This thread will always be a Work In Progress. Please be patient, as we receive new development it will be posted here. Thank you very much!
Do subscribe to this thread to get notified on any new updates.
If you own a G3, please proceed to this thread instead: http://forum.xda-developers.com/lg-g3/general/guide-complete-tutorial-to-root-flash-t3098959
Own a V10? Proceed to this thread: http://forum.xda-developers.com/lg-v10/general/wip-complete-guide-to-v10-t3217373
First things first, this guide is made mainly for our great LG G4 D815. Some steps may or may not work for other phones...
Please note that the results of the following methods may vary. I would advice you don't do this on a daily driver or corporate phone.
Also note that these steps WILL VOID YOUR WARRANTY. PROCEED AT YOUR OWN RISK.
For increased chances of these working, update your KDZ to Lollipop first using OTA or Flash Tool.
If you don’t know what rooting, flashing and blah blah blah means, this probably isn’t the thread for you.
I do not own much of this stuff, credit really does go to the folks stated below. Do give them a shoutout!
Enjoy!
Complete guide to all things G4:
NOTE: The chapters are in chronological order, meaning everything after Chapter 2 assumes you already have root and unlock.
---------------------------------------------------------------------------------------------------------------------------------
CHAPTER 0: TERMINOLOGY (in my own words)
- Terms
- Tidbit
(To be honest, if you need to even look at this, this thread isn't for you.)
- Root: Gaining full administrative control of your device. "Jailbreaking" in terms of Android.
- ROM: The customized operating system that your Android runs on.
- Kernel: The thingy that links software and hardware
- Radio: The thingy that sends and receives messages, calls and data.
- Flash: Installing a zipped file in Recovery Mode
- Recovery: The software that allows tweaking and flashing, and other weird stuff that will destroy your phone.
- Fastboot: The thingy that allows recovery mode to happen.
- Brick: The term says it all.
- Bootloader: Quite literal; loads the phone for bootup.
- Nandroid backup: A backup-ed image of your current system
- ADB: Android Debug Bridge; some command line tool that sends information from and to the phone to, and from the computer
- CWM: ClockWorkMod; a recovery system
- XDA: The holy website that is full of weird stuff that makes your phone wayyyy better.
Now let's paint a picture:
Imagine you are your Android phone.
Before "rooting", you are trapped in jail.
Upon "rooting and unlocking", you are released from jail.
You go to a shopping mall named "XDA".
You find a credit card lying on the floor from the company "Recovery". On the back, it says there is no passcode required, and there is a infinite amount of money inside.
You enter a store and get a sweatshirt with the word "ROM" on it.
You didn't buy the shirt, the shirt just happens to be free, but still requires you to swipe your credit card anyways.
You keep the receipt as a "backup", just in case the shirt spoils.
Just then, you get greedy and get all the badges in the store.
Stupidly, you pin all the badges on your shirt, turning it as heavy as a "brick".
Then, the shirt rips, unable to put (it rhymes with boot) it back together again.
Luckily you still have the receipt to return the shirt, and return back to your good old disgusting shirt.
---------------------------------------------------------
CHAPTER 1: PREREQUISITES
- The newest LG drivers are installed on your computer
- A proper and working Wi-Fi network
- Enable Developer Options
- Enable USB Debugging
- Ensure G4 is charged to at least 50%
- Original and genuine LG G4 in-box USB cable
- Backup all files!
---------------------------------------------------------
CHAPTER 2: ESSENTIALS
- Backup
- Unlock
- TWRP
- Flashing
- Restoring Backup
BACKUP:
Titanium Backup Method:
Use “Titanium Backup” batch backup
1. Menu -> Batch
2. Run -> Backup user apps + system data
OR:
Manual Non-Root Method:
- Messages: “SMS Backup & Restore”
- Contacts: should be synced with the cloud, if not: Export to SIM card or SD card
- Calendar: should be synced with the cloud
- Notes: use “Google Keep”, it will be synced with the cloud
- User Dictionary: “User Dictionary Backup”
- Call Logs: “Call Logs Backup & Restore”
- Launcher (assuming you use Nova Launcher): Settings -> Backup & import settings -> Restore or manage backups
- Apps: “Helium” or any other app
- Nandroid Backup
store all backups in external SD card or transfer to your computer
UNLOCK BOOTLOADER (official!):
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryTypeCode=ANRS
(direct link from LG Developer Resource Center!)
NOTE: THIS CANNOT BE UNDONE!
TWRP Touch Recovery:
http://forum.xda-developers.com/g4/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3125859
(kudos to @Dees_Troy & TeamWin)
1. Download "TWRP Manager" app from the Google Play Store
2. Advanced -> Install Recovery
3. DONE!
FLASHING:
Clean Flash:
1. Backup your data!
2. Reboot into TWRP Recovery
3. Go into settings and enable “Use Aroma File Manager”
4. Wipe Dalvik, Cache, System & Data
5. Flash your chosen ROM, basebands, firmware updates and other crap
6. Flash any GApps package. (the one I use: http://forum.xda-developers.com/android/general/gapps-lp-gapps-pa-gapps-aroma-installer-t3010798; kudos to @raulx222 & @slim Team)
7. Flash anything else (e.g. frameworks, boot animations, splash screens, themes etc.)
8. Reboot
9. DONE!
OR:
Dirty Flash: (flashing without wiping anything, used for updating to newer ROMs or reflashing)
1. Reboot into TWRP Recovery
2. ONLY wipe Dalvik Cache
3. Flash your chosen ROM, basebands, firmware updates and other crap
4. Flash any NEWER GApps package. If you manually installed/updated through Play Store, skip this step.
5. Flash anything else (e.g. frameworks, boot animations, splash screens, themes etc.)
6. Reboot
7. DONE!
It is perfectly fine if the first bootup takes a while, that is perfectly normal. Upon boot, Android will optimize itself so just let it do it’s work. Do put the phone under a fan as it does tend to get hot when optimizing since it is at max brightness or some dumb reason.
