Database Users

DISCONTINUED - [ROM][25-feb-11][v1.3] Dexter's Froyo 2.2.1 for XT720

so here is the new edition with uk kernel, basically pretty much the same as before with correct sensor drivers now.
Changelog v1.3 (Android v2.2.1 edition) Download nandroid image here or mirror
- xavwanted's libOMX and MediaGallery.apk which seems to fix HD recording and playback
- Riley600's interactive governor fix
- callwaiting fix
- kousik's mount-o typo fix
- Mioze7Ae move /oc to /system/oc
- bootanim by helmi666
- Email.apk replacement​
Changelog v1.2b (Android v2.2.1 edition) Download patch here
- fixes problems with callwaiting functionality.​
Changelog v1.2a (Android v2.2.1 edition) Download nandroid image here
- 720P recording fix
- re-added old MediaGallery as Camera app requires it.
- there can be possible hickups with mediascanning (so you know)​If you do see many FC's its a symptom of not having done factory reset, so this should indicate whether you need to do it or not.
Changelog v1.2 (Android v2.2.1 edition) Download nandroid image here
- fixed mediascanner issue
- removed old mediagallery (not supported) , now only Gallery3D available.
- removed VoiceCommands app, cpu intensive and taking much storage.
Note, due to the bug in mediascanner and decoding and on top ext2sd support, quadrant benchmarks drastically drops when ext2 is enabled, if the sdcard is not a class6 or higher.. but media decoding bug alone caused incorrect reportings, so dont be surprised when you test now.
Its a full nandroid for new and existing users. if you're using 1.1+ you do not need to WIPE settings, just restore nandroid and reboot, signatures will be recalculated and bootup takes maybe little more, but it works fine.​
Patch update Changelog v1.1b (Android v2.2.1 edition) Download patch here
- HDMI added to settings menu, let me know how it works (not tested)
- different proximity sensor module (tested with z-devicetester seems better)
- facebook fix still included.
- Support for loading overclock module at startup.
- apps2ext partition support , will mount at startup if a 2nd partition is found.
its not advanced, so you need ext2/ext3 partition for now.
NOTE: Patches goes into /OpenRecovery/updates and is applied in openrecovery menu "apply update".​
Changelog v1.1a (Android v2.2.1 edition) Download nandroid v1.1a link
- Based on 2.2.1 milestone framework leak
- Sync facebook is working
- Lockscreen is new (Blur like)
- see this link for framework theme's.​
Changelog v1.1 (Android v2.2 edition) Download v1.1 link
- fixed: OCR camera function currently FC (crash) (Mobireader.apk added)
- fixed: Contacts apk will be replaced in next update.
- fixed: HDMI through media player
- fixed: /mnt/sdcard mount issue​
If you want stock korean 2.2 with just english language and working sensors, download this nandroid dump, if you will probably need the 1.1 including recovery.apk to install this the easy way.
but else follow instructions in my other releases, and put nandroid backup into the /nandroid/openrecovery folder and restore using OpenRecovery.​
See this post, if you wish to restore a stock rom, or to enable apps2sd filesystem on sdcard
Install instructions:
Make sure sdcard is visible, when you get to step 6 of instructions, or it all fails, same with restore..
A: users with stock 2.1 can proceed to step 1 in instructions.
B: users with stock SBF korean 2.2 rom , need to flash stock 2.1 and goto step 1
C: Users with 1.1+ of rom with OpenRecovery , can skip WIPE and factory reset, and a restore of the new nandroid backup included in the download link, and goto step 8 (and skip step 9 for factory reset)
root it (SuperOneClick ) - included with zip
install OpenRecovery , use included apk.
reboot phone once
copy the folder "nandroid" to root directory of your sdcard.
Make sure sdcard is not attached to pc using "mass storage share" to pc.
Run OpenRecovery app and "install Recovery".
Press Boot recovery
restore the backup "stock22xxxx"
wipe / factory reset in OpenRecovery
reboot
Issues reported by users in v1.2a:
- Radio FM volume cannot change.
- MediaGallery does not do videoplayback
Issues reported by users in v1.0:
- Radio FM volume cannot change.
- Sync account option for facebook / Twitter is not added in settings when account is configured.
- Camera language not going to change (its korean app, so not support for other langs)
- LEDS do work, its sensors that makes them go off/on (no need to report this anymore)
STATEMENT:
Please don't keep asking the following question directed to me, public or via PM;
- Can you include language XXXXXXXX .
Answer: NO
- Can you teach me how to do custom roms
Answer: NO
- will you include RTL for hebrew
Answer: NO
- will you make other roms like cyanogen,htc etc..
Answer: NO
for new users unable to write in public forums, i cannot answer all your PM's personally, as that gets to be a quite a few per day and many monthly...i am not a support central for xt720 community..i simply don't have that kind of time available.

Dexter_nlb said:
if i press camera button here (1-2 sec) it opens?
media button (the small one becide the cam button?) ? yes i see its not doing any action
from what i read now, the known accelerator driver issue + led,hdmi is 2 majors, im not sure about other issues becides the extra languages which for some seem to cause issue..
the way the launcher works is a matter of taste (seeing like 20+ android devices)
- if you're coming from stock 2.1 there is differences and more functions, but if you tweaked alot maybe less features are here, like dalvik.
- rotation is a problem if you plan alot of games with acc. functionality..
- I personally dont experience problems, except the buttons which personally i would love to fix now..
I think overall there is a positive feel about the first working release.
Click to expand...
Click to collapse
I am still unable to sync with facebook contacts, anyone else?
-->settings ---> accounts add the facebook account successfully but then not in the accounts list and then contacts in phone do not sync.

Dexter_nlb said:
It seems that many not being experienced users, still try to install and here is the instruction for installing the rom.
Install instructions (based on korean sbf):
1. Install korean sbf (STSKT_N_79.33.50R) using RSDLite ( link here )
- boot your xt720 into bootloader (press power up while holding VOL+ + and shutter button during bootup)
- when RSDLite application on pc says "connected" , your ready to flash
- select the SBF
- press start
2a. Set language to english, set usb mode into Charge Only and USB debugging on in the Settings->Apllications->Development menu.
2b. root it (using SuperOneClick) - ( link here )
3. install OpenRecovery , follow instructions on ( http://bit.ly/gIPoXo ) files included (OpenRecovery & OpenRecovery.zip )
5. copy the folder "nandroid" to root directory of your sdcard.
6. boot into OpenRecovery (adb shell reboot openrecovery)
7. restore the backup "stock22" in openrecovery
8. wipe / factory reset in OpenRecovery
9. reboot
Download here
APK for easy installation and rebooting into OpenRecovery is in the works (based on previous CWM recovery app)
Click to expand...
Click to collapse
Added a rule for people who do not know how to use SuperOneClick

hellmonger said:
I am still unable to sync with facebook contacts, anyone else?
-->settings ---> accounts add the facebook account successfully but then not in the accounts list and then contacts in phone do not sync.
Click to expand...
Click to collapse
deleted.. i misunderstood the q here

hi there ! is it the final version of 2.2 or still in testing process?
nice job and thank you all...

