[Q&A] [ROOT GUIDE] KNOX 0x0 NOTE 3 LTE (SM-N9005) LOLLIPOP DB 5.0 KNOX 0x0 [ROOT GUI
Q&A for [ROOT GUIDE] KNOX 0x0 NOTE 3 LTE (SM-N9005) LOLLIPOP DB 5.0 KNOX 0x0 [ROOT GUIDE]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT GUIDE] KNOX 0x0 NOTE 3 LTE (SM-N9005) LOLLIPOP DB 5.0 KNOX 0x0 [ROOT GUIDE]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is it possible to use this method on a Verizon Note 3 SM-N00V? Both models have the same processor and capabilities, but I'm not sure if the locked bootloader on my N00V would cause problems.
aestheticandroid said:
Is it possible to use this method on a Verizon Note 3 SM-N00V? Both models have the same processor and capabilities, but I'm not sure if the locked bootloader on my N00V would cause problems.
Click to expand...
Click to collapse
Well yes but I haven't tested it.
The root part I can guarantee will work but I will need to update the guide for other variant with the necessary kernels which I'm currently doing but the rom flashing, I cannot guarantee will work but I can make it for all those who are
Also please note that, the Dev base rom has additional modifications done for extended battery life. The Rom that I would provide would be 100% stock. (I'm saying this because the original stock firmware needs huge battery improvements).
I will update the thread with root kernel and stock kernels for N900V ASAP.
XxXKINGMAKXxX said:
Well yes but I haven't tested it.
The root part I can guarantee will work but I will need to update the guide for other variant with the necessary kernels which I'm currently doing but the rom flashing, I cannot guarantee will work but I can make it for all those who are
Also please note that, the Dev base rom has additional modifications done for extended battery life. The Rom that I would provide would be 100% stock. (I'm saying this because the original stock firmware needs huge battery improvements).
I will update the thread with root kernel and stock kernels for N900V ASAP.
Click to expand...
Click to collapse
Awesome! I'm completely find with a stock ROM, I just miss root capabilities so much!
So I need to wait for a different .zip kernel file that was made for the N900V and I shouldn't use the N9005_ROOT_Kernel.zip file you have linked up right now? Other than that, the only other file needed is the stock kernel for the N900V on 4.4.2, right?
aestheticandroid said:
Awesome! I'm completely find with a stock ROM, I just miss root capabilities so much!
So I need to wait for a different .zip kernel file that was made for the N900V and I shouldn't use the N9005_ROOT_Kernel.zip file you have linked up right now? Other than that, the only other file needed is the stock kernel for the N900V on 4.4.2, right?
Click to expand...
Click to collapse
Yes you shouldn't use the N9005_ROOT_Kernel.zip which I have provided since its only for N9005 model.
Unfortunately since I'm not aware of your model and the method provided requires a ROOT_Kernel for your variant, which I'm still trying to find.
Sincerely,
KINGMAK
replaced both a stock Note 3 4.4 and a stock Note 3 5.0 - no issues
have successfully replaced both a stock note 3 4.4 and a stock note 3 5.0 [both new] with this root without tripping knox method
both are working smooth and have no issues, have installed various apk's requiring root/superuser access and all are working 100% as should
did it for a bit of fun, while STILL waiting for the EE Note 3 & EE Note 4 official firmware's that were promised months ago [just in case your reading XDA Mr EE!]
so to clarify the steps, all worked, no crashes, knox still showing 0x0
cheers for all your work and testing King and thanks to all that contributed with various bits n bobs to allow you to do it!
I've just broken my Knox 0x0 rooted Lollipop ROM. I was trying to disable the startup and shutdown sounds and renamed 2 files in the /system/media folder. They were called samsungboot and samsungshutdown or something, I cannot remember the file extensions. Can some kind person please upload them so I can try to replace them via adb without tripping Knox? Or is there another way? Thanks.
EDIT - never mind, I just went for a reinstall
just to clarify. will this method work if i have unrooted stock 5.0? and installing 4.4 wont trip knox?