If it takes ages (like over 5-10mins) to boot up, it means you have luckily bricked your phone! Do source the XDA indices for any unbricking tutorial, or keep a lookout for an update on this page for instructions. (I don’t have any/don’t need to find any as I have never bricked any Android, so ya.)
Click to expand...
Click to collapse
DO NOT dirty flash if your newer ROM:
- Doesn't allow/support it
- Has a major update
- Has a Android version jump (e.g. from Lollipop to M)
- Is a totally different ROM from the previous one (e.g. from Stock to Cyanogenmod)
If after dirty flashing you experience any ROM issues (e.g. battery drain, lag etc.), I would advice you to do a clean flash instead.
Click to expand...
Click to collapse
RESTORING BACKUP:
Titanium Backup Method:
1. Use “Titanium Backup” batch restore
2. Menu -> Batch
3. Run -> Restore missing apps with data (*NOTE*: DO NOT RESTORE SYSTEM DATA)
4. Once done, go to Backup/Restore on the main app interface
5. Restore manually: Calendar Storage, Internet Bookmarks, Messaging SMS/MMS Prefs, Phone SMS/MMS/APN, User Dictionary, Wi-Fi Access Points**
6. Launcher Settings: (assuming you use Nova Launcher) Settings -> Backup & import settings -> Restore or manage backups
**What can I manually restore?**
Red: DO NOT RESTORE, YOU’LL END UP BRICKING/BOOTLOOPING YOUR PHONE!!!
White: 99% safe, go ahead
Green: 70% safe, beware of potential brick
Grey Stirkethrough: DO NOT RESTORE
Click to expand...
Click to collapse
OR:
Manual Restoration Method:
- Messages: “SMS Backup & Restore”
- Contacts: should be synced with the cloud, if not: Export to SIM card or SD card
- Calendar: should be synced with the cloud
- Notes: use “Google Keep”, it will be synced with the cloud
- User Dictionary: “User Dictionary Backup”
- Call Logs: “Call Logs Backup & Restore”
- Launcher (assuming you use Nova Launcher): Settings -> Backup & import settings -> Restore or manage backups
- Apps: “Helium” or any other app
store all backups in external SD card or transfer to your computer
---------------------------------------------------------
CHAPTER 3: ADDITIONS
- Temporary fix for Stagefright exploit
- Weather Widget
- XPosed
- Boot Animation
- TWRP Recovery Theme
- ExoPlayer for YouTube
- Ad-free
- Control
- Enhanced LG Touch Assistant
- Task Management
Temporary fix for 'Stagefright' exploit
Now, as we wait anxiously for our beloved OEMs to slowly update their softwares to patch for Stagefright, we are still vulnerable... UNTIL NOW! Here's a temporary protection for us, living in the slow ring of OTAs:
1. Open your messaging app.
2. Open your messenger's settings.
3. Disable "Auto receive MMS".
4. Repeat for all your other messaging apps.
5. DONE!
- If you're plainly lazy, download "Textra" messaging app which comes with in-built Stagefright protection!
Get G4's Weather Widget on ANY Launcher! (unofficial - Zooper theme)
My Official Thread: http://forum.xda-developers.com/android/apps-games/lg-g4-s-weather-widget-launcher-phone-t3135381
Here's how to get the UNOFFICIAL G4's weather widget on ANY launcher, including Smart Notice.
These steps do require paid apps, so as to prevent piracy, I will not provide download links for these apps.
1. Download "Zooper Widget Pro" from the Play Store. *note: it must be PRO to make it work*
2. Download "UX 4.0 G4 for Zooper" from the Play Store.
3. Add a 4x2 Zooper Widget to any home screen.
4. Tap the widget to start.
5. Choose "UX 4.0 by N.A Dev".
6. Scroll down and choose "5x2 UX 4.0 Smart Notice."
7. Widget OnTap Action -> App List -> Weather App
8. Location -> Choose accordingly
9. Global Preferences -> Weather Provider -> Yahoo!
10. Calendar to display -> Deselect all events
11. Check the 1st Rich Text (it should be "Rect, W:388 H:192 R:0")
- Tap the pencil edit icon (most top right)
- Module OnTap -> App List -> Weather
12. Check the 2nd Rich Text ("Rect, W:400...")
- Edit
- Module -> Shortcuts -> Activities -> Smart Notice
13. Rich Text: (date, e.g. Monday, 15 June)
- Edit
- X Offset 181, Y Offset -5
- Module -> App -> Calendar
- Edit Text Manually -> Remove what's there and type this in: #DEEEE#, (enter next line) #DMMMM d#
- Lines -> 2
14. Rich Text: (location)
- X Offset -186, Y Offset -30
- Module -> App -> Maps
- Edit text manually -> Remove what's there and type this in: @ #LLOC#, (enter next line) #LCN#
- Lines -> 2
15. Rich Text: (updated on (time))
- Edit text manually -> Remove what's there and type this in: #BSTAT#: #BLEV#, #BTEMP#, #BLEFT#
16. Rich Text: "]"
- Blur 0
17. Add a Rich Text
- X Offset 0, Y Offset 4
- Edit text manually -> Remove what's there and type this in: #WCCOND#
- Size 14
18. Go back
19. Turn on Wi-Fi/Data & Location Services (if needed) & Force Update
20. Save
21. Quit Zooper App
22. Go to your home screen and tap "Refresh button".
23. Finally done!!
- Do remember to put Zooper on the Ignore List for any battery or task killer app!
