HI,
Before the update, i used to get 31000+ Antutu scores.
After the update, the scores do not even reach 27000.
Has any one noticed , or is it only me?
If this is correct, what has gone wrong?
I hope it is not like the REDMI 1S, where the update just reduced the CPU speeds to overcome the overheating issue.
schubeir
schubeir said:
HI,
Before the update, i used to get 31000+ Antutu scores.
After the update, the scores do not even reach 27000.
Has any one noticed , or is it only me?
If this is correct, what has gone wrong?
I hope it is not like the REDMI 1S, where the update just reduced the CPU speeds to overcome the overheating issue.
schubeir
Click to expand...
Click to collapse
mine actually increased :laugh: before update it was around 31100, after update i got 32207 :beer:
first time i got a low score around 27000, when you do benchmark test make sure your device is not charging.
regards,
aashking
aashking said:
mine actually increased :laugh: before update it was around 31100, after update i got 32207 :beer:
first time i got a low score around 27000, when you do benchmark test make sure your device is not charging.
regards,
aashking
Click to expand...
Click to collapse
Hey aashking, I have a request for you. Can u put the screenshot of antutu benchmark running in its initial phase and simultaneously checking tha core clocks on trickster mod or cpuz. I actually want to know what is the max clock speed our 615 hits when it stressed(running antutu). And what scheduler and governor u are using. Can u do it n post the screens here? It's a humble request sir, thankyou.
sauravdante said:
Hey aashking, I have a request for you. Can u put the screenshot of antutu benchmark running in its initial phase and simultaneously checking tha core clocks on trickster mod or cpuz. I actually want to know what is the max clock speed our 615 hits when it stressed(running antutu). And what scheduler and governor u are using. Can u do it n post the screens here? It's a humble request sir, thankyou.
Click to expand...
Click to collapse
@sauravdante i did that test and got these results
CPU 0 to 3 cores reaches the max of 1497 MHz
CPU 4 to 8 cores reaches the max of 998 MHz
Thanks,
aashking
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I was selected to test out an Alpha version of ANTUTU 5, here are my impressions so far. It is markedly longer than previously. There are new CPU tests, including Single Thread Integer, Single Thread Floating Point, refined 2D tests, which are now performed in landscape, and an all new 3D test Project Anarchy, which is a Forrest Scene. Pretty Cool. Cant wait for the final project.
stevessvt said:
I was selected to test out an Alpha version of ANTUTU 5, here are my impressions so far. It is markedly longer than previously. There are new CPU tests, including Single Thread Integer, Single Thread Floating Point, refined 2D tests, which are now performed in landscape, and an all new 3D test Project Anarchy, which is a Forrest Scene. Pretty Cool. Cant wait for the final project.
Click to expand...
Click to collapse
I am testing it too and I've noticed something but I am not sure if it's related to Antutu. When it goes to CPU Interger Test or Float point test, all cores go to 100% usage except for CORE1. For some reason, it stays at 1-10%. Maybe it's the kernel. I am using ElementalX
andreasyeah said:
I am testing it too and I've noticed something but I am not sure if it's related to Antutu. When it goes to CPU Interger Test or Float point test, all cores go to 100% usage except for CORE1. For some reason, it stays at 1-10%. Maybe it's the kernel. I am using ElementalX
Click to expand...
Click to collapse
I will check it out if I can, I am stock unrooted. How can I check for you?
stevessvt said:
I will check it out if I can, I am stock unrooted. How can I check for you?
Click to expand...
Click to collapse
I think you can't. I am using InsertCoin Rom to check CPU Usage. Thanks anyway!
http://forum.xda-developers.com/showthread.php?t=2809307
Sent from my Nexus 5 using Tapatalk
i just downloaded and gave a shot but it is restarted my device around 34%
M8 viperone 1.8.0 @ 2.5ghz via elementalx 0.19
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SD redbull v2
Nice,...stock? My best so far was 43341, stock unrooted. My first run resulted in a F/C, but everything since has been good.
stevessvt said:
Nice,...stock? My best so far was 43341, stock unrooted. My first run resulted in a F/C, but everything since has been good.
Click to expand...
Click to collapse
I have no idea how you guys are getting a such a high score, im stock rooted but only can get around 41500 and that's only after updated the gpu drivers
I make some research, try many things in this days to make device faster. I was try everything. Change minfree values and other kernel values.
And I got idea. On kernel for L7(i don't know about L5) default freq for GPU is set to 380mhz (stock value is 245)
I have question for developers @ALEX.IMER @skyinfo @-CALIBAN666- @Plamb1r @Asce1062 and others, I cant remember all right now. As CPU,GPU is a processor too. When we set it to maximum freq battery drains faster, and device have lags on heavy operations. The latest avaible freq is not good. Same as on CPU. Because Comes fatigue processor and then runs slower. True??
I edit egl.cfg and enable full GPU rendering (i have thread in general section) and downclock it to 245 and there is good results
Before this on 30 min of heavy usage device spend ~11-13% of battery
Now I have only ~7% of battery drain.
All of this what I said is different from user to user I only ask.
Tried your eglpatch but I got status 0 when flashing.
vaikz said:
Tried your eglpatch but I got status 0 when flashing.
Click to expand...
Click to collapse
Hmm, try to put manualy, permission ia 0644 r-w-r-r
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After underclocking GPU see difference. I use my phone like before, and there is much more battery.
L5 GPU has only 1 frequency : 133MHz... Wonder how Imer OC it...
skyinfo said:
L5 GPU has only 1 frequency : 133MHz... Wonder how Imer OC it...
Click to expand...
Click to collapse
Idk, but difference between L5 and L7 GPU is that L5 have Adreno 200 (AMD Z430) on 133Mhz and L7 have Adreno 200 'enhanced' which work from 200 to 245MHz.
You know about kernels, use both, extract it and see difference.
Last night I was just messing around and looking at some things trying to figure out the issues with choppy scrolling on our phones since the update and was checking out CPU usage and noticed something interesting...
I saw that two of the CPU cores were being reported as "sleeping" with no activity registered on them...even after running a benchmark there was no activity shown...
A reboot "fixed" the issue and all 4 cores were reporting activity...but then after going to bed, and waking up this morning it is back to the same...I attached a couple of screenshots to show what I'm seeing. You can see in the second picture the "history" clearly shows where the two cores went to sleep...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my XT1650 using Tapatalk
Isn't the 820 a big/little quad core? You'll only have 2 active at one time.
fr4nk1yn said:
Isn't the 820 a big/little quad core? You'll only have 2 active at one time.
Click to expand...
Click to collapse
You can clearly see here...that after rebooting the phone...all 4 cores will register as active for a time...
Or here
Sent from my XT1650 using Tapatalk
I was wrong. The SD820 is not big/little it's asymmetrical.
With that said I'm running Geekbench in splitscreen and the highspeed cores are not showing as active.
Going to reboot and try again. If the score is significantly higher.
fr4nk1yn said:
I was wrong. The SD820 is not big/little it's asymmetrical.
With that said I'm running Geekbench in splitscreen and the highspeed cores are not showing as active.
Going to reboot and try again. If the score is significantly higher.
Click to expand...
Click to collapse
My AnTuTu scores don't seem to be significantly lower when the cores are "sleeping" maybe 1000 points give or take (on total scores of 150,000+ so not significant) but it's still odd for all of these apps to be having such a hard time accurately reporting the activity on such a popular chipset ya know?
Sent from my XT1650 using Tapatalk
I have noticed the same phenomenon on Xperia XZ (Snapdragon 820 also) after Nougat update. Have not done any benchmarking though.
Whats the path to get to the screenshots you posted???? Or is it an app????
You can also see the utilization is much less. Maybe it's automatic that they wake or sleep based on demand?
I've noticed this too. Have opened up games and many other apps but cant seem to get those 2 cores "awake".
Here's an interesting app I stumbled across: https://play.google.com/store/apps/details?id=com.mediatek.multicoreobserver
With the last update its definitely not turning off any cores. All 4 are staying active and scaling at all times.
I want to preface this with the fact that I have run several roms over the course of my time spent in rooting and flashing. Out of all of the roms, CM12.1 is the most stable and currently runs the fastest. I'm wondering if the Note 7 or S7/S7E ports will be able to handle overclocking because every time I have tried, the device will reboot. If I can't get these types of roms to be stable and fast, I won't be able to test them with Antutu benchmark. That said, I'm wondering if there is anyone who has a higher score than this. If so, what rom did you use and how stable is it?
I should note that I am currently using these specs:
-ROM: CM12.1
-Kernel: IdleKernel
-Screen Size: 2560 X 1440 (My phone seems to handle this incredibly well, though I can't quite get it up to 4K without having problems.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Killing Joke said:
If I can't get these types of roms to be stable and fast, I won't be able to test them with Antutu benchmark.
Click to expand...
Click to collapse
Yeah, this joke is really killing me...
Dejan Sathanas said:
Yeah, this joke is really killing me...
Click to expand...
Click to collapse
The questions were posed because I want to know if anyone has had better luck than I did. I'm merely curious as to what the limits are of this type of phone.
The Killing Joke said:
The questions were posed because I want to know if anyone has had better luck than I did. I'm merely curious as to what the limits are of this type of phone.
Click to expand...
Click to collapse
This score means nothing if you do not specify used cpu governor, hotplug driver, i/o scheduler and o.c value.
With an S7E port (default settings, no optimizations and no OC), i can get +62K and a 3D score higher than yours.
zlazaar said:
This score means nothing if you do not specify used cpu governor, hotplug driver, i/o scheduler and o.c value.
With an S7E port (default settings, no optimizations and no OC), i can get +62K and a 3D score higher than yours.
Click to expand...
Click to collapse
As expected, most N7/S7E ports will have a higher 3D value than CM. The govenor I used was interactive. Overclocked to 2.76 ghz, gpu was also overclocked to 450 mhz. I chose not to mess with the i/o scheduler. Hotplugging was turned off.
The Killing Joke said:
As expected, most N7/S7E ports will have a higher 3D value than CM. The govenor I used was interactive. Overclocked to 2.76 ghz, gpu was also overclocked to 450 mhz. I chose not to mess with the i/o scheduler. Hotplugging was turned off.
Click to expand...
Click to collapse
Well, if you are satisfied with your rom so keep it.
Anyway, in raw speed Touchwiz can't compete with CM/AOSP.
A little tip for higher score : use Fiops schedular with read ahead buffer = 256kb
hey i have galaxy s7 edge exynos and in in antutu benchmark i've got only 110k
when its supposed to be 130k in exynos
3d benchmark - 47k
cpu - 26k
ux - 27k
ram - 6k
why is that and i should be worry about this?
sorry for bad english(thx for helpers)
Its not a big deal, specially if you have been using the s7edge for a while, or if u bought a second-hand one, then Its normal to get a lower results.
Sent from my Samsung Galaxy S7 Edge using XDA Labs
I have had mine for almost 12 months and get a score of 139035
colint3 said:
I have had mine for almost 12 months and get a score of 139035
Click to expand...
Click to collapse
Are you using custum rom?
no i am not rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Im using hydra rom 1.4.5
dolev11 said:
hey i have galaxy s7 edge exynos and in in antutu benchmark i've got only 110k
when its supposed to be 130k in exynos
3d benchmark - 47k
cpu - 26k
ux - 27k
ram - 6k
why is that and i should be worry about this?
sorry for bad english(thx for helpers)
Click to expand...
Click to collapse
140k on khongloi s8 port rom
146k with ambasadii rom
Mine is ridiculous
k****ij84 said:
Mine is ridiculous
Click to expand...
Click to collapse
i solved my low score by making few steps:
i reinstall stock rom nougat 7.0(if you dont have a custom rom just make a format data).
then i made factory reset.
after install the stock i made reboot several times(3-4 times).
then i disabled every app that i am not using for example: onedrive, samsung app like gearvr and much more.
then i rest my phone and didnt touch him for 10 min to cool
after all this steps i made clean ram in the settings before i run the antutu
and finally i run the antutu and got 131k
sorry for my bad english hope you find my solution helpful...
Hi I got 13k+ just ran device manager cleaned ram and greenify