That's correct
Will this work on galaxy N900t
Im new here and would greatly appreciate a step by step guide to root a galaxy N900t using tmobile and lollipop. Thanx. Rob
Kernel version=pda?
hello in the Rooting instruction "Before starting this find your kernel version and build number, the last 3 letters/digits matter such as NG1 or NH1, etc"
kernel version=pda?
THANKS.
Q: Note 3 [Apps can't save/SD card not recognized]
Hello XDA
It's my first time to post here and my first attempt in flashing a phone. I have a Note 3 SM-N9005 on Kitkat which I upgraded and rooted following the guide by XxXKINGMAKXxX. I followed to guide to the letter and have successfully gained a rooted Android 5.0 without any apparent problems. I used the stock ROM by XxXKINGMAKXxX and NOT the Alexander dev base.
After a day of using though, I started noticing that some of my apps can't seem to save or recognize my SD card. Here's a short list of some app errors that I encounter:
1. Google Earth ("An SD card is required to run this application")
2. Facebook Messenger (Unable to save image)
3. Chrome ("Do you want to replace the existing FILE in your Documents directory?" followed by saving error)
4. Snapseed (saves file but cant be located anywhere)
5. Autodesk Sketchbook (same as Snapseed)
I have tried factory reset and have reformatted my perfectly functioning external SD but the problem came back again. I have GSam battery monitor and Cerberus app installed as a system app and I use Link2SD to freeze some apps that are deemed safe by others. I use Tasker but very basic profiles only and also have Greenify but I greenify most app that I installed via Playstore only.
PLEASE HELP. I don't know what to do with this phone anymore. Anyone here who have encountered the same problem?
Link to the guide I used: http://forum.xda-developers.com/galaxy-note-3/development/root-guide-note-3-lte-sm-n9005-lollipop-t3093183)
I flashed the rooted Polish ROM 3 times and had exactly the same problem each time. I moved over to the Alexendr Devbase rom and have had no such problems.
Sent from my LG-V500 using Tapatalk
dwl99 said:
I flashed the rooted Polish ROM 3 times and had exactly the same problem each time. I moved over to the Alexendr Devbase rom and have had no such problems.
Click to expand...
Click to collapse
So the problem is in the stock ROM? Well now that is sad. I wanted my ROM to be as close to stock as possible but with root access
Anyway, If I were to flash the Alexendr Devbase rom, where in the steps should I start? Do I need to downgrade again to Kitkat (part1 or part2?) or I will start with the flashing of Mobile Odin (part 3)? Im sorry but im really really new to these.
Thank you for the quick reply.
You need to downgrade to Kitkat, start at the beginning. The Devbase rom is pretty much stock with the option to debloat.
Sent from my LG-V500 using Tapatalk
dwl99 said:
You need to downgrade to Kitkat, start at the beginning. The Devbase rom is pretty much stock with the option to debloat.
Click to expand...
Click to collapse
Can I downgrade to Kitkat and begin step 1 just by flashing the Sammobile ROM? I believe the bootloader (OB6) and the CP file has already been flashed in the process, wouldn't that be a problem i.e. create bootlop/brick ? Have you tried it yourself?
Thank you again.
jiraiyamandaraya said:
Can I downgrade to Kitkat and begin step 1 just by flashing the Sammobile ROM? I believe the bootloader (OB6) and the CP file has already been flashed in the process, wouldn't that be a problem i.e. create bootlop/brick ? Have you tried it yourself?
Thank you again.
Click to expand...
Click to collapse
Just follow the guide from the beginning, the BL & CP will be over-written when you flash the stock KK ROM with PC Odin.
Fix Possible
For all those that have had issues regarding the SDCard and Permissions. All you need to do is after you have flashed the rom. Clear your Cache, Data and then Fix SD card permissions.
All of these options are present within the Recovery mode of NOTE 3. Hope fully this will fix the problem. Fortunately, I have not faced any such problems. I have retired from this project as I have previously mentioned that I no long have a Note 3 with Knox 0x0. I have moved over to Sony Xperia series and working with other developers to make mods for it.
Sincerely,
KINGMAK
---------- Post added at 08:14 AM ---------- Previous post was at 08:14 AM ----------
Yes usually the last 3 digits or letters are the PDA version.
dwl99 said:
I flashed the rooted Polish ROM 3 times and had exactly the same problem each time. I moved over to the Alexendr Devbase rom and have had no such problems.