FM RADIO also missing.....

@Dexter, thank you for contacts.apk. But how to install it? After replace in /system/app it's says - It's not installed, and when i try to install it - it says: I can't be installed.
For more issues: how about light sensor, that detects when you speak on your phone?
On 2.1 when you speak touchscreen goes off and you cant press it errorly.
Thank you very much.
FM RADIO also missing.....
Click to expand...
Click to collapse
That from 2.1

Facebook account missing.
Dexter_nlb said:
deleted.. i misunderstood the q here
Click to expand...
Click to collapse
After full flash and all instructions followed corectly i can boot into 2.2 without any problems.
i set up my account with google, go to the market, download "facebook for android" install is succesfull, i then go to ==> settings menu ==> Accounts menu, add account, choose facebook, am successfull at login in to facebook, return to accounts menu = Facebook account is not there.
And my phone contacts do not sync with facebook.
Thank you

And my phone contacts do not sync with facebook.
Click to expand...
Click to collapse
Did you set your FB freinds to sync in the FB app?

joe206hdi said:
Just flashed korean sbf ... maybe due to i´d used launcherpro in stock rom i can´t get into the rom background and apps are still there in korean rom.
going back to european rom and do a wipe/reset before flashing again the korean one...
later more
@dexter can´t we use universal androot instead of super one click
Click to expand...
Click to collapse
finally fixed it
1.flashed again german stock rom sbf file
2. do a factory reset in stock recovery
3. flash korean sbf file while reboot unplug the usb - when rsd lite shows massage "reboot manualy" - phone is still in reboot ( when i don´t do this it won´t work ?!?!
4. go on with dexters xt720-2.zip nandroid procedure
@dexter unversalandroot won´t work - just tested before superoneclick - adb install worked fine but no root....
-------
bugs
camera options are still in english - i´m on german
more within tomorrow
Joe - thanks great work

anyone else get a Installation error Unknown reason -18 when trying to install battle bears. i loved that game. worked on 2.1 even tho it said it didnt

3rdstring said:
Did you set your FB freinds to sync in the FB app?
Click to expand...
Click to collapse
Is yours working?
Where are those settings please? not in the accounts menu cause facebook is not there, i am able to add it from that menu but then it disapeares, when i clic add again facebook option is availible but just clics to nowhere and returns to the add account page....

smurfb said:
I been following this thread, very intresting! I thought, would it not be possible to use the kernel from XT720 (2.1), beause its the same kernel version? Or is too much changed?
Click to expand...
Click to collapse
ok, i went back once more and flashed just 2.1 kernels from uk rom, and indeed all sensors work now.. but,but,but... no 3D accelerator is currently activated, so screen lags really alot..
but yes, with that kernel it still boot up fine, with a few changes.
edit: update - ITS WORKING!!! running with 2.1 uk release kernel , its working now, all sensors activated..

Where are those settings please? not in the accounts menu cause facebook is not there, i am able to add it from that menu but then it disapeares, when i clic add again facebook option is availible but just clics to nowhere and returns to the add account page....
Click to expand...
Click to collapse
In the facebook app if you tap on "Facebook" at the top you go to the page to navigate to news feeds, friends, etc. If you hit your options button there there is a settings screen that includes preferences for how contacts are sync'd.
HTH

3rdstring said:
In the facebook app if you tap on "Facebook" at the top you go to the page to navigate to news feeds, friends, etc. If you hit your options button there there is a settings screen that includes preferences for how contacts are sync'd.
HTH
Click to expand...
Click to collapse
Yes i saw those settings, unfortunately they have no effect or bearing on the accounts.
I believe this is a bug, yet no one has confirmed or denied being able to reproduce it.

All sensors activated!!
I think smurfb deserve a little thanks, for pushing the request/idea just to try loading the old uk kernel once more, so i did and this time i fixed the problems with loading the old kernel and lib/bin required, its not much and most (2.2) korean state is kept intact..
ill do some testing after the new nandroid backup and start uploading v1.0

Dexter_nlb said:
I think smurfb deserve a little thanks, for pushing the request/idea just to try loading the old uk kernel once more, so i did and this time i fixed the problems with loading the old kernel and lib/bin required, its not much and most (2.2) korean state is kept intact..
ill do some testing after the new nandroid backup and start uploading v1.0
Click to expand...
Click to collapse
does that mean u activated the 3d accelerator. and would replacing the settings.apk from 2.2 from motoroi enable hdmi since the settings arnt even there anymore in this version the hdmi libs and everything is still there jus no hdmi.

khalpowers said:
other way u can install terminal su on your phone after flash to froyo..then u can su from there...
Click to expand...
Click to collapse
IT WORKED!!!!!!!!!!!!!!! THANK YOU SO MUCH!!!!!!!!!!!
AND DEXTER!!!!!!!!! THANK YOU!!!!!!!!!!! You're amazing.
Ill be up to any testing you guys need me to do

easye420 said:
does that mean u activated the 3d accelerator. and would replacing the settings.apk from 2.2 from motoroi enable hdmi since the settings arnt even there anymore in this version the hdmi libs and everything is still there jus no hdmi.
Click to expand...
Click to collapse
yes, 3d is fully functional now. I dont think it will work, but i will find a way to add the functionality..
the korean rom has only english, which im sure not many appreciate, although camera as one is used from that rom so only english is enabled.
but i will for sure try and get HDMI working..
I got FMRadio app added, does it help?

Thank you so much for making this, Dexter. We are hungry of froyo, asking for more. But you deserve to take a break
which languages does it have?
I will install it soon. can someone upload a video of it?

