Database Users

Rootin Tootin...nothing

Hello,
I am trying to root my GT P7510, so I can allow it to accept ad hoc wifi connections.
So I tried this link from Android Authority called "How to Root the Samsung Galaxy Tab 10.1 WiFi GT-P7510" ( I can't post links yet).
Anyhoo - did all the steps...and nothing. No errors. A screen said it was done and gave credits. I tried to root check apps - both came up negative.
I tried these steps twice (see full below):
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
It says for "Samsung Galaxy Tab 10.1 GT-P7510 WiFi-only (Retail)" which is the version I have (16GB). Anything else I should check for?
Suggestions as to why it failed?
Where should I look? Running Android 4.04, Kernel 3.1.10. Any more info required? Any place I should be looking for a better way to do this?
Thanks,
V
Follow these:
Instructions
Download all the files you need as one package. Get the package here or here.
Extract the contents of the ZIP file into a folder on your computer. You’ll be getting the following components after extracting:
GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe
hc-3.1_ota-full_sam_tab_10.1.zip (Stock ROM) — Copy this to your tablet’s internal storage so that you will have a backup copy of your stock ROM in case you want to revert to it at some future date.
Odin3_v1.85.exe
recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
stockretail.tar.md5 (stock recovery)
Samsung_Galaxy_Tab_10.1_root.zip
Install the USB drivers for the Galaxy Tab 10.1 (GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe). Or, you can install the drivers by installing Samsung KIES.
Enable USB Debugging on your tablet.
Turn off your tablet.
Reboot the tablet into Download Mode, as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Press the Volume Up button to go into Download Mode.
Run Odin3 on your computer.
Connect your tablet to your PC.
Click the PDA button in Odin3 and load “recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5″.
Under “Option”, check only “Auto Reboot” and “F. Reset Time.” Leave the other options unchecked.
Click the Start button in Odin3. Wait until Odin3 tells you that the process is successful.
Reboot your tablet.
Disconnect the tablet from the PC.
Turn off (disable) USB Debugging on the tablet.
Connect the tablet again to the PC. Choose “USB Mass Storage” as connection type.
Copy “Samsung_Galaxy_Tab_10.1_root.zip” to your tablet and take note of where you copied the file.
Disconnect the tablet from the PC.
Turn off the tablet.
Reboot into recovery as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Select Recovery from the options.
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
Reboot into normal mode.
Voila! Your Samsung Galaxy Tab 10.1 WiFi GT-P7510 is now rooted.

FYI - I did upgrade my version of android from 3.1 to 4.04 - does an upgrade - remove root access? Do I need a .zip file for ICS?
Thanks,
V
vivekvp said:
Hello,
I am trying to root my GT P7510, so I can allow it to accept ad hoc wifi connections.
So I tried this link from Android Authority called "How to Root the Samsung Galaxy Tab 10.1 WiFi GT-P7510" ( I can't post links yet).
Anyhoo - did all the steps...and nothing. No errors. A screen said it was done and gave credits. I tried to root check apps - both came up negative.
I tried these steps twice (see full below):
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
It says for "Samsung Galaxy Tab 10.1 GT-P7510 WiFi-only (Retail)" which is the version I have (16GB). Anything else I should check for?
Suggestions as to why it failed?
Where should I look? Running Android 4.04, Kernel 3.1.10. Any more info required? Any place I should be looking for a better way to do this?
Thanks,
V
Follow these:
Instructions
Download all the files you need as one package. Get the package here or here.
Extract the contents of the ZIP file into a folder on your computer. You’ll be getting the following components after extracting:
GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe
hc-3.1_ota-full_sam_tab_10.1.zip (Stock ROM) — Copy this to your tablet’s internal storage so that you will have a backup copy of your stock ROM in case you want to revert to it at some future date.
Odin3_v1.85.exe
recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
stockretail.tar.md5 (stock recovery)
Samsung_Galaxy_Tab_10.1_root.zip
Install the USB drivers for the Galaxy Tab 10.1 (GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe). Or, you can install the drivers by installing Samsung KIES.
Enable USB Debugging on your tablet.
Turn off your tablet.
Reboot the tablet into Download Mode, as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Press the Volume Up button to go into Download Mode.
Run Odin3 on your computer.
Connect your tablet to your PC.
Click the PDA button in Odin3 and load “recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5″.
Under “Option”, check only “Auto Reboot” and “F. Reset Time.” Leave the other options unchecked.
Click the Start button in Odin3. Wait until Odin3 tells you that the process is successful.
Reboot your tablet.
Disconnect the tablet from the PC.
Turn off (disable) USB Debugging on the tablet.
Connect the tablet again to the PC. Choose “USB Mass Storage” as connection type.
Copy “Samsung_Galaxy_Tab_10.1_root.zip” to your tablet and take note of where you copied the file.
Disconnect the tablet from the PC.
Turn off the tablet.
Reboot into recovery as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Select Recovery from the options.
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
Reboot into normal mode.
Voila! Your Samsung Galaxy Tab 10.1 WiFi GT-P7510 is now rooted.
Click to expand...
Click to collapse