---------------------------------------------------------
FAQ:
- Any battery impacts?
Shouldn't be, so long as you follow the steps correctly.
- What if my weather shows "??" or "Unknown"
Go into the Widget Settings and Force Update
- My location isn't accurate!
Manually tell the widget your location, don't use auto.
- The weather isn't accurate!
For now, there's no choice as it isn't powered by the all mighty Google or AccuWeather.---------------------------------------------------------
XPOSED FRAMEWORK:
http://forum.xda-developers.com/showthread.php?t=3034811
(kudos to @rovo89)
1. Download “xposed-sdk21-arm-2015xxxx.zip” and flash in recovery
2. Download “XposedInstaller_3.0-xxxx.apk” and install normally
3. Download your favourite modules from the XDA indices
4. Open Titanium Backup app and freeze “LG QuickCover”
5. DONE!
BOOT ANIMATION:
6.x Marshmallow:
https://www.copy.com/s/t%3A83YzqkU0VlAHdSsY%3Bp%3A%252Fbootanimation-flashable.zip%3Boid%3A400
(kudos to @Upstreammiami)
(flashable)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” to “bootanimation.old”
5. Download “bootanimation-flashable..zip” and flash in recovery
6. DONE!
5.x Lollipop:
(if not flashable)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” and “shutdownanimation.zip” to “bootanimation.old” and “shutdownanimation.old” respectively
5. Copy your boot animation and shutdown animation of choice and rename to “bootanimation.zip” and “shutdownanimation.zip” respectively
6. Change permissions to rw-r-r-T (Read Owner, Read Group, Read Others, Write Owner, Sticky)
7. Mount R/O
8. Reboot
9. DONE!
TWRP Recovery Theme
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
(kudos to @z31s1g)
1. Choose 1440x2560 Themes Folder
2. Download your chosen zip file to your device
3. Change "28xX_vx_1440_xxxx.zip" to "ui.zip"
4. Open your favourite file manager app
5. Go to the TWRP folder
6. Create a folder named "theme" **no capital letters!**
7. Copy "ui.zip" into this folder
8. Reboot to recovery
9. DONE!
Faster YouTube: ExoPlayer
http://r3pwn.github.io/yt-exoplayer.html
1. Download “Root Explorer” app
2. Go to data/data/com.google.android.youtube/shared_prefs
3. Add the following lines below "<map>":
<string name="exo_player_activation_type">ADAPTIVE</string>
<boolean name="enable_exo_cache" value="true"/>
<boolean name="show_exo_player_debug_messages" value="true"/>4. Once done, close and mount R/O
5. Force Close YouTube app in Application Settings
6. Reboot
7. Done!
Ad-Free
- Download "AdAway" app from F-Droid
https://f-droid.org/repository/browse/?fdid=org.adaway
Control
- Download "SELinux Mode Changer" from F-Droid
https://f-droid.org/repository/browse/?fdfilter=selinuxmodechanger&fdid=com.mrbimc.selinux
Enhanced LG Touch Assistant
http://forum.xda-developers.com/lg-g3/themes-apps/app-touch-assisstant-themed-t3199658
(kudos to @no14me)
1. Download “Root Explorer” app
2. Go to root/system/priv-app/LGSettingsAccessibility
3. Mount R/W
4. Change “LGSettingsAccessibility.apk” to “LGSettingsAccessibility.old”
5. Copy your accessibility of choice and rename to “LGSettingsAccessibility.apk”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. DONE!
Task Management
- Download "Greenify" or "Servicely"
http://www.apkmirror.com/apk/oasis-feng/greenify/
http://www.apkmirror.com/apk/francisco-franco/servicely/
Honestly, I don't encourage battery managers such as "Battery Doctor" or "Clean Master (Speed Booster)" as realistically, it takes up more battery or RAM in trying to keep the app open to "properly manage the battery". Yes there are benefits such a having a zippier G3, but there are better methods out there.
Click to expand...
Click to collapse
---------------------------------------------------------
CHAPTER 4: FONTS
- Font
- Emoji
Changing ROM Font
http://forum.xda-developers.com/android/themes/fonts-flashable-zips-t2964304
(kudos to @gianton)
Simply flash the zip in recovery and done!