[INFO] Latest Flashtool 0.9.11.0 for ALL XPERIA (Windows)

Windows Edition - v0.9.11.0 - MD5 : A0F880F3CF420A31D86026F49A2013D7
Updated on 12/06/2013 ©2011 by Androxyde
More information at http://androxyde.github.com/
Flashtool Release Notes:
* 0.9.11
This version is a big split with every previous ones.
And not fully featured as previous can be.
I changed the UI framework from Swing to SWT because of a better integration with Mac UI.
Here is what is missing from previous releases :
- No multilingual UI
- No recovery installer
- No kernel installer (for 2010 devices)
- No ROM cleaner.
- Cannot Add/Edit/Remove devices.
No TA hex editor (in pro mode)
Version fully compatible with all 2013 devices (Z/ZL/Tablet Z etc etc)
Unified Bootloader unlock feature with the new BLU icon. No more unlock plugin.
As for flashing, BLU is available even without any connected device, even with
unrecognized devices.
Updated SuperSU package. Added servicemnu root hack
(works with Z/ZL for all FW up to .434)
Known working for Xperia T/V too
Added TA partition backup/restore. Using this feature, you can backup TA before unlock.
Restore TA will relock the devicee and get DRM back as well as BE2
(full complete relock). You cannot count on this feature if ever your device is
already unlocked. Missuse of this feature can brick the device
Introduction to Flashtool:
Flashtool is a flashing software that can be used to :
1. Flash original Images (Android 1.6, 2.1, 2.3 Images)
2. Root your phone
3. Install Recovery, Busybox, custom kernels
4. Clean your Rom (remove /system/apps apps of your choice)
(Be careful, unless you really know what you do, do not modify the default list.
This can make your phone stuck at the SE Logo)
5. Clear dalvik cache
6. Optimize (install of JIT v2)
(Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
7. Customize (installs apps found in the custom/apps folder of the flashtool)
8. Clean uninstalled (remove any references to system apps removed in the
Clean (root needed) step)
9. Edit any text file on the device
10. Rebrand your device
Download Link
MOD EDIT: Not authorized mirror links.
MD
HIT THANKS BUTTON IF IT HELPED

This is not yours, and you are unable to support it. Moving this to General.

I'm pretty sure the devs of flashtool don't want it mirrored.
Sent from my Xperia Tablet Z using xda developers app

Thread Closed
As this is an info post to somebody elses work, the following actions have been taken.
1. Mirror download link removed.
2. Thread is closed as there is no need to post replies.
MD

MIUI V5 for Meizu MX_3.8.9

My English is very poor
http://www.miui.com/thread-1297535-1-1.html
- Based on Meizu forum qwerrazxs bottom package patchrom made ​​available
- Supported phone models for the M030, M031, M032
- Recommended end package for the flyme 2.1.3
- Basically reached the level of everyday use, recommended updates
- Outgoing recent task approach: setting - button, and then according to their own preferences
note! Brush the first time, please make a backup
1 double clear brush back official flyme 2.1.3
2, upgrade the baseband MX baseband (V02.1201.01-248)
3, Flyme firmware must be root (Settings - login account - More - Open System permissions)
4, download MIUI ROM, on the sd card root directory
5, download MX Brush Kit miui recovery (mx2 mx generic). Install Open and grant it root privileges.
6, point reboot bootloader mode
7, the first double clear, and then put the brush directly rom, Meizu's brush with the same way.
http://pan.baidu.com/share/link?shareid=331361021&uk=1997143330

thanks for sharing.
its weird to find no reply in this thread.

Hey all, FYI the latest version of MIUI fo Meizu MX (M030, M031, M032) may be found here:
[Meizu MX] [合作开发组] MIUI V5 for Meizu MX_3.11.8 by helinchun (4.1.x JB)
I had success installing it from a prerooted Flyme 2.1.x ROM (3.0.39-oversea kernel). The package only modifies the /system and /data partitions, leaving the bootloader, kernel & recovery still intact. It means the device is still perfectly capable of reflashing an official update.zip, although I don't believe Meizu will ever release a newer one beyond the 2.4.1 "test firmware".
- MIUI has a built-in superuser management UI, you don't need to install your version of su+superuser/supersu
- Some applications are .CN specific. I recommend slipstreaming Google Play (vending) and a standard keyboard such as TouchPal X / LatinIme in the zip package (you may want to look at other MIUI V5 ROMs in the forum for examples)
MIUI Installation for Meizu MX:
0- ALL IMPORTANT DATA BACKED UP AND SECURED IN A SAFE PLACE. your current rom is rooted (HK, or CN with Flyme open system privileges), with RW access to /system. Copy your MIUI zip package to /sdcard/
1- Install RecoveryInstaller.apk, open it and grant it elevated privileges when requested
2- click first button with some chinese text to install files to /system (no other partition is altered)
3- click second button with some chinese text to complete & restart phone. After reboot you should land in the MIUI recovery program for MX and MX2
4- It is not touch-enabled, use Vol+/Vol- to navigate, Back/Menu to Cancel/OK
5- Factory Reset + Wipe Cache + Wipe Data
6- Install from ZIP on sdcard (not update.zip), let it operate for a while
7- After install, go up/back into "Power" menu and restart phone
8- Phone will remain on the MIUI logo for a long time on the first run (generating cache, I suppose). LEAVE IT ALONE, DO NOT INTERRUPT IT. It shall last 5 minutes or so.
9- ???
10- Profit!
Notes:
- You may continue to use the normal Meizu recovery mode (VolUp+Power) to flash a stock update or radio firmware.
- I cannot provide support for everyday use of the phone, as mine's been given away to another person.
- Apparently you don't need a Xiaomi account to use the ROM.
Unrelated remark:
- Android 4.4 (KK/KLP) has minimal specs of 512 MB RAM, thanks to improvements in Linux Kernel 3.8 - yet Samsung hasn't released a 4412 BSP with 3.8 AFAIK

TwoPointZero said:
Hey all, FYI the latest version of MIUI fo Meizu MX (M030, M031, M032) may be found here:
[Meizu MX] [合作开发组] MIUI V5 for Meizu MX_3.11.8 by helinchun (4.1.x JB)
Click to expand...
Click to collapse
Hey thanks! Seems to be updated weekly too!
Too bad the transfer speeds from China are horrendous (any chance for a mirror?). I'm on 1 gbps and still max out at a measly 30 kB/s. Oh well, i'll just wait for a few hours.