You need to update Superuser. Go to the Superuser site Here and download 3.1.3 ARM signed. Save it on your tablet's root, go into recovery, flash it and reboot...you should be fine after that. Come on back and let us know you're OK when you're done.

And guess what...it is Android verions specific....so Galaxy Tab Hacks .com helped me to do it.
Hopefully this thread helps someone else....
/galaxytabhacks.com/galaxy-tab-10-1-root/how-to-root-ics-on-galaxy-tab-10-1/
Thanks,
V
vivekvp said:
Hello,
I am trying to root my GT P7510, so I can allow it to accept ad hoc wifi connections.
So I tried this link from Android Authority called "How to Root the Samsung Galaxy Tab 10.1 WiFi GT-P7510" ( I can't post links yet).
Anyhoo - did all the steps...and nothing. No errors. A screen said it was done and gave credits. I tried to root check apps - both came up negative.
I tried these steps twice (see full below):
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
It says for "Samsung Galaxy Tab 10.1 GT-P7510 WiFi-only (Retail)" which is the version I have (16GB). Anything else I should check for?
Suggestions as to why it failed?
Where should I look? Running Android 4.04, Kernel 3.1.10. Any more info required? Any place I should be looking for a better way to do this?
Thanks,
V
Follow these:
Instructions
Download all the files you need as one package. Get the package here or here.
Extract the contents of the ZIP file into a folder on your computer. You’ll be getting the following components after extracting:
GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe
hc-3.1_ota-full_sam_tab_10.1.zip (Stock ROM) — Copy this to your tablet’s internal storage so that you will have a backup copy of your stock ROM in case you want to revert to it at some future date.
Odin3_v1.85.exe
recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
stockretail.tar.md5 (stock recovery)
Samsung_Galaxy_Tab_10.1_root.zip
Install the USB drivers for the Galaxy Tab 10.1 (GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe). Or, you can install the drivers by installing Samsung KIES.
Enable USB Debugging on your tablet.
Turn off your tablet.
Reboot the tablet into Download Mode, as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Press the Volume Up button to go into Download Mode.
Run Odin3 on your computer.
Connect your tablet to your PC.
Click the PDA button in Odin3 and load “recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5″.
Under “Option”, check only “Auto Reboot” and “F. Reset Time.” Leave the other options unchecked.
Click the Start button in Odin3. Wait until Odin3 tells you that the process is successful.
Reboot your tablet.
Disconnect the tablet from the PC.
Turn off (disable) USB Debugging on the tablet.
Connect the tablet again to the PC. Choose “USB Mass Storage” as connection type.
Copy “Samsung_Galaxy_Tab_10.1_root.zip” to your tablet and take note of where you copied the file.
Disconnect the tablet from the PC.
Turn off the tablet.
Reboot into recovery as follows: hold down the Volume Down and Power buttons. Release the two buttons once you see the two icons on the tablet’s screen. Select Recovery from the options.
In recovery mode, choose “Install zip from sdcard,” then “Choose zip from sdcard,” locate and select “Samsung_Galaxy_Tab_10.1_root.zip”, and finally confirm flashing the ZIP file.
Reboot into normal mode.
Voila! Your Samsung Galaxy Tab 10.1 WiFi GT-P7510 is now rooted.
Click to expand...
Click to collapse

Yep, that works too. Only difference is this guy's root zip contains SuperSU rather than Superuser. Either way works congratulations, you're rooted!

djmatt604 said:
Yep, that works too. Only difference is this guy's root zip contains SuperSU rather than Superuser. Either way works congratulations, you're rooted!
Click to expand...
Click to collapse
I was struggling with a similar issue, the Superuser root failed in spite of repeated attempts. This one worked first try!

thanks vivekvp, this tutorial WORKS!
for others, be sure to run supersu after and grant what you want

No go
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> recovery-CWM5504-P4-P7500.tar.md5 is invalid.
<OSM> End...
Gives me invalid MD5.
Problem solved! Renamed to recovery-CWM5504-P4-P7500.tar
Installed fine, and the root worked fine as well. All good, and thanks.