Changing Emoji
New iOS 8.3 Diverse Jaundice Emoji:
http://forum.xda-developers.com/android/software-hacking/mod-apple-8-3-diverse-color-emoji-t3136169
(kudos to @caiosilva96)
1. Download “Root Explorer” app
2. Go to root/system/fonts
3. Mount R/W
4. Change “NotoColorEmoji.ttf” to “NotoColorEmoji.old”
5. Copy your emoji of choice and rename to “NotoColorEmoji.ttf”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. Now, on your phone (with new emojis installed), go to http://emojipedia.org/skin-tone-modifiers/
10. Copy the "(skin colour)" that comes before "Emoji Modifier Fitzpatrick Type-1-2"
11. Go to your settings app, then keyboard settings, then personal dictionary
12. Create a new word "(skin colour)", shortcut of "skin2"
13. Repeat for skins 3-6
14. Reboot if you want to
15. DONE!
- To change the skin colour, type the emoji, followed by the shortcut word (e.g. "skin2")
OR:
Traditional iOS Emoji:
http://forum.xda-developers.com/lg-g3/themes-apps/howto-change-lg-smiley-to-google-smiley-t2809012
(kudos to @Soulfly999)
1. Download “Root Explorer” app
2. Go to root/system/fonts
3. Mount R/W
4. Change “NotoColorEmoji.ttf” to “NotoColorEmoji.old”
5. Copy your emoji of choice and rename to “NotoColorEmoji.ttf”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. DONE!
---------------------------------------------------------
CHAPTER 5: BATTERY
- The cliche...
- Extreme
- Resolution changing
the cliche stuff...
Turn on power saving, turn off bluetooth, Wi-Fi, data, NFC etc., turn off automatic brightness and blah blah blah...
The Extreme Battery Life
http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
(kudos to @vaisakh7)
Change resolution down to 1080p
- Download "NOMone Resolution Changer" from the Play Store:
https://play.google.com/store/apps/details?id=com.nomone.resolution_changer&hl=en
(more coming soon)
---------------------------------------------------------
CHAPTER 6: GOODBYE
GO BACK TO STOCK + UNROOT + LOCK BOOTLOADER:
1. Backup your data!
2. Download “LG Flash Tool 2014”
3. Download your stock KDZ file of choice and of device model
4. Run “LGFlashTool2014”
5. Enter Download Mode:
a. Turn off the phone
b. Press and hold the ‘Volume Up’ key and connect your USB cable to the computer at the same time once the phone is fully turned off6. Set PhoneMode to “DIAG”
7. Select your downloaded KDZ file
8. Click “CSE Flash”
9. Click “Start” (DO NOT CLICK ANYTHING ELSE)
10. Click “OK” (DO NOT CLICK ANYTHING ELSE)
11. DONE!
(doesn't work any more )
---------------------------------------------------------
CHAPTER 7: MISCELLANEOUS
- Developer Settings
- Nova Launcher Secret Labs
- Free Google Drive
- Official wallpapers
ENABLING DEVELOPER SETTINGS:
1. Settings app
2. About phone
3. Software info
4. Tap build number repeatedly until it prompts you
**secret** ENABLING NOVA LAUNCHER LABS SETTINGS:
1. Nova Settings
2. Hold down ‘volume down’ key until it prompts you
FREE 100GB GOOGLE DRIVE STORAGE!!!
1. Open Drive Settings
2. Finish the Product Tour to redeem!
OFFICIAL G4 WALLPAPERS:
http://www.phonearena.com/news/Download-the-official-LG-G4-wallpapers-here-leather-background-included_id69079
(kudos to PhoneArena)
---------------------------------------------------------------------------------------------------------------------------------
Thanks for reading. If this helped, do give me a thumbs up.
Frankly, I do not want any donations.
"Let's get this pinned on the General Thread shall we? Pretty please with cherry on top..." :victory:
“Hi, I am Lousyguyy, a guy lousy enough to do this.”
ROM Index:
NOTE: I'll try my best to update this thread every weekend. Please PM or leave a comment below if I happened to miss out your ROM. Thanks guys!
---------------------------------------------------------------------------------------------------------------------------------
STOCK-based ROMs:
1. H815 v10C
http://forum.xda-developers.com/g4/development/stock-h815-10c-stock-rom-kdz-t3141866
by @autoprime
2. H815 v10A
http://forum.xda-developers.com/g4/development/rom-h815-10a-stock-rooted-rom-t3129036
by @autoprime
3. H811 (T-Mo) v10H
http://forum.xda-developers.com/g4/development/rom-lg-g4-h811-10h-t-mobile-usa-stock-t3142779
by @MicroMod777
4. All
http://forum.xda-developers.com/g4/development/h815-eu-l-p-t-sea-twn-t3176195
by @Marcosuper7
5. All v10G Genisys
http://forum.xda-developers.com/g4/development/h815-genisys-rom-1-0-classic-v10g-t3192649
by @BySezerSimsek
---------------------------------------------------------
AOSP ROMs:
1. H811/H815 5.1.1 BlissPop and Cyanogenmod 12.1 ROM
http://forum.xda-developers.com/g4/development/h811-h815-blisspop-cyanogenmod-12-1-t3185593
by @genesixxbf3
---------------------------------------------------------------------------------------------------------------------------------
Changelog
20th Sep:
- Complete thread overhaul
- Integrated ROM Index thread into this mega thread
OLDER:
14th Sep:
- Finally had time to credit all the great devs!!
- Marshmallow Boot Animation (flashable)
- Added LG Accessibility Themes
9th August: (yay for SG50!) :good:
- Temporary fix for "Stagefright" exploit
5th July:
- New iOS 8.3 diverse jaundice emojis!
15th June:
- Housekeeping!!
- G4 Weather Widget with Smart Notice
- Blueprint Wallpapers thread
7th June:
- My New ROM Index thread!!!: http://forum.xda-developers.com/g4/general/index-complete-g4-rom-index-t3129338/post61210790#post61210790
- Dirty & clean flashing
- Extreme battery life
- Terminology
- Tidbit
- New lock screen wallpaper
3rd June:
- Added Official LG Unlock
- Added TWRP
- Added Secret Nova Launcher Lab Settings
- Added LG Wallpapers
- Added Free Drive Storage Redemption (may not work for some)
- added more stuff I forgot.
- Removed Relocking
5th May:
THIS THREAD WAS BORN!!!
My Comment
Coming soon.
Several of the steps you list in here require root.
Many of the steps you list in message #1 require root priviledges:
Titanium Backup, any process using Root Explorer, Xposed, Greenify, AdAway all require root access. Maybe that requirement should be mentioned in each chapter.
eagerly waiting for any possible root methods.
i haven't got my hands on my G4, but it would be good to know that when my phone arrived i can root the hell out of it
i get my G4 v23-24, hopefully there is a root already then!!
*root is essential.
I would like to add a request for "enable wifi hotspot" to be added to the first post, when possible.
This is my first LG phone and I hope I can get the wifi hotspot working on Sprint once I get the G4 rooted.
Thanks a lot.
ahoythere said:
I would like to add a request for "enable wifi hotspot" to be added to the first post, when possible.
This is my first LG phone and I hope I can get the wifi hotspot working on Sprint once I get the G4 rooted.
Thanks a lot.
Click to expand...
Click to collapse
This gets added to almost any ROM anyways, so you should be fine.
Has anyone found a reliable place to get the LG G4 USB drivers? I've connected my G4 to the Mac, installed the drivers through the popup that appears, and doesn't work. The Mac can't detect the G4, and neither can adb.
EDIT: Never mind. Using LG PC suite seems to work. Adb connected.
Dennisg34 said:
This gets added to almost any ROM anyways, so you should be fine.
Click to expand...
Click to collapse
Not everyone wants to install a full ROM for select functions however.
Lock-N-Load said:
Not everyone wants to install a full ROM for select functions however.
Click to expand...
Click to collapse
True. Most of us just want root then we can use xposed to get the rest of the function we want.
frigidazzi said:
True. Most of us just want root then we can use xposed to get the rest of the function we want.
Click to expand...
Click to collapse
Xposed going to require custom recovery also
Can we helps devs to get more info for root? I have the G4 currently
I'm an LG newbie. It would be nice if you could link drivers and flashing software in your post.
I've owned just about every Motorola, some HTCs and Samsung phones and rooted and rom'd for years. This will be my first LG. Motorola has just become too much a pain in this area though rumor is the BL is locked on the LG too. Even root and xposed would be enough to protect my privacy.
ordered mine today
now we wait for root
Hi guys
Got my G4 earlier today. Just love it! One problem, my music on sd card doas not show up in the music app. And also when using MX player videos on sd card do not show up.
Sent from my LG-H815 using XDA Free mobile app
Thanks a lot.
tichyb said:
Hi guys
Got my G4 earlier today. Just love it! One problem, my music on sd card doas not show up in the music app. And also when using MX player videos on sd card do not show up.
Sent from my LG-H815 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried PowerAmp or other non-stock music player? This would kill the deal for me. I suspect there are options and would love to know PowerAmp, in particular, works with the external card. I have way too much music I need to have with me which is why I require sdcard support.
AliceBToklas said:
Have you tried PowerAmp or other non-stock music player? This would kill the deal for me. I suspect there are options and would love to know PowerAmp, in particular, works with the external card. I have way too much music I need to have with me which is why I require sdcard support.
Click to expand...
Click to collapse
I did not try the stock, because I have the full version of poweramp and it is working very well. My music is on the exsternal sd card
I am making this tutorial as I have had multiple versions of the LG LTE Leon and have used many firmware versions. I have created a stable method that has the least issues as I have had trouble with the latest firmware (MS34510f) disabling my root privileges. I have created a MEGA account specifically for all of the files necessary to complete this operation and have your device run smoothly. So, please follow my instructions exactly as stated and you should not have any issues. THIS PROCESS WILL REMOVE ALL DATA NOT SYNCED, DO READ BELOW NOTES IT IS VERY BENEFICIAL
Important Notes:
+This process will wipe all data that is not synced, it is important to ensure that no newer LG process are still on the device. Some might argue to leave data, to that I say good luck keeping your root and tethering without the device becoming suspiciously unstable.
+ I am not GUARANTEEING this will work on every model, but I have had an extremely high success rate with all Leon versions.
+ In this tutorial the process in which I remove Kingroot and replace it with SuperSu is for system stability. I find that most root functions I use seem to not work properly. (Wifi Tether Router and many others). So, I do recommend doing so.
+After the new OS is installed a MetroPCS splash screen will appear even if you do have T-Mobile. DO NOT BE ALARMED this firmware will not limit any functionality you had before, it will even help with tethering functionality.
Tutorial:
Let's Begin.
1. Download the link posted to obtain required files for this tutorial
Link: https://mega.nz/#F!PM4CQRqb!92kgIOnD0ZBY-8HVbtTwGQ
2. Open up LGFlashTool2014.exe
Begin by copying settings posted below, then click "normal flash"
3. Next click the "START" button
4. At this time, I recommend you verify all sync settings are to your liking and that all personal info needed is backed up
a. You have the option to throw all of your personal documents/pictures onto your SD card and removing it appropriately
(Go to: Settings - Storage - [scroll down to] Unmount SD card)
b. Next, navigate to Settings -Backup & reset [leave options default; both checked off] - Factory data reset - reset phone
c. Once reset it will most likely reboot, wipe, and then back to a OS. Now, you will Power Off entirely (make sure it is not plugged in so it will not go to charging mode)
d. Here is where we will hold down the Volume Up button with the phone unplugged from your PC. Then you must plug the USB into your phone.
e. A black screen with white text should post onto your screen, here we will continue to step 6
note: If this screen does not appear please power off and retry step d.
6. Next, follow the posted settings. Make sure to click the "Clear phone Software update Registry" button Then click "OK"
7. A new screen will arrive, and should begin the firmware download process. At this time it will take a few minute to load and should reboot to a fresh OS.
8. With the new OS in place, you can either follow the setup tutorial now or skip through for a later setup.
note: you can now insert your SD card
9. In the tools folder of the folder you downloaded copy the "mrw" folder to the Main Storage folder of your phone
10. Now copy the Kingroot apk to your downloads folder located on the main storage.
11. Go to Settings - About Phone - Software Info
At this time click the build number box a few times until it says you are a developer
12. Hit back until you are at the Setting menu, click on Developer options and check off "Stay Awake" and "Enable OEM Unlock" as well as "USB Debugging"
13. You may now run Kingroot, if it does not install root the first time it should flawlessly install the next.
14. After root is obtained, please go to your home screen and click the "Google Search" widget. Press Update Google Services and let it run. After that has been updated search for terminal emulator and install.
note: If the Play Store is acting fishy and force closing while typing in the search bar do not fret it will be fixed after reboot in further instruction
as an allternative use the jackpal.androidterm-1.0.70-71-minAPI4.apk provided in the "tools" folder
15. Open terminal and in a new window type: Su
16. Allow root usage and at this time type: sh /storage/emulated/0/mrw/root.sh
17. It will run with a few failed messages do not worry it should open SuperSu momentarily
18. Once SuperSu opens up allow it to update binaries using the "NORMAL" option but DO NOT REBOOT YET
19. At this time either download TWRP Manager from the play store or alternatively use the com.jmz.soft.twrpmanager-7.5.1.3-82-minAPI11.apk provided in the tools folder
20. Install and open TWRP Manager. Once opened click on device name and scroll until you see "LG Leon LTE (c50)"
a. Click on Recovery Version to Install and select "twrp-2.8.7.0-c50.img"
b. next click "Install Recovery" and if prompted for verification of install path and for install version select "YES" & "NORMAL"
21. After the TWRP setup is complete it may prompt you to reboot, if not click the arrow in the top left of the TWRP Manager screen and scroll down to "Reboot" and select "Reboot device"
22. After Reboot click TWRP Manager and verify a SuperSu prompt comes up if it hasn't already before the boot
At this point the device should be running smoothly. From here I prefer to do the following steps.
My Personal Setup after new install:
+Personally I like to install use a Root Uninstaller (I use 3C Toolbox Pro) and Uninstall and Backup all MetroPCS BloatWare including the Metro Browser.
+I also access the Hidden Menu by using the Dialer and Dial "2776348*#*"
- I scroll down to ApnUnlock and click to "Unlock APN"
- Then I navigate to Settings -Tethering & networks - Mobile Networks (I check off roaming data) - Access point names
--I then select the top APN and edit APN Type to: default,supl,mms,dun
---I click save from the top right selection, then turn on and off airplane mode
+If you are and Xposed user download "xposed-v79-sdk22-arm.zip","xposed-uninstaller-20150831-arm.zip", and "XposedInstaller_3.0_alpha4.apk" from: http://forum.xda-developers.com/showthread.php?t=3034811
-install the Xposed Installer, then Go to TWRP Manager, use reboot to recovery and from there click install and navigate to the "xposed-v79-sdk22-arm.zip" and install and reboot, it will reboot with a installing screen before your home screen, takes 5 minutes.
+I also use this AMAZING app "Wifi Tether Router", it is the only tethering app I use that works consistently (if you have an unlimited data plan). I get 30mbps up and down, playing many multiplayer games off my PC and PS4 averaging ping as low as 30 ! Setting I use for our device are in a post I created here: http://forum.xda-developers.com/leon/help/unlimited-metropcs-t-mobile-tether-t3290180
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Special Thanks to:
MrW0lf from www.W0lfdroid.com for the Kingroot to SuperSU scrip
Numerous users on the XDA forums I pieced all of this information with
Fabio Grasso for making the amazing Wifi Tether Router
Team Win for being creating an awesome utility that has saved me from numerous bricks creating a stable method
Xposed and the creators of awesome additions such as Lolistat, Lucky Patcher, Max Lock, and SNAPPREFS
Any feedback? Did I do Okay? Questions? Let me know!
Mega link down
The mega link isn't working. Please fix it.
Hi there,
I had kinda trouble today skipping the "Verify your account" after a recovery Factory Reset.
Long story short, a collegue's daughter locked her phone, and he had to perform a factory reset from recovery.
Since she changed her phone number and lost her password, no google's account recovery were possible.
After a week of trial and error, he decided to let me take an eye.
As you know :
- If you perform a factory reset with recovery, a google's anti-theft feature, called Factory Reset Protection, occurs and force you to login once with a google account that was previously set on this phone.
- If you perfrom a factory reset with android built-in (Settings -> Backup and restore -> Factory reset), you won't encounter this issue.
- If for a reason or an other, you don't know the required credentials, don't have unlocked your bootloader and never checked "Allow oem unlock", you're kinda screwed.
Here is how I figured a way to bypass this feature (BTW, I won't post any link this I didn't wrote any of theses tools. I juste figured a way to use them) :
Disclaimer :
I have not made any of the tools or adb command.
I can't be held responsible for any damage done to your phone.
Don't use any of theses instructions if you don't know the consequences.
Use theses instructions/tools at your own risk.
I achieved this bypass by search and trial.
English is not my native language. Name has been translated and may not be accurate. However, I'm sure you'll find what I meant.
1) Install minimal ADB and fastboot (Google that)
2) Install Motorola's USB drivers (Motorola's website)
3) Power on your phone, set-up a wifi connection.
4) Return to the Wifi wizard, choose a connection you do not want to connect to. Check 'Show password" and enter a random password.
5) Double press the text, choose "Share".
6) Long press "Gmail", you'll be redirected to Gmail's settings.
7) Press "Notification" then "Application settings"
8) Press Option (3 dot menu) then "Manage account"
9) From there, you'll sucessfully enter phone settings. Unlocking the "Developper option" won't work anyway.
10) Press "Users" and create a new one. Don't set it up ; instead, log in the newly created user.
From there, it was Trial and Error and I, somehow, managed to allow Developper option.
11) Try various things such as : Enabling developper option from new user ; Switch to owner and try again ; Open an app and return to settings with the little square (suspended app) with owner and new user.
Search anywhere, be patient, try various things, it'll work somehow ...
From a certain point, you'll be able to unlock the Developper option.
12) In Developper Option, check "Enable USB debugging"
13) Open a cmd in Windows, navigate to the adb folder. Type in the following command :
Code:
adb devices
You should be able to see the phone. If not, ensure you have the correct drivers (From device manager).
If your phone is detected, type in the following command :
Code:
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
Thanks to : Matthew Read (android stackexchange)
14) Perform a factory reset from settings.
15) Optionnal : After phone reboot, enable Developper Option, check "Allow OEM unlock" to allow future bootloader unlock and flashing.
That should do it.
Step 11 is very vague but I spent few hours unlocking this phone and I did LOT of things. I spent 1 hour or so on this step and forgot what I precisely did to unlock this option.
If you manage to succeed, please post your instructions.
I WON'T relock the phone in order to discover exactly what worked.
This won't work for long, since this is a security fault and will be patched (as every previous bypass) sooner or later.
Be patient and be curious ! Have fun
Don't waste time here.....
Already Video available on YouTube...
Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate
I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.
You, mister, are my savior! Thank you very much.
Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:
Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it
Hello XDA community,
Im a noobie when it comes to rooting, thats why i need help...
I deleted some files that i want to recover on my Samsung S7 Edge 2-3 years ago, this device has Android 7.0. (Never updated)
There is a lot of apps such as Disk Digger that offer you to recover every single file but the device must be rooted to access 100% on the internal memory.
Right now my Samsung S7 Edge is not rooted but i need to root to recover this files, so my question is, there is anyway of rooting without factory reset, or there is anyway of doing a fully backup of the internal memory of my device without touching the partitions so then i can try recovering my files later with this apps?
I hope someone can help me...
Regards
It's pretty disappointing that nobody ever responded to this considering how big is a community it is and how popular the S7 Edge was. I know this is pretty old and hopefully you were able to resolve this before this message but I'm going to respond to this just so you don't feel like your question wasn't acknowledged at all. I have an S7 Edge through Verizon which uses the Snapdragon processor. And I will find a link to post for you that although the method says it's discontinued I rooted my phone through this method and it works fine. The only reason that you would have to wipe your phone is if you're changing firmware as far as I know. I've rooted my phones and did not have to wipe them. I kept all the data and everything.
Before I lift this you are also asking about an application that you could use to back up your phone and that would be Samsung smart switch. It has a companion app for the desktop and it sinks to the phone and it'll make a backup of your data.
Now on to the root method all props and praise goes to the people that worked to give this to the people I'm not good at doing all this **** and I'm not meaning to step on any toes I'm just trying to help you since nobody did for two ****ing years.
To root
1. Download PrinceComsys Odin
Odin.Prince.Comsy.zip
drive.google.com
2. Download the engboot.
Engboot Download
Nougat_S7_Edge_EngBoot.tar.md5
drive.google.com
3 make sure you have adb and fastboot installed on your computer (goggle them)
4. Root file
Download the file below.
Nougat_S7_Root_2_82_All_Carriers_V2.zip | by jrkruse for Galaxy S7 Edge
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
BELOW IS THE ROOT AND MOD FOR THE PHONE!!!!!
Follow this method to root:
1. Shut off the phone and boot into download mode (volume down, home, and power). Use Odin And Flash Nougat_S7_Edge_EngBoot.tar.md5 In AP Slot
2. When the phone reboots, unlock developer options by going into the phone settings scroll down to 'about phone' find the build number and tap on it repeatedly after several times it will unlock Developer Options then back out once and in your settings you should have a new option on the very bottom called developer options go into that and enable USB debugging and Disable Verify Apps Over USB.
Plug the phone into the computer and make sure you have adb and fastboot installed to this location
C:\Users\YOUR PROFILE\AppData\Local\Android\Sdk\platform-tools
go to that folder and inside it hold shift and right click then click on 'open command window here'
then in command prompt type
adb devices
then hit enter.
The computer should automaticly detect and run adb
3. Unzip the Nougat_S7_Root_2_82_All_Carriers_V2.zip and hold shift and right click then click on 'open command window here'
In the command window type root.bat then press enter from your PC.
4. This will install root when done phone will reboot
5. The process wipes dalvik cache so it will take a few minutes to reboot
6. If having problems getting Grant SuperSU dialog to come up you can delete the SuperSU app and root will be granted instantly to all root request
Give phone a few min to settle open developer options set animation scales .05 and others to .05
Give phone a few min to settle open developer options set animation scales .05 and others to .05
ODIN FAILED TO WRITE ERROR
Did you get this Failed To Write Message in Odin?
----------------------------
Odin Error Message:
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
SOLUTIONS
Did you:
? Open Odin as Administrator?
? Try the Prince Comsy version?
? Enable Developer Settings?
-Open Settings > About Phone > Tap Build Number 7 Times
? Enable OEM Unlock?
-Go Back to Settings > Tap Developer Options > Tap OEM Unlock
? Enable USB Debugging?
-Tap Developer Options > Tap USB Debugging
NOTHING WORKS
Did you try every single thing but nothing works?
Well, did you right click "Odin" each time you go to open it and then click "open as administrator"?
Sometimes you have to try several different versions of Odin.
But I have found that Odin3 v3.12.7 was the one that would work when the others had not.
I always would forget to also open Odin as Administrator.
It's a pain in the neck to have to remember to open as admin every time.
But you usually have to do it.
Did you check that ADB had started? Maybe that might be the reason it won't work?
But I doubt it! But you just never know and I am just trying to help you get it flashed.
It's a very quick flash and you can see that the PDA load was very quick as well.
But as far as the errors, you just have to keep trying...
Which I mean, you sometimes have to open, close, reopen Odin when it doesn't work.
Sometimes that helps, sometimes it doesn't.
It's all about the right Odin version at the time
making sure the cord is good
Opening Odin as Admin
And keep trying again after restarting your phone by holding the download mode button sequence again.
============
Congratulations! You are ROOTED but you're not done
Follow these instructions next
On your phone, open the SuperSU app (installed during the root process) and tap on Settings. Half-way down under Security, tap on "Enable su during boot".
This option will ensure that startup scripts that are installed during this process get to do their job correctly.
Download the fix or fix+debloat script flashable ZIP package appropriate for your model of phone and copy this file to your device:
S7_VOLTE_ICON_FIX_ALL_VARIANTS or S7_or_S7Edge_Fixes_V15.zip (MD5 hash F15CD9BDC35382A8F48FFBEDBB1BCDF0) (any Samsung Galaxy S7 or S7 Edge)
turn off auto update of time and date in your phone settings, then set your year to 2013,
Launch FlashFire app on the phone and click the (+) button in the lower right to add a step. Select a 'Flash ZIP or OTA' flash step.
Locate the flashable ZIP package and select it. For options, check on 'Mount /system read/write' and leave the rest of the options unchecked.
Tweaks to Root
Debloat and fix several issues with the phone (CPU lag issues, poor battery performance, phone becoming too hot, Wi-Fi not saving passwords, hotspot/tethering not working,
VoLTE icon appearing, searching for service issues, MMS not working, unauthorized security nag notification, etc.):
Full notes on what this flashable update does:
Adds a rotate button to the native gallery app
.
Adds a shortcut call button in the call log next to each logged call.
Adjusts several CPU tunables, which fixes phone lag and battery life issues.
Disables "No SIM" popup when no SIM card is present.
Disables roaming data by default.
Disables secure storage support, which fixes Wi-Fi passwords not saving issue.
Disables Verizon provisioning for Wi-Fi tethering/hotspot (will still use your data plan, of course).
Enables ADB to run as root by default.
Enables CPU idling/sleeping, which fixes phone heat issues.
Enables mock GPS locations.
Enables native call recording feature in the dialer.
Enables native Wi-Fi calling feature in the dialer.
Enables RIL power saving features.
Enables scheduled messages in the native messaging app.
Enables the camera during calls.
Enables unlimited contact merging.
Enables using the new 3GPP2 Profile ID (Verizon exclusive).
Fixes various 'searching for service' and other cellular network connectivity issues (SMS/MMS not working, calls not working, etc.)
Knox apps, drivers, and data are removed (fix+debloat version).
Prefers LTE network.
Raises the contact name length limit to 1,280 characters.
Raises the maximum SMS recipient limit from 10 to 90.
Remove nagging 'unauthorized actions' security notification (fix+debloat version).
Removes VoLTE icon.
after you flash your stuff change the date back. and you're good.
I know this all seems like a lot and it seems very confusing but it's pretty easy if you just follow the directions this will not wipe your data. Please do research, read through the forms and just tried to get as much knowledge as you can before you go about doing this it's an easy process but it's better to go in with more knowledge, I hope this helps. If you have to reinstall the firmware make sure that you install CSC home so you don't lose your data