Hi man, thank you so much for your installation steps! Just installed it from flyme 2.1.3 .. I think the post says to install from 2.4.1, but I'm not sure.. Anyway, seems to be working ok. Do you think it will be an issue in the future?
---------- Post added at 04:16 AM ---------- Previous post was at 03:52 AM ----------
Long pressing the home button doesnt bring up anything.. solution?

dagbro said:
Hey thanks! Seems to be updated weekly too!
Too bad the transfer speeds from China are horrendous (any chance for a mirror?). I'm on 1 gbps and still max out at a measly 30 kB/s. Oh well, i'll just wait for a few hours.
Click to expand...
Click to collapse
I got distracted and never actually got to installing it, so now I'm back almost a year later.
AND IT WORKS!
MIUI V5 is still being updated each week for the MX, and the latest release works great. It made my phone feel alive again.
ALL the files i used:
RecoveryInstaller.apk: From OP of this thread.
Flyme OS 2.1.3 downgrade : http://meizufans.eu/forum/thread-m03x-flyme-2-1-3-official
Latest MIUI from official site: http://en.miui.com/download-188.html
Then just follow TwoPointZero's instructions.
If you want Gapps as well: http://en.miui.com/thread-3998-1-1.html

[ROM] Sero 7 Pro (US/UK/AU/DE) - AOSP 4.4.4_r2 DoPa v2.7

** DoPa6 (AOSP - Marshmallow) ** is now available - see this post for details and downloads
Click to expand...
Click to collapse
** DoPa5 (AOSP - Kitkat) ** is now available - see this post for details and downloads
Click to expand...
Click to collapse
DoPa v2.7 is a ROM for Sero 7 Pro owners everywhere. Whether bought in the US, Britain, Australia, Germany, or elsewhere, your tablet is supported.
The ROM starts with well-tested AOSP code and adds core functions where needed but skips the frills that are easy to add on - and remove when they cause problems. It's aimed at people who want to choose their own features and not have them imposed by the developer.
New / Improved
International Support - a single ROM for all Sero 7 Pros sold worldwide
New in v2.7 - support for the German model of the Sero 7 Pro (m470bsg)
Speed Control - a unified kernel provides speed when you need it and stock performance when you don't.
Use the new Performance page in the Settings app to control it
exFAT - support has been moved into the kernel for improved performance
Boot Animation - a handsome new DoPa animation thanks to @mikembley, our first-ever UK user
To get you started customizing your ROM, v2.7 offers these add-ons:
built-in: SuperSU, Xposed Installer GravityBox, Phab7
optional: have your tablet claim it's a Nexus7 to get more apps in PlayStore
The package does not include any Google apps (e.g. Playstore). See this thread for links to the latest GApps packages.
Installation
UK / AU / DE / First-time Users
If you're upgrading from a stock ROM (any variety), please click the "show content" button and read the instructions very carefully - they're long but your tablet's continued good health may depend on it!
STEP 1: Install Philz Touch Recovery
Users outside the US must use this version of Philz to install the ROM - neither the stock recovery nor other versions of CWM or Philz will work. Users in the US should use it just to avoid problems.
Stock Recovery
If you still have the stock recovery program you'll have to use the 'fastboot' program to install Philz. On Windows, this requires installation of the 'ADB' USB drivers while in fastboot mode (see below). A package containing the drivers, fastboot, adb and other files can be found in the 2nd posting on the DoPa Stock ROM thread. Note: there are several batch files (*.bat) in the package - do NOT run them.
put fastboot.exe in a convenient directory, then unzip sero7pro-philz6.58.0-dopa-v2.7.zip and put the file philz.img in the same directory (you won't need the other files)
unplug any USB cable, then press and hold Power+VolumeUp; the word "fastboot" should appear on the screen (nothing further will appear)
plug the USB cable from your PC into the tablet, then install the driver (open Device Manager, right click on "Other Devices->Fastboot", then select "Update Driver Software")
after installing the driver, open a command prompt ("DOS window") and change to the directory containing the files
enter fastboot flash recovery philz.img
when done, force the tablet off, remove the USB cable, then reboot into recovery: Power+VolumeDown - you should see the word "recovery", then the Philz menu
CWM
If you have CWM installed, copy sero7pro-philz6.58.0-dopa-v2.7.zip to an SD card, insert it in the tablet, then:
remove any USB cable, then boot into recovery: Power+VolumeDown
select "Install Zip", then "Choose zip from /storage/sdcard1"
select the file, then OK the selection
when done, back out to the main menu, select "Advanced options", then "Reboot recovery"
after the initial "recovery" screen, you should see the Philz menu
Regardless of how you install Philz, the result should be the same. If it boots OK, compatibility is assured
STEP 2: Backup
I can't emphasize this enough: you must make a backup of your existing ROM. If something goes wrong, there's no way to get your device working again other than to restore it using the backup you've made. There's also another reason to do a backup: before installing the new ROM, you will have to reformat your /data partition. This will wipe out your apps, your settings, and most importantly, all the music/photos/etc stored on your "internal SDcard". These last items can be restored if you follow the instructions below:
ROM
You must do your backup onto a real SD card that you can remove because your "internal SDcard" will be erased in the next step. In fact, it wouldn't be a bad idea to do two backups (preferably to different cards) just in case one is faulty.
on Philz main menu, select "Backup and Restore"
next, select "Backup to /storage/sdcard1" (the 6th item on that menu)
if there's enough space on the card, the backup will start without any further prompt; it could take anywhere from 3 to 15+ minutes depending on the amount of data and the speed of your card
if needed, you can enable compression to create a smaller backup: select "Misc Nandroid Settings -> Default Backup Format -> tar + gzip", then on the previous menu, tap on "Compression" to set the appropriate level
Internal SD card
This is optional but worthwhile if you have files you value stored on the tablet:
on Philz main menu, select "Backup and Restore"
next, select "Custom Backup to /storage/sdcard1" (the 9th item on that menu)
on the next screen, deselect everything, then select "Backup /data/media" (the next-to-last item)
finally, select "Start Custom Backup Job"
STEP 3: Install the DoPa ROM
Before you begin, you may want to download a Google Apps ("Gapps") package that you can install after the ROM. See this thread for a selection of packages. To avoid complications, I'd suggest choosing the "Nano Modular Package" to get just the basics - you can always upgrade later. Put your Gapps package along with the ROM zip on an SD card and insert it into the tablet - you can use the same card you're using for your backups.
on Philz main menu, select "Wipe and Format Options", then "Custom Format Options"
select "format /data and /data/media (/sdcard)" (the 8th item), then OK your choice
back on the main menu, select "Install Zip -> Choose zip from /storage/sdcard1"
select sero7pro-aosp444-dopa-v2.7.zip, then OK your choice - the install process should take about 40 seconds
next, install your Gapps package
return to the main menu, select "Reboot System Now", then hold your breath for the next 3-4 minutes
the Hisense screen should be up for less than a minute, followed by the DoPa boot animation for another 2-3 minutes
when the Google setup screen appears, you'll probably get a warning that "Bluetooth Sharing" has stopped - after you clear it, you'll never see it again
If the boot animation is still running after 5+ minutes, force the tablet off, then reboot. If that doesn't fix it, try formatting /data again. If it still doesn't work, restore your tablet from your backup ("Backup and Restore -> Restore from /storage/sdcard1"), then post a message here. If everything works out as hoped for, re-read the first posting in this thread for details on some of the features (and problems) of this ROM.
Upgrades
While any SELinux-enabled version of CWM or TWRP can be used to install the ROM, the companion Philz Touch CWM-based recovery is highly recommended if you use exFAT-formatted SD cards.
from DoPa AOSP Kitkat ROMs (v1.0-v2.6) - no need to wipe or format anything!
from pre-Kitkat (v4.4.x) or any CM-based ROMs - wipe your /data partition before installing to avoid unnecessary problems.
install sero7pro-aosp444-dopa-v2.7.zip
- the installer will wipe (but NOT format) /cache and dalvik-cache for you
install your preferred Gapps package
- upgraders: this is required to prevent your downloaded Google apps from crashing
optionally, install the Nexus7 spoof (sero7pro-nexus7spoof-dopa-v2.7.zip)
reboot (ignore any "fix root" prompt - it's incorrect)
f2fs / ext4 Migration
This DoPa ROM gives you the flexibility to format any of your built-in partitions using either the f2fs or ext4 file systems.
As part of your install - or at any time - you can switch formats without losing any data. Click "show content" for instructions.
If you haven't already installed Philz Touch Recovery, please do so first. Philz has gotten complicated, so read this carefully!
make a nandroid backup to your external SD card
select Wipe and Format Options, then Custom Format Options
select toggle f2fs <-> ext4 migration
- be sure there's a confirmation message at the bottom of the screen
select each partition you want to convert or wipe, then select the format and OK your choice
Important: to convert your /data partition, you must select format /data and /data/media (/sdcard)!!!
use Custom Restore from /storage/sdcard1 to restore the contents of the partitions you reformatted
Notes
Speed Control - this version uses a redesigned kernel that caps processor speeds at stock levels during start-up, then adjusts them once the tablet is up and running. Go to Settings->Performance to enable this feature, and to set the top speeds for the CPU (1.0-1.5ghz) and GPU (448-520mhz). When disabled,the processor will remain at stock speeds (1.2ghz/448mhz) unless changed by a 3rd-party app.
Encryption - the first time you formatted your /data partition, you lost the ability to encrypt your tablet's data. Using the companion Philz Touch Recovery to reformat /data (using either filesystem) will restore that ability. To preserve your existing data, do a backup first, then restore just /data when done. Note: you must select "format /data and /data/media (/sdcard)" when reformatting.
OTG Charging Support - this kernel supports charging the tablet while an external device (flash drive, keyboard, etc.) is attached to the USB port. This feature requires either an OTG 'Y' cable or an OTG USB hub, and the AC adapter that came with the tablet. For this to work, power must be connected to the cable or hub before plugging it into your tablet. The OTG device(s) can be attached/detached at any time.
WiFi Display (a.k.a. Miracast) - video works but its performance may depend upon your TV; audio does not work.
Bluetooth Sharing - on the initial boot, this service will FC due to a timing issue. The system will restart it and you should never see this error again.
Added/Changed in v2.6
International Support - added support to the kernel for the British and Australian models of the Sero 7 Pro
Overclocking - replaced separate standard and overclocked kernels with a unified kernel that uses less power when overclocked; added a new Performance page to the Settings app to control it
exFAT Support - moved exFAT support to the kernel for improved performance
Boot Animation - added a custom boot animation created by @mikembley
Added/Changed in v2.51
Flexible Formatting - added F2FS support for the /thirdparty and /mnt/modem partitions
Bug Fix - enabled Philz Touch Recovery to format the /thirdparty and /mnt/modem partitions using EXT4
Added/Changed in v2.5
Flexible Formatting - enabled use of either F2FS or EXT4 for any of the built-in partitions
External Storage - added support for F2FS, and for devices formatted without a partition table (i.e. Windows-style "super-floppies")
Android version - upgraded from AOSP 4.4.4_r2 to AOSP 4.4.4_r2.0.1
Recovery - added a DoPa version of Philz Touch Recovery
Added/Changed in v2.1
SD Cards - added support for SD cards formatted with the NTFS or exFAT filesystems
Android version - upgraded from AOSP 4.4.4_r1 to AOSP 4.4.4_r2
Added/Changed in v2.0
Google Now - voice activation (i.e "OK Google") now works in the Google Now launcher
kernel - added OTG charging support.
Credits
ziddey
randomblame
davepmer
the CM team
Downloads
sero7pro-aosp444-dopa-v2.7.zip the full ROM
sero7pro-nexus7spoof-dopa-v2.7.zip identify tablet as a Nexus7 to (possibly) show more apps in PlayStore
sero7pro-philz6.58.0-dopa-v2.7.zip a customized version of Philz Touch CWM-based Recovery v6.58.0
sero7pro-format-thirdparty.zip - only needed if you are downgrading from DoPa6 (Marshmallow) to previous versions (i.e. this one)
GPL Notice: the source code for this kernel is available at https://github.com/dolorespark/android_kernel_hisense_m470bsa on the 'master' branch.

