Related
UPDATE: WOLF HAS RELEASED TW 007.2 THAT INCLUDES THE zKernel.
Thanks to that, the process is much more simpler now. Just flash the files as it says in the Wolf thread.
Mods, please close this. Thanks to all who used this and hopefully this helped you in 007.1
hey thanks for posting this...
i will link up to this from the kernel thread...
btw u should also mention this:
>>
if u have previously used the wifi patch wifi_bt_fix-fxk_froyo_v01.1.zip please remove it using remove_fix_v01.1.zip and try using this test kernel
<<
will do..can i plz have a link to the remove_fix_01.1.zip? Thanks
kantk20111 said:
will do..can i plz have a link to the remove_fix_01.1.zip? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1077437
Thanks...guide is updated
3.Go to settings-About phone. If, under kernel version, it says anything other than "2.6.29-zKernel-23062011 [email protected]#1", then you will have to do this.
Navigate to system/kernel using root explorer or similar app. DELETE boot.froyo.img, and RENAME boot.img to boot.froyo.img. Restart.
If it shows that kernel version, then skip this step.
Click to expand...
Click to collapse
Thanks a lot for this awesome guide. Im sure it will be very helpful to many users.
I followed ur guide to install custom kernel on WB TW007 with baseband .67.
But Im stuck on step 3. After flashing boot.img in Xrec I couldnt see custom kernel version in About Phone so I navigated to system/kernel using root explorer. There was only just one file named boot.img. So I renamed it to boot.froyo.img, rebooted but still get the stock kernel version in About Phone
Any kind of help will be greatly appreciated
digital_ism said:
Thanks a lot for this awesome guide. Im sure it will be very helpful to many users.
I followed ur guide to install custom kernel on WB TW007 with baseband .67.
But Im stuck on step 3. After flashing boot.img in Xrec I couldnt see custom kernel version in About Phone so I navigated to system/kernel using root explorer. There was only just one file named boot.img. So I renamed it to boot.froyo.img, rebooted but still get the stock kernel version in About Phone
Any kind of help will be greatly appreciated
Click to expand...
Click to collapse
hmm...I'm assuming that you have Stock kernel, right?
First, try re-flashing the boot.img file, but first wipe cache partition and wipe dalvik cache, then do the whole replacement an renaming. If that doesn't work, then try this:
(Thanks Haldi4803)
3. Restart Phone and enter X Recovery: Install first: "chargemon_FXRec_default_CUSTOM.zip" and then "bootloader_bypass_files_v2.zip"
Then, install the kernel on top of that while still in xRecovery. So, you would have installed all 3 files together . Please report back if it works so I can add this step in the OP.
^ Yes! Im on stock kernel. Sorry for not being clear.
Aiight. Im trying what u said right now and will report back.
EDIT: Nope. Nothing worked. Flashing all 3 files didnt work. On the other hand phone started lagging like hell after flashing. Its not responsive at all and Im constantly getting FC on System Process etc
Any thing else??
Hi everyone, dude, I tried follow u tutorial, but this didn't work (ok ok, I'm noob, i tried start this with Stock kernel...). Then I installed TW007.1 with Custom Kernel and didn't appears Custom kernel.. ok, i tried to install Z's custom kernel, following u tutorial and nothing again
What should I do?????
digital_ism said:
^ Yes! Im on stock kernel. Sorry for not being clear.
Aiight. Im trying what u said right now and will report back.
EDIT: Nope. Nothing worked. Flashing all 3 files didnt work. On the other hand phone started lagging like hell after flashing. Its not responsive at all and Im constantly getting FC on System Process etc
Any thing else??
Click to expand...
Click to collapse
u were most probably using xRecovery... flash FreeXperia recovery using FLASHTOOL and then try those files...
BTW if u use "chargemon_FXRec_default_CUSTOM.zip" then u dont need to do any renaming cause that files uses standard boot.img file name
cat /system/kernel/boot.img > /proc/splboot/boot_img
^ For some reason my Xrec is broken and I cant get into Xrec so I tried to install Rec thru Flashtool. It isnt working either
Insall Recovery option is disabled. I click on Ask Permissions, it says allow Superuseraccess on the phone but nothing happens on the phone. I cant do anything on the phone as it keeps FC Process System. It sometimes even doesnt detect USB conncetion
Is the SEUS repair the only option???
digital_ism said:
^ For some reason my Xrec is broken and I cant get into Xrec so I tried to install Rec thru Flashtool. It isnt working either
Insall Recovery option is disabled. I click on Ask Permissions, it says allow Superuseraccess on the phone but nothing happens on the phone. I cant do anything on the phone as it keeps FC Process System. It sometimes even doesnt detect USB conncetion
Is the SEUS repair the only option???
