Database Users

Touchflo/manila version numbers

I have done (and will continue to do) some searching, but I can't find the answer to this particular query:
I can find 2 places where the version number of Touchflo is stated, and they're different.
In the "HTC Touchflo Interface" - ie the main finger-usable swiping interface, if I go to the SETTINGS tab, and look down to "About" - I have TouchFLO 3D 1.3.35350.1_1630.38
BUT
In the "Windows Mobile" interface - if I go to "Settings" > "System" > "TouchFLO" > "About" - I have "Version 3.0 (Build 32567).
So we have 1 confusion there.
If a developer has made an app for "Manila v 2- 2.5" (for example) - which of the two numbers in my system do I refer to??
As I said, I have searched for this but have been unable to find a diffinitive answer. Are these two version numbers that I have for two different programs? (one supporting the other maybe??)
Can someone please explain this? It would be very useful to know what these version numbers refer to properly before getting interested in an app that someone has developed.
If it helps - my Touch HD was from Orange UK and I haven't done anything "major" to it apart from a few UI alterations (No_Curtains, MaxTFDTheme, tsowens_taskbar) and some minor registry edits (via the AdvancedConfig AEButton+, HDTweak add-ons) (and a fair bit of software. )

TouchFLO numbering
If you're using a stock ROM the 1.3 number you see is the Manila. Cooked ROMs have the recently released revamp of Manilla which is 2.0 or 2.1 (and even the unreleased 2.5).
The other number for TouchFLO I believe is to do with the kinetic scrolling capabilities making the interface finger friendly rather than stylus/scrollbar.
Someone with more/better knowledge may be able to tell you more (or correct me!)

Riceburner said:
I have done (and will continue to do) some searching, but I can't find the answer to this particular query:
I can find 2 places where the version number of Touchflo is stated, and they're different.
In the "HTC Touchflo Interface" - ie the main finger-usable swiping interface, if I go to the SETTINGS tab, and look down to "About" - I have TouchFLO 3D 1.3.35350.1_1630.38
BUT
In the "Windows Mobile" interface - if I go to "Settings" > "System" > "TouchFLO" > "About" - I have "Version 3.0 (Build 32567).
So we have 1 confusion there.
If a developer has made an app for "Manila v 2- 2.5" (for example) - which of the two numbers in my system do I refer to??
As I said, I have searched for this but have been unable to find a diffinitive answer. Are these two version numbers that I have for two different programs? (one supporting the other maybe??)
Can someone please explain this? It would be very useful to know what these version numbers refer to properly before getting interested in an app that someone has developed.
If it helps - my Touch HD was from Orange UK and I haven't done anything "major" to it apart from a few UI alterations (No_Curtains, MaxTFDTheme, tsowens_taskbar) and some minor registry edits (via the AdvancedConfig AEButton+, HDTweak add-ons) (and a fair bit of software. )
Click to expand...
Click to collapse
Well first off latest version of manila available on cooked roms is only manila V2.5, though I believe V2.6 has just been leaked but not on any roms yet
Looks like your using a stock rom with manila 1.3
If you go to settings tab and scroll down to 'About' it should state correct manila version. Mine states 2.5.19172632.0, i.e. manila 2.5
If a developer refers an app to manila V2.0, V2.1 or V2.5 you refer to info in settings tab

Fallen Spartan said:
Well first off latest version of manila available on cooked roms is only manila V2.5, though I believe V2.6 has just been leaked but not on any roms yet
Looks like your using a stock rom with manila 1.3
If you go to settings tab and scroll down to 'About' it should state correct manila version. Mine states 2.5.19172632.0, i.e. manila 2.5
If a developer refers an app to manila V2.0, V2.1 or V2.5 you refer to info in settings tab
Click to expand...
Click to collapse
So the settings tab in the touchflo interface is the important one?
ok, many thanks (and to afr33s ), that does clear up the issue somewhat. Is it worth making reference to this in the wiki somewhere??