Thanks man been running it since day one no problems and very stable.

Can We call these the Semi OFFICIAL ROM ?

I installed v1 after it booted up play store wasn't installed. Did any one else experience this? I did a dirty flash and a full wipe.
Sent from my Sero 7 Pro using xda app-developers app

How much free space should there be on a system after a fresh install?

datboy143 said:
I installed v1 after it booted up play store wasn't installed. Did any one else experience this? I did a dirty flash and a full wipe.
Sent from my Sero 7 Pro using xda app-developers app
Click to expand...
Click to collapse
I followed the instructions and noticed the same thing and gmail kept crashing. Flashing the latest gapps will fix all of that. I still have some testing to do and will report back later.

Gazoo119 said:
I followed the instructions and noticed the same thing and gmail kept crashing. Flashing the latest gapps will fix all of that. I still have some testing to do and will report back later.
Click to expand...
Click to collapse
Ok will do thanks
Sent from my SGH-I777 using xda app-developers app

GPS and Google music
I noticed on version 0 that GPS could take awhile to lock on, and if you turned it off and back on that sometimes it wouldn't lock on at all. I also noticed an issue when running Google music where it would freeze and cause the tablet to reboot. Anyone having these issues on the new build? Otherwise, this is one of the cleanest KitKat builds I've used

gotshores said:
I noticed on version 0 that GPS could take awhile to lock on, and if you turned it off and back on that sometimes it wouldn't lock on at all. I also noticed an issue when running Google music where it would freeze and cause the tablet to reboot. Anyone having these issues on the new build? Otherwise, this is one of the cleanest KitKat builds I've used
Click to expand...
Click to collapse
Don't use Google music but I do use scanner radio and whenever I switched streams the tablet would freeze and I would have to hold the power button to turn the tablet off.
Now its working like it should. So this latest build might fix Google music.
Another issue I was having is when I opened the calendar it would not close hitting the back button. Its closes fine now.
The GPS doesn't seem to load any slower for me than it did with the stock ROM but I don't use it much.
Anyway I would recommend trying this latest build. Just make sure you wipe cache and dalvik cache and flash the latest gapps. Everything should still be the same as before when you boot with the new ROM and hopefully you will notice some improvements.
---------- Post added at 07:31 PM ---------- Previous post was at 07:22 PM ----------
dolorespark said:
This is a plain-vanilla build of KitKat for those who prefer their enhancements added on rather than built in.
Click to expand...
Click to collapse
Just want to thank you for fixing the sound bug. V4A is working perfectly and as far as I can tell so is everything else. I will keep testing and if I run across anything strange I will post here. Your work on this is very much appreciated