Click to expand...
Click to collapse
sadly, yes. I'm sorry about your phone, I wasn't sure if it would work with the stock kernel. another option could be to install the 3. 52 kernel first before following my instructions, or wait for wolf to officially release a kernel.
again, sorry about causing you to do a full repair
Na u dont need to be sorry. U were trying to help. I might've done something wrong or it was a bad day for me after all. Im repairing thru SEUS right now. Might give it another try in a day or two if WB doesnt officially release a Zkernel supported version of his rom.
But thanks once again for everything and keep up the good work
To those on the stock kernel,
Try to install the 3.51 kernel first, found here, then follow my instructions.
You won't get signal after installing the 3.51 kernel but that's ok, since it's meant for BB52 anyway. Your BB might become unknown as well.
That's what I do on a fresh install
Get baseband .67 first then
1) Fresh install TW007 stock kernel
2) Reboot and check for signal
2) Flash 007.1 update
3) Reboot
4) Flash transparent add-on (Optional)
5) Reboot
6) Flash zKernel_22062011.zip
9) Reboot and you will have the custom kernel but system keep on crashing and no signal
10) So I just reboot and flash this two files by DoomLord
Download link: (boot.img only)
http://www.mediafire.com/?vj9p2xy4p4w24ay
[VIMP NOTE FOR FROYO USERS who do not see any change in custom kernel after flashing the boot.img]
Download link: (wifi.ko module only)
http://www.mediafire.com/?lmh46quh490mzme
VERIFIED WIFI WORKS!
11) Signal is back and system doesn't crash
12) Reboot
13) Flash Contacts_ProSE _FIXED.zip & fb.zip
Thanks to them.
Everything is working. Use cpu master to overclock, it sometime give WLOD though
@gohwh1
u have linked to slightly older files...
i have posted updated kernel 23062011 based on FreeX10 ramdisk... which should work without any issue...
DooMLoRD said:
@gohwh1
u have linked to slightly older files...
i have posted updated kernel 23062011 based on FreeX10 ramdisk... which should work without any issue...
Click to expand...
Click to collapse
If that's working for me, I don't have to change right? Only problem is when overclocking to 1113mhz and playing games, it will WLOD when it's get too hot. Playing games for 3hrs non-stop and only one WLOD is normal right?
The updated kernel will not fix that right?
gohwh1 said:
If that's working for me, I don't have to change right? Only problem is when overclocking to 1113mhz and playing games, it will WLOD when it's get too hot. Playing games for 3hrs non-stop and only one WLOD is normal right?
The updated kernel will not fix that right?
Click to expand...
Click to collapse
thats wht it might!
please do try!
DooMLoRD said:
thats wht it might!
please do try!
Click to expand...
Click to collapse
Is it zKernel_freeX10_aZuZu_23062011.zip?
So I just have to flash it over current? Will flash it tommorrow, it's almost 3am here.
gohwh1 said:
Is it zKernel_freeX10_aZuZu_23062011.zip?
So I just have to flash it over current? Will flash it tommorrow, it's almost 3am here.
Click to expand...
Click to collapse
no this one:
zKernel_23062011 with FreeX10-beta4 ramdisk
http://forum.xda-developers.com/showthread.php?p=15170924#post15170924
Right so I have tried out with different ways of installing xposed on my device,
and this is what I found out that works That I want to share with you guys.
Note: All these is not my work, I just wanted to show you guys a way to install it
Warning : Make sure you have unlock your bootloader, and rooted your device or else it won't work for you!
Also if you have any problem, don't blame me, because you chose to make the decision to modify your device!
Installation:
1) First of all, Install a few apps: "Xposed installer" "Flashfire" (What I use for flashing the .zip files, because we don't have custom recovery for dual sim users yet)
2) Go to this official xposed link to download the "xposed-v79-sdk21-arm64.zip" file
Link: http://forum.xda-developers.com/showthread.php?t=3034811
Note: If you are using Snapchat, remember to login your account first, or else you won't able to login your account after flashing Xposed.
3) Open "Flashfire", Press the + button on the right bottom corner, choose the xposed.zip file you just downloaded. (Don't tick the Auto-mount box)
4) Important!!! Wipe Dalvik cache and Cache partition for good measure.