Click to expand...
Click to collapse
XxXKINGMAKXxX said:
For all those that have had issues regarding the SDCard and Permissions. All you need to do is after you have flashed the rom. Clear your Cache, Data and then Fix SD card permissions.
Click to expand...
Click to collapse
I figured out what's causing the bug on the stock Polish ROM. It seems that wiping the cache partition in recovery causes the app permission to be messed up. I've tried reflashing twice and a couple of factory reset; I get the same result after going to recovery and wiping cache. Fixing SD Permission is not available in my recovery menu. I've switched to Alexndr DevBase OEA and so far so good. Thank you guys for helping out. Great great guide.
Hey , you can do this manual by Version deodex of " devbaseAlexander ?
For root knox00 in 5.0
Thanks.
Enviado desde mi SM-N9005 usando Tapatalk 2
Related
1. I'm still on 4.3, My baseband is N900TUVUBM17, I would like to root WITHOUT tripping Knox.. Is this at all possible at this juncture? If so, what method should work? (I can follow directions, I just need confirmation)
2. I need 4.3 or 4.4 stock for when I eventually turn this phone back in for the JUMP program to get the Note 4, is there a link somewhere?
3. Are most ROMs for the Note 3, 4.3? And if there are 4.4 ROMs, can I flash those if I root my phone on 4.3? I'm interested in SlimKat mostly with Lean Kernel.
4. I heard that flashing a kernel or ROM will trip Knox, so how does one go about doing any of this without tripping it?
5. I thought t-mobile had a flash counter when you turn your phone in (different from Knox), is that true? And can it be reset? If so how?
I'm not new to rooting, and I have read these forms before making this topic. I just need mostly a confirmation on what has worked for people with the same baseband as me..
As always, thank you!!
t3tr1s_ said:
1. I'm still on 4.3, My baseband is N900TUVUBM17, I would like to root WITHOUT tripping Knox.. Is this at all possible at this juncture? If so, what method should work? (I can follow directions, I just need confirmation)
2. I need 4.3 or 4.4 stock for when I eventually turn this phone back in for the JUMP program to get the Note 4, is there a link somewhere?
3. Are most ROMs for the Note 3, 4.3? And if there are 4.4 ROMs, can I flash those if I root my phone on 4.3? I'm interested in SlimKat mostly with Lean Kernel.
4. I heard that flashing a kernel or ROM will trip Knox, so how does one go about doing any of this without tripping it?
5. I thought t-mobile had a flash counter when you turn your phone in (different from Knox), is that true? And can it be reset? If so how?
I'm not new to rooting, and I have read these forms before making this topic. I just need mostly a confirmation on what has worked for people with the same baseband as me..
As always, thank you!!
Click to expand...
Click to collapse
Check This thread to see if you can root without mesing with KNOX
It doesn't matter what Samsung software is on the device when you exchange via the JUMP programme from what I am aware, so long as it's original Samsung TouchWiz
There's loads of ROMS for 4.3 and 4.4 - however the 4.3 are not updated so much now if at all - AllianceROM currently still support 4.3 and is a very good ROM - There is plenty now for 4.4 - and I mean plenty, @civato does some great kernels also and his ROM FlexKat is pretty great. - XNOTE is another big ROM for 4.4 as is Omega and SweetROM all of which are just great. You have to try them to get a feel of which you prefer though
Kernel flashing/Custom recovery flashing will indeed trip your KNOX. There is(was?) a method in the General section about how to do it safely via Mobile Odin PRO. but you'd have to read up on that.
As for the T-Mo counter, I cannot comment on that as I do not have an N900T however you can look @ the T-Mo forum for more answers which is HERE
Root De Late Vega will allow you to root without tripping Knox, provided that you do not update the phone.
After rooting you can use mobile Odin to flash 4.3 version MJ7 but you cannot update to KitKatt if you wish to keep both root and Knox 0x0. KitKatt has a new bootloader which is patched against the Vega exploit.
Sammobile.com is the place to find sock firmware. To Vega it you'll need the stock BMI7 firmware for your device to begin.