dolorespark said:
This is a plain-vanilla build of KitKat for those who prefer their enhancements added on rather than built in. The only changes to the AOSP and kernel code are those needed to ensure compatibility or to enable standard features Hisense omitted (e.g. USB-OTG support). Because it relies on well-tested AOSP code, it is likely the most stable KitKat ROM available for this tablet. For the same reasons, it is almost certainly not the fastest KitKat ROM either.
To make it more functional, the package includes a handful of apps most people find useful: SuperSU, ES File Explorer, Xposed Installer, GravityBox, and my Phab7 UI switcher. To avoid the wrath of Google, it does not include any GApps; see this thread for links to the latest packages.
Installation
Having an SELinux-enabled version of CWM or TWRP installed is a prerequisite. You can find versions built by randomblame here or by davepmer here.
If you're upgrading from v0 of this ROM, clearing cache and dalvik-cache should suffice. Otherwise, do a full wipe of both your data and cache partitions. As always, a backup of your existing setup is recommended.
Notes
All features should be present and work as expected with these exceptions:
WiFi Display (a.k.a. Miracast) - video is enabled but very slow; audio is disabled because it doesn't work and generates 45 error messages per second when enabled
SELinux - the kernel runs in permissive mode due to missing entries in its configuration.
As these issues are resolved, the ROM will be updated accordingly.
Credits
randomblame
davepmer
the CM team
Download
sero7pro-aosp442-dopa-v1.zip
GPL Notice: the source code for this kernel is available at https://github.com/dolorespark/android_kernel_hisense_m470bsa on the 'master' branch.
DoPa
Click to expand...
Click to collapse
Thanks for the rom. After flashing the rom I rebooted, powered down and installed gapps. On reboot I got a message about root access possibly being lost and offering to fix it, I said yes. First time I get that, is it ok? (It seems to be working ok)

chopin_k said:
Thanks for the rom. After flashing the rom I rebooted, powered down and installed gapps. On reboot I got a message about root access possibly being lost and offering to fix it, I said yes. First time I get that, is it ok? (It seems to be working ok)
Click to expand...
Click to collapse
This is normal..
Sent from my Sero 7 Pro using XDA Premium 4 mobile app

enfermo said:
Can We call these the Semi OFFICIAL ROM ?
Click to expand...
Click to collapse
Generic, yes - (semi-)Official, no.
datboy143 said:
I installed v1 after it booted up play store wasn't installed.
Click to expand...
Click to collapse
Gazoo119 said:
I followed the instructions and noticed the same thing and gmail kept crashing. Flashing the latest gapps will fix all of that.
Click to expand...
Click to collapse
As noted in the OP, none of the GApps (e.g. Playstore) were included in this ROM. I have updated its verbiage to be even more explicit. As to GMail crashing, I'm a little puzzled how that could happen if it wasn't included - did you mean the generic Email app?
gotshores said:
I noticed on version 0 [...] an issue when running Google music where it would freeze and cause the tablet to reboot. Anyone having these issues on the new build?
Click to expand...
Click to collapse
I hope not: v1 wouldn't have been released if that bug were still present. The problems you encountered were caused by enabling sound effects, either built-in or 3rd-party - the notes for v0 said as much. Perhaps Google Music enabled them automatically.
chopin_k said:
Thanks for the rom. After flashing the rom I rebooted, powered down and installed gapps. On reboot I got a message about root access possibly being lost and offering to fix it, I said yes. First time I get that, is it ok? (It seems to be working ok)
Click to expand...
Click to collapse
I ran into that too - and something even odder. SuperSU's su and daemonsu program files should have a flag that marks them as authorized to give root access. That flag is now missing but I can still get root whenever needed. I don't know if this is to be expected with SELinux in place or just something specific to SuperSU. I'll investigate...
tinybeetle said:
How much free space should there be on a system after a fresh install?
Click to expand...
Click to collapse
After installing the ROM, the "Gapps Standard" package, and Antutu, Settings->Storage says I have 5.48gb available. This is the free space on your /data partition and includes the space used by your emulated SD Card (which is actually just a subdirectory of /data).

"Smart ass alert"
Not only was playstore not installed, it doesn't give me the winning lottery numbers for next week! What gives?
Ok, being serious, Thank you for your time and effort. This weekend I am going to finally give this a try.

Dolorespark,
I haven't messed with any sound effect settings, so it must be Google Music messing with things. Have you noticed any issues with GPS? I can run any of the other rom's, including CM11, and it locks on immediately, but it seems random with AOSP. Sometimes I'll wait a coupled of minutes and it'll get a lock, and other times it won't lock on at all. Anyway, thanks for all you do. I'll keep testing, and keep my trusty backup of DOPA v2.

Working brilliantly so far. V0 to V1 smooth after adding gapps back to the mix. Sounds like time to reinstall V4A and sync some commute podcasts!
Thanks Dolorespark!

envygreen said:
Working brilliantly so far. V0 to V1 smooth after adding gapps back to the mix. Sounds like time to reinstall V4A and sync some commute podcasts!
Thanks Dolorespark!
Click to expand...
Click to collapse
intermittently get google services has stopped.... only that but everything looks good so far.... anything to fix google services stopping? also had a root fix need after rebooting, did yes and everything is ok... thanks DOPA....

dolorespark said:
I hope not: v1 wouldn't have been released if that bug were still present. The problems you encountered were caused by enabling sound effects, either built-in or 3rd-party - the notes for v0 said as much. Perhaps Google Music enabled them automatically.
Click to expand...
Click to collapse
I had this issue on v0 as well and it seems that it's not gone yet. I only wiped dalvik & cache coming from v0 so I'm not sure if that's part of the problem, but I'm still experiencing the Google Play Music crash. It only seems to crash when playing content that hasn't already been cached locally. Attached is a logcat.

dolorespark said:
As noted in the OP, none of the GApps (e.g. Playstore) were included in this ROM. I have updated its verbiage to be even more explicit. As to GMail crashing, I'm a little puzzled how that could happen if it wasn't included - did you mean the generic Email app?
Click to expand...
Click to collapse
No it was gmail. It would close followed by the message "unfortunately this application has closed" or something like that. It wasn't really crashing but rather would not stay open. Anyway flashing the latest gapps fixed that and all is good for me so far.
I played with the tablet extensively last night and did not experience any problems. Even movies, streaming or local using XBMC play using a bluetooth headset. There is no stuttering as there was in all of the previous Jelly Bean roms, stock....DoPa1 and DoPa2. I don't know if that was a KitKat fix or what but I am very happy with the stability of this rom and the fact the XBMC bluetooth bug was fixed is icing on the cake. Of course V4A makes it even better.
I will continue to run the rom and will post if I find any bugs. Thanks again.:good:

Been running since v1 was posted. Have to say the music bug is no more! Listening to lucky mixes all day today and email, g+, and everything my wife and kids have done on it. No problems! Thanks You have really taken your time to make this rom perfect!!!!

Gazoo119 said:
[gmail] would close followed by the message "unfortunately this application has closed" or something like that. It wasn't really crashing but rather would not stay open. Anyway flashing the latest gapps fixed that and all is good for me so far.
Click to expand...
Click to collapse
nccruz said:
intermittently get google services has stopped.... only that but everything looks good so far.... anything to fix google services stopping?
Click to expand...
Click to collapse
Did you use the latest GApps package? As Gazoo119 noted, that fixed a problem with another app that uses Google Play Services. If the problem persists, you may want to go to Apps->Google Play Services, then tap the "Manage space" button. On the next screen it lets you clear all data.
gotshores said:
Have you noticed any issues with GPS? I can run any of the other rom's, including CM11, and it locks on immediately, but it seems random with AOSP. Sometimes I'll wait a coupled of minutes and it'll get a lock, and other times it won't lock on at all.
Click to expand...
Click to collapse
I hadn't tried GPS at all until you mentioned it. I installed Google Maps but couldn't get a lock at all. It's raining here, so I couldn't get fully in the clear. Instead I sat in my car and it still did nothing. Finally, I forced-stopped the app, cleared data and cache, then retried. This time it only took a few seconds to find me. I then turned off GPS, rebooted, and moved to my semi-covered patio. After getting everything going again, it took 10-15 seconds to get a rough fix (off about 70 feet) and it continued to hold it even after I went inside. You may want to try clearing Maps' data (if that's what you're using) to see if that helps.
unomar said:
I had this issue on v0 as well and it seems that it's not gone yet. I only wiped dalvik & cache coming from v0 so I'm not sure if that's part of the problem, but I'm still experiencing the Google Play Music crash. It only seems to crash when playing content that hasn't already been cached locally. Attached is a logcat.
Click to expand...
Click to collapse
Whatever crash you're seeing isn't the one that I fixed. That one was produced a full-blown hardware crash with a register dump. Your logcat doesn't show a register dump or even a Java runtime exception dump. There were two errors that caught my eye but I don't know if either would cause an "Unfortunately..." popup.
Code:
04-08 09:40:24.213 E/DownloadTaskImpl( 3156): Download failed because of IO Error: Socket closed
04-08 09:40:24.213 W/DownloadTaskImpl( 3156): Experienced error when trying to download: [mId=[7871, DEFAULT] mTrackTitle="Le onde" mRemoteId=9ea5817b-9753-348e-af52-ea7c0947c6cb mSourceAccount=1954430662 mPriority=3 mOwner=MUSIC_PLAYBACK mSeekMs=0 mRetryAllowed=true mFileLocation=[mFullPath=/data/data/com.google.android.music/files/music/mplayback_7871.tmp mStorageType=INTERNAL mCacheType=2] mExplicit=false]
Here, the (software) communication link being used to download "Le onde" was broken. Later on, you got this error:
Code:
04-08 09:40:57.133 I/wpa_supplicant( 618): wlan0: CTRL-EVENT-DISCONNECTED bssid=00:1a:30:e4:64:00 reason=0
[...]
04-08 09:40:59.803 E/DownloadTaskImpl( 3156): Download failed because of IO Error: recvfrom failed: ETIMEDOUT (Connection timed out)
04-08 09:40:59.803 W/DownloadTaskImpl( 3156): Experienced error when trying to download: [mId=[363, DEFAULT] mTrackTitle="Black Hole Sun" mRemoteId=8076a782-8454-3fd8-899d-213bb23836ac mSourceAccount=1954430662 mPriority=0 mOwner=MUSIC_PLAYBACK mSeekMs=0 mRetryAllowed=true mFileLocation=[mFullPath=/data/data/com.google.android.music/files/music/mplayback_363.tmp mStorageType=INTERNAL mCacheType=2] mExplicit=true]
This download failure is a lot easier to understand: your WiFi connection had dropped. I don't know that either of these is something I can fix. As above, you may want to try the obvious fixes if you haven't done so already: use the most recent GApps package, clear the app's cache and data, and play with the app's caching options.