Yippee
Thanks heaps vivekvp. I've rooted my tablet about 20 times, managed to soft brick it in the process, restored the firmware and still had no SU privileges until I found this thread. This is would appear is all I required in the first place. I can now get su working and can copy up DB's I require for development purposes.
Thanks a bundle.:good:

[WIFI Only] LATEST STOCK ROM (KPO) ROOT GUIDE

This is similar but not same http://forum.xda-developers.com/showthread.php?t=2088427 BK201EKY' s guide
the difference you will get the non-touched latest stock rom rooted and cwm recovery enabled.
(this means no visual and other modifications, pure stock rom & rooted & cwm installed)
What we need?
1. Latest stock rom "P1010KPO_P1010XEUKPO_HOME.tar.md5"
Download from : http://www.sammobile.com
2. Root and CWM for KPI Rom "madteam-cwm-p1010-kpi.tar"
Download from madteam: http://sourceforge.net/projects/jbro...i.tar/download
3. Wifi Fix for KPO rom "wifi.zip"
Download form: https://www.dropbox.com/s/n69ulrcts1h7ue2/wifi.zip
(This file need to be pasted to fix Wifi error after the madteam-cwm-p1010-kpi.tar flashed on KPO ROM - how to explained in the step)
4. Odin and USB drivers if you need
For odin: http://sourceforge.net/projects/jbro...1.zip/download
For USB drivers: http://hotfile.com/dl/133929348/9107...300_0.zip.html
Steps:
1. Flash the latest KPO rom with odin.
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the "P1010KPO_P1010XEUKPO_HOME.tar.md5 file then click start and wait for the tablet boots and home screen shows
2. Download and install es file manager from play store
3. Create a folder Extract the wifi zip into a sd-card then instert the card to your tablet (or use internal memory)
4. Flashing the KPI rooted kernel and CWM
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the madteam-cwm-p1010-kpi.tar file then click start and wait for the tablet boots and home screen shows
5. Run ES file manager and get the root access, (get the RW access "/" and "/system" )
6. Copy& paste the extracted files in step 3 to te /system/etc/wifi (replace files when asked)
7. reboot your tablet and now you have non touched stock rom, rooted, cwm installed and wifi error fixed.
if duplicated sorry. İ searched but not found a root methot for the KPO rom without any modifications, then found the non-english sites for the wifi.zip trick and it worked for me then i want to share.... :good:

Xposed framework for GB devices can be found here --> http://forum.xda-developers.com/showpost.php?p=44034334

stock kernel on S6 edge+?

hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed

you make a nandroid backup bevor?

Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com

Same problem x2

In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat

Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me

How to install Stock MM Successfully (Odin) In J700F

First and most important thing for installing/upgrading to Stock MM is clean install (even for Odin flash). That`s why we need a WIPED device. And if you fellow this step, then hopefully you`ll never get any issues (bootloop, abnormal battery drain etc). and this is for rooted devices with custom recovery (TWRP).
I always follow these setps.
DO it at your own risk.
1. Go to TWRP Recovery mode (by pressing volume up + power + home button)
2. Enter in Wipe menu
3. Advance wipe
4. Tick Cashe,Data, System, Internal Storage (except external storage/ Micro SD Card) and swipe to wipe.
5. Go to Reboot menu.
6. Power off the device. (Ignore " No OS Installed " message).
7. Open back cover and pull out Sim cards and Memory card(if any).
8. Download Odin ( I use v.3.11.1).
http://forum.xda-developers.com/showthread.php?t=2711451
9. Install essential drivers for your device in your PC/Laptop..
10. Download Stock MM (latest) Firmware for your Device from sammobile.
http://www.sammobile.com/firmwares/database/SM-J700F/
11. Extract (.tar.md5) it in Odin folder.
12. Go to Download Mode (volume down + power + home button and then volume up)
13. Open odin
14. Connect your device with Original Usb cable.
15. Odin will say "Added" once you connected your device. If not, then check all the drivers and Usb cable.
16. In Odin, make sure "Auto Reboot " and "F. Reset Time" options are Ticked.
17. And make sure "Re Partition" option is not ticked Or marked (checke twice). Don`t touch any other options in Odin.
18. Click on "AP" tab and select the firmware you extracted earlier for your device (.tar).
19. check again everything.
20. If everything is OK. then click on "Start" and sit back.
Odin will display "PASS", when it completed.
And your device will reboot.
After setting your device, power off your device and insert Sim cards (must) and Memory card (optional).
Switch on your device.
Here you can check for the latest software update for your device again. If any update is available, it`ll ask for download and install the latest OS. you should install this update (if available) with wifi/data connection. I`ve installed the latest "J700FXXU2BPG3_J700FODD2BPF9_INS.zip" and after setting the device for the first time, it asked for the OS update again. I downloaded and installed the update and it was "BPH2" with "August Security Patch".. And now I`ve "BPH2" in my device. And I think this the latest update from samsung for J700F.
AND AFTER THAT YOU SHOULD DO FACTORY RESET.
Now you can setup your device according to your wish. And enjoy new stock MM.
These are the steps , I always follow when installing /upgrading any samsung device and really it always provides a very stable and smooth performance.
I just share my procedures.Hope it helps.

