is clean aosp focused and performance, battery and getting that clean google pixel experience without the bloat some roms have, also I update it as soon as the security update comes out since there isn't many commits like other roms.
PM me please if your serious about testing.
Link to the main thread: Here

Well since no one has answered, ill just leave a link for testers here
Not responsible for any issues of course
Please comment with a screenshot and a detailed list of issues

sooti said:
Well since no one has answered, ill just leave a link for testers here
Not responsible for any issues of course
Please comment with a screenshot and a detailed list of issues
Click to expand...
Click to collapse
Nice to have you back as a developer and thank you for this rom.
pity at the moment i do not have a spare-device for testing.
but will have a go on it as soon as possible.
Sent from my ME173X using XDA-Developers Legacy app

sooti said:
Well since no one has answered, ill just leave a link for testers here
Not responsible for any issues of course
Please comment with a screenshot and a detailed list of issues
Click to expand...
Click to collapse
I downloaded rom tomorrow i will flash and i will report..

Flashed and rom works very well, is fast,smooth , just need permissive kernel to flash supersu systemmode to get root..

bujjo53 said:
Flashed and rom works very well, is fast,smooth , just need permissive kernel to flash supersu systemmode to get root..
Click to expand...
Click to collapse
Gotcha, what about ril?
EDIT: I did set the kernel to permissive.. root should work, try flashing magisk 13.0

sooti said:
Gotcha, what about ril?
EDIT: I did set the kernel to permissive.. root should work, try flashing magisk 13.0
Click to expand...
Click to collapse
Magisk not working on our device ?
---------- Post added at 12:08 PM ---------- Previous post was at 11:58 AM ----------
Can you upload build with permissive kernel , i will test root with supersu systemmode

bujjo53 said:
Magisk not working on our device ?
---------- Post added at 12:08 PM ---------- Previous post was at 11:58 AM ----------
Can you upload build with permissive kernel , i will test root with supersu systemmode
Click to expand...
Click to collapse
Kernel is set to permissive already , I checked

sooti said:
Kernel is set to permissive already , I checked
Click to expand...
Click to collapse
I flashed supersu systemmode but bootloop.

Tried to test your ROM. Downloaded it, did a clean wipe installed it after ][7.1.2_r17][OMS][i9100] XenonHD 7.1. Get sutck on install at step "patchjng", waiting at least 30mn then i get back to restore Xenon. Sorry guys.

islander999 said:
Tried to test your ROM. Downloaded it, did a clean wipe installed it after ][7.1.2_r17][OMS][i9100] XenonHD 7.1. Get sutck on install at step "patchjng", waiting at least 30mn then i get back to restore Xenon. Sorry guys.
Click to expand...
Click to collapse
I think your downloaded file is corrupted try download again .. Then flash

bujjo53 said:
I think your downloaded file is corrupted try download again .. Then flash
Click to expand...
Click to collapse
Noops cannot go back to recovery... Stuck there on logo or the only choice i see is to go to dowload mod but then ...?

I want to be a candidate @sooti! I sent a message to the private. Take a look

@sooti: well, after 12 hours of use, i noticed some things:
1. I can not install apps outside of google play even when I enable the Unknown sources option.
2. App notifications are always blank and you can not read what has been alerted.
3. Aesthetic: adjust the logo of initialization. gets too big.
4. Remove the installation of magisk when flashing, as it does not work on device and leave the system with the root already activated =)
5. 'MTP was stopped'. Whenever I open the files or connect the device to the notebook and disconnect the message persists.
6. Admin mode can not be enabled by other launchers.
7. Aesthetic: Adjust the size of the watch. Ex: When it is at 11:30 AM / PM, AM / PM goes from the screen.
8. Filming mode when clicking (+) on the instagram doesn't work, even with all the permissions enabled. The rest works very well.
9. Speech recognition does not work with 'ok google'. Using the Google assistant works fine. I even talk to her when I feel lonely. :rir:
10. Call recording not working same habiliting the permission.
11. The device was restarted 2 times on its own and ran out of the signal from the service provider. The signal only returned after the device restarts manually.
EDIT: 12: The phone only charges when it is switched on or in recovery mode (TWRP). If turned off, it turns on and enters the TWRP to load.
'Forgetting' these 12 problems, the rest works very well!
They will tell you that it is a lie, but the battery lasted 4 hours and 45 minutes using it intensely. Can you explain the magic to me, since with others, they last between 3 to 4 hours and 30 minutes? I'll send you pictures when use intensely again to prove it.
Link logcat to help: https://drive.google.com/open?id=0B1JkdXiGh6MhZmZhQzZEeGxhdkk (XDA limit 500kb per file)
Sorry for my bad english