5) Wait for your device to finish the job to boot in to the system again, sometimes it will cause a once or twice bootloop, but it will boot into the system eventually.
6) After installing Xposed, you will find out that the Camera App stops working, or Force Close.
7) To fix the issue, all you have to do is to deodex the Sony camera app, which you can find out in this post.
Link: http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
After you deodex your camera app. If you don't know how to put it into your phone with adb, you can just put it on to your sdcard, used rootexplorer or other file manager that supports root actions, copy the file into system/priv-app/cameracommon/ and then reboot your phone
8) If your camera app is not updated, you can go to this link and download the new version.
Link: http://www.xperiablog.net/2015/11/16/new-sony-camera-app-with-refreshed-ui-rolling-for-xperia-z5-series/
9) After you fix everything, you can download all the xposed apps and play around with them :good:
Boot.img if needed:
1) Extract the .rar file
2) Click boot on the "Partition to flash"
3) Open 123.exe and choose boot.img
4) Put your phone into fastboot mode (make sure you device it is connected)
5) Just flash and when you see it is done unplug and thats it
Link: http://www.mediafire.com/download/qwpoib6hop2nl3c/z3%2B+boot.rar
Tip: I don't recommend updating the supersu.apk just stick with what version you got
Extra Audio files if needed:
Link for Dolby Atom app: http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Viper4Android also works for me, so if you are a big fan of V4A please download and install it on to your device
Link: http://forum.xda-developers.com/showthread.php?t=2191223
(Remember to download SeLinux on to your phone, or else the Audio Apps won't work!)
Xposed Apps that I have already tested working::highfive:
Greenify
Bright Lockscreen
Fix Lollipop Memory Leak
Flat style Bar Indicators
Gesture Navigation
GravityBox (Some functions doesn't work)
Lucky Patcher
MinMinGuard
PerfectColourBar
RootCloak
Snapprefs
Xstana
Youtube Adaway
Wechange (Wechat Mod)
Xprivacy
Special thanks to theribs121( for the camera app), AndroPlus (for the Camera Fix), worstenbrood (for the Dolby atom app), zhuhang (Viper4android) and rovo89 (for the xposed installer and .zip file)
If you like my post please leave a thumbs up, but don't forget all this is not my work :fingers-crossed:
If you guys have any question feel free to ask me on this post, I will answer what I know
Good Luck Flashing Your Xposed
ScreenShots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my dual sim E6533 restarts randomly,overheats alot,and after it restarts the red led blinks 3 times.... please help.
Michael_1020 said:
Right so I have tried out with different ways of installing xposed on my device,
and this is what I found out that works That I want to share with you guys.
Note: All these is not my work, I just wanted to show you guys a way to install it
Warning : Make sure you have unlock your bootloader, and rooted your device or else it won't work for you!
Also if you have any problem, don't blame me, because you chose to make the decision to modify your device!
Installation:
1) First of all, Install a few apps: "Xposed installer" "Flashfire" (What I use for flashing the .zip files, because we don't have custom recovery for dual sim users yet)
2) Go to this official xposed link to download the "xposed-v79-sdk21-arm64.zip" file
Link: http://forum.xda-developers.com/showthread.php?t=3034811
Note: If you are using Snapchat, remember to login your account first, or else you won't able to login your account after flashing Xposed.
3) Open "Flashfire", Press the + button on the right bottom corner, choose the xposed.zip file you just downloaded. (Don't tick the Auto-mount box)
4) Important!!! Wipe Dalvik cache and Cache partition for good measure.
5) Wait for your device to finish the job to boot in to the system again, sometimes it will cause a once or twice bootloop, but it will boot into the system eventually.
6) After installing Xposed, you will find out that the Camera App stops working, or Force Close.
7) To fix the issue, all you have to do is to deodex the Sony camera app, which you can find out in this post.
Link: http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
After you deodex your camera app. If you don't know how to put it into your phone with adb, you can just put it on to your sdcard, used rootexplorer or other file manager that supports root actions, copy the file into system/priv-app/cameracommon/ and then reboot your phone
8) If your camera app is not updated, you can go to this link and download the new version.
