Build warning - radio update - YU Yureka Q&A, Help & Troubleshooting

I am building CM-11.0 for my YU Yureka device. Everything passed & I got cm-11-20150204-UNOFFICIAL-tomato.zip
But with following waring
Code:
warning radio-update: no radio image in input target_files; not flashing radio
Also size of zip is only 238.2 MB, whereas stock rom size is 488.8 MB
I think gapps is not included in build zip file.

dumtara said:
I am building CM-11.0 for my YU Yureka device. Everything passed & I got cm-11-20150204-UNOFFICIAL-tomato.zip
But with following waring
Code:
warning radio-update: no radio image in input target_files; not flashing radio
Also size of zip is only 238.2 MB, whereas stock rom size is 488.8 MB
I think gapps is not included in build zip file.
Click to expand...
Click to collapse
Errors in the radio image will make your build incapable of using any radio frequencies. That is no calls , messages ,
bluetooth , wifi and everything else that uses your radio antenna. Everything else should work if the bugs are solved.
And for the size thing. ,the addational size is of the radio drivers , the gapps and bloatware

PCIHD said:
Errors in the radio image will make your build incapable of using any radio frequencies. That is no calls , messages ,
bluetooth , wifi and everything else that uses your radio antenna. Everything else should work if the bugs are solved.
And for the size thing. ,the addational size is of the radio drivers , the gapps and bloatware
Click to expand...
Click to collapse
Yeah... iknow radio (phone calls, wifi etc.) will not work. But how to resolve it.

Wow..... to my surprise everything working fine. Wifi, calling, 3G are woring fine.
I am finally able to build Cyanogenmod 11 (CM-11.0) for my yureka.
I flashed this ROM to my yureka & everything working.
Now i am going to install gapps.
EDIT: installed PICO verison of gapps & its working fine.
Here is my CM-11 ROM thread http://forum.xda-developers.com/yureka/development/cm-11-0-cyanogenmod-rom-t3021713

dumtara said:
Wow..... to my surprise everything working fine. Wifi, calling, 3G are woring fine.
I am finally able to build Cyanogenmod 11 (CM-11.0) for my yureka.
I flashed this ROM to my yureka & everything working.
Now i am going to install gapps.
EDIT: installed PICO verison of gapps & its working fine.
Here is my CM-11 ROM thread http://forum.xda-developers.com/yureka/development/cm-11-0-cyanogenmod-rom-t3021713
Click to expand...
Click to collapse
I don't know about my yureka. But for my s3 radio drivers were used from previous rom. Cm never replaced the radio files.
So no surprise here.
And gapps are not included in cm.or any custom aosp based ROMs.

Kapiljhajhria said:
I don't know about my yureka. But for my s3 radio drivers were used from previous rom. Cm never replaced the radio files.
So no surprise here.
And gapps are not included in cm.or any custom aosp based ROMs.
Click to expand...
Click to collapse
Thanks for replying. :good:
This is my first build & everything works fine. Thats a surprise to me. :laugh:
Yes I know gapps not included in CM as I have installed CM Rom on my Galaxy-y many times.

Related

[Q] [L5] WiFi not working after installing PURE AOSP 4.4.2

Yeah, the wifi isn't working and I already tried the fix. Anybody else got any better solutions?
soMVD said:
Yeah, the wifi isn't working and I already tried the fix. Anybody else got any better solutions?
Click to expand...
Click to collapse
Same problem here man, I've installed CM 11 Beta 3 + an OC Kernel and now it just won't find my network, it just keeps searching and searching and finds nothing, I've also tried writing it manually but it says "Out of range", it is needless to say that before installing the kernel the wi-fi worked pretty well, it's not a ROM trouble but a kernel one I guess. I've also tried other kernels and it keeps failing, also tried different ROMs such as Pure AOSP 4.4.2, CodefireXperiment and it doesn't work either, any idea? anybody?
The wifi kernel fix isn't working either.
my wifi can't even be turned on... strange
soMVD said:
my wifi can't even be turned on... strange
Click to expand...
Click to collapse
Well if I were you , I would install 20D + root + cwm , then Flash the rom with correct instructions. If you already did that, try to flash v20 baseband.
I have done that, but to no success. The screen turns white if I flash the v20 baseband.
[L5][E610/E612/E617][ROM][KOT49H][4.4.2][BETA 2] Pure AOSP KITKAT 4.4.2
Instal this room everything work great,except free wifi.Wifi with wpa wpa2 work great any solution..Like this rooom.Thanks to pecanCM wwho created this room.Kernel flashhed in CM..11(kernel version-340-cm [email protected]#8 eng.ron 21.12.2013 ttest-keys please help.
Room
Code:
http://forum.xda-developers.com/showthread.php?t=2564610
problem solved instal new firmware.
firmware-
Code:
https://disk.yandex.com/public/?hash=iQ8DYdXhXfNsa4ietWGzIMG5sGeIQHk2qeFz1TbvUpc%3D&locale=en
after fhis format everything except exstd,go to recovery instal room and rebooot.Install gapps packaage.
Gapps-
Code:
http://goo.im/devs/paranoidandroid/roms/gapps-full/pa_gapps-modular-full-4.4.2-20131230-signed.zip
kernell-
Code:
http://forum.xda-developers.com/showpost.php?p=48595803&postcount=828
Flash supersu and root fixer.
supersu-
Code:
http://forum.xda-developers.com/showthread.php?t=1538053
root fixer-
Code:
http://www.mediafire.com/download/5uz6q35ou0do2p7/rootfixer.zip
Install 3package for optimized Dalvik & Bionic.
optimized Dalvik & Bionic post-
Code:
http://forum.xda-developers.com/showthread.php?t=2546120
Room link-
Code:
http://www.mediafire.com/download/0iqw969s5ahjc9c/aosp_e610-ota.ron-beta2.zip
Now everything work fine.Thanks PecanCM for room.:good:
Guys, which ROM for L5 has fewer bugs, CM11 4.2.2 or AOSP 4.2.2?
Thanks

Unofficial OmniROM by struq & Kayant 02/02/2014

Hello struq and Kayant,
congratulations on this excellent ROM.
For me it is after many attempts with CM11 a surprise how stable and fast our Defy + can run under KitKat, even though both ROMs run on the same kernel.
Now a few more translations into German and the ROM would be perfect.
Please continue developing this ROM.
regards
Defy_Duke
Great OmniRom
It is definitely a great KitKat rom: fast and stable :good:
Thank you!
Thank you for new relase of the OmniROM.
I have only two problems:
1. No TWRP Recovery boot function (i have fix it with your ramdisk-recovery file )
2. OmniSwitch not working
the rest works fine, stable and fast.
greets
About the Question
I also noticed no deep sleep with wifi connected, do you have this too?
Click to expand...
Click to collapse
in this Thread http://forum.xda-developers.com/showthread.php?t=2614453&page=14
For me the deep sleep works fine.
Very fluid
Well this is one of the ROMs I kept longer since was so fluid but I don't know why is not updated?
Anyway super rom.
Yes, OmniROM is a super ROM for the Defy. :laugh:
There is a newer Version out (20140228), but this has an big bug in TWRP recovery boot, so is better not install this version.
I think struq is work on next version of OmniROM. :good:
well is it better than quarx ?
It has the same Kernel from Quarx and Blechdose, but struq has only stable versions of the kernelcode in his Rom.
For me is the Omnirom much more smoother and stable as CM11.
Omni for Defy March 8th version / Google Play problem
I've installed the new Omni version this morning and it is very nice! Performance of my Defy is acceptable.
I had one problem since I had a working internet connection but couldn't access Google Play. After installing 2-27_GApps_Minimal_4.4.2_signed.zip the problem was solved.
Many thanks for this ROM! Now I can use the same environment on my Nexus 7, I9305 and my old Defy.
Klaus
Thank you struq for the new version.
TWRP works fine now, no bootloops and start in TWRP works.
Works perfect for me.
Wow, i have never threy a better ROM on my Defy+.
I hope that i now have 10 post and can answer in dev. threat.
Thank you all for your awesome work.
I installed omni-4.4.2-20140308-mb526-TEST.zip and had some issues at first:
-after a dirty flash over the version 20140202, supersu (flashed via twrp) was not working
-clean flash: same error as Post #159 in original thread:
status bar, lock screen, etc doesn't appear ie system ui doesn't start
Click to expand...
Click to collapse
-another clean flash worked fine but no usb mass storage, only mtp/ptp (I am almost certain that I had us mass storage on 20140202)
did not yet try to enable it via terminal emulator
(since I am a forum newbie, I can't post in the dev-threat)
I think me have since KitKat only MTP/PTP
Fine that the new OmniROM now works on your phone. :laugh:
Yeah youre right. Went back to build 20140202 since I had some charging issues and there is only MTP/PTP too.
Maybe it was just a dream
But will stay on this one for now, feels more stable...
Omni for Defy March 11th version / Google Play problem gone
mklmkl said:
I've installed the new Omni version this morning and it is very nice! Performance of my Defy is acceptable.
I had one problem since I had a working internet connection but couldn't access Google Play. After installing 2-27_GApps_Minimal_4.4.2_signed.zip the problem was solved.
Many thanks for this ROM! Now I can use the same environment on my Nexus 7, I9305 and my old Defy.
Klaus
Click to expand...
Click to collapse
Just installed the March 11th version. Google Play now works out-of-the-box.
Nice ROM, thank you!
Klaus
What are the main differences between Quarx's CM11 and OmniRom? (...an SlimKat??) :silly:.
newer version possible
Is there maybe a chance for a new version which incorporates latest Quarx's & Omni changes?
Would be great!

dual sim bug and bluetooth

Hello,
I have a couple of problems with my Samsung Galaxy S III Duos (I9300). CM 12, CM 12.1.
1. I cannot switch to use Internet from another sim card. It always uses just one of them. I tried swapping cards, It just chooses one of them, not always sim in slot 1.
2. Problem with Bluetooth in car (BMW, CCC). When I call (incoming/outgoing call) from one sim card everything is fine. When I call from another sim, car answers the phone and shows duration of a call, but no sound.
U are using latest build?
ziad311 said:
U are using latest build?
Click to expand...
Click to collapse
I noticed these bugs when I was on CM12 or CM11 (not sure which one, November 2015 release, Android 5.0.1 if I'm not mistaken), flashed back to stock 4.4.4, both bugs disappeared, so I guess it was not a hardware problem. Then I tried CM 12.1 20151225 release, both bugs were still in the ROM, so I flashed 4.4.4 again.
Can anyone confirm if they have the same bugs or if they are known at all.
Thanks.
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
ziad311 said:
Flash latest cm12.1 not cm12
Android 5.1.1 not 5.0.2
Click to expand...
Click to collapse
As I already wrote I did flash CM12.1 dated 25.12.2015 from here
http://forum.xda-developers.com/galaxy-s3-neo/orig-development/rom-cyanogenmod-12-1-s3-neo-t3099384
It didn't work either. Is it possible that I chose the wrong GApps and this was the reason?
I think I used open gapps stock version, but not sure, don't have that SD card and can't check now.
i have used CM12 and 12.1 rox and RR and i don't recall these two problems that you have mentioned specially the internet problem to me it was perfect but with a little reboot here and there so soory i couldn't help.
P.S :soory for my bad english

CM13 - WiFi's stuck on 'Searching for Networks' dialogue

Hey guys, I've been using CM13 builds on my Nexus 6p for last few months. Generally, i flash new builds after 3/4 days from the last one. Everything's works fine, no big issues; but recently from last months build which ever update i flash on the device, the WiFi seems not working. It shows, it's on - Searching for Networks; but not able to connect or even find any network at all. And i tried to flash back to the older builds of CM13, the WiFi works fine on those builds quite fine. Beside this, I've tried Paranoid Android ROM on this device, WiFi works fine on that rom. So, have any of you faced such problem on CM13? And, please can anyone help me out on this matter?... Thanks in advance...
rudra_666 said:
Hey guys, I've been using CM13 builds on my Nexus 6p for last few months. Generally, i flash new builds after 3/4 days from the last one. Everything's works fine, no big issues; but recently from last months build which ever update i flash on the device, the WiFi seems not working. It shows, it's on - Searching for Networks; but not able to connect or even find any network at all. And i tried to flash back to the older builds of CM13, the WiFi works fine on those builds quite fine. Beside this, I've tried Paranoid Android ROM on this device, WiFi works fine on that rom. So, have any of you faced such problem on CM13? And, please can anyone help me out on this matter?... Thanks in advance...
Click to expand...
Click to collapse
I've been successively flashing the nightlies from 07/24 until today and have had no issues with Wi-Fi. Sounds like yoh crossed over drom June to July build. Flash the July vendor image then re-flash latest cm and you should be good to go. If you use a custom kernel also make sure you are using the latest version made for this month.
blitzkriegger said:
I've been successively flashing the nightlies from 07/24 until today and have had no issues with Wi-Fi. Sounds like yoh crossed over drom June to July build. Flash the July vendor image then re-flash latest cm and you should be good to go. If you use a custom kernel also make sure you are using the latest version made for this month.
Click to expand...
Click to collapse
Thanks a lot, brother. I've just flashed the latest vendor image, and it's working smoothly...

KTLEDUOS SM-G900FD Lineageos 14.1 Builds 080217 - 080917

Hi there,
just to give a feedback. DUALSIM is not working on both builds. LTE function fails. Made complete new flash, nothing helps...
Same applies to crDroid - build 20170802 - 7.1.2
I would kindly ask for help around here
Thanks,
Light of Magic
after one day....
Hi,
I don´t know why dualsim function stopped working... I tried 2 builds each - Lineageos, Ressurection OS, crDroid ... going back to stock ROM, everthing works fine. I even searched through the net to get a suitable pit file.
Only thing - I wanted to update like https://forum.xda-developers.com/galaxy-s5/development/rom-lineage-os-samsung-galaxy-s5-lte-t3534283
And I could not find TWRP 3.0.0 as recommended, so I use 3.1.0 - I could not install SkiesROM, since it was maybe to large....
For any help I would be greatful,
Light of Magic
LightofMagic said:
Hi,
I don´t know why dualsim function stopped working... I tried 2 builds each - Lineageos, Ressurection OS, crDroid ... going back to stock ROM, everthing works fine. I even searched through the net to get a suitable pit file.
Only thing - I wanted to update like https://forum.xda-developers.com/galaxy-s5/development/rom-lineage-os-samsung-galaxy-s5-lte-t3534283
And I could not find TWRP 3.0.0 as recommended, so I use 3.1.0 - I could not install SkiesROM, since it was maybe to large....
For any help I would be greatful,
Light of Magic
Click to expand...
Click to collapse
Here u get TWRP 3.0.0.0 for klte as recommended. Extract the zip before use. Use the .tar for Odin flash or the .img for flash through recovery. Tip: download twrp-app from Playstore. You'll find all downloadable content there.
I've read that going back from LOS / AOSP to SkiesROM is not possible without flashing a Stock Rom first. Make sure u have flashed the fitting bootloaders via Odin before u flash the Stock ROM. Suitable are the ROMS from ALEXNDR. They're prerooted and a good base to go further.
Good luck
still
I wounder, does anyone have the same issue? Using the builds in May I did not have this issue.
Thanks to ottili81 for TWRP 3.0.0.0 !!!
Greetings,
Light of Magic

Categories

Resources