[Software] Finansist.PDA v1.2 (24.12.2009)

Finansist.PDA
Hi all!
I glad to show my first project for PPC - Finansist.PDA
Use Finansist.PDA to take account of your finances with the possibility of synchronizing with multiple computers. Program Finansist.PDA offers many functions (some of them are in development) to obtain the current exchange rate from the Internet, show reports, etc.
There are maybe some control layout bugs at different screen resolutions (I've tested at 320*240).
Known bugs and issues:
* After you change the lang - you need reboot application
System Requirements:
* Windows Mobile 5, 6, 6.1, 6.5 (not tested yet)
* DotNet Compact Framework 3.5
Website: http://finansist.chanaev.ru/
Important! To update aplication without lose my data you need copy file MainDB.fdb from path_where_you_install_application\Database\ to any safe place (for example to \My Documents). After that install new version and copy this file back, overwriting existing new file.
Download:
Version 1.0 CAB: View attachment 222095
Changelog:
Initional release with base functions
Version 1.1 CAB: View attachment 222096
Changelog:
If the application installed in a folder other than \Program Files\Finansist PDA\ - required to manually correct the configuration file. Otherwise application don't work.
Controls layout for different screen resolution and layouts
Possibility to add payment into root categories
Cleanup initial database
Category which are curently selected in a category tree goes to New Payment form.
Interface changes in category tree context menu.
Subcategory payments included in output table when category in treeview clicked.
Database errors now also processed by translation module
Autoselect language during first launch
Field «Translated by:» in programm «About» form
Version 1.2 CAB: View attachment 260889
Changelog:
Possibility to set number of displayed rows in the table of payments
Possibility to display payments in subcategories with selected category payments
Possibility to work with many databases. You can disable dialog of database selection and work just with one database. Also you can create, open, compress, delete, set password see database properties and so on.
Database password protection
Many world currencies. For better usability you can select currencies which you use. Non-active will be not displayed in system (for exapmple in account management).
Database versioning. Converting to new format processed automatically without any data lost. This version has database v1. Finansist v1.1 and v1.0 had v0 database.
Possibility to copy databases from PC and back via ActiveSync. First step into records synchronizing. PC client available at the website.
Basic help at english language actually contained general information.
Fixed dates range calculation in Reports
Fixed some crashes in account management
Improvement of internal algorhythms for better perfomance and so on.
Feedback are welcome!
Enjoy =)

Change Currency
Hi, could you tell me how to change the currency???? I use TT$

hmm
Thanks for it

zjxpot, Unfortunately right now there is no possibility to do it. This function is in development stage. I guess it will be avaible as soon as possible.
yonta, you are welcome
2All, I've published new version. See changes and download app from header post.

Password
Hi in menu/option the password box is disabled how do I enable also in new payment regular payment is disabled how to enable or are those option for future use??? btw nice program

Finansist PDA v1.2 has been released after long time pause. Many changes in code, some new feautures and improvements. Work with PC as main feature must simplify process of money tracking and reporting. Don't forget about backup data at your device before first sync. List of changes is in header. Enjoy.
zjxpot, new version support many currencies

chanaev said:
Finansist PDA v1.2 has been released after long time pause. Many changes in code, some new feautures and improvements. Work with PC as main feature must simplify process of money tracking and reporting. Don't forget about backup data at your device before first sync. List of changes is in header. Enjoy.
zjxpot, new version support many currencies
Click to expand...
Click to collapse
Thanks for your work, I will check it out, All the best during this holiday season to you and your family

congrats on the new version

Fouond Some Test Codes

FYI These codes have been obtained by decoding various .apk files present in the phone firmware.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.

Nice..!
Sent from my HTC Desire using XDA App

Thanks bro for the good info.
Sent from my HTC HD2 using XDA App

i have been testing them on different builds but only some seem to work ...like the gtalk one give great stats

You've straight plagarised all this information from one of my old internet buddies, Vishal Gupta. At least give some credit.
Proof: http://www.askvg.com/google-android-hidden-secret-codes/

actually i got it from ipmart forums and as i said found i didn't say create

Proof: http://www.askvg.com/google-android-hidden-secret-codes/[/QUOTE]
that was actually a better guide you should of posted that instead of mis-spelling plagiarized

thanks for the infos ^_^
-------------------------------------
My FroyoStone is Non-Sense

thatruth132 said:
that was actually a better guide you should of posted that instead of mis-spelling plagiarized
Click to expand...
Click to collapse
You're a senior member. You should know that giving credit to those who produce is an important part of this community. Also your title has a typo if we're going to go down that road.