You must not flash any custom recoveries or kernels if you wish to keep Knox intact either.
Sent from my SM-N9005 using Tapatalk
Q&A for [ROM][Nov 2][G900FXXU1ANJ1][4.4.2][Knox 0x0][ART][Private] NeatROM v2.5.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Nov 2][G900FXXU1ANJ1][4.4.2][Knox 0x0][ART][Private] NeatROM v2.5.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Nice work. I love this Rom.
When will releas the 2.5.3?
WiFi
Just installed the rom on my G900f. All is well but wifi will not turn on. Solution please.
Dropaneye said:
Just installed the rom on my G900f. All is well but wifi will not turn on. Solution please.
Click to expand...
Click to collapse
Did you factory reset after the flash?
Dropaneye said:
Just installed the rom on my G900f. All is well but wifi will not turn on. Solution please.
Click to expand...
Click to collapse
Depending on how you installed the rom and your phone.
Did you flash the modem via odin.
Hi,
I have a noob question regarding the installation of this rom.
I am running on ANE2 Stock ROOTED, what is the procedure in installing this rom?
Sent from my SM-G900F using XDA Premium 4 mobile app
Change themes
I know it may be a silly question, and might be because I missed something during set-up., but how do you choose one of the twlauncher themes? Can it be done through the UI at all or can you only choose a theme at install time? If that's the case are there any screenshots or descriptions of the themes available?
I followed to instructions on the main post to install latest version of NeatROM (latest Samsung and 0x0 knox method). Only place I deviated is I had to downgrade my kernel before so I could get root without tripping knox.
Again I apologise if I missed something obvious.
Prof Peach said:
Depending on how you installed the rom and your phone.
Did you flash the modem via odin.
Click to expand...
Click to collapse
I did a full wipe with the TWRP utility then installed the rom from SD card.
Better Camera Mod in your ROM
Hi sale,
i have a question to you.
Can you do a better camera mod in your ROM e.g. this one?
http://forum.xda-developers.com/galaxy-s5/development/mod-hx-camera-mod1-0quality-t2816831
i hope that is OK. Please let me know
After i swiched to ART it continously shows " Unfortunately the process.com.android.phone has stopped” error and can't even unlock the device. I performed factory reset via stock recovery but nothing sucess. Any solution?
Hi,
I am currently on STOCK ANE2 ROOTED. Which is better in installing this ROM?
Unroot my current ANE2 then update to ANG2?
or Update to ANG2 then install the rom?
Thanks!
I flash this gr rom. Knox 0x0. But system status custom. Is this ok. Can i go back tot stock with evrything orginal if i want. Thanks
Sent from my SM-G900F using XDA Premium 4 mobile app
virus?
hello,
i have scann the zip, this antivir "wssyncmlnps program as a trojan on my s5" in G900FXXU1ANJ1_NeatROM_v2.5.3
pls delete the virus from zip !
gan0n said:
hello,
i have scann the zip, this antivir "wssyncmlnps program as a trojan on my s5" in G900FXXU1ANJ1_NeatROM_v2.5.3
pls delete the virus from zip !
Click to expand...
Click to collapse
I scan downloads on my laptop with avast and malwarebytes after downloading with a strict firewall software and never seen any alerts . I'd suggest it's a false positive.
Maybe someone in the know will tell us what the file is for and if it's something that can be binned without affecting functionality.
tnx
tnx for knox 0x0.
Dear sale.....ive use this rom since nov....suddenlly this 2 days i cant open my playstore....what should i do...ive try few version of playstore but still cant access....thanks in advance...
Sent from my SM-G900F using Tapatalk 2
Can this ROM be used on a g900a rooted with SS and how is the beat way to install it since I have locked a bootloader
Aroma Less Version of the Rom or (Aroma Less)Updater Script Edited
Hi I would like to know if you can make an aroma less version of this rom so that it automatically installs all of the options and to also be able to put it on My Att galaxy s5 with safestrap becuasse this g900f rom is compatatble with my device...????
OR Maybe Just edit the Updater Script So that it Doesnt contain Aroma Installer and then i can do the rest......
Please and Thank you
towelroot doesnot support my s5
hi
since towelroot does not support my galaxy s5 g900f , baseband g900fxxu1ang8, what is the best way to root my device without triggering the knox ? . is it even possible to do so ? .
thank you
My current rom is ANI4 stock non rooted. Can i install this rom following the second to the last instruction which is
"Installation Instructions: If you're coming from a Samsung stock NON-Rooted NG2/NG7/NG9/NH4/NH6/NJ1 ROM (KNOX 0x0)"
Just want to make sure because ANI4 wasnt included on the instructions and also my baseband is ANG8.
AP: G900FXXU1ANI4
CP: G900FXXU1ANG8
CSC: G900FOLB1ANI1
TIA
[Q&A] ★ [ROM/ROOT][N900VVRUCNC4][4.4.2] Stock Root DeOdex [06/18/14] NC2/NC4/D
Q&A for ★ [ROM/ROOT][N900VVRUCNC4][4.4.2] Stock Root DeOdex [06/18/14] NC2/NC4/DevEd COMPATIBLE ★ Insecure Modules/Selinux Permissive ON NC4 Bootloader!! ★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ★ [ROM/ROOT][N900VVRUCNC4][4.4.2] Stock Root DeOdex [06/18/14] NC2/NC4/DevEd COMPATIBLE ★ Insecure Modules/Selinux Permissive ON NC4 Bootloader!! ★. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
will this file unroot my phone?
I want to know if these files will put my phone back to factory firmware? I accidentally unrooted, not realizing what I was doing really. This looks like the same file name (nc2kernel.tar.md5.zip ) as I have seen on other sites, but I cannot get those to download correctly. My Note 3 is with Verizon and it is running kernal. I just want my phone to be UNROOTED like I just got it out of the box. I am concerned about warranty. I am back up all and I have also dowloaded ODIN and it's ready to run.
Thanks to:
ChainFire - for superSU
Hashcode - For Safestrap For Retail Note 3's
SexTape - For the Leaked NC2 Goodness!!
Surge1223 - for starting the deodex base
BajaSur - for getting me back going on n3!!
hsbadr - For Being Brave with the nc4 firmware and giving u guys some NC4 Love First!!
XDA:DevDB Information
★ [ROM/ROOT][N900VVRUCNC4][4.4.2] Stock Root DeOdex [06/18/14] NC2/NC4/DevEd COMPATIBLE ★ Insecure Modules/Selinux Permissive ON NC4 Bootloader!! ★, ROM for the Verizon Samsung Galaxy Note 3
Contributors
BeansTown106
Version Information
Status: Stable
Stable Release Date: 2014-06-19
Created 2014-06-19
Last Updated 2014-06-19[/QUOTE]
help getting from nc4 deodex to jellybeans b6
I followed this thread with success after many many attempts to get rooted and hacked. ive had nothing but problems with NC4 getting to this point.
http://forum.xda-developers.com/showthread.php?t=2787627
basically ive wanted to be hacked running jellybeans ROM's since I got the phone. ive been running his ROMs on my galaxy phones for years now. so I finally was able to follow the step by step to get a stock deodexed ROM. I created on ROM SLOT 1 I wiped and installed jellybeans B6 but it just black screens. what do I need to do now to get B6 running? do I need to install the B6 ROM then again install the NC2 kernel before booting? not sure what to do next
thanks in advanced,
al
kind of a noob to rooting higher end phones
ive been rooting the cheap cricket phones ans recently ive gotten the verizon galaxay note 3 on the nc4 build. im wanting to install hyperdrive rom but im getting lost watching video after video and reading page after page. i see some people say i need permissive and some dont say anything at all. could you point me in the right direction please and thank you very much
knox0x1 said:
ive been rooting the cheap cricket phones ans recently ive gotten the verizon galaxay note 3 on the nc4 build. im wanting to install hyperdrive rom but im getting lost watching video after video and reading page after page. i see some people say i need permissive and some dont say anything at all. could you point me in the right direction please and thank you very much
Click to expand...