Link: http://www.xperiablog.net/2015/11/16/new-sony-camera-app-with-refreshed-ui-rolling-for-xperia-z5-series/
9) After you fix everything, you can download all the xposed apps and play around with them :good:
Xposed Apps that I have already tested working::highfive:
Greenify
Bright Lockscreen
Fix Lollipop Memory Leak
Flat style Bar Indicators
Gesture Navigation
GravityBox (Some functions doesn't work)
Lucky Patcher
MinMinGuard
PerfectColourBar
RootCloak
Snapprefs
Xstana
Youtube Adaway
Wechange (Wechat Mod)
Xprivacy
Special thanks to theribs121( for the camera app), AndroPlus (for the Camera Fix) and rovo89 (for the xposed installer and .zip file)
If you like my post please leave a thumbs up, but don't forget all this is not my work :fingers-crossed:
If you guys have any question feel free to ask me on this post, I will answer what I know
Good Luck Flashing Your Xposed
Click to expand...
Click to collapse
Would like to test this on my e6533 dual, but stuck with unlocked bootloader on 266 firmware. Any good tutorial how to downgrade to 251 and root, or any new root method for 266?
Very big Thank you for any help.
hussian said:
my dual sim E6533 restarts randomly,overheats alot,and after it restarts the red led blinks 3 times.... please help.
Click to expand...
Click to collapse
What version firmware are you using?
septera said:
Would like to test this on my e6533 dual, but stuck with unlocked bootloader on 266 firmware. Any good tutorial how to downgrade to 251 and root, or any new root method for 266?
Very big Thank you for any help.
Click to expand...
Click to collapse
What do you mean you stuck on the unlock bootloader? And also I am using the 28.A.8.266 at the moment, nothing seems to be wrong, I just basically unlock my bootloader and flash the boot.img to root my phone :highfive:
Michael_1020 said:
What do you mean you stuck on the unlock bootloader? And also I am using the 28.A.8.266 at the moment, nothing seems to be wrong, I just basically unlock my bootloader and flash the boot.img to root my phone :highfive:
Click to expand...
Click to collapse
Ok great news I already unlocked my bootloader. I know how to flash boot.img. (using adb...) Just searching a proper one(working) on z3+ e6533 dual 28.A.8.266 firmware.
Can you mention the link where I can get the right boot.img for my phone?
May be a recovery.img too? So I can backup and restore when needed?
septera said:
Ok great news I already unlocked my bootloader. I know how to flash boot.img. (using adb...) Just searching a proper one(working) on z3+ e6533 dual 28.A.8.266 firmware.
Can you mention the link where I can get the right boot.img for my phone?
May be a recovery.img too? So I can backup and restore when needed?
Click to expand...
Click to collapse
well I will upload mine to the website, I will add a link for you when it is uploaded
Forgot to say that unfortunately there still isn't a recovery for dual sim users yet
we will just have to wait, if you are scared of anything losing on your phone, once it is rooted, use titanium backup to backup everything first
Michael_1020 said:
well I will upload mine to the website, I will add a link for you when it is uploaded
Forgot to say that unfortunately there still isn't a recovery for dual sim users yet
we will just have to wait, if you are scared of anything losing on your phone, once it is rooted, use titanium backup to backup everything first
Click to expand...
Click to collapse
Thanks, I have all synced on google. Can wipe the device, no problem.
By the way how is your device? How long are you using it? Does it overheat? Mine become amazingly hot when I'm using Skype(specially Video call). Is it ok, or can be some kernel tweaks done to control this?
Best Regards
Ivan
septera said:
Thanks, I have all synced on google. Can wipe the device, no problem.
By the way how is your device? How long are you using it? Does it overheat? Mine become amazingly hot when I'm using Skype(specially Video call). Is it ok, or can be some kernel tweaks done to control this?
Best Regards
Ivan
Click to expand...
Click to collapse
Files are uploaded on the first page, well it is my regular used phone, I use it everyday, I don't really get much of a problem while I use it
Michael_1020 said:
Files are uploaded on the first page, well it is my regular used phone, I use it everyday, I don't really get much of a problem while I use it
Click to expand...
Click to collapse
Ok, got it will test it tonight and will report here with the results.
Thank you:angel:
septera said:
Ok, got it will test it tonight and will report here with the results.
Thank you:angel:
Click to expand...
Click to collapse
Okay, please do I want to see if it works for everyone as well, also if you love listening to music, make sure you install a Viper4Android, I uploaded on the first page as well
Michael_1020 said:
Okay, please do I want to see if it works for everyone as well, also if you love listening to music, make sure you install a Viper4Android, I uploaded on the first page as well
Click to expand...