marixsmith said:
You're a senior member. You should know that giving credit to those who produce is an important part of this community. Also your title has a typo if we're going to go down that road.
Click to expand...
Click to collapse
as i said i got it from another software site and as i see they got it from some where
themselves, but as for the typo thing ...lol you got me

@thatruth132,
If you are not the creator of such guide, even if you don't know who the original source is, you should credit the source where you obtained it from. In this case, you should point out that you are reposting this guide created by user (insert username here) from ipmart. That is the correct way of reposting guides. Please fix your first post to include this information.
@RJackson,
He may not know the actual origin of the guide, so plagiarism may be a bit of an overkill when accusing him.

i didnt want to post the site because its a warez site so how do i go about doing that , please and thank you

thatruth132 said:
i didnt want to post the site because its a warez site so how do i go about doing that , please and thank you
Click to expand...
Click to collapse
I appreciate your support and don't blame you and don't care others who blame you. Keep going and thankyou sir.

thank you but i am loyal to this site so i follow the rules ...its not
a biggie i was just a little certain i would of got in trouble for linking the site

thatruth132 said:
i didnt want to post the site because its a warez site so how do i go about doing that , please and thank you
Click to expand...
Click to collapse
Good point. Maybe you can simply thank the user on that site without mentioning the site itself...
ie,
Thanks xyw for the information.... or something along these lines...
Thank you for complying with the rules... this is refreshing to see once every now and then

[APP][O/C] WiMoSpeed: Hopefully soon on Diamond!!!

Have you ever heard about this? Awesome! Processor up to 750Mhz and stable!
Here is the 1st post:
iwfratz said:
CAUTION !!!
- USE THIS TOOL AT YOUR OWN RISK !!
- Overclocking your cpu may damage your device.
- Before autostarting the app be sure that your device will not hang.
- backup is always recommended !!​
DESCRIPTION :
WiMoSpeed lets you change the CPU-speed. In opposite to other tools, even to the predecessor OverClockTool (OCT), it manipulates the values WM uses for clock control. So it works reliable on battery and AC without any scripting or active components.​
USAGE :
- Download and install the CAB
- Start WiMoSpeed.exe. If it reports that it cannot identify your ROM: post here
- Select Speed
- Set Speed
- If desired create link (in installation directory) with actual settings
- Exit WiMoSpeed.exe
- Your device still runs with speed you set​
LIMITATIONS
I am working on this in my spare time, beside my job, my mate and some other interest. I own a Rhodium-device only, so I can not reproduce errors on other devices and debugging is very difficult and time-consuming. Be patient.
WiMoSpeed supports Qualcomm MSM7200 (and compatible) and is actually limited to ROMs of
Rhodium,
RhodiumW
Topaz
Blackstone
Whitestone / Imagio
I took all shipped roms I could get and included the information into WiMoSpeed.
!!! If you have a device listed above and WiMoSpeed could not identify your ROM please post here what part of your ROM WiMoSpeed couldn't identify (OEMXIP and / or RADIO-ROM) and include a download-link of your ROM (OS, RADIO) !!! Otherwise I will ignore your post. Thank you.​
TECHNIQUE
Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.
Raising or lowering cpu speed didn't change battery drain or device temperature noticeable. So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.​
thanks to
-all donators for the support
-eboelzner for Sense UI SDK
-dmvandijk for the icon
-the internet ​
TODO-LIST
support for Raphael / Fuze
support for Diamond
Support for
non-HTC MSM7200/7201
non-MSM7200/7201
devices is uncertain.​
Please do not mirror WiMoSpeed !
Version 1.03
- blackstone problem (speed cut in half after sleep) should be solved
- added support for more ROMs
- changes in GUI (you have to create your links again; old ones starts the GUI only)
Version 1.02
- added support for more devices
- added support for more ROMs
Version 1.01
- added support for more OS-ROMs
- added support for more radio-ROM
- new function: restore default speed (528 MHz)
Version 1.00
- Initial release
- Rhodium, RhodiumW
Click to expand...
Click to collapse

Tortel said:
Have you ever heard about this? Awesome! Processor up to 750Mhz and stable!
==> WiMoSpeed: Hopefully soon on Diamond...If there is enough demand! So go do some lobbying!
Here is the 1st post:
Click to expand...
Click to collapse
yeah, we all want that. but our devices have a 900mah battery. that means the battery will have lesser life than usual.