[26.09.16] Dr.Ketan ROM I Jio VoLTE I Safe version I Green Battery

[26.09.16] Dr.Ketan ROM I Jio VoLTE I Safe version I Green Battery
ROM Features
- Light Debloated
- De-Knoxed
- Pre rooted
- Enabled all languages
- Included stock Kernel
- Screen mirror fixed
- Messaging Features
Backup/Restore Option
No SMS to MMS conversion
200 recipient
- Shortcut you assigning to long press home (aroma selectable)
Flashlight
GoogleOK
KillApp
Screenshot- Power menu updated for two more fetures apart from 5 way reboot
TorchLight - Flashlight
Shortcut - You can select any application or shortcut (special shortcut you can get from aroma like google/Kill app/ScreenShot/Torch) You have to select Shortcut as default action when you first time click on it. Later you can re assign shortcut anytime from ROM Tool - Reser power menu shortcut
- Key light duration
- Outdoor Mode
- ScreenShot Toggle
- SystemUI Mods Aroma selectable)
Stock Clock with stock batter
Stock Clock with seconds (HH:MM:SS) with stock battery (ROM Default)
minit battery and minit clock with lots of customization of clock like colors/Style/Position etc
Option to recert to ROM default SystemUI
- 300 + Fonts
- Extended Power menu
Power Off
Restart
Reboot
Hot Reboot
Download
Recovery
Safe Mode
Emergency
Shortcut
Torch Light
To Use Shortcut - you have to select 'Shortcut' option as default when asked. After this you can select any application you want to use with shortcut. To use Kill Application (Which will kill foreground app) / Screenshot, you have to select corresponding shortcuts from aroma while flashing ROM.
- Network meter with color option
- Left statusbar virtual key (Single press menu, Long press Multiwindow) with toggle
- Right virtual key (Single press lock, Long press power) with toggle
- Viper Sound Mode (Stock built in kernel compatible)
- Dolby Sound Mode (Stock built in kernel compatible)
Aroma have chouce to select Viper only Dolby only OR Both
- Toolbox and SideKey (Need to select from aroma)
- Long press home customization.
You can use almost any app or short cut with long pressing home. To use it open settings - default application - device assistance app - device assist app - select LP home in place of google.
- Extra shortcut added to aroma. (Requires if you want to assign long press home/Power menu shortvut to set as screenshot)
Screenshot (You can assign to long pree to capture screenshot)
Kill App (You can assign to long pree to kill foreground app)
Google OK - You can assign to long press home to start direct listening (No need to say hi galaxy)
- Outdoor mode - Settings-Display
- KeyLight duration setting (Settings-Display)
- Titanium and Mega Preinstalled as user app and you can simply remove as normal apk.
- 5 Way reboot menu -
This is standalone app for 4 way reboot option
Depending on status fuctions available may vary. ROM user will have options for Turn off, Reboot,Reboot to recovery and Reboot to download mode.
Pro users have extra soud features (Do not disturb/Vibrate/Sound) + Virtual key on Rt lower corner to launch 4 way reboot menu.
- ROM Tool
Essebtial Fix -When device boot first time it will popup to apply essential Fix, Recommended to apply fix. In case you missed that, you can do it from ROM Tool
SystemUI mode - to change Virtual key settings,Network meter and color options
Update and Bug Fix - Link to bug fix and update in case any.
Force Root - If some old application doesn't working (not asking for root access), you can apply Force root to fix issue (Probable) For this, you must have already applied essential Fix
after that long press on 'Apply essential fix' and reboot device. Now those app should run normally.
PRO features of ROM
How to Get Pro
Some features may vary from above mentioned. Read Changelog post for your ROM version for details.
Circulating/Distributing/Using any part of ROM to other project is strictly not allowed.
Credits and Thanks :Huge Thanks and credit goes to @Phil3759 for his awesome SeLinux permissive kernel. Also a big thanks for is outstanding work for Note community.
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
@xperiacle the amazing developer for reference to his work and tools. @gharrington for 3minit battery and QuickLaunch. @Chenglu @jcadduono @bigbiff and all other team members for custom recoveries. @ guitardedhero and @ worstenbrood for sound mods. @ UNS4 for RAM mod.@ficeto for awesome custom settings. @ oluwaponmile for references @mariozawa for potato mode @BSDgeek_Jake for his Ad free host @TEKHD for some Tips.
XDA:DevDB Information
Dr Ketan ROM N7, ROM for the Samsung Galaxy Note 7
Contributors
dr.ketan
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Kernel : Stock (pre-rooted). Source code (samsung) here
Created 2016-08-28
Last Updated 2016-09-26

ChangeLog
Dr.Ketan ROM Basic - Initial version
Dr.Ketan ROM M1
Dr.Ketan ROM M2
Dr.Ketan ROM M3
Installation Guide & Download N930F/FD Dr.Ketan ROM ROM M3 'Safe Version' Green Battery
http://forum.xda-developers.com/showpost.php?p=68861660&postcount=387
Installation Guide & Download N930F/FD Dr.Ketan ROM ROM M2
http://forum.xda-developers.com/showpost.php?p=68761768&postcount=356
.

Installation Instructions :
- Download Odin 3.12.3 or higher
- First you need to Flash Bootloader and Modem for PH6. If you already having a ROM running on PH6/7 then skip this step.
In case you are on Old version, Download N930FD_PH6_Bootloader and Modem zip, extract it and Flash BL*.tar.md5 file with Ap tab and Phone*.tar.md5 file with Phone tab of odin. This file is for N930FD and in case you have different variant, kindly update your base first with OTA/Full ROM flashing.
- Next you required id TWRP recovery. If you already have one then skip this, otherwise download twrp-3.0.2-0-gracelte.img.tar and flash using Odin. In case Odin Fail during flash, reboot to recovery - wipe cache and try again. Here is original thread for TWRP support.
- Once you have TWRP Installed Download ROM and copy on SD card or USB OTG device.
- Reboot to recovery (TWRP) - I recommend clean install. Select to format device.
- Select to Install - select storage (Where you copied ROM zip) - navigate ROM zip and select it.
- It may take few minutes to finish
- Reboot and again wait for few minutes till android wizard starts
.

Reserved 3

Reserved 4

Reserved 5

Reserved 6

Reserved 7

Last

dr.ketan said:
Guys I have bricked my device while working of N7 root but before that I got opportunity to make a simple basic ROM with prerooted and specially for Indian users who want to use VoLTE and bought the device from abroad.
ROM is minimally debloated with some critical fix, Odexed.
I will write Installation instructions soon.
Status : Uploading........................
XDA:DevDB Information
Dr Ketan ROM N7, ROM for the Samsung Galaxy Note 7
Contributors
dr.ketan
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2016-08-28
Last Updated 2016-08-28
Click to expand...
Click to collapse
dr.ketan said:
Last
Click to expand...
Click to collapse
Great dr. Ketan
---------- Post added at 09:20 AM ---------- Previous post was at 09:14 AM ----------
@ Dr. Ketan just try to do via diffrent pc through smart switch. It happened to me to but on diffrent pc with 2-3 tries it restored.

Thanks doc. I hope you get the device replaced or fixed from dubai.
Does this Rom include the new ota BHP7

johar.sanjeev said:
Great dr. Ketan
---------- Post added at 09:20 AM ---------- Previous post was at 09:14 AM ----------
@ Dr. Ketan just try to do via diffrent pc through smart switch. It happened to me to but on diffrent pc with 2-3 tries it restored.
Click to expand...
Click to collapse
Already three attemp made with 2 PCs
Just got message from other users who have bricked same way, Got a replacement under warranty.

dr.ketan said:
Already three attemp made with 2 PCs
Just got message from other users who have bricked same way, Got a replacement under warranty.
Click to expand...
Click to collapse
I know but do give multiple tries. It's time consuming but sure it will be success. And if u need offical firmware latest one BH6 XSG i have with m can upload on gdrive.

Thank you. I have already that firmware with me.

UK based firmware? Chain fire SuperSU?

UAE based dual SIM with tweaked CSC to use Jio Volte for indian users
Yes SuperSU

Does it include the new ota bhp7

drunkdino said:
Does it include the new ota bhp7
Click to expand...
Click to collapse
No. I believe H7 is 20MB and just security update only.

Good work mate :good: Might give it a try later if time permits when its uploaded. Still setting up my build environment. I haven't bothered doing much since Note 4 myself just some small little personal builds on my Note 5 but starting to get back in the mood

Reserved.