Click to collapse
Ok, will do it too
---------- Post added at 03:46 PM ---------- Previous post was at 03:19 PM ----------
By the way may be is better to install the newer xposed version: xposed-v79-sdk23-arm64 instead of xposed-v79-sdk21-arm64 ?
Can my original boot.img be backuped with adb or fastboot? If im right it is available to do only after root?
septera said:
Ok, will do it too
---------- Post added at 03:46 PM ---------- Previous post was at 03:19 PM ----------
By the way may be is better to install the newer xposed version: xposed-v79-sdk23-arm64 instead of xposed-v79-sdk21-arm64 ?
Can my original boot.img be backuped with adb or fastboot? If im right it is available to do only after root?
Click to expand...
Click to collapse
sdk23 means Android 6.0
So xposed-v79-sdk23-arm64 doesn't mean newer than xposed-v79-sdk21-arm64
For our Z3+ currently, it has only Android 5.0.2, so we should use sdk21(Android 5.0) instead
Sent from my E6553 using Tapatalk
septera said:
Ok, will do it too
---------- Post added at 03:46 PM ---------- Previous post was at 03:19 PM ----------
By the way may be is better to install the newer xposed version: xposed-v79-sdk23-arm64 instead of xposed-v79-sdk21-arm64 ?
Can my original boot.img be backuped with adb or fastboot? If im right it is available to do only after root?
Click to expand...
Click to collapse
well you dont really have to backup your original one, mainly because if anything goes wrong, you will have to flash the system.sin or the whole tft file again :/
Ok so the first results:
Got a root after flashing boot.img.
Installed all software needed and flashed xposed (putted ticks only on wipe cache/ dalvik cache)
After application optimization message phone rebooted. Got red light blink (3-4 times) and already stuck on a loading screen(blue background and moving lines) for more than 10 minutes.
Done switch off by holding power + volume up.
Phone booted after
Camera was not updated and not working. Downloaded and installed 2.0 apk. Works, but standart features like: "Style portrait, AR mask, Face in picture, Sound photo" not working
In Xposed installer says: Xposed not compatible with Android SDK version 21 or your processor architecture (arm64-v8a).
Cant run any xposeed modules...
septera said:
Ok so the first results:
Got a root after flashing boot.img.
Installed all software needed and flashed xposed (putted ticks only on wipe cache/ dalvik cache)
After application optimization message phone rebooted. Got red light blink (3-4 times) and already stuck on a loading screen(blue background and moving lines) for more than 10 minutes.
Done switch off by holding power + volume up.
Phone booted after
Camera was not updated and not working. Downloaded and installed 2.0 apk. Works, but standart features like: "Style portrait, AR mask, Face in picture, Sound photo" not working
In Xposed installer says: Xposed not compatible with Android SDK version 21 or your processor architecture (arm64-v8a).
Cant run any xposeed modules...
Click to expand...
Click to collapse
Well I think you must have done something wrong here, maybe yoy should start all over again, what country firmware are you using? I am using the hk version 266, maybe download the hk ftf file and flash it with flashtool first and start again, also it should work on the xposed as well because I have loop the steps like 10 times in my phone, and everytime xposed is installed on my device, maybe give it a try again, if there is any problem again fell free to ask
Michael_1020 said:
Well I think you must have done something wrong here, maybe yoy should start all over again, what country firmware are you using? I am using the hk version 266, maybe download the hk ftf file and flash it with flashtool first and start again, also it should work on the xposed as well because I have loop the steps like 10 times in my phone, and everytime xposed is installed on my device, maybe give it a try again, if there is any problem again fell free to ask
Click to expand...
Click to collapse
Thanks. I'm using United Kingdom firmware. Will try installing xposed with FlashFire again on the current firmware, but will select in addition to wipe System data and 3rd party apps... Because last time I selected only to wipe Dalvik + cache partition.
If no success this time then will try other firmware with flashtool.
Will reply later with the results
septera said:
Thanks. I'm using United Kingdom firmware. Will try installing xposed with FlashFire again on the current firmware, but will select in addition to wipe System data and 3rd party apps... Because last time I selected only to wipe Dalvik + cache partition.
If no success this time then will try other firmware with flashtool.
Will reply later with the results
Click to expand...
