Hello everyone im gonna tell you how to root the samsung galaxy light sght399 by tmobile.
first download the file in the link below.
Root Galaxy Light SGH-T989.zip
Mod Edit: link removed
Extract it once and you should have 3 files. Put your samsung galaxy light in download mode
press volume down+home+power. Start up odin on your pc. Plug in galaxy light while its in download mode. Choose pda. Look for the twrp recovery file. Choose it and click start. It will install recovery when done move the supersu.zip to your sdcard and boot into recovery mode volume up+home+power go to install and go to where the zip file was moved and install it. Now your rooted with a custom recovery. Congratulations.
Member,
Your Odin exe contained Malware. Odin does not "install", normally you click the exe and it opens. It does not install on the PC. Your file installs, and adds malware to the PC.
Thread closed. If you get a clean odin file and want to reopen, please message me.
Darth
Forum Moderator
Related
*** Just to clear up things: This guide is targeted for i9100G version of S2 and should successfully work fine.
And not for i9100 international version of S2 <-- So trying this guide on a i9100 may brick your device ***
How to ROOT Galaxy S2 i9100G via Zip
Download : Root_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it.
Reboot
ClockWorkMod for Galaxy S2 i9100G
Download : CWM_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it
Now you will see the CWM recovery instead of Default Samsung Recovery mode
How to flash ROMS for Galaxy S2 I9100G via ODIN
Download ODIN > Odin3-v1.85.zip
Download Galaxy i9100G compatible PIT File > omap4_all_20110627_emmc.pit
Download Odin3-v1.85.zip > Open It!
ADD PIT File (omap4_all_20110627_emmc.pit) into ODIN > PIT.
Add Your ROM into ODIN > PDA
Turn Off your Phone first
Then goto Download mode by holding <Home+Power+Vol down>
Continue step of the Phone Screen.
Plug in the USB cable > You will notice ODIN recognize it by Yellow filled square .
Click "Start" of ODIN.
...... keep watching and praying for few mins! (hopefully 1-2mins)
... and voila! you just flashed your phone into a new ROM!
Enjoy!
Dont forget to Press THANKS button If this post helped you.
HTH
- Harsha
harshadura said:
How to ROOT Galaxy S2 i9100G via Zip
Download : Root_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it.
Reboot
ClockWorkMod for Galaxy S2 i9100G
Download : CWM_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it
Now you will see the CWM recovery instead of Default Samsung Recovery mode
How to flash ROMS for Galaxy S2 I9100G via ODIN
Download ODIN > Odin3-v1.85.zip
Download Galaxy i9100G compatible PIT File > omap4_all_20110627_emmc.pit
Download Odin3-v1.85.zip > Open It!
ADD PIT File (omap4_all_20110627_emmc.pit) into ODIN > PIT.
Add Your ROM into ODIN > PDA
......and just flash it!
Enjoy!
Dont forget to Press Thanks button If I helped you. Thanks!
-Harsha
Click to expand...
Click to collapse
we having it already dnt make wasteful thread
mod shuld close it
I have hosted those files again, anyway doesnt matter if its unnecessary close it.
harshadura said:
I have hosted those files again, anyway doesnt matter if its unnecessary close it.
Click to expand...
Click to collapse
we are tasting jelly n now u r telling us how to root lol
+1 no thanks
harshadura said:
How to ROOT Galaxy S2 i9100G via Zip
Download : Root_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it.
Reboot
ClockWorkMod for Galaxy S2 i9100G
Download : CWM_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it
Now you will see the CWM recovery instead of Default Samsung Recovery mode
How to flash ROMS for Galaxy S2 I9100G via ODIN
Download ODIN > Odin3-v1.85.zip
Download Galaxy i9100G compatible PIT File > omap4_all_20110627_emmc.pit
Download Odin3-v1.85.zip > Open It!
ADD PIT File (omap4_all_20110627_emmc.pit) into ODIN > PIT.
Add Your ROM into ODIN > PDA
......and just flash it!
Enjoy!
Dont forget to Press THANKS button If this post helped you.
-Harsha
Click to expand...
Click to collapse
Dear Harsha, Your efforts are really welcomed, however there are very detailed thread on how to Root GS2 (rather any ICS device).
http://forum.xda-developers.com/showthread.php?t=1746794
It may be posted elsewhere, but to a noob like me coming across this info seems real helpful, so thanks for your effort. My galaxy S2 is bricked and i'm trying to recover data - will this wipe my data do you know? Perhaps I could save my data via clockwork mod before I flash it with ODIN (if the flashing wipes data that is)? Thanks again
It is very useful to me coz it's for i9100g..
All i see from the link above is only for i9100
When I try to flash the zips in stock recovery , I get a signature failure.
Sent from my HTC VLE_U using xda premium
Please help
I put this file omap4_all_20110627_emmc.pit and clicked start with out Adding The ROM into ODIN > PDA
then the phone turned off and i've tried to opent it in many ways volume up or down + ok+ power and many put no response
My mobile doesnt works anymore
What happen with my mobile after I put this file omap4_all_20110627_emmc.pit and clicked start with out Adding The ROM into ODIN > PDA
then the phone turned off and i've tried to opent it in many ways volume up or down + ok+ power and many put no response
It can turn It on!!!!
I done cwm by this guide and it showing version 6.0.1.5 but 6.0.1.2 just got released... How come?
Sent from my GT-I9100G using Tapatalk 2
harshadura said:
How to ROOT Galaxy S2 i9100G via Zip
Download : Root_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it.
Reboot
ClockWorkMod for Galaxy S2 i9100G
Download : CWM_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it
Now you will see the CWM recovery instead of Default Samsung Recovery mode
How to flash ROMS for Galaxy S2 I9100G via ODIN
Download ODIN > Odin3-v1.85.zip
Download Galaxy i9100G compatible PIT File > omap4_all_20110627_emmc.pit
Download Odin3-v1.85.zip > Open It!
ADD PIT File (omap4_all_20110627_emmc.pit) into ODIN > PIT.
Add Your ROM into ODIN > PDA
Turn Off your Phone first
Then goto Download mode by holding <Home+Power+Vol down>
Continue step of the Phone Screen.
Plug in the USB cable > You will notice ODIN recognize it by Yellow filled square .
Click "Start" of ODIN.
...... keep watching and praying for few mins! (hopefully 1-2mins)
... and voila! you just flashed your phone into a new ROM!
Enjoy!
Dont forget to Press THANKS button If this post helped you.
-Harsha
Click to expand...
Click to collapse
Hello, my device is GT-1900P, locked by Orange. Which of the files will work for it?
Thanks for the tut......
Well, can't say this thread is useless.. I still afraid to root+cwm my device, just because red about brickbug+clockworkmod..
Maybe this tut summarize everything..
Sent from my Thoughts using Telepathy :banghead:
Hi, just starting out with rooting my phone so need a bit of help. When I try to use this root file on my i9100g with stock rom, ics 4.0.4, I get a E: Signature Verification Failed.
How do I get past this to install CWM Recovery?
Also, can I use this CWM to install other roms such as CM10
Can this be done though just CWM rather than go through Odin
harshadura said:
How to ROOT Galaxy S2 i9100G via Zip
ClockWorkMod for Galaxy S2 i9100G
Download : CWM_S2_i9100G.zip
Place it on the root of SD card.
Then goto Recovery mode by holding <Home+Power+Vol Up>
Select the Zip.
Install it
Now you will see the CWM recovery instead of Default Samsung Recovery mode
Click to expand...
Click to collapse
Is this method permanent. What I mean is will this method make CWM the default recovery? Or will I get the same old stock 3e recovery and have to install zip every time I want CWM?
Endritxx
dozzademiranda said:
What happen with my mobile after I put this file omap4_all_20110627_emmc.pit and clicked start with out Adding The ROM into ODIN > PDA
then the phone turned off and i've tried to opent it in many ways volume up or down + ok+ power and many put no response
It can turn It on!!!!
Click to expand...
Click to collapse
-I have the same problem to can send me a little help PLEASE ???
Great guide
stop hating
ICS_XD said:
we are tasting jelly n now u r telling us how to root lol
+1 no thanks
Click to expand...
Click to collapse
i am a beginner and flashing my Galaxy S2 for first time..this post helped me indeed...then why are tending him to remove the post..?
Originally Posted by dozzademiranda
What happen with my mobile after I put this file omap4_all_20110627_emmc.pit and clicked start with out Adding The ROM into ODIN > PDA
then the phone turned off and i've tried to opent it in many ways volume up or down + ok+ power and many put no response
It can turn It on!!!!
Click to expand...
Click to collapse
endritx said:
-I have the same problem to can send me a little help PLEASE ???
Click to expand...
Click to collapse
I too have had the same problem, how could you solve it?
Thanks
RECOVERY GUIDE
Flash signed recovery zip - Easiest way
1. The most common way is to simply flash Phil3759's Enhanced ClockWorkMod Touch.
2. Download the .zip file and copy it to your external sdcard
3. Then, reboot into the stock recovery (power off the phone and turn it on with home button and volume+ button pressed)
4. Choose "install zip from external storage" and select the already mentioned zip
5. Reboot. This should be enough!!
This is the easiest method, thus the followings are meant to be attempted only if you had problems with the previous
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Odin - If you have a computer available
1. If you have any errors try going back to the Phil Download Home and instead download the latest i9100 .tar.md5 file
2. Download Odin 1.85 and unzip the archive
3. Open the executable and add the previously downloaded .md5 into the PDA field
4. Put the phone into Download mode (power off the phone and turn it on with home button and volume- button pressed)
5. Connect it to the computer and wait till drivers installation is finished
6. Start flashing
7. (optional) If you want to remove the yellow triangle, check Chainfire's Triangle Away
Mobile Odin - When you have nothing but errors
0. You'll need Chainfire's Mobile Odin. Show him your gratitude and buy the app if you want! :laugh:
1. Root your phone. If that doesn't work, try "Xperia Root by cubeundcube"
2. Download Dorimanx Kernel (one of the .md5 packages)
3. Open Mobile Odin and grant it root permissions
4. "Open file" and select the .md5 file
5. Follow instructions and go!
Reserved.
I would like to point out i made yet another guide for gs2, because yesterday I went to "unlock" my mum's i9100 and I had a very time
If somebody wrote a more comprehensive guide, sorry i miss it
hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed
you make a nandroid backup bevor?
Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com
Same problem x2
In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat
Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me
Hi guys,
This is my first post on xda, i want to root my samsung s5 but after doing alot of research i understand that there is a high risk that my device can be bricked. In order to root my device i know i have:
1. drag and drop --------------------------------------------------------download.chainfire.eu/693/SuperSU/BETA-SuperSU-v2.44.zip into my device
2. download and install odin ----------------------------------------odin3.en.lo4d.com/[/url]
3.enable usb debugging
4. volume power and menu button to gain recovery mode
5.run odin and select AP then browser for TWRP FILE
6. Twrp file downloaded from here -------------------------------techerrata.com/browse/twrp2/klte
once install boot into recovery once again and load twrp then select to install supersu
this is the process that i am aware of but in respect i am nervous to brick my device, can anyone provide additional information or advice?
Regards
dexter_17 said:
Hi guys,
This is my first post on xda, i want to root my samsung s5 but after doing alot of research i understand that there is a high risk that my device can be bricked. In order to root my device i know i have:
1. drag and drop --------------------------------------------------------download.chainfire.eu/693/SuperSU/BETA-SuperSU-v2.44.zip into my device
2. download and install odin ----------------------------------------odin3.en.lo4d.com/[/url]
3.enable usb debugging
4. volume power and menu button to gain recovery mode
5.run odin and select AP then browser for TWRP FILE
6. Twrp file downloaded from here -------------------------------techerrata.com/browse/twrp2/klte
once install boot into recovery once again and load twrp then select to install supersu
this is the process that i am aware of but in respect i am nervous to brick my device, can anyone provide additional information or advice?
Regards
Click to expand...
Click to collapse
Which model u have?
Model number is : sm-g900f
android version : 6.0.1
anyone?
I flashed this http://forum.xda-developers.com/showthread.php?t=2696537. Gained Root, flashed a Custom Rom then flashed TWRP Img through recovery. Worked for me.
Sent from my SM-G900F using XDA-Developers mobile app
This is a guide to an untested yet possible method of rooting the Samsung J330L
So far I have been able to install Clockwork mod successfully and wanted to share my findings.
(links at the end of page)
NOTE: I take no credit for creating/editing the files listed below
*IF you follow this guide you may void your warranty*
*I am not responsible or liable for any damages while following or attempting to follow this guide*
The Korean variant of the J3 is relatively easy to install CWM.
You first must install, as with any Samsung device, Odin.
You should be able to download the latest Odin from there web page below
Secondly you need a 2017 firmware set for the j330L both to do the installation and to flash if anything goes wrong.
After installing Odin and extracting the .tar files you will need to put you phone in download mode by pressing and holding the home vol- and power keys
when you get a blue screen hit vol+. You should be in download mode.
Connect your phone to your computer and open Odin. You will need to install the BL AP CP and CSC files. (For the CSC file use the HOME file)
reboot and boot back into download mode
Flash the recovery.tar in the AP slot.
Reboot to recovery by holding down Home power and vol+
----Past this point i have had no success flashing magisk or super SU so I am currently working on flashing a ROM for root(causes boot loop)
---------------------------------------------Suggestions and help is welcome----------------------------------------------------------------
Odin: (https://odindownload.com)
Firmware: (https://www.theandroidsoul.com/samsung-galaxy-j3-firmware)
CWM: (https://forum.xda-developers.com/galaxy-j3-2017/how-to/cwm-recovery-sm-j330f-t3674449)
zen_hakuren said:
This is a guide to an untested yet possible method of rooting the Samsung J330L
So far I have been able to install Clockwork mod successfully and wanted to share my findings.
(links at the end of page)
NOTE: I take no credit for creating/editing the files listed below
*IF you follow this guide you may void your warranty*
*I am not responsible or liable for any damages while following or attempting to follow this guide*
The Korean variant of the J3 is relatively easy to install CWM.
You first must install, as with any Samsung device, Odin.
You should be able to download the latest Odin from there web page below
Secondly you need a 2017 firmware set for the j330L both to do the installation and to flash if anything goes wrong.
After installing Odin and extracting the .tar files you will need to put you phone in download mode by pressing and holding the home vol- and power keys
when you get a blue screen hit vol+. You should be in download mode.
Connect your phone to your computer and open Odin. You will need to install the BL AP CP and CSC files. (For the CSC file use the HOME file)
reboot and boot back into download mode
Flash the recovery.tar in the AP slot.
Reboot to recovery by holding down Home power and vol+
----Past this point i have had no success flashing magisk or super SU so I am currently working on flashing a ROM for root(causes boot loop)
---------------------------------------------Suggestions and help is welcome----------------------------------------------------------------
Odin: (https://odindownload.com)
Firmware: (https://www.theandroidsoul.com/samsung-galaxy-j3-firmware)
CWM: (https://forum.xda-developers.com/galaxy-j3-2017/how-to/cwm-recovery-sm-j330f-t3674449)
Click to expand...
Click to collapse
CWM is dead.
Your device should be able to rooted using TWRP or use Magisk manager to root the boot image.
https://forum.xda-developers.com/ga...overy-twrp-3-1-1-1-samsung-galaxy-j3-t3709056
True but at the time of posting TWRP causes boot loop. I haven't tried the TWRP version that you posted tho. I will give it a shot.
Ok After much testing i have successfully rooted the damn thing with the twrp installation above and the latest Super User but installing magisk or installing a custom rom now causes bootloop. This damned phone is irritating AF but root does work.... now i need to find out how remove my kernel so i can base a rom off it