TurkoCFW V 1.0 : S5380K (S7250 version Soon)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DDLH1 - Version!
Big Thanks To Ho1od,B.Kubica,cybekteam,mylove90.Dokugogagoji,_King_ and others...
and Big thanks for Badaturkiye Team.[Frager]
Thanks to Nishant and Samsung WaveY for tests
It is my first custom rom named TurkoCFW for S5380K
Here is a custom firmware based on S5380KDDLH1 and release for S5380K only
Default CSC: your country
If it does not install your country, after flash from keyboard: *#272*HHHH# where HHHH is time show on the wave and select your country.
Firmware Version: S5380KDDLH1
CSC Version: S5380KODDLH1
Bada Version: 2.0
Compatible Phone Model: S5380K​
TurkoCFW V1.0 S5380K
: http://www65.zippyshare.com/v/49728516/file.html
Graphical Changes:
ICS style quickpanel
ICS stlye Dialpad
New TurkoCFW 9 theme integrated
New logo added
New edited Wave 3 lockscreen
ICS sound, progress, status indicators and icons have been added.
Settings icons changed as theme
Contacts icon changed as ICS
Blue, corners, oval Warning screen changed. Decorated with turquoise-gray color around!
The top of the symbols of the notification;
Bluetooth, Wi-fi, Signal, Charging, Music player, Play / Pause, Memory Card, Audio Options, Connection type and Alarm clock icons renewed!
Changelog:
-NOT Support Chinese quick panel (I'd remove it because it had Wi-Fi bug)
- Changed Java icons to compatible default theme also names fixed
- Changed Setting Menu Icons as theme compatible
- Added Opera Mini 7,SonID,Facebook java,eBuddy,Google Maps,BlueFTP to main menu
- GPS activated default
- Data activated default
- New LaFleur theme added
- Activated Battery Percentage
- Now you can record sound as *.mp3
- Added Applemint font
- Browser mod of Dolphin included
- Choosable Java app main menu configurations
- Fm Radio Is Working Without Earnphone Connection
- Show hidden storage on windows explorer (IntSys) )
- You can record a call
- Deleted All default pictures.And changed other one
- Deleted Analog Clock,Calendar and Memo Widgets
- Added Iphone and Blackberry ring tone
- This time firmware based on latest S5380K firmware
- There is only two language available.(English-Korean)
- CSC & ShpApp &FFS Reduced
- Added Search button to the main menu, as bada 1.2
- China, Korea and Asian symbols has been deleted for Ram (only CSC V2)
- Deleted Caster,Music hub and IM
- Remove pdf file, widgets, gadgets from hold bada 1.x
- Custom for GPS
- Chat On are available on market!
- Default Start Year 2013 Default
- Help Windows Disabled
- Reduced number of home screens to 1
- Changed app arrangement on homescreen
- Changed app arrangement in main menu
- Battery percentage enabled Default
- Sleep Time 1 Min Default
- Maximum use of 5 Java apps same time
- Maximum SMS / MMS increased 300/200
- MMS Resized Image to 7 mb previous it was 3 mb, size of attachment to 10 mb previous 5 mb
- Backlight time 15sec default
- Motion Shake,Tilt and Turn over OFF default
- Default App Instalation MMC
- Bluetooth remote SIM mode activated
​​
Screen Shots : http://forum.xda-developers.com/showpost.php?p=38296823&postcount=2
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CSC Preconfiguration files in this CFW S5380K
:
CSC_S5380K_Hero355_TurkoCFW.csc:
Languages: English, Korean,
CSCs: KOR, ETR, NPL, SLK, TML, INU, INS
Click to expand...
Click to collapse
For now it is only Support S5380K versionBut Will work on any version.Soon I'll add other versions like S5380D,F,G,Y and normal versions and other languages too.Just give me only time
Click to expand...
Click to collapse

ScreenShots !!