Click to collapse
Okay, hope you with good luck and fingers cross :fingers-crossed::fingers-crossed::fingers-crossed:
Michael_1020 said:
Okay, hope you with good luck and fingers cross :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
After a loong boot (about 15 min) the wizzard is oppened(language, account, wifi...) I was unable to enable wifi. All apps erased. Eventually I done a factory reset. Now waiting while it finishes. Lets hope WIFI will work again.
Seems cleaning system apps data was not a good idea. I lost my wifi function... Tried uninstall and then install xposed. Same effect-> not supported.
So may be it worth a try to install the new 272 firmware? Will it help recover the wifi? Can I flash firmware straight away from the phone external storage?
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?
I have a rooted samsung galaxy sm-531f but there isn't any single rom for this device the selinux and frp are just a headaches pls can anyone build a custom rom for this device
For frp lock take a look at my guide (it work for all android devices), i use'd (SM-531F phone).
and it only need root, 2 apps, brain.
Before doing in guide download and install DisableService (frp disable) and QuickShortcutMaker for adding google account.
TheSMGCraft said:
For frp lock take a look at my guide (it work for all android devices), i use'd (SM-531F phone).
and it only need root, 2 apps, brain.
Before doing in guide download and install DisableService (frp disable) and QuickShortcutMaker for adding google account.
Click to expand...
Click to collapse
But what about custom rom can you suggest how to install an sm-531h rom on sm-531f bcz I don't think there is any custom rom available specific for sm-531f
Sushant515 said:
But what about custom rom can you suggest how to install an sm-531h rom on sm-531f bcz I don't think there is any custom rom available specific for sm-531f
Click to expand...
Click to collapse
Hello i love to help you. I Created custom kernel for SM-G531F
read description before flashing my custom kernel
Selinux Permissive AND
Glitched Init.d Support
/SYS Access
Get it here
http://forum.xda-developers.com/gra...ogress-samsung-galaxy-grand-prime-sm-t3506378
TheSMGCraft said:
Hello i love to help you. I Created custom kernel for SM-G531F
read description before flashing my custom kernel
Selinux Permissive AND
Glitched Init.d Support
/SYS Access
Get it here
http://forum.xda-developers.com/gra...ogress-samsung-galaxy-grand-prime-sm-t3506378
Click to expand...
Click to collapse
I have tried it just install but have no effect on oh one as if I haven't flashed anything
Sushant515 said:
But what about custom rom can you suggest how to install an sm-531h rom on sm-531f bcz I don't think there is any custom rom available specific for sm-531f
Click to expand...
Click to collapse
You cannot flash sm-g531h rom on SM-G531F
they have different codes and SM-G531F need Encrypt Key
Other Phone's don't need it encrypt key
Sushant515 said:
I have tried it just install but have no effect on oh one as if I haven't flashed anything
Click to expand...
Click to collapse
Can you tell me whether we can install sm-531h rom on sm-531f as they have same specs
Sushant515 said:
Can you tell me whether we can install sm-531h rom on sm-531f as they have same specs
Click to expand...
Click to collapse
And can you provide a link for removing fpr lock
Sushant515 said:
I have tried it just install but have no effect on oh one as if I haven't flashed anything
Click to expand...
Click to collapse
Install Kernel Guide (if you don't know)
Download Kernel (Boot.tar.md5)
Download Odin
Download Samsung USB Drivers
Bootup Phone in download mode by pressing VOL DOWN + HOME + POWER and if something show press VOL UP
Connect Phone to PC After You Bootup phone in downloadmode
Open Odin
Press "AP" Button then select Boot.tar.md5 where you placed it on your disk
Press Start, it will flash your kernel.
If you have frp lock you need to follow my guide or live without google account
Then After Phone Bootup and you still have enforcing it's simple to change it
Download Terminal Emulator or 1 Tap Permissive (Selinux Mode Changer) app
In terminal emulator write "setenforce 0" you need busybox.
Check settings and selinux should be now permissive
it's already made change's to your phone if you flashed it
You after it have:
Glitchy Init.d Support
Ability to change selinux between permissive/enforcing
and more
TheSMGCraft said:
Install Kernel Guide (if you don't know)
Download Kernel (Boot.tar.md5)
Download Odin
Download Samsung USB Drivers
Bootup Phone in download mode by pressing VOL DOWN + HOME + POWER and if something show press VOL UP
Connect Phone to PC After You Bootup phone in downloadmode
Open Odin
Press "AP" Button then select Boot.tar.md5 where you placed it on your disk
Press Start, it will flash your kernel.
