Convert Moto X 2014 XT1097 from Claro PR to Pure Edition XT1095 & update to Lollipop
Warning: Proceed with caution. I'm not responsible for any damage on your devide. You need to unlock the bootloader on Motorola site first. No root needed. Again I am not responsible for any damages/brick of your device. Only for XT1097 from Calro Puerto Rico. Tested several times on my devices. Working 100%. Follow steps to a T.
You need to have Motorola Drivers Installed, download them from Motorola Site.
ADB/FASTBOOT Is already provided on folders. If you have any issues with ADB/FASTBOOT use my One-Click Installer follow link on signature.
Instructions:
All is automatic using batches provided:
1. Enable Developers options by tapping 7 times on build number on Settings\About Phone\Build Number
2. Connect device to PC and enable developer options when prompted for trusted device check the box and tap OK/Continue
3. Go to XT1095 folder and Run CONVERT_TO_XT1095.BAT let the process finish.
4. When device boot up enable developers options again if needed. Don't worry for the Unknown Baseband Version yet.
5. Go to OTA 5.0 Release folder and run SIDELOAD_OTA.BAT follow instructions on batch.
5. When device finish proccess and boot up go to step 6.
6. Go to MODEM_AMXPR and run FlASH_CLAROPR_MODEM.BAT to restore Stock Modem from Claro and get signal. go to step 7.
7. To get rid of Bootloader Unlock Warning at boot go to folder LOGO and run FLASH_LOGO_NO_WARNING.BAT let it finish and enjoy Lollipop.
Note: You can receive Moto X Pure Edition OTA's now as long as you are not rooted or modified BUT after installing them you need to run step 7 again to flash back Claro Puerto Rico modem.
to go back to Full Stock from Claro run Batch on folder AMXPR_XT1097 and you are back to full Stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download RAR: MEGA
Since sbf droid dev site is down, Here is my collection of Moto X 2nd Gen firmwares. Enjoy.
https://mega.co.nz/#F!hlUgjCCT!WybvLAs1RPWDyPupB7kEug
Great guide man! thanks. I supposed this works for the Claro Chile version, right?
titotito1983 said:
Great guide man! thanks. I supposed this works for the Claro Chile version, right?
Click to expand...
Click to collapse
You need to replace the AMXPR firmware with your region one. Copy paste modem and sfg.bin from your firmware to the modem folder also. And it works.
Omar04 said:
You need to replace the AMXPR firmware with your region one. Copy paste modem and sfg.bin from your firmware to the modem folder also. And it works.
Click to expand...
Click to collapse
Great! thanks again!
titotito1983 said:
Great! thanks again!
Click to expand...
Click to collapse
When replacing files with the ones from your region pay attention if your firmware system image files are sparse chunks or system.img if the latter edit script and delete all "fastboot flash.... sparsechunk.x" commands there are 5 from 0 to 4 and add this one instead "mfastboot flash system system.img" and save it.
Omar04 said:
When replacing files with the ones from your region pay attention if your firmware system image files are sparse chunks or system.img if the latter edit script and delete all "fastboot flash.... sparsechunk.x" commands with "mfastboot flash system system.img"
Click to expand...
Click to collapse
All right! thanks again man
Nextel Brazil
Hi Omar04,
The rom "NIIBR_XT1097_4.4.4_KXE21.187-30.3_cid12_CFC.xml.zip" works on a Moto X 2014 2nd generation BRAZIL? If this works, I need to do something else at the time of flashing the rom? Thanks.
Claro chile
thanks everything went perfectly
Lucas.s.santos94 said:
Hi Omar04,
The rom "NIIBR_XT1097_4.4.4_KXE21.187-30.3_cid12_CFC.xml.zip" works on a Moto X 2014 2nd generation BRAZIL? If this works, I need to do something else at the time of flashing the rom? Thanks.
Click to expand...
Click to collapse
AFAIK you can use any Moto X 2nd Edition Brazil or XT1095 ROM as long as you use the correct baseband.
Thanks
How can I modify the procedure to work on Wind Mobile version of the phone from Canada.
Thanks
@Beast11
There's also numerous stuff in the att 1097 thread and the telus 1097 thread. I'm on telus and followed this guide. Super easy. Just time consuming
http://forum.xda-developers.com/showthread.php?t=2972693
(GUIDE) XT1097 to XT1095 Nextel and others.
Sent from my XT1095 using Tapatalk
proper69 said:
@Beast11
There's also numerous stuff in the att 1097 thread and the telus 1097 thread. I'm on telus and followed this guide. Super easy. Just time consuming
http://forum.xda-developers.com/showthread.php?t=2972693
(GUIDE) XT1097 to XT1095 Nextel and others.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Wow... completely missed that. Thanks!
Beast11 said:
How can I modify the procedure to work on Wind Mobile version of the phone from Canada.
Thanks
Click to expand...
Click to collapse
You can use it on any Moto X 2nd Edition device you only need to replace AMXPR folder contents with your carrier firmware files. And put a copy of your carrier firmware modem files on the modem folder to replace with yours too.
Pay attention to firmware if it's using system as sparsechunks don't need to edit batch.
Related
Download
Mega Mirror: Blur_Version.210.12.40.falcon_umts.Brasil.en.BR.zip
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Note: You must have this firmware installed first
RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF
Update:
Here is the Bootlogo with the Unlocked Message removed.
Download
View attachment lollipop_fixed_logo.zip
Instructions
Extract the logo.bin and flash with fastboot or mfastboot in bootloader mode
Command: mfastboot flash logo logo.bin
Thank Youuu!!!
Can this be installed on any XT1032?
I think only in Retail Brazil
AgentChaos said:
Download
Mega Mirror: Blur_Version.210.12.40.falcon_umts.Brasil.en.BR.zip
Screenshot
View attachment 3130428
Special Note: You must have this firmware installed first
RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF
Click to expand...
Click to collapse
Okay,you're being a little coy. As the thread title specifically states XT1032,you do realize that you'll now cause a feeding frenzy to download the OTA and Brazilian 4.4.4 XT1032 KitKat firmware?
flyjazz said:
Okay,you're being a little coy. As the thread title specifically states XT1032,you do realize that you'll now cause a feeding frenzy to download the OTA and Brazilian 4.4.4 XT1032 KitKat firmware?
Click to expand...
Click to collapse
Meaning what exactly?
XT1032 users deserve some Lollipop sweetness as well
Tutorial in Portuguese http://www.motoforum.com.br/tutorials/article/77-romota502-moto-g-lollipop-50-xt1032/
Credtis AgentChaos
AgentChaos said:
Meaning what exactly?
XT1032 users deserve some Lollipop sweetness as well
Click to expand...
Click to collapse
It's very kind of you to share the XT1032 OTA,thank you!. I would have thought you might have added some additional thoughts and suggestions for installing the OTA. A mirror for the BR 4.4.4 would have been helpful too,as many users are on other 4.4.4 firmware.
AgentChaos said:
Download
Mega Mirror: Blur_Version.210.12.40.falcon_umts.Brasil.en.BR.zip
Screenshot
View attachment 3130428
Special Note: You must have this firmware installed first
RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF
Click to expand...
Click to collapse
Could you upload a nandroid backup of this ROM
Specker_ said:
Tutorial in Portuguese http://www.motoforum.com.br/tutorials/article/77-romota502-moto-g-lollipop-50-xt1032/
Credtis AgentChaos
Click to expand...
Click to collapse
For those like myself that don't read Portuguese,here's the Google translation of the tutorial:
Download the required file and copy the OTA to the device's internal memory.
Now the device, go to Settings> About Phone> System Updates.
Will the message of a new update found. Just confirm and start the update.
The device will reboot and start the update process, just wait for the process to finish.
When finished, the device will restart and voila, you are using the final version of Lollipop 5.0.2
Obstructive advise after making the upgrade to Lollipop, go Configure> Backup and Reset> Restore Factory Data and confirm. So you can avoid getting bugs or possible traces of KitKat files.
(Warning: this will erase everything that is on the device, including in internal memory, save your stuff on the computer before doing this).
Okay, now just set the machine, put your Google account and finally enjoy the official Android Lollipop.
Thanks, do I need to rename the file to "210.12.40.falcon_umts.Brasil.en.BR.zip" ?
gnhuy91 said:
Thanks, do I need to rename the file to "210.12.40.falcon_umts.Brasil.en.BR.zip" ?
Click to expand...
Click to collapse
I'm currently installing the downloaded OTA. There seems to be more than one way to install it. In my case,I'm installing it in recovery and so far,so good. There's no need to rename the file. You could also use the alternate method to install,which is to check for updates in the settings. I had to download the BR 4.4.4 firmware first,made a mistake and downloaded the wrong 4.4.4 the fist time and was getting errors while trying to install it in recovery. The wrong firmware will not give an available update from the OTA in memory from settings. Be careful if you're downloading the firmware,it must be the exact XT1032 BR 4.4.4 firmware as stated in the OP.
For those looking for the 4.4.4 ROM you need for this OTA:
Goto http://goo.gl/kKhvtj and download "XT1032_RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF.xml.zip"
You should be able to follow these instructions to flash it:
http://forum.xda-developers.com/showthread.php?t=2542219
You device should then be ready to update using the OTA file
It is not very smooth for me, I installed the firmware and update but at various times subject to delays in the interface and some apps do not work properly as GNL :/
cristiand391 said:
It is not very smooth for me, I installed the firmware and update but at various times subject to delays in the interface and some apps do not work properly as GNL :/
Click to expand...
Click to collapse
Same here. It seems like GPE 5.0.1 runs smoother than Motorola 5.0.2 Brasil.
Dual Sim BR OTA XT1033 BR
http://www.mediafire.com/download/d...sion.210.12.40.falcon_umtsds.Brasil.en.BR.zip
MD5: 0E3805710AA6FCA629556EEBC5CCBD65
ddiuit said:
Same here. It seems like GPE 5.0.1 runs smoother than Motorola 5.0.2 Brasil.
Click to expand...
Click to collapse
Try doing a factory reset after flashing OTA. Mine its running smoothier than with 5.0.1 GPE.
I have the US stock rom in my phone, can I install this Br stock ROM and the return to U S stock when this are released??
I'm on GPE Lollipop, what is the procedure I should follow to install this?
I have an issue, i downloaded the 4.4.4 required for this OTA, flashed, copied the OTA to the SDCARD of the phone and then tried to update but it keeps saying that i'm up to date.
I'm missing something?
EDIT: It's necessary to Update Motorola OTA app from Play Store in order to recognize the ZIP in the SDCARD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Guide
XT1058 (Brazil Retail)
Download the OTA, by phone or by computer and place within the device's root folder
Rename file to Blur_Version.221.41.31.ghost_row.Brasil.en.BR.zip
Place the file in the internal memory
Look for updates, if not found, restart the phone
Wait for the update, and when you start is with Lollipop 5.0.2
When you start, do not put your account yet, skip, and reboot to factory settings
When starting after the reset, configure your account and enjoy!
XT1058 (US Rogers)
Unlock your bootloader
Use RSDLite to flash stock 4.4.4 Brazil Retail
Put OTA*. zip file on internal memory
Reboot to recovery mode
Select update from sdcard
XT1052 (EU Retail)
Download and Install stock 4.4.4 Brazil Retail
Put OTA*. zip file on internal memory
Look for updates, if not found, restart the phone
Reflash gpt.bin and NON-HLOS.bin from stock 4.4.4 XT1052, use commands:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Download
[MOD EDIT:]SHAME SHAME SHAME. Signing an NDA means you're agreeing to not share details of the special program you are in.
This has been removed at the request of Motorola due to your negligence in violating the terms of your agreement.
[DARKTERMIT EDIT:]I'm not signed NDA
Screenshots
it can only be used on xt1058 or even xt1052 can use this?
could it work on XT1053?
I can confirm this works on Rogers XT1058
I've just installed on mi XT1058, my device is from CLARO Peru, but it was running a 4.4.4 brasilian firmware. Everything seems to be working well. Just wanted to let you guys know .
So jealous. Really want it.
Have a xt1052 retail GB 4.4.4, would this work for it? Bootloader has been unlocked. Was originally xt1052 O2.de.
What does the "de" stand for? Deutschland or dev edition. Box language is in german. Would having changed to retail GB be better for getting official 5.0.2 update?
you have to be root and move the file to the internal memory?
this does not imply a stock recovery ?
I have the XT1058 model running stock 4.4.4 KK, but it's rooted and I'm using the TWRP, does I need the stock recovery or unroot the phone?
Anyone tried on stock Telcel firmware?
No love for xt1060?
change to stok telcel for stock retail brasil
cambia a stok retail brasil paisano soy de los mochis
lowvolt1 said:
No love for xt1060?
Click to expand...
Click to collapse
Carrier specific models won't get it till the Carriers authorize it. If I recall, the XT1060 is VZW. Right now GSM carrier free ones such as the XT1053 and XT1058 are getting it.
hello
someone can said me if is possible set italian language
nks
So won't work on At&t model?
Sent from my XT1058 using XDA Free mobile app
Updated the first post
MarcquisDale said:
So won't work on At&t model?
Sent from my XT1058 using XDA Free mobile app
Click to expand...
Click to collapse
I just flashed it on my AT&T xt1058 and everything appears to be working fine - celular, LTE. I use the phone on AT&T's network. I followed the instructions and flashed to 'XT1058_RETAIL-BR_4.4.4_KXA21.12-L1.26_52_cid12_CFC_1FF', then 'Blur_Version.212.44.26.ghost_row.Brasil.en.BR.zip' (e.g. 5.0.2).
Note, I unlocked my bootloader with Sunshine when I was on 4.2.2 - if you're on 4.4.4, then as far as I know, there's no way to do it.
what about performances? and battery?
bart.found said:
what about performances? and battery?
Click to expand...
Click to collapse
i'll let you know once i use it for a day or two.
OK I will try in my xt1053 just one question it will wipe the phone? Because I don't get it with the step 6
DMechnikov said:
I just flashed it on my AT&T xt1058 and everything appears to be working fine - celular, LTE. I use the phone on AT&T's network. I followed the instructions and flashed to 'XT1058_RETAIL-BR_4.4.4_KXA21.12-L1.26_52_cid12_CFC_1FF', then 'Blur_Version.212.44.26.ghost_row.Brasil.en.BR.zip' (e.g. 5.0.2).
Note, I unlocked my bootloader with Sunshine when I was on 4.2.2 - if you're on 4.4.4, then as far as I know, there's no way to do it.
Click to expand...
Click to collapse
Ok thanks
Sent from my XT1058 using XDA Free mobile app
i have a xt1058 in Chile, i can install this without do a factory reset?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The wait is over, now I am offering to you the Motorola official Lollipop 5.1 for the MOTO G 4G Peregrine!
This ROM is an official Moto G 4G, the file was captured during the OTA update!
Special Thanks by capturing the OTA: Antonio Diogo Junior/Raphael vikking
NOTE: You do not need unlocked bootloader. Functional in linked unit.
No user liable for any damage that may occur to your phone. Do so at your own risk.
>> Requirements:
- Being in the ROM 4.4.4 Stock and Stock Recovery.
- System Version 21:11:56! To check go to Settings> About phone.
- ZIP OTA 5.1 Moto G 4G.
- Battery with at least 60% charged.
IIf your system version is not 21:11:56
May be to give error, just make KK 4.4.3 downgrade: https://mega.co.nz/#!FFZQkTSJ!lW6LmkYbgQ-oO9b-Q7t2KN9CMLTRaeP1oKaa1PQXtmQ
Then download via OTA 4.4.4
Download the ZIP Lollipop 5.1 Moto G 4G RETAIL:
Option 1: https://mega.co.nz/#!MAxEDBab!udqI61zisFqpdv8dAGzjOj2CUksdT5BBXmpwR4elDeo
Option 2: https://mega.nz/#!CJI0lbxK!udqI61zisFqpdv8dAGzjOj2CUksdT5BBXmpwR4elDeo
After conforms to the above requirements, Let's get started!
>> TUTORIAL:
1. Place the Zip 5.1 file in the root of your phone or in internal memory.
2. Restart your phone and enter bootloader mode by pressing the Power button + Volume Less for about four seconds and release then will open an options menu.
3. Now with Less Volume scroll down to the recovey option and press the volume More button.
4. Wait until a fallen little robot, when it appears press the Volume button + More Power button for about 10 seconds then will show the recovery options.
5. Now with the files in the device's internal memory down with less volume button and select the APPLY UPDATE FROM SDCARD option, now look at the ZIP file of the update and select it.
Now just wait for the update process to be finalized.
PRINT PEREGRINE Lollipop Android 5.1:
If you liked your like and comment
Note: if you flash this and you don't have the Brazil variant of this phone, you're gonna have a bad time.
You will have a bricked phone.
gr3ud said:
And why can´t you post that in the Firmware thread ?
This has nothing really to do with development ?
I guess you are not an Motorola official right, or in any case related to Motorola, to bring us fixes or tell them what´s not working and so on ?
If every country get its OTA and you make for every OTA an own thread... how pointless is that ?
No offense but this section is for custom ROM development mainly and not just for simple firmware updates without active support, IMO ^=^
Click to expand...
Click to collapse
It's better than talking about this in CM12 thread like they were. I find that extremely disrespectful. You get somebody willing to put that much work into our device and then people like this were posting in his thread with instructions on stock 5.1, which will be crap regardless. You can upgrade a turd all you want, it will still be a stock turd.
Sent from my Moto G 4G LTE (XT1045) Retail US variant
ROM: SaberMod 14.1 (5.1.1) 5/24 build
Carrier: Cricket Wireless
Travisholt92 said:
It's better than talking about this in CM12 thread like they were. I find that extremely disrespectful. You get somebody willing to put that much work into our device and then people like this were posting in his thread with instructions on stock 5.1, which will be crap regardless. You can upgrade a turd all you want, it will still be a stock turd.
Sent from my Moto G 4G LTE (XT1045) Retail US variant
ROM: SaberMod 14.1 (5.1.1) 5/24 build
Carrier: Cricket Wireless
Click to expand...
Click to collapse
Stock turd, LMAO xD
And wth ? my comment got deleted ? wtf ? free speech / opinion ´n whatnot ? c´mon don't be childish whoever did this, guess a little critisim does not hurt at all lol, kids those days pfff
in recovery xt 1039 can`t install and aborted
Is it possible to do a twrp backup and flash it to a xt1045?
hotbld5 said:
Note: if you flash this and you don't have the Brazil variant of this phone, you're gonna have a bad time.
You will have a bricked phone.
Click to expand...
Click to collapse
You won't have a bricked device (The firmwares, between the XT1039, XT1040 etc. seem to be interchangable), the modem of the device won't work however. Meaning that whatever variant of the peregrine (aside from the XT1040) you flash this on, you'll only have WiFi functional
Here's the link to the 21.31.1 update:
https://mega.co.nz/#!el9WybTK!_8sRSLp_GrA4qa5Yc8fIDkZ1_9PRA7m92wXR6uKT-yo
No need to downgrade to 4.4.3 and OTA to 4.4.4 for those that already are on 4.4.4 21.31.1
Credits to Unkn0wn from Tudocelular
VVieira said:
Here's the link to the 21.31.1 update:
https://mega.co.nz/#!el9WybTK!_8sRSLp_GrA4qa5Yc8fIDkZ1_9PRA7m92wXR6uKT-yo
No need to downgrade to 4.4.3 and OTA to 4.4.4 for those that already are on 4.4.4 21.31.1
Credits to Unkn0wn from Tudocelular
Click to expand...
Click to collapse
Hey, my phone is on 4.4.4 21.31.1 but it's EU and not Brazil version. I can installed this without any problem ?
? Why not, just waiting for the Official update ???!!
Smokey Mc Pot said:
Why not, just waiting for the Official update ???!!
Click to expand...
Click to collapse
because this is XDA!
cpvm said:
because this is XDA!
Click to expand...
Click to collapse
...and?!
Smokey Mc Pot said:
...and?!
Click to expand...
Click to collapse
Because most of us like to try new roms , kernels and we know the risk that we can brick our devices .
And has anyone tried any root methods on this?
Someone have a answer for me ? I want know if I can installed this rom on the Moto G 4.4.4 EU
same question !!!!!
!!!!!!!!!!
Valbon said:
Someone have a answer for me ? I want know if I can installed this rom on the Moto G 4.4.4 EU
Click to expand...
Click to collapse
oma89 said:
!!!!!!!!!!
Click to expand...
Click to collapse
No, You can´t.
For install this OTA you need the Brasil Stock Rom. I say it for experience, the instalation will be abort if you intall on another rom No Brasil retail
Ok thank you
Is it possible to install it on XT1033 (Brazilian 3G version)?
5.0.2 is pretty bad on mine.
htc desire
Only for Mexican users of Blur_Version.22.21.17.victara_retmx.retmx.en.MX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.co.nz/#!7VR0GR4Z!e3p2rphRaVSzFreoAAPsCmk-UIu3PJ5qH2l7dN4oDjM
My English isn't that good, MP o spanish
:highfive:
Thanks for share this OTA.
it's possible to use with a Claro (Chile) MotoX2014?
Hello,
I have an XT1097 directly from Motorola, (not telcel), but it's converted to XT1095
Is it possible to install this OTA to bring it back to it's real estate? (I don't have any backup of the original firmware)
xSober said:
Thanks for share this OTA.
it's possible to use with a Claro (Chