Related
Hello Everyone
I understand that many of the users have tough time rooting their device and thus I have decided to look into Rooting using Exploit method over USB commands rather than flashing ROM. I would just look into what could be done as there are few differences between Z3 Compact device series but all use the same Snapdragon 801. This guide is intended for UNLOCKED & LOCKED BOOTLOADER. Make sure you check each method if it supports locked/unlocked bootloader or not. In case it is not mentioned, it is to be understood that it supports locked bootloader as well. However, if the method fails, please provide feedback and also update SuperSU in the script files.
All Credits to the developers for their tools!
HTML:
I take no responsibility for world wars, broken phones, flying machines,
UFO invasions, bricked phones, dead sd card . If you agree to go ahead with this,
it is your choice and no blame should come to any developer/contributor whatsoever
PREREQUISITE
-USB DEBUGGING
For this guide to work, make sure usb debugging is enabled.
Go to Settings> About>Build Number> tap it 7 times and "Developer Options" should appear in settings.
In Developer Options> Enable USB Debugging.
-USB DRIVERS
For these I suggest use Flashtool. However if you still have problem. I would update a guide for that as well
http://www.flashtool.net/index.php
METHOD 1 (Kitkat/Lollipop. Unlocked/Locked Bootloaders)
1.Download latest SuperSU from HERE
2.Place supersu in your sd card
3.Install recovery from the link HERE and use the method as stated in the thread.
4.Once booted into recovery, flash supersu.zip. Make sure it is 2.37 or above for LP.
5.Done
Check FAQ 1
How to make a TA backup.
1. Download the latest version of Backup TA from here DOWNLOAD HERE
2. Extract the ZIP file to a folder location of your choosing.
3. Navigate to the folder location of Backup TA.
4. Make sure no other script or application which is using ADB is running.
5. Make sure the device is booted in normal mode (the way you normally use it).
6. Run Backup-TA.bat
7. Read the last paragraph of the license before continuing.
8. Read the information and follow the instructions given by the tool.
Someone pointed out that the script needs root to work.
UNLOCK bootloader from Official Website
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
Please note! It will only be possible to unlock the boot loader for certain releases of this model. You can check if it is possible to unlock the boot loader of your device by checking the service menu.
Open the Contacts app.
Click the menu button in the top right.
Click Settings.
Long press (for about 5 seconds) somewhere in the empty space just above soft key bar, and then release your finger. A button named Enter service code will then appear in the same area (this may take a few tries).
Click Enter service code. A dialler will appear.
Enter *#*#7378423#*#* in the dialler.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked(bootloader).
If your bootloader can be unlocked, proceed to the above website and follow the on screen instructions. You do not need to download full adb , just download the platform tools attached with this guide.
Once you have working drivers, unlock bootloader, made backups and have usb enabled, you can proceed to the actual rooting process.
Backs are highly recommended but not a must .
There are a few methods due to differences in devices and one might work on all, one or none. The methods are arranged in preferred order but not necessarily to work in the same order.
METHOD 2: Kitkat Unlocked Bootloader
Download boot.img from attachment
unlock bootloader via Sony
Flash boot.img via flashtool or fastboot commands
METHOD#3
Use Kingo Root app
Enable USB debugging and run the application.
Download from here
http://www.kingoapp.com/
You can use apk file as well but PC method is more effective.
METHOD 4
CHINESE METHOD
http://www.mgyun.com/en/GetVRoot
KingUser be installed.
Install SuperSU from market and replace Kinguser with SuperSU in SuperSU options
METHOD 5
Run kingo and Vroot at the same time using a PC!
At times this works with few devices
ROOT CHECKER BASIC FROM PLAYSTORE to check if you have root.
Credits
zxz0O0 for rootkit
If you think I have missed your name and you deserve to be in the list, please do not hesitate to inbox and I would gladly update it.
Reserved FAQ
FAQ 1
If you do not wish to flash recovery and only want to gain root. Use boot command instead of flash. Or delete files as stated in the recovery guide
I have an error/question!
stuck at cleaning up
Close the tool and run again.
.
error: more than one device or emulator
Check if you have installed any windows android emulater like bluestacks etc
.
stuck at Waiting for device
Make sure device is connected
Make sure USB-debugging is enabled
Make sure no Sony PC Companion or other Sony software is running
Make sure you have adb drivers installed
Make sure the computer is permanently authorized for connection on the phone (you get a dialog the first time you connect)
.[*]How to unroot?
Flash factory firmware in flashtool. Exclude everything except system. No need to wipe anything.
.
[*]Will I keep root after factory reset?
Yes
"PREREQUISITE : USB DEBUGGING + USB DRIVERS"
"Firstly I suggest you make a full backup of your applications/data especially TA backup."
As you make a backup of TA without root?
Backup TA -> http://forum.xda-developers.com/showthread.php?t=2292598
Q: Do I need root for this?
A: Yes, you do need root for both backup and restore to work. I would advice to use @DooMLoRD's excellent Easy Rooting Toolkit for this, when not already rooted.
kvi said:
"PREREQUISITE : USB DEBUGGING + USB DRIVERS"
"Firstly I suggest you make a full backup of your applications/data especially TA backup."
As you make a backup of TA without root?
Backup TA -> http://forum.xda-developers.com/showthread.php?t=2292598
Q: Do I need root for this?
A: Yes, you do need root for both backup and restore to work. I would advice to use @DooMLoRD's excellent Easy Rooting Toolkit for this, when not already rooted.
Click to expand...
Click to collapse
Thank you so much for your feedback. The guide is still in process and I would make necessary changes as well once it is completed.
Making TA is a suggestion and NOT by any means a step to the process. I am going to work a bit as it needs editing at places
UPDATE :
Guide updated
waichai said:
Hi Hnk1,
Sorry bothering you.
I have read so many threads on xda, and they all have too many steps and risk. I found your thread is simple and easiest to follow.
I have read your thread from http://forum.xda-developers.com/z3-tablet-compact/general/root-flashing-construction-t3091763
My device: SGP621 (LTE version) Build number 23.1.A.0.167 Kitkat 4.4.4. Bootloader is Locked.
I would like to root and TA backup. Can I just follow these step from your tutorial below? Thanks.
PREREQUISITE..............................................
Click to expand...
Click to collapse
Firstly always quote me in the right forum and NEVER ASK me questions in PM. If you next time do it, I will simply ignore.
Well, The recovery clearly states it works for your device so go ahead and flash it.
Hnk1 said:
Firstly always quote me in the right forum and NEVER ASK me questions in PM. If you next time do it, I will simply ignore.
Well, The recovery clearly states it works for your device so go ahead and flash it.
Click to expand...
Click to collapse
I apologize for the PM. I should have read your signature. Thank you for your reply.
I am on 4.4.4 and 23.0.1.A.0.167. I tried method 1,3,5 and none of them works, i thinks it's because of the 23.0.1.A.0.167 is not rootable using the exploit method ?
-Zeta- said:
I am on 4.4.4 and 23.0.1.A.0.167. I tried method 1,3,5 and none of them works, i thinks it's because of the 23.0.1.A.0.167 is not rootable using the exploit method ?
Click to expand...
Click to collapse
I suggest you try the Chinese method. I rooted with that but download the Chinese version because it's 1.83 while English version stands at 1.78
Noob question... unlocking bootloader will make me lose DRM right?
Lrclaros said:
Noob question... unlocking bootloader will make me lose DRM right?
Click to expand...
Click to collapse
It is wise to make @ backup. However, I have always unlocked my boot loader via official Sony website and never had any problems even without a TA backup.
Good luck
Guide updated and changes made!
I have unlocked bootloader, by oficiall way (Sony site). Phone is full reseted now. Can I back all data, whole system? I've made backup of all on the internal mem with TRWP. Will everything works normaly after that?
So if I access the service menu in the root section it says I cannot unlock the bootloader.
Is there a way to do so through unofficial means?
I did backup my TA so I just need to be able to do that :/
So far I'm unable to unlock the bootloader and never upload a custom recovery.
My model is D6603 with version 6.x of Android OS.
Is the capacity to to unlock the Bootloader bound to the android version?
I heard that I could root the phone if I downgrade to an older OS version and then do it... anybody can confirm?
For those with any trouble and that can't flash twrp, a full procedure for injecting TWRP into the kernel is here:
https://forum.xda-developers.com/showpost.php?p=74528751&postcount=22
But... why?
Well, many people like and buy the Xperia line of devices currently on the market who previously owned a Samsung, LG or HTC. There are many differences in hardware, but most certainly in how Sony perceives the Android ecosystem and how it differs from the other major brands. This (noob) guide is meant to help people on the path to the Sony side I'm sure it contains lots of info which is even useful for the old timers
Things which differ a LOT from the other brands:
First and foremost: no recovery partition;
Second but not least: no download mode.
Sony has replaced the Android recovery partition with the FOTA kernel, which is meant to aid the device in rolling out OTA updates, which allow kernel updates without the risk of bricking the device. I hear you scream: "But wait, what about the recovery partition announcement by Sony themselves!?", well the answer is simple: that is meant for unlocked bootloader devices ONLY, as a part of their "Open Devices" program.
What is Flashmode, Flashtool and what are these FTF and SIN files I am reading about?
I'm going to quote @Androxyde here (it's a straight copy of his index page), as he is the maintainer of the tool:
Flashtool is a S1 flashing software that works for all Sony phones from X10 to Xperia Z Ultra. They all use the S1 protocol for flashing firmwares.
This program was originally made to flash sin files downloaded by SEUS/SUS or PC Companion.
Based on a command line tool written by @Bin4ry (Andreas Makris), I brought a user interface to sin files flashing.
We worked together to add more features to the tool such as rooting methods implementation or TA backup / restore.
Then I took the lead and got some advice and help from him occasionally on some features like rom cleaner or bootloader unlocking.
From time to time, sin files have been bundled into what is now well known FTF (Flash Tool Firmwares) and more features have been implemented.
But flashing firmwares is still the core of Flashtool (that is updated at least to follow Sony improvements around sin files) and the reason of its name.
Flashtool can also easily unlock the bootloader of the phone using the BLU icon as far as the bootloader of your phone is unlockable
The flashing feature as well as bootloader unlock feature are available whatever the phone is recognized or not by the application. What is only mandatory for flashing is to own the FTF file according to the device you want to flash it on.
Why should I use Flashtool?
Once bootloader unlocked, official sony tools do not work anymore.
Using official sony tools, you can only upgrade. No downgrade possible.
Using flashtool, you can choose what to flash and what not to flash. This said, many rooting scenarios are available implying kernel only downgrade to retrieve a patched rooting exploit and then flash back the right kernel.
You said unlocking bootloader?
This process gives you the opportunity to flash custom roms such as CyanogenMod ROMs.
I invite you to visit the FXP Project that brings CM and AOSP to xperia devices.
Click to expand...
Click to collapse
To complete this explanation, Sony devices know 2 bootloader based flash modes:
Flashmode (This is the S1 flash protocol @Androxyde wrote about)
Fastboot (This is the original, unmodified fastboot mode from Google)
In the past there was the Sony-Ericsson Update Software/Service (SEUS, later named SUS because Ericsson got removed from the name) which could update your device to the latest software or recover it from an inoperable state. PC Companion was less of a tool for updating and more of making backups, installing applications and managing the device storage. Sometime the past 3-4 years Sony merged the 2 programs, so if people on XDA or anywhere on the web talk about using PC Companion to restore their device, they are not wrong, they are simply using the latest version
Sony recently released their own package called 'flash tool' (to add to the confusion of noobs in the community), which deep down is a little easier to use and stripped down version of EMMA, which is a tool we mere mortals will probably never use as EMMA is the flash tool for Sony's repair shops and tech support. It's primary function is to allow owners of an unlocked bootloader device (or, 'open device' as Sony named it) to still use Sony firmwares and update their device, because as soon as you unlock the bootloader, the OTA updates will stop.
Things to remember on the files used by these tools:
An FTF file is basically not more then a ZIP archive containing multiple SIN files, you can open the FTF using 7z/WinZip/WinRar and look inside it.
A SIN file is a disk/partition image, which is encrypted by Sony. S1 (the bootloader) will check this encryption to make sure the image was not tampered with before it accepts it for flashing.
Fastboot flashing will always fail when the device is still in a locked bootloader state. For some models it is even disabled entirely or non-functional until you unlock the bootloader.
I am reading about the TA, what is it, why should I make a backup?
The TA partition (Trim Area) is a signed partition which holds various things which are unique to your device, like the device's IMEI, DRM keys and bootloader settings and configuration options. This partition can not be exchanged between devices, because it really is unique. If you would flash the TA backup from someone else it will cause a hard-brick rendering your device only useful as a paperweight...
When you unlock your bootloader you will lose all the DRM features on your device, this makes it valuable to have a backup of the unmodified version stowed away somewhere safe. You will need root level access to create that backup before unlocking. There is a tool called Backup TA which is widely used to create and restore backups of the TA partition. TWRP in XZDualRecovery can do the same.
When you restore the backup TA partition you made before unlocking the bootloader you will essentially re-lock the bootloader and restores the DRM keys. This process is (as far as we know up to now) undetectable by Sony's support staff, which makes it easy to restore the phone to stock for warranty driven support issues as unlocking your bootloader will void your warranty on the device (it is subject to local law though). That is why, for a lot of owners of a Sony device at least, it is considered to be the "Holy Grail" and is usually the reason for a lot of users to wait for a root exploit to be found before unlocking their bootloader.
Okay, I get it now. I would like to unlock my bootloader, how to proceed?
I'm not here to rewrite everything other people or Sony themselves can write just as well or even better, so I have a link for you:
http://developer.sonymobile.com/unlockbootloader/
Read it, it will teach you just about everything you need to know.
Once your bootloader is unlocked, your device will be much like a Nexus device when it comes to rooting, excluding the recovery partition, so that's why we flash or hotboot a custom kernel with a recovery, by using fastboot. If you are afraid of a terminal and typing commands, you can use a tool like QuickIMG or Flashtool to make your life easier.
Right, now I want root!
Well, if you have an 'open device', this is a lot easier then you think. Just remember that using root exploit kits is unnecessary and in some cases even risky as some packages do funky things or jeopardize your privacy.
Try to find a 'stock based' custom kernel. These are custom kernels built by the community to add features to the kernel but are meant to work with Sony's stock firmwares. I'm the maintainer of XZDualRecovery myself and created the Kernel Builder for the supported devices.
These custom kernels will NOT root your device (unless otherwise stated by the creator), but introduce a recovery to the boot process and with that you will be able to flash SuperSU to root your ROM.
But you just said Sony devices don't have a recovery partition, please... UN-confuse me!!
Yes, I did, and I'm right: there have been bright minds in the community who included a recovery in the boot image (the kernel partition) in the past and that way included a recovery on our Sony devices.
With the current 'open devices' policy from Sony, we now have:
Recovery stored inside the system partition, which is meant for locked bootloader devices (closed devices) because they can not run custom kernels;
Recovery stored in the boot image (for open devices);
Recovery stored on the FOTA partition, but with a trigger from the regular boot image at boot (also for open devices);
Recovery stored on the FOTA partition -renamed to recovery- together with an updated bootloader (for open devices, of course).
Hmm, okay... it's still confusing, but OK. My service menu says I'm rooted, but none of the root apps work properly, what gives?!
If you open the phone dialer app and on the keys see the letters below the digits, you can spell the word SERVICE. Type *#*#SERVICE#*#* and a service menu will pop up. Tap 'Service Info' and then 'Configuration'. Then you will see one of these lines there almost on the bottom of the list:
"Rooting status: unknown": it's probably unlocked, but it was unable to verify that;
"Rooting status: rooted": you have unlocked the bootloader;
"Unlock bootloader allowed: YES/NO": this tells you if the bootloader is (vendor-) locked or not, if it says NO, you're out of luck.
The rooting status there is not telling your system is rooted, it tells you your bootloader is and will allow custom rom/kernel flashing. Don't confuse these two.
I'm not allowed to unlock my bootloader But I still want root, can I?
In some cases you can. It depends on the bugs found in specific firmware versions which allow a root exploit to be developed.
From the 2015 range of Xperia devices Sony started using dm-verity, which causes a bootloop once the system partition is modified. This modification of the system partition will be required to include a SU binary in the system to obtain root, so until a dm-verity defeating option is found, locked bootloader root or recovery will not be possible.
For older models, check the device forums and the cross device development forums to check out the community rootkits available. Usually it will tell you what ROM version it is intended for. Be careful with rootkits/roottools though, some are also found to be introducing malware to your device or sending privacy sensitive data to the creators. Use common sense, if you have no valid use for the root user level, keep it off your phone. If you already have recovery, you can use that to modify or clean your device instead.
I have rooted my phone, but whenever I try to modify something on it it spontaneously reboots or I get a message 'Permission denied" when trying to remount the system partition R/W! Why is that?
Like all manufacturers, Sony tries to make it difficult (or downright impossible) to modify the Android base system they created. Because if you can, anyone or anything which obtains root access can. This is a serious security risk, because if it's malware which puts itself on the system partition and locks up your phone, the only way around this is to wipe your entire device and restore a stock ROM using PC Companion or Flashtool. Of course, they have their own proprietary software to protect as well, but security is the main objective here. The really sensitive bits are stored in the TA partition as I explained earlier.
Sony (-Ericsson) had a service called RIC, which in time moved partially in to a kernel feature. What it does is monitor if system is remounted writeable. This usually is a situation you want to avoid at all costs so RIC will deny you permission, cause a kernel panic OR simply reboots your device to get out of that state.
"Remount-Reboot fix", RICKiller, RICDefeat, and XZDualRecovery all (attempt to) disable this service or stop the kernel from acting on a remount of system.
Hard-bricks, Soft-bricks, bootloops??
They are simple to understand, really:
Hard-brick, TYPICALLY NOT RECOVERABLE: The bootloader stopped functioning, this can be caused by a bad flash/update or by restoring the wrong TA backup.
Soft-Brick, ALWAYS RECOVERABLE: the system partition is corrupted or just simply empty, this causes the device to stall at boot. A soft-brick can also make the screen remain off, because of a bad or missing kernel image.
Bootloops, ALWAYS RECOVERABLE: If the system gets powered up and then reboots during the start. This can be at the kernel splash screen or during the boot animation.
In case of a Soft-brick or Bootloop:
Use the installed recovery (if it still works), PC Companion, QuickIMG or Flashtool to restore your device to working order.
In case of a Hard-brick:
You can never recover from that state without physically opening your device and do some heavy duty engineering (JTagging) on it to flash back the correct bootloader/TA (read that link to see what it would take!). This is way too difficult for 98% of the community, which means that hard-bricking your device is typically the creation of a very expensive paper weight.
Please, be extremely careful when dealing with the TA partition.
*********************************************
I will be updating the above text for sure, if you feel anything is missing, please write a post in this thread with the text you wish to include. I want this to be a community driven guide and I know a lot, but I can't know everything
*********************************************
Extended the text some more to include ideas from:
@Klaos3000
@Yenkazu
Thanks for the suggestions/additions guys! :highfive:
As it concern the recovery, i think you can create a partition with EMMA.
Sent from Greece
kos25k said:
As it concern the recovery, i think you can create a partition with EMMA.
Sent from Greece
Click to expand...
Click to collapse
Please, re-read the first part...
Can I root my iPhone 6 with this guide?
That was a bad joke.
Very useful guide. We should probably educate people around here about what an unlocked bootloader actually means and what it let us do. I'm shocked by the number of people using Kingroot and other risky closed-sourced tools, especially the ones with an unlocked bootloader.
People of earth, if your bootloader is unlocked, it means that your device will be much like a Nexus device when it comes to rooting, sans the recovery partition, so that's why we flash or hotboot a custom kernel with a recovery, by using fastboot. If you're afraid of a terminal and commands, then you can use a tool like QuickIMG. After that, you simply flash SuperSU. That's it!
You can add something about TA Partition and RIC server. :3
Good thread btw
Yenkazu said:
You can add something about TA Partition and RIC server. :3
Good thread btw
Click to expand...
Click to collapse
I'd say, give me a piece of text on the subject for the OP and I'll include it :good:
[NUT] said:
I'd say, give me a piece of text on the subject for the OP and I'll include it :good:
Click to expand...
Click to collapse
RIC, from your thread :3
http://forum.xda-developers.com/xpe...b-definitive-root-remount-reboot-fix-t2317432
But, it's kinda useless if people already use your DualRec, since it's already integrated xD
But more info didn't hurt (?)
TA Partition
http://forum.xda-developers.com/xperia-z/help/ta-partition-t2451186
Not really details, but user should know the impact of unlocking bootloader
Updated the OP to include info on the TA partition and RIC protection. Also included a part of the post by @Klaos3000, because it contained some useful info
Thanks guys :highfive:
Very usefull! :good: But for me 2-3 Weeks to late. I'm still quite new on Z3C and I collect all those info the old style
Without this thread you would need days to catch all dependencies - With this you would need approx. 10 min!
Very helpfull and good to link new user to...
And yes - I came form the Sammy side (of the moon ) and was a bit shocked what sony did with "open source android".
Not because of SystemUI ( I love it...) but because of all this "anti modding" stuff they build in.
Sticky? Sure - must be!
Updated the OP to include info on Hard-bricks, Soft-bricks and bootloops.
Please people, if you have anything to add to the OP, let me know!
As I said, I know a lot, but I can't know everything there is to know about Sony devices...
Good work (...as usual from your side) :good:
Very useful tutorial.
No need to write long explanations to Sony beginners anymore - just add a link from here.
Really Helpful
Brilliant.....Really it deserves place at (Sticky Threads).I think if you add minimum One Custom Kernel(for stock firmware)
of every devices..That would b very helpful to recover from Soft bricks.Then this thread will be an "ALL IN 1" thread.Its my Opinion after all...Brilliant work.
Need a little advice.
Hi,
I have a ZL with Locked bootloader and your ZL-lockeddualrecovery2.8.22 installed
I am on stock 5.0.2 now Rooted thanks to your awesome recovery.
Question is now I have your dual recovery would I be able to simply flash crDroid CM zip Thread Here and others like it or would I still need to unlock the bootloader Edit OP of ROM says it is required
So if I flashed the above would it replace your recovery with the boot.img in the zip
Sorry for the noob questions but I am new to Sony devices and still taking baby steps with this phone
I can unlock the bootloader no problem but I am more concerned about your recovery been replaced.
Thanks in advance :good:
bigrammy said:
Hi,
I have a ZL with Locked bootloader and your ZL-lockeddualrecovery2.8.22 installed
I am on stock 5.0.2 now Rooted thanks to your awesome recovery.
Question is now I have your dual recovery would I be able to simply flash crDroid CM zip Thread Here and others like it or would I still need to unlock the bootloader Edit OP of ROM says it is required
So if I flashed the above would it replace your recovery with the boot.img in the zip
Sorry for the noob questions but I am new to Sony devices and still taking baby steps with this phone
I can unlock the bootloader no problem but I am more concerned about your recovery been replaced.
Thanks in advance :good:
Click to expand...
Click to collapse
As long as your phone is locked, you only can flash stockroms and stock-kernels.
You also have to use recovery for stockrom, because you kernel is "untouchable" and recovery have to put in /data and /system partition and can't be put in kernel.
All other roms/kernels will end in errors while flashing.
If you have unlocked your BL, you can flash any rom and kernel you want, as long as your phone is supporting it.
Yes, by flashing a zip, your kernel will be replaced and in most cases they have a recovery in it.
By flashing a rom from another version or changing from stock-based roms to i.e. CM-roms or Omni and vice versa, you have to unpack the kernel (boot.img) by hand and flash (fastboot) this first, before you flash (after a reboot in recovery) the whole zip.
Otherwise it could end in bootloop.
Because of (i most cases) wiping /system, /data while installation, your stock-recovery will deleted too. This depends of the work of the installer in the zip file.
Btw... before unlocking your phone, backup your TA ( with FlashTool). This TA is unique and you may use it to lock your phone again later.
And... if your phone is unlocked - no fear of losing recovery. You always can flash another one with fastboot again.
Someone correct me, if i was wrong or forgot something.
@bigrammi, you can always try yo repack the CM kernel using my kernel builder, that way you will still have XZDualRecovery but then included in the boot image, so no risk of losing it...
akkufix said:
As long as your phone is locked, you only can flash stockroms and stock-kernels.
You also have to use recovery for stockrom, because you kernel is "untouchable" and recovery have to put in /data and /system partition and can't be put in kernel.
All other roms/kernels will end in errors while flashing.
If you have unlocked your BL, you can flash any rom and kernel you want, as long as your phone is supporting it.
Yes, by flashing a zip, your kernel will be replaced and in most cases they have a recovery in it.
By flashing a rom from another version or changing from stock-based roms to i.e. CM-roms or Omni and vice versa, you have to unpack the kernel (boot.img) by hand and flash (fastboot) this first, before you flash (after a reboot in recovery) the whole zip.
Otherwise it could end in bootloop.
Because of (i most cases) wiping /system, /data while installation, your stock-recovery will deleted too. This depends of the work of the installer in the zip file.
Btw... before unlocking your phone, backup your TA ( with FlashTool). This TA is unique and you may use it to lock your phone again later.
And... if your phone is unlocked - no fear of losing recovery. You always can flash another one with fastboot again.
Someone correct me, if i was wrong or forgot something.
Click to expand...
Click to collapse
Thanks yet again bro :highfive:
Wow these Sony Xperia's take some figuring out :laugh:
I think I have just about got my head around it all now
I have managed to get the TA backed up with TWRP and Flashtool so I should be safe now
I will have to unlock the bootloader just to stop it nagging me to upgrade :laugh:
@Nut Thanks bro I will take a look at your suggestion it's a little more complicated than what I am used to or should I say different.
bigrammy said:
[...]
@Nut Thanks bro I will take a look at your suggestion it's a little more complicated than what I am used to or should I say different.
Click to expand...
Click to collapse
Well, i saw HTC M7 in your signature. If you were able to unlocked, s-off-ed, re-flashed firmware and rooted this beast - you don't need to have any fear about a Sony device.
[NUT] said:
@bigrammymi, you can always try yo repack the CM kernel using my kernel builder, that way you will still have XZDualRecovery but then included in the boot image, so no risk of losing it...
Click to expand...
Click to collapse
Hi @Nut,
I thought I would take your advice and expected to download a tool to unpack everything and pick through the files and start editing init.rc etc etc :silly:
I had no idea this was a fully automated Online tool
I still can't quite believe it you're a genius!! :angel:
A BIG THANKS to All the Xperia dev's helpful community members and especially the tool creators XZDualRecovery, Flashtool, XperiFirm and PRFCreator etc you're all Awesome :highfive:
I fear I will become lazy with such great dev's :laugh:
bigrammy said:
Hi @Nut,
I thought I would take your advice and expected to download a tool to unpack everything and pick through the files and start editing init.rc etc etc :silly:
I had no idea this was a fully automated Online tool
I still can't quite believe it you're a genius!! :angel:
A BIG THANKS to All the Xperia dev's helpful community members and especially the tool creators XZDualRecovery, Flashtool, XperiFirm and PRFCreator etc you're all Awesome :highfive:
I fear I will become lazy with such great dev's :laugh:
Click to expand...
Click to collapse
Thanks, glad to have been of help to you
Dear Experts,
as I have already complained in several topics, my N9005 didn't boot after encryption.
Now I'm on the way to try other ROMs. But now I'm starting to thing, how to even test it with other ROMs. I have a backup of the original ROM made with TWRP. BUT, if I encrypt the device and something goes wrong - then how will I restore ? Will TWRP be somehow able to read the encrypted device ? Please suggest on how to proceed ?
I'm afraid, that if I put a ROM and encrypt the phone with it, I'll be stuck with that ROM... Or if not - what to choose in TWRP in order to get rid of the encryption then ?
Many thanks in advance!
Did you use the phone with stock recovery to encrypt?
Duplicate.
Please follow your existing thread: http://forum.xda-developers.com/gal...encryption-t3478539/post69084515#post69084515
Closed
Just bought a new Xiaomi mi 6T device. My previous phone was a Sony Xperia m6. To unlock the bootloader and get root access was a bit of a pain on the latter. I remember having to backup a ta-partition to secure my DRM-keys.
Wanting to unlock the bootloader on this device I couldn't find any information about backing up and restoring a certain partition to secure the DRM-keys. What I did find was this post on the mi community forum about how unlocking the bootloader results in the widevine beïng downgraded from L1 to L3 (read the post for further details. The only way to reverse that process is to relock the bootloader again according to the the information I found.
So this is my question: Is there a way to keep the widevine L1 version, with better HDR performances, with an unlocked bootloader by backing up and restoring any data or partition on the phone that is responsible for widevine or other DRM content?
Medeon said:
Just bought a new Xiaomi mi 6T device. My previous phone was a Sony Xperia m6. To unlock the bootloader and get root access was a bit of a pain on the latter. I remember having to backup a ta-partition to secure my DRM-keys.
Wanting to unlock the bootloader on this device I couldn't find any information about backing up and restoring a certain partition to secure the DRM-keys. What I did find was this post on the mi community forum about how unlocking the bootloader results in the widevine beïng downgraded from L1 to L3 (read the post for further details. The only way to reverse that process is to relock the bootloader again according to the the information I found.
So this is my question: Is there a way to keep the widevine L1 version, with better HDR performances, with an unlocked bootloader by backing up and restoring any data or partition on the phone that is responsible for widevine or other DRM content?
Click to expand...
Click to collapse
No, you don't loose L1. You don't need to backup anything. You will allways have L1 with the official roms (global/eea) and L3 with all other at the moment including china official, xiaomi.eu and all forks.
e.g:
I have L1 with global rom, unlocked BL and magisk.
fabsen said:
No, you don't loose L1. You don't need to backup anything. You will allways have L1 with the official roms (global/eea) and L3 with all other at the moment including china official, xiaomi.eu and all forks.
e.g:
I have L1 with global rom, unlocked BL and magisk.
Click to expand...
Click to collapse
Thank you very much for confirming this, that's a huge relief! I also just found out about it reading this article.
Medeon said:
Thank you very much for confirming this, that's a huge relief! I also just found out about it reading this article.
Click to expand...
Click to collapse
I'm unlock and rooted, on L1, but u can't install Netflix from play store, so no full HD
I kinda anticipated that, since when you root your device with magisk, Android prevents you from installing Netflix. Which is no problem in my case, since I only watch Netflix on my television or Pc. You can watch Netflix though on an unlocked device if don't root your devices, isn't it?
I just installed magisk and remains L1. Just that the app doesn't appear on play store. Sideloeaded and got hdr working just fine.
i think only SONY has this problem with drm keys and widevine l1..if you unlock the bootloader of any SONY mobile said goodbye to this keys.And the hdr of the camera i think..
I only recommend that you back up the persist partition with TWRP if you are going to change the ROM on the Mi 9T. Some ROMs try to damage this partition and if it does you will Widevine L1 forever as I lost it
LeonardoBordin said:
I only recommend that you back up the persist partition with TWRP if you are going to change the ROM on the Mi 9T. Some ROMs try to damage this partition and if it does you will Widevine L1 forever as I lost it
Click to expand...
Click to collapse
Using OrangeFox and there is no checkmark to include Persist to Backup - screenshot attached.
I think it was the same with the official TWRP.
Which TWRP offers to backup Persist?
Btw, I was able to disk-dump Persist:
https://forum.xda-developers.com/mi-9t/how-to/to-extract-stock-boot-recovery-images-t4058447
But read somewhere (cannot find now and didn't try) that Persist.img cannot be flashed through Fastboot (?)
Medeon said:
Just bought a new Xiaomi mi 6T device. My previous phone was a Sony Xperia m6. To unlock the bootloader and get root access was a bit of a pain on the latter. I remember having to backup a ta-partition to secure my DRM-keys.
Wanting to unlock the bootloader on this device I couldn't find any information about backing up and restoring a certain partition to secure the DRM-keys. What I did find was this post on the mi community forum about how unlocking the bootloader results in the widevine beïng downgraded from L1 to L3 (read the post for further details. The only way to reverse that process is to relock the bootloader again according to the the information I found.
So this is my question: Is there a way to keep the widevine L1 version, with better HDR performances, with an unlocked bootloader by backing up and restoring any data or partition on the phone that is responsible for widevine or other DRM content?
Click to expand...
Click to collapse
No, but you will lose the safeties that could lead in to a persist partition corrupted.
Backup your persist partition and store this backup OUT of the phone, on a cloud or a PC.
Pupet_Master said:
No, but you will lose the safeties that could lead in to a persist partition corrupted.
Backup your persist partition and store this backup OUT of the phone, on a cloud or a PC.
Click to expand...
Click to collapse
The same question that was in the preceeding post:
Using OrangeFox and there is no checkmark to include Persist to Backup .
I think it was the same with the official TWRP
Which TWRP offers to backup Persist?
Btw, I was able to disk-dump Persist:
https://forum.xda-developers.com/mi-9t/how-to/to-extract-stock-boot-recovery-images-t4058447
But read somewhere (cannot find now and didn't try) that Persist.img cannot be flashed through Fastboot (?)
zgfg said:
The same question that was in the preceeding post:
Using OrangeFox and there is no checkmark to include Persist to Backup .
I think it was the same with the official TWRP
Which TWRP offers to backup Persist?
Btw, I was able to disk-dump Persist:
https://forum.xda-developers.com/mi-9t/how-to/to-extract-stock-boot-recovery-images-t4058447
But read somewhere (cannot find now and didn't try) that Persist.img cannot be flashed through Fastboot (?)
Click to expand...
Click to collapse
The chinese team TWRP
Pupet_Master said:
The chinese team TWRP
Click to expand...
Click to collapse
Pls link for that TWRP
Andd a question, official TWRP and OtangeFox properly support encryption - it is not needed to format Data, jus each time on booting to TWRPt to enter the current Android screen unlock pin/pass and they rrad/write to Internal storage
Is it also the case with the Chineer TWRP?
zgfg said:
Pls link for that TWRP
Andd a question, official TWRP and OtangeFox properly support encryption - it is not needed to format Data, jus each time on booting to TWRPt to enter the current Android screen unlock pin/pass and they rrad/write to Internal storage
Is it also the case with the Chineer TWRP?
Click to expand...
Click to collapse
If you will flash ANY different ROM, you NEED to format. since the ROM wont be able to access a encrypted data partition from another ROM/Encryption key.
Also, you can do a forum search for the chinese TWRP, i don't have the link
Good luck.
Pupet_Master said:
If you will flash ANY different ROM, you NEED to format. since the ROM wont be able to access a encrypted data partition from another ROM/Encryption key.
Also, you can do a forum search for the chinese TWRP, i don't have the link
Good luck.
Click to expand...
Click to collapse
Im absolutely not interested in custom ROMs (I only do rooting of the stock, and for that, as well as for official TWRP ahd OrangeFox, no kind of forkatting any partition is needed)
However, I have asked about Persist partitions just in case
Good luck
zgfg said:
Im absolutely not interested in custom ROMs (I only do rooting of the stock, and for that, as well as for official TWRP ahd OrangeFox, no kind of forkatting any partition is needed)
However, I have asked about Persist partitions just in case
Good luck
Click to expand...
Click to collapse
If you install stock MIUI but from a zip, such as xiaomi.eu is is a custom rom..
Stock is just what come with the phone.
Pupet_Master said:
If you install stock MIUI but from a zip, such as xiaomi.eu is is a custom rom..
Stock is just what come with the phone.
Click to expand...
Click to collapse
Tthank for teaching but I know what the stockk means
My Mi 9T came with v10.3.12 PFJEUXM, updated by OTA to v11.0.3 PFJEUXM and then again by OTA to v11.0.4 QFJEUXM.
Alll syock firmwares, no eu weekly ROMs and no AOSP ROMs (only debloating by ADB, twrp.me davincii TWRP, OranfeFox, Canary Magisk root and modules)
Instead of this OT discussion, I still did not get answers for sone originally asked questions but please nwm(for example about flashing from Fastboot the disk-dumped Persist.img)
Good luck and goodbye
zgfg said:
Tthank for teaching but I know what the stockk means
My Mi 9T came with v10.3.12 PFJEUXM, updated by OTA to v11.0.3 PFJEUXM and then again by OTA to v11.0.4 QFJEUXM.
Alll syock firmwares, no eu weekly ROMs and no AOSP ROMs (only debloating by ADB, twrp.me davincii TWRP, OranfeFox, Canary Magisk root and modules)
Instead of this OT discussion, I still did not get answers for sone originally asked questions but please nwm(for example about flashing from Fastboot the disk-dumped Persist.img)
Good luck and goodbye
Click to expand...
Click to collapse
fastboot a disk dump persist.img will cause you to lose DRM, i did it my self and i lost.
Pupet_Master said:
fastboot a disk dump persist.img will cause you to lose DRM, i did it my self and i lost.
Click to expand...
Click to collapse
What about
Code:
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
to backup and
Code:
dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist
to restore?
That's how I did it with my Moto G5+. Later the official TWRP recovery for that device had checkmarks for persist and efs too.
Edit: Sorry,I've seen that @zgfg posted that method so follow his steps:
https://forum.xda-developers.com/mi...ck-boot-recovery-images-t4058447/post81871363
Sent from my Moto G5 Plus using XDA Labs
You will lose DRM even with "dd" to restore (tested on Mi Mix 3 5G)
Hi guys.
I saw a highly recommended post on rooting an Asus Zenfone Max 2 Pro(https://forum.xda-developers.com/t/...t-asus-zenfone-max-pro-m2-unofficial.3885457/
Unfortunately , I saw it after I had already unlocked the bootloader using the UnlockDevice.apk tool from Asus' official website. Hence , the steps for rooting are now confusing since in that guide I have to use unlocker to install Magisk and root.
I want to know how to now root my phone now that I've already unlocked the bootloader , I just need help with the rooting part. Please help me out , I really need to recover some data that I lost when I factory reset , and the recovery tool I downloaded is saying root access is needed to deep scan and find those files.
I'm running a stock Android 9.0