If you have frp lock you need to follow my guide or live without google account
Then After Phone Bootup and you still have enforcing it's simple to change it
Download Terminal Emulator or 1 Tap Permissive (Selinux Mode Changer) app
In terminal emulator write "setenforce 0" you need busybox.
Check settings and selinux should be now permissive
it's already made change's to your phone if you flashed it
You after it have:
Glitchy Init.d Support
Ability to change selinux between permissive/enforcing
and more
Click to expand...
Click to collapse
Thanks for support and I was also keen to know can you make a custom rom for this device
Sushant515 said:
Can you tell me whether we can install sm-531h rom on sm-531f as they have same specs
Click to expand...
Click to collapse
You cannot flash SM-G531H on SM-G531F. they have different codes.
TheSMGCraft said:
You cannot flash SM-G531H on SM-G531F. they have different codes.
Click to expand...
Click to collapse
Can you make a rom for this device
Sushant515 said:
Can you make a rom for this device
Click to expand...
Click to collapse
I Made Already Custom Kernel
Kernel is A rom .
i'm busy in many other things, i'm trying to help everyone here but i developing other things like Bios Mod
i don't have booted Ubuntu currently i'm on Windows 7
TheSMGCraft said:
I Made Already Custom Kernel
Kernel is A rom .
i'm busy in many other things, i'm trying to help everyone here but i developing other things like Bios Mod
i don't have booted Ubuntu currently i'm on Windows 7
Click to expand...
Click to collapse
So do you have any pokemon go hack
TheSMGCraft said:
I Made Already Custom Kernel
Kernel is A rom .
i'm busy in many other things, i'm trying to help everyone here but i developing other things like Bios Mod
i don't have booted Ubuntu currently i'm on Windows 7
Click to expand...
Click to collapse
I.used the System disabler but yet frp lock is on
Sushant515 said:
So do you have any pokemon go hack
Click to expand...
Click to collapse
Seriously ???????? Pokemon GO ?!?!
Want a guide?
But get ready to ban on pokemon go
---------- Post added at 12:37 PM ---------- Previous post was at 12:32 PM ----------
Sushant515 said:
I.used the System disabler but yet frp lock is on
Click to expand...
Click to collapse
System Disabler Is wrong app
You need
DisableService and QuickShortcut Maker
here's video tutorials and full guide
Full Guide
http://forum.xda-developers.com/and...ide-how-to-disable-frp-lock-enabling-t3456538
Video's 2 Parts
Part 1 Disabling FRP Lock (YOU NEED TO REMOVE GOOGLE ACCOUNT BEFORE DOING THIS!!!)
https://www.youtube.com/watch?v=nMkuj9HpGP0
Part 2 Adding Google Account
https://www.youtube.com/watch?v=I7IZo1Ds00E
TheSMGCraft said:
I Made Already Custom Kernel
Kernel is A rom .
i'm busy in many other things, i'm trying to help everyone here but i developing other things like Bios Mod
i don't have booted Ubuntu currently i'm on Windows 7
Click to expand...
Click to collapse
Ok got everything made it to selinux permissive thanks a lot buy the shortcutmaker manager trick isn't working
The app has google account manger buy can't do anything with it it opens just pages that's all
Sushant515 said:
Ok got everything made it to selinux permissive thanks a lot buy the shortcutmaker manager trick isn't working
The app has google account manger buy can't do anything with it it opens just pages that's all
Click to expand...
Click to collapse
You have Verify Your Account ?!
you are doing something wrong
Did you removed Google account then Open DisableService going to system and searching for Google Play Services?
Then Searching for FrpService and FrpUpdateIntentService then unchecking both FrpService and FrpUpdateIntentService
Then Opening QuickShortcut Maker searching for manager. Opening 1 Th Email, And Password. Adding through browser?
if you do this right you will have google account with disabled frp lock
If you do something wrong
It will end up like this
Custom Binary Blocked by FRP Lock (BootLoaderLoop)
FRP Enabled
TheSMGCraft said:
You have Verify Your Account ?!
you are doing something wrong
Did you removed Google account then Open DisableService going to system and searching for Google Play Services?
Then Searching for FrpService and FrpUpdateIntentService then unchecking both FrpService and FrpUpdateIntentService
Then Opening QuickShortcut Maker searching for manager. Opening 1 Th Email, And Password. Adding through browser?
if you do this right you will have google account with disabled frp lock
Click to expand...