Click to collapse
im on nc4 also. I used the towel root program to get rooted, and then installed the safestrap but I forgot which one. it wasn't the latest version I don't think but it was one of the last ones. and I had to install it a couple times to get it installed correctly. then I followed the link I posted above your post. the only downfall, now im stuck, I cant flash an other rom to the phone successfully. they all fail to boot and I have to revert back to the linked rom. id like to get on jellybeans rom, ran them on my galaxy nexus and my note 2 and he makes a great rom! good luck!
Flash Kernel in safestrap without odin
Im currently on OTA NC4 and I want to install this rom in my stock rom slot in Safestrap. (I would like to do this so I can install custom roms).
My question is, can I flash the NC2/NC4 kernel required without going into download mode and using odin?
Thanks in advance!
Been running this rom for over 8 months. Very solid. I do have two issues though bluetooth seems to skip while playing music occasionally (fresh restart fixes). I hate magazine from the center button. What options do I have to change that.
kennypasatrain said:
Im currently on OTA NC4 and I want to install this rom in my stock rom slot in Safestrap. (I would like to do this so I can install custom roms).
My question is, can I flash the NC2/NC4 kernel required without going into download mode and using odin?
Thanks in advance!
Click to expand...
Click to collapse
You need to use Odin. Rather simple, just follow the instructions re Odin use. Unfortunately, the instructions for this rom found atnthe beginning of the thread neglects to mention the need for Odin to flash the kernal.
Tidal HiFi
(1411 kbps flac) and
Spotify Premium
(320 kbps Ogg Vorbis); Android App; WiFi; SNGN3; USB TGO; Fiio E18 (96/24) dac/dap; Dunnu 1000 IEMs;1st World resident (Sympathies to those of lesser capabilities)
VZW note 3 4.4.4 to 4.4.2 root
hey guys,
I just bought a Note 3 (n900v) and it has 4.4.4 and I want to root it (all of my other phones and my wife's are all rooted) but it looks like there isnt a root for 4.4.4. So I thought about downgrading to 4.4.2 and then rooting but I having trouble finding the stock rom (links are all dead) then I ran across this. Can I use this to downgrade/root my phone?
I was also wondering if it might just be easier to go to a custom rom? I have never ran a custom rom but from my understanding most of them are pre-rooted and have a lot less junk installed on them. can anyone recommend a good custom rom? (with install instructions >_<)
Thanks guys.
-Drog
Cannot save or install ROMs - Rooted, SafeStrap installed, Knox OK
Howdy, folks!
My Verizon Note 3 details: SM-N900V / Android 4.4.2 / Kernel 3.4.0-1487472 / build version NC4 / bootloader NC4 / Knox = 0x0 / Build date 4/28/14.
Device is rooted (via TowelRoot and confirmed with Titanium Backup). Safestrap 3.75 is "Installed". BusyBox 1.232 is installed.
As I understand it, in order to save or install ROMs I *must* use SafeStrap.
When I run SafeStrap the screen shows "State: Installed" and "Safe System: Not Active".
Tapping "Reboot to Recovery" does reboot the phone but I do NOT get any options to save or install any ROMs. The phone just reboots.
I thought I read somewhere I may need to (somehow) roll back to NC2...
Any ideas, folks?
Thanks!
MMS Stagefright vulnerability
Are there any expected updates/patches to address this vulnerability?
Hi Guys
There's an OTA 5.0 update ready for my GS5. The problem is that I have root (Towelroot) and want to keep it.
From what I've been reading it looks like all root methods are either ustable of KNOX tripping.
Thanks in advance.
Same issue here
I've got a G900F - no carrier, but running on 3 in the UK anyway. When I got it, it was on Kitkat, and Towelroot wouldn't work due to the compile date being > Towelroot's ability. I downgraded the kernal as per the thread in the General section (as a note, the thread "How to root - all variants" is so far out of date, it's going to lead to people with less experience nuking their devices, perhaps we should unsticky that thread and write up a cleaner version for all the variants out there?) then rooted, and changed the kernal back to my original one.
Great - now I have a rooted, KNOX 0x0 S5 running kitkat. Now Lollipop is available and I'd like to update. So some questions on how I do this and...
1. Retain root with KNOX 0x0
2. Not trash my installed apps / configurations
I know I'll need to update via say Kies as OTA won't be available to me but if/when I update will I keep installed apps / configs? And how do I keep root without affecting KNOX?