YamrLite version for [T700/T800][Touchwiz] ( no root )

remove

Andoiiid said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Features:
- No themes
- No Smart manager, no appLock, no video player ( use VLC or MxPlayer )
- BuildProp tweaks ( battery life )
- All apks system and framework are in zero compression
- S8 icon for all apk system
- 1060 font
- Launcher modded look S8
- SystemUI look S8
- 4 way reboot menu
- Note Pro 12.2 Keyboard port ( Some colors changed )
Notes:
Fingerprint doesn't support here. Do not write, please, about it. If you need fingerprint support, use other roms.
Full wipe recommended.
Make a nandroid backup
Flash with TWRP 3.1.1.0
For root use magisk installer.
Links:
Link rom T800:
https://mega.nz/#!9EZzFAwJ!SyoOIWfH_WFBxtiPPndyQX5Hw71iufJbuWf41MOdKj0
Link rom T700:
Upload.. wait
Link Bootloader T800:
https://mega.nz/#!VB5UCQiT!ZGrZhGY_UdWnVGe9PTkN0jUGBbpoW93uKvFxJilt_i0
Link Keyboard Note Pro 12.2:
https://mega.nz/#!wAZHGLbZ!DjYNfAVpHhsNdVC9xw_SPaQYVPx_y2MvLlgHbcmcDQU
Click to expand...
Click to collapse
How about t700 your work seems so greate I would like to try

batsam said:
How about t700 your work seems so greate I would like to try
Click to expand...
Click to collapse
Uploading. About 2 hours remaining

Andoiiid said:
Uploading. About 2 hours remaining
Click to expand...
Click to collapse
Not working on the T700, when i try to install it says error incorrect device . Is asking for t800.

ifury512 said:
Not working on the T700, when i try to install it says error incorrect device . Is asking for t800.
Click to expand...
Click to collapse
Problem with the meta-inf. I'm creating a new zip.
Replaces the meta-inf file inside the zip with the one

Thanks mate
Does it work on T805 if I flash mm boot.img after flashing rom?

TacoNikky said:
Thanks mate
Does it work on T805 if I flash mm boot.img after flashing rom?
Click to expand...
Click to collapse
I don't know. Flash a stock rom T805 before
- Flash my rom and after reflash just a kernel and modem
Without being sure that it will work

Doesn't boot stays on Samsung splash screen

On T700 or T800

Andoiiid said:
On T700 or T800
Click to expand...
Click to collapse
T700

Andoiiid said:
On T700 or T800
Click to expand...
Click to collapse
Same here not working at all on T700, just stays on the Samsung screen.

ifury512 said:
Same here not working at all on T700, just stays on the Samsung screen.
Click to expand...
Click to collapse
Try to format internal sdcard or delete( android/data/delete all files with root explorer or other )
I have no T700 for test

Andoiiid said:
Try to format internal sdcard or delete( android/data/delete all files with root explorer or other )
I have no T700 for test
Click to expand...
Click to collapse
Try it as suggested and no luck, doesn't even go into the bootloader. I notice when is extracting the image and installing it, goes pretty fast compare to the Yamr original. Makes me think that is no even installing the image. I did check the system and internal Sdcard and it seems like nothing got installed. Hopefully this will help and Thx for the fast response.

Andoiiid why you delete the post?

How to install xposed beta-3 on 47.1.A.12.270!

The current firmware version is 47.1.A.12.270
Browse to this thread, made by machao44
Create an account and go to ROM下载地址 section, browse to the baidu link and download three files:
the 235 zip file (which is system firmware without the system partition), the xposed fix, and the m-rom.
Flash 235 with newflasher (150mb)
flash twrp
flash the rom through twrp, its 270 (1.5gb)
flash xposed
flash xposedfix
for g8141 users:
go to m-rom system/build.prop, open it with notepad++, replace ctrl-h all things maple-dsds with maple and all g8142 to g8141, save it and copy it back to the rom before flashing.
flash janjan kernel 270 only, no need zip 2~4 it only slows down performance, and then flash supersu after kernel
done!

-flashed full 270
-installed JanJan's .270 GLOBAL kernel and twrp via adb (!!!!) before even booting first
-booted into twrp
-flashed: the FW itself (aroma installer), Xposed (90v3), Gapps (i need'em), debloater, Xposed Fix
-started. Took ~5 minutes for the first start
- FINE

Is this some sort of joke? I cannot download the larger files without the Baidu app (Windows PC) and I cannot read Mandarin/Cantonese so cannot create an account to use it.
I appreciate your efforts, but can you not provide the files here or on some other host where we can get them from?

Mobfigurz said:
Is this some sort of joke?
Click to expand...
Click to collapse
LOL. I have a Chinese Girlfriend. She helped me with the Baidu. That's how you do it... LOL.
But, lol, you should've just looked around for longer.
Here you go:
-google: firmware, xposed-fix
-yandex: firmware

saved-j said:
LOL. I have a Chinese Girlfriend. She helped me with the Baidu. That's how you do it... LOL.
But, lol, you should've just looked around for longer.
Here you go:
-google: firmware, xposed-fix
-yandex: firmware
Click to expand...
Click to collapse
Lucky man and thank you for providing the links, very much appreciated.
Quick question, I know this is stated for. 270 but would this work for. 235?

Mobfigurz said:
Is this some sort of joke? I cannot download the larger files without the Baidu app (Windows PC) and I cannot read Mandarin/Cantonese so cannot create an account to use it.
I appreciate your efforts, but can you not provide the files here or on some other host where we can get them from?
Click to expand...
Click to collapse
The owner asked not to share it so thats why
https://www.coolapk.com/apk/com.baidu.netdisk if you use this you can get it on android and it has download manager built in

Mobfigurz said:
Lucky man and thank you for providing the links, very much appreciated.
Quick question, I know this is stated for. 270 but would this work for. 235?
Click to expand...
Click to collapse
If you have firmware and flash 270 m rom on it it works fine

saved-j said:
-flashed full 270
-installed JanJan's .270 GLOBAL kernel and twrp via adb (!!!!) before even booting first
-booted into twrp
-flashed: the FW itself (aroma installer), Xposed (90v3), Gapps (i need'em), debloater, Xposed Fix
-started. Took ~5 minutes for the first start
- FINE
Click to expand...
Click to collapse
Youre doing it wrong, the fw has kernel in it so you have to flash janjan afterwards
And full 270 sony ofw isnt needed, he has uploaded 115mb 235 firmware to flash with newflasher

amakuramio said:
Youre doing it wrong, the fw has kernel in it so you have to flash janjan afterwards
And full 270 sony ofw isnt needed, he has uploaded 115mb 235 firmware to flash with newflasher
Click to expand...
Click to collapse
actually i'm having some sort of stupid issue, and I can't figure out what is it related to.
i've tried 3 times, and the first time there was some process named "cta_server" from (as far as i remember) /vendor/bin, and it had a trouble computing something, so it would not let the phone into the deep sleep, and it kept the phone hot and drained the battery.
Second time, my contacts won't sync to Google!!!
I've made a backup, and tried for the third time. And it still won't work as it should.
Now, I'm looking for a way to deodex the firmware by myself, and i'm gonna make my f-ing own fw based on this xposed hack!!!
you're welcome to help, or advice...

saved-j said:
actually i'm having some sort of stupid issue, and I can't figure out what is it related to.
i've tried 3 times, and the first time there was some process named "cta_server" from (as far as i remember) /vendor/bin, and it had a trouble computing something, so it would not let the phone into the deep sleep, and it kept the phone hot and drained the battery.
Second time, my contacts won't sync to Google!!!
I've made a backup, and tried for the third time. And it still won't work as it should.
Now, I'm looking for a way to deodex the firmware by myself, and i'm gonna make my f-ing own fw based on this xposed hack!!!
you're welcome to help, or advice...
Click to expand...
Click to collapse
Tell me exactly what you did

amakuramio said:
Tell me exactly what you did
Click to expand...
Click to collapse
well step by step
1. flashed .270 full european
-i've replaced the boot.img in the firmware with JanJans-
2. pushed janjans 270 and aroma-supporting twrp via adb
3. entered twrp, installed the fw, NO REBOOT
4. installed gapps, xposed_systemless_beta3, kernel_permissive, xposed_fix
5. booted up. normally.
set everything up... then either contacts don't sync, either CTA_server gets crazy and heats up the phone.
i wanna deodex the fw and make my own fw anyway. Do you know how to deodex Oreo? I haven't done that since KitKat...

saved-j said:
well step by step
1. flashed .270 full european
-i've replaced the boot.img in the firmware with JanJans-
2. pushed janjans 270 and aroma-supporting twrp via adb
3. entered twrp, installed the fw, NO REBOOT
4. installed gapps, xposed_systemless_beta3, kernel_permissive, xposed_fix
5. booted up. normally.
set everything up... then either contacts don't sync, either CTA_server gets crazy and heats up the phone.
i wanna deodex the fw and make my own fw anyway. Do you know how to deodex Oreo? I haven't done that since KitKat...
Click to expand...
Click to collapse
Completely wrong. In his baidu there is a 235 stock firmware. Flash that one first its only 115 mb. Flash it with newflasher combined in it. Then flash twrp. Then flash the 270 custom rom. Then flash kernel from janjan. Then flash patching zip from janjan then supersu from custom rom package in custom rom by unpacking it then only the supersu zip. Then xposed fix and xposed from rovo89, not the weird one you liked me. Done. If you have g8141 then you also Edit build prop. Make sure its clean flash.

Mobfigurz said:
Is this some sort of joke? I cannot download the larger files without the Baidu app (Windows PC) and I cannot read Mandarin/Cantonese so cannot create an account to use it.
I appreciate your efforts, but can you not provide the files here or on some other host where we can get them from?
Click to expand...
Click to collapse
SONY_XPERIAO_XZP_1.6.1_2
Rom link：https://drive.google.com/file/d/1vxbvHftCxJXXeJfTvlA2LLs75Yn9AHLi/view
Xposed fix for m-rom 1.61
Xposed link：
https://drive.google.com/file/d/12jJ-fAMBouya3pYWcvXCJJa6pDqTm1bw/view

jianlin3062 said:
SONY_XPERIAO_XZP_1.6.1_2
Rom link：https://drive.google.com/file/d/1vxbvHftCxJXXeJfTvlA2LLs75Yn9AHLi/view
Xposed fix for m-rom 1.61
Xposed link：
https://drive.google.com/file/d/12jJ-fAMBouya3pYWcvXCJJa6pDqTm1bw/view
Click to expand...
Click to collapse
Than you very much, I appreciate your help.
There is one more file I need, which I cannot download, the ZXP 235 ROM which has a size of 150MB (•Flash 235 with newflasher (150mb)) Any help getting that would be appreciated.

I've tweaked and translated into English the installer.
I will upload the updated package somewhere soon.
Or maybe I'll make a separate ROM thread instead.

saved-j said:
I've tweaked and translated into English the installer.
I will upload the updated package somewhere soon.
Or maybe I'll make a separate ROM thread instead.
Click to expand...
Click to collapse
The roms easily available anyway, if you install a script in chrome on pc its downloadable directly from BBS dot gfan/pan baidu, google is everyones friend. The translated aroma package will be greatly appreciated.

Beetle84 said:
The roms easily available anyway, if you install a script in chrome on pc its downloadable directly from BBS dot gfan/pan baidu, google is everyones friend. The translated aroma package will be greatly appreciated.
Click to expand...
Click to collapse
Not so easy, the script for Chrome has been deleted and I am still missing one files, the 235 ROM file which is 150MB.

Mobfigurz said:
Not so easy, the script for Chrome has been deleted and I am still missing one files, the 235 ROM file which is 150MB.
Click to expand...
Click to collapse
you can install this ROM on top of any other 235 or 270. That one is just minimum necessary
---------- Post added at 04:35 PM ---------- Previous post was at 04:31 PM ----------
amakuramio said:
Completely wrong.
Click to expand...
Click to collapse
thank you very much. i'm uploading a tweaked and fixed version of this rom
https://drive.google.com/open?id=1_Tm7V7rHOxl0f8s0oQ4uTjmajt-7U7dT
check here. it's being uploaded so it's not yet there right now

saved-j said:
you can install this ROM on top of any other 235 or 270. That one is just minimum necessary
---------- Post added at 04:35 PM ---------- Previous post was at 04:31 PM ----------
thank you very much. i'm uploading a tweaked and fixed version of this rom
https://drive.google.com/open?id=1_Tm7V7rHOxl0f8s0oQ4uTjmajt-7U7dT
check here. it's being uploaded so it's not yet there right now
Click to expand...
Click to collapse
Appreciate the response. Ideally, I want to stay on 235 because I have WiFi calling with my network provider firmware, if I go through this process, I assume I will lose that as the .235 will not be the exact one I have installed, is that correct?
If so, I will sacrifice WiFi calling for Xposed, much rather have Xposed.

Mobfigurz said:
Appreciate the response. Ideally, I want to stay on 235 because I have WiFi calling with my network provider firmware, if I go through this process, I assume I will lose that as the .235 will not be the exact one I have installed, is that correct?
If so, I will sacrifice WiFi calling for Xposed, much rather have Xposed.
Click to expand...
Click to collapse
you might backup the VoLTE IMS profiles and check
system\etc\customization\modem
also check this out
https://forum.xda-developers.com/xp.../guide-enable-volte-operator-handset-t3816565
go on fella
---------- Post added at 05:16 PM ---------- Previous post was at 05:13 PM ----------
Uploaded!
https://drive.google.com/drive/folders/1_Tm7V7rHOxl0f8s0oQ4uTjmajt-7U7dT?usp=sharing