Wave 1 Market and Extra apps !!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Wave 1 store:
With flash this file,you can go Wave 1 store,and download Wave 1 apps,themes and etc, which isn't on S5380K store
You need to download and flash apps_compressed as compatible with your phone
You won't lose data
Wave 1 store for GT-S5380K WAVE Y : http://www63.zippyshare.com/v/95250453/file.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extra apps:
If you want MSN,MusicHub or Yahoo office you need to download below for your phone model and flash all one by one
GT-S5380K WAVE Y - MSN : http://www63.zippyshare.com/v/7567233/file.html
GT-S5380K WAVE Y - MusicHub : http://www63.zippyshare.com/v/55585513/file.html
GT-S5380K WAVE Y - Yahoo : http://www63.zippyshare.com/v/17761594/file.html
GT-S5380K WAVE Y - Viber : http://www44.zippyshare.com/v/20426520/file.html
​

Installation !!
Backup your files
Take out SIM and SD card
Go to download mode with these combinations
Call end + Vol down + Menu
Connect USB to PC
Open Multiloader 5.65 or 5.67 and Follow picture
Port Search and Download

If you want to Share it on any blog,Please give credit !!
12. Using the work of others.
If you are developing something that is based on the work of another Member, you MUST first seek their permission, and you must give credit to the member whose work you used. If a dispute occurs about who developed / created a piece of work, first try to settle the matter by private message and NOT in open forum. If this fails then you may contact a moderator with clear evidence that the work was created by you.
Convincing evidence will result in copied work being removed. If there is no clear evidence you created the work then in the spirit of sharing all work will remain posted on the forums.
As an addition, developers have the right to hold exclusivity over their work for as long as it is deemed necessary by the dev or freely share it. However, if the work is claimed as exclusive, it must remain as such. No selective sharing will be allowed (ie allowing certain people to use it and not others). Should the dev decide to start sharing the work with others, the work automatically becomes fair game for all to use.
In regards to permissions, same rules remain for this but if permission was already given, unless there is a very valid reason, it cannot be revoked (same applies to major updates on the work). Under that same premise, permissions cannot be denied unless the work is exclusive or under severe circumstances.
In plain English: If you want to keep your work exclusive, go for it. However, if you are going to share your work, do it fairly.
These rules apply to all software posted on XDA (including but not limited to ROMs, RUUs, apps, games, kernels, themes, icons, etc) unless that software comes with a license that waives these rules.
Click to expand...
Click to collapse
Enjoy !

Good job but what's about Wave M version?

Cnc Lss said:
Good job but what's about Wave M version?
Click to expand...
Click to collapse
Soon my friend

@Cnc Lss I have made some modification for S7250,Just for test.
Can you test it ? If yes,tell me
If other S7250 user available Please Contact me
Link Only PM yet.
Thanks

@hero355 you is the best, try put more linguages. and more CSC.
and change the userAgent (this work social hub, the best)
Code:
Mozilla/5.0 (SAMSUNG; SAMSUNG-GT-S5380B/Linux; U; Android 2.3.3; pt-br) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1
your work is really the best.

@up İs there any tester available for Samsung Wave M (GT-S7250) ?
rafaelvasconcelos said:
@hero355 you is the best, try put more linguages. and more CSC.
and change the userAgent (this work social hub, the best)
Code:
Mozilla/5.0 (SAMSUNG; SAMSUNG-GT-S5380B/Linux; U; Android 2.3.3; pt-br) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1
your work is really the best.
Click to expand...
Click to collapse
Will add it in the next days

hero355 said:
@up İs there any tester available for Samsung Wave M (GT-S7250) ?
Will add it in the next days
Click to expand...
Click to collapse
thanks bro.
try add this on thread
http://www.mediafire.com/?5g4sn9mubb57y8o
this is made by me, this change samsung apps to wave m, to download more fonts, and text to speech.
(this install viber and change konaconfig)

If somebody has an idea how we can install ugly Samsung Apps aka Kona more then 1 time... We could simple text tweak... KonaConfig.ini
http://forum.xda-developers.com/showpost.php?p=29173895&postcount=43
Best Regards

adfree said:
If somebody has an idea how we can install ugly Samsung Apps aka Kona more then 1 time... We could simple text tweak... KonaConfig.ini
http://forum.xda-developers.com/showpost.php?p=29173895&postcount=43
Best Regards
Click to expand...
Click to collapse
konaconfig.ini really work, and this is so good.
see:
Code:
#KonaConfigSection
KonaC0=http://hub-odc.samsungapps.com/ods.as
KonaC1=0
KonaC2=210.118.57.11
KonaC3=http://apps-dn.stg.ospserver.net
KonaC4=http://210.118.57.13/ods.as
KonaC5=/Home/Img/
KonaC6=/Home/App/
KonaC7=/Home/Doc/
KonaC8=/Home/Temp/
KonaC9=
KonaC10=[I]404[/I] [I]this work, see all mcc http://en.wikipedia.org/wiki/List_of_mobile_country_codes[/I]
KonaC11=
KonaC12=[B]GT-s7250 [/B] this work, but GT-[B]s[/B]7250
KonaC13=
KonaC14=
KonaC15=
KonaC16=http://in-odc.samsungapps.com/ods.as
KonaC17=0
KonaC18=6
KonaC19=000000173796
KonaC20=http://img.samsungapps.com/display/2013/0422/0304/uploadfile_20130422030458893.png
KonaC21=0
KonaC22=[B]404[/B] [B]MCC[/B] u can change this, but without SIM card.
KonaC23=3
KonaC24=ZTO
KonaC25=
KonaC26=1
KonaC27=0
KonaC28=168.219.61.250:8080
KonaC29=5120
KonaC30=http://210.118.57.15/ods.as
KonaC31=http://210.118.57.9/ods.as
KonaC32=0
KonaC33=1
KonaC34=IND
KonaC35=0
KonaC36=
KonaC37=
KonaC38=0
KonaC39=0
KonaC40=7
KonaC41=0
KonaC42=0
KonaC43=0
KonaC44=
KonaC45=
KonaC46=
KonaC47=0
KonaC48=__DUMMY_BANNER_TOKEN__
KonaC49=60
[B]KonaC50= EMAIL[/B] [I]to download form china store :) (but need logout ID in settings)[/I]
KonaC51=[B] PASSWORD[/B] [I]from ID samsung apps.[/I]
KonaC52=1

@adfree see i put store of model from korea.
this work in my wave y, but need update, can't update, if not my samsung apps dont work.
but any wave 1 2 or 3 , can try.
change the line in konaconfig.ini(with tk or sTune)
Code:
KonaC10=450
Code:
KonaC12=SHW-m410k
BUT need acc from korea, i cant create by kies, need anyone from korea to create.

rafaelvasconcelos thank you very much. :good:
All I have tried before I have failed...
Here my short test result...
http://forum.xda-developers.com/showpost.php?p=40718123&postcount=62
Later more... in other Thread...
I do some tests...
Best Regards

adfree said:
rafaelvasconcelos thank you very much. :good:
All I have tried before I have failed...
Here my short test result...
http://forum.xda-developers.com/showpost.php?p=40718123&postcount=62
Later more... in other Thread...
I do some tests...
Best Regards
Click to expand...
Click to collapse
dude, never thought I receive a "thank" of you.
always entered at XDA but never commented, just saw what was happening, and said, our this adfree knows everything. not only you, hero 355 also. Thank you. :laugh:
in my wave, it was 5380B, only worked in Brazil. Brazil and the store does not have all applications (mostly games) I saw at kies in other stores, but mine was 5380B was not recognized by other stores. I started using the tk and began to understand the functioning of the samsung apps. I went and found the konaconfig. that was when I analyzed all lines until I saw the line KonaC22 = 724. and said already heard of 724, remembered that it was setting YES, oh I changed that line to another country. I entered the samsung apps, and asked me to accept the term (of Brazil yet) but then after much trying, I removed the SIM and tried again. and it worked, I could download apps from other countries by this method. but I saw that this method was boring because not everyone has wifi. I went and got in his XDA and saw thread, and found a way to change the C10. oh everything improved. fast and better. but I wanted more, I saw it in the store by kies china has many applications (only in China) have created an ID and could not change my ID since appeared (error processing) after much trying, I managed to login. and saw that the email was in C50 and C51 password.
still has the story of how I saved the applications folder without encrypting the info. has also started to edit the lockscreen. how to change user agent. and many other things.
sorry my bad english.

http://forum.xda-developers.com/showpost.php?p=40719773&postcount=34
Here is "new" Kona... slightly different KonaConfig.ini
Best Regards

hero355 said:
Soon my friend
Click to expand...
Click to collapse
... you are doing great job @psycoy

S4 Style TurkoCFW for Wave Y and first Custom rom for S7250 (Wave M) is coming 1-2 days...

Is there any S5380 or S5380D (European models) user available ?