This would, I imagine, be a common scenario and worth creating a sticky / section in an updated "How to root all variants" sticky.
Thanks everyone,
a.
Take this only as a pointer because I can't remember exactly what I read, but I think you can update to Lollipop using Mobile ODIN Pro with the Pre-Root option checked, using a stock Lollipop ROM from sammobile / XDA so long as you are already running a rooted KitKat ROM, and that doesn't flag the KNOX counter
Im new to the S5 and just gathering info myself, so make sure you check up on that yourself thoroughly first
*Detection* said:
Take this only as a pointer because I can't remember exactly what I read, but I think you can update to Lollipop using Mobile ODIN Pro with the Pre-Root option checked, using a stock Lollipop ROM from sammobile / XDA so long as you are already running a rooted KitKat ROM, and that doesn't flag the KNOX counter
Im new to the S5 and just gathering info myself, so make sure you check up on that yourself thoroughly first
Click to expand...
Click to collapse
Thanks for reminding us of Mobile Odin Pro. It's got the ability to reinject root on firmware installation and not tripping the binary counter.
Can someone confirm whether this method still works on Galaxy S5 when installing 5.0 firmware?
The last comment from Chainfire in his mobile odin thread was that it wasn't compatible yet.....but being worked on......no updates since that post.
Sent from my rooted kn0x0 SM-G900F S5
Yep, that's what I thought as well. I guess I will have to wait a bit. No big deal.
Thanks Keithross
Hey guys,
I'm going to install a custom ROM today to see if that maybe fixes my SensorHub not working. I just need guidance on the correct procedure. I have a SM-N900 model (N900XXUEBOL2) running Lollipop 5.0. Do I first need to root, or can I install a custom ROM straight from the stock recovery? It seems like there aren't may ROMS available for the SM-900 model, but I've found one that seems to have good battery life and performance: TR-ROM. This is the procedure I will follow:
1) Root phone with CF-Auto-Root-ha3g-ha3gxx-smn900.zip
2) Use ODIN to flash n900-cwm-recovery-6.0.5.0-kk_L5.0(0812).tar
3) Flash TR-ROM from CWM: TR-ROM XDA
Is this all correct? I just want to make sure that I don't brick my phone!
Also, how can I revert back to stock if I need to?
Thanks so much!!!
Guit4eva said:
Hey guys,
procedure. I have a SM-N900 model (N900XXUEBOL2) running Lollipop 5.0. can I install a custom ROM straight from the stock recovery?
NO
Click to expand...
Click to collapse
OK. ..so are the 3 steps I mentioned above correct?
http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670
I'm trying to follow that guide, but the build number of N900 on the CF-Root site says:
LRX21V.N900XXUEBOA6
Whereas mine is:
N900XXUEBOL2
Will is still work? Also, it says a locked bootloader will probably brick your device. How do I check if mine is locked?
I've rooted and installed custom roms on many devices before - I'm not sure why rooting and installing custom rom on the Note 3 is so daunting...
Google?
Sent from my Note 3 running Purify CM13
Dejan Sathanas said:
Google?
Sent from my Note 3 running Purify CM13
Click to expand...
Click to collapse
I wouldn't be asking here if I hadn't already Google'd extensively.
But of course... The phone is brand new, so there's no info yet available. I understand...
Yes, do as you wrote in the first post. Should be ok, as those are the latest files.
Sent from my Note 3 running Purify CM13
I'm finding that there is actually TOO much information (too many variables). That's why I'm asking specifically about my version, as I can't seem to get my head around it - and rather than brick my phone, I'm merely seeking a bit of guidance from someone more experienced than me. In the past, when I was rooting previous phones, I received a lot of useful information and help from XDA - but it seems like now all I'm getting are sarcastic remarks and general unfriendliness. Why is that?
You have N900 its an exynos model not the qualcom .Not something that has a big following on here .
The links in your post point to zips , whats the point of me downloading a zip ??
CF autoroot you need to read the instructions regarding builds .
Locked boot loader no idea for that model .
CWM yes flash via Odin if its the correct one for your model .
Flash rom yes the rom will give you the method .