Click to collapse
But in quickshortcutmaker there isn't anything called as manger it just has google account manger in which it has name photo password lost and error option and nothing can be opened in browser
Sushant515 said:
Ok got everything made it to selinux permissive thanks a lot buy the shortcutmaker manager trick isn't working
The app has google account manger buy can't do anything with it it opens just pages that's all
Click to expand...
Click to collapse
after removing google account. and doing job in disableservice then using QuickShortcut Maker Manager trick to add google account
If you do everything right as result you will have FRP Lock OFF with Google Account
---------- Post added at 01:37 PM ---------- Previous post was at 01:28 PM ----------
Sushant515 said:
But in quickshortcutmaker there isn't anything called as manger it just has google account manger in which it has name photo password lost and error option and nothing can be opened in browser
Click to expand...
Click to collapse
I Don't know what are you doing that you don't have it in manager....
This is app for search meizu firmware and delete chinese apps
I use it to find daily updates
To get tips, make a long tap on the input field
To download the firmware, you first need to find it, then you need to click the "view" button and click on the link below.
After installation, you can get the root and delete the Chinese applications by script, for this you need to click the ". . ."
The source code is on github: https://github.com/YouROK/FlymeFirmwareChecker
Changelog:
1.04
- Added some devices to autocomplete
- Added some apks to remove script
- Added translation to release notes (Orig/En/Ru)
hi there. as i can see from Attached Thumbnails you are running nougat . can you please tell me if the heart rate sensor works?
Thank you..
ps have you tried the Flyme 6.2.0.0A version?
I use daily nougat. Sensors works well
heart rate sensor on home button
hi again please tell me if the heart rate sensor on home button works. because on global rom it is not.
thank you
Vasilislarisa said:
hi again please tell me if the heart rate sensor on home button works. because on global rom it is not.
thank you
Click to expand...
Click to collapse
Yes, work on daily
heart rate sensor on home button
hi.
thank you .
another ?. do you use a custom recovery as TWRP?
IF yes can you please upload?
i am on 6.1.0.0 global
if i update to 6.2.0.0 cn is there a choice to choose english language during setup?
how to uninstall all the Chinese apps?
can i have weather update for europe and my country? Greece?
thank you.
help
i upgrade to 6.2.0.0
i installed supersu 2.79
and after reboot stucked on boot screen
i entered recovery i tried to copy the update file but when the process started it ended with a message no firmware found
any suggestions?
thank you
Vasilislarisa said:
i upgrade to 6.2.0.0
i installed supersu 2.79
and after reboot stucked on boot screen
i entered recovery i tried to copy the update file but when the process started it ended with a message no firmware found
any suggestions?
thank you
Click to expand...
Click to collapse
SuperSU not support nougat(7.0).
You must now enter the recovery mode (volume + and power), connect the phone to the computer by usb, a disk will appear, copy the firmware and flash the phone.
On android 7+ you can not use supersu
help
thank you
i have done this, but on windows i get a error message saying that this file have properties that canot copy . if i continue the file disapearr . i tried this and on a mac with no luck
any suggestion
thank you
Vasilislarisa said:
i upgrade to 6.2.0.0
i installed supersu 2.79
and after reboot stucked on boot screen
i entered recovery i tried to copy the update file but when the process started it ended with a message no firmware found
any suggestions?
thank you
Click to expand...
Click to collapse
I'm haven't windows and Mac, in Linux all fine. The file copied to the phone is temporary, it disappears after reboot
thank you fried
I finally restored it. so I am good now.
thank you so much
Hi again.
My phone is OK now.
Please tell me if there is another dialer to use because I want to have big photo of the contact when I make a call
Thank you
Vasilislarisa said:
Hi again.
My phone is OK now.
Please tell me if there is another dialer to use because I want to have big photo of the contact when I make a call
Thank you
Click to expand...
Click to collapse
I use the standard dialer
Hi dear friend
You said that on Nougat I can not use supersu
Is there another app like this to use because I want to use a file explorer like es file and give root permitions.
Is there a chance to unlock bootloader?
Can I use a custom recovery like twrp
Vasilislarisa said:
Hi dear friend
You said that on Nougat I can not use supersu
Is there another app like this to use because I want to use a file explorer like es file and give root permitions.
Is there a chance to unlock bootloader?
Can I use a custom recovery like twrp
Click to expand...
Click to collapse
Use root from settings. Recovery is locked in pro6+ and not support custom recovery
thank you so much
need a root access?
No