HOW TO INSTALL TWRP RECOVERY IN MM J700F
----------------------------------------------------------------------
I`ve installed TWRP in J700F in MM successfully through this procedures.
I just share. Hope it helps.
Do it at your own risk.
1. Download Odin (I use v.3.11.1).
2. Download TWRP for samsung galaxy J7 (Just google it and you`ll find).
3. Open odin
4. Make sure only "F. Reset Time" option is ticked/marked. Here you should untick all options except "F. Resaet Time" ( "Auto Reboot" option should be unticked). And "Re-Partion" option must be unticked. Don`t touch any other options in Odin.
5. Switch off your device
6. Go to Download mode in your device
7. Click on "AP" tab and select "twrp-3.0.2-0-j7elte.img.tar".
8. Check again everything.
9. If everything is OK, then click on "Start".
10. Odin will display "PASS', when it completed.
11. After that unplug your device from PC and press volume down + power button and let your device reboot forcefully. Release volume down button and press volume up + home button as soon as you see the black screen. And your device should now be in TWRP mode.
Now you`ve TWRP in your device.
And Make a Nandroid backup first (it`s for future and safety).

HOW TO ROOT J700F IN STOCK MM
---------------------------------------------
You`ve install latest Stock MM and latest TWRP Recovery in your device successfully. Now you can root your device (certainly if you want).
I`ve rooted my J700f successfully (latest "BPH2" with "August Security Patch") with this procedure.
Do at your own risk.
1. Download Chainfire superSu ( I use BETA-SuperSU-v2.77-20160827190633.zip) and it will give you systemless root ( if you want to learn about systemlees root , here you go
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
2. Copy supersu.zip in your sd card
3. Go to TWRP
4. Select SuperSu.zip and Flash.
5.Reboot your device, when it completted.
And your device is now rooted and you`ll find SuperSu app in your app drawer. You can check rooting status with Root Checker App from google PlayStore.

HOW TO INSTALL XPOSED IN J700F IN STOCK MM
-------------------------------------------------
You can install Xposed in your device (J700F) in stock MM.
I`ve installed xposed in my J700F in Stock MM successfully.
Do it at your own risk.
1. Download "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip", " xposed-uninstaller-20150831-arm.zip" and "XposedInstaller_3.0_alpha4.apk".
Please follow this thread :
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2. copy all the files in your sd-card.
3. Install "XposedInstaller_3.0_alpha4.apk" normally.
4. Switch off your device.
5. Go to TWRP.
6. Select "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip" and flash.
7. Reboot your device when it completted.
It`ll take some times to boot your device. After booting, you`ll find Xposed app in your app drawer. Install Modules according to your requirement and compatibility. And enjoy.

Unable to root my Samsung j5

Followed all steps to root phone.
But odin displays Fail (Auth) error. Not sure how to root my phone

Hello. I did root my phone few days ago using Odin, I can help you.
What do you need:
SuperSU ZIP File (For your Android version, to check in Settings -> About device) and copy it to phone memory
TWRP Recovery MD5 File (for Odin) (for your phone model, check in Settings -> About device)
Now steps:
1. Enable OEM Unlock in Developer Options (If not unlocked, Settings -> About device -> Tap "Build Number" 7 times)
2. Open Odin and select AP (maybe PDA)
3. Find your TWRP File and select it
4. Turn off your phone, go to Download Mode (Volume Down, Home and Power buttons), click Volume Up (once)
5. Connect your device to your PC (In Download Mode you need to see Odin Mode!)
6. If in Odin you have seen "Added!" click Start
7. If Odin will fail, try again (I needed to)
8. If you have already flashed TWRP, go to it (Volume Up, Home and Power buttons)
9. Go to Wipe option and swipe to do default wipe.
10. Now click Install, select your SuperSU file.
11. Swipe to do it (Zip authentication disabled!!!!)
12. After it's done, reboot your phone again to your OS.
13. Enjoy your new root!
Optional Step: download Root Checker from Google Play and check your root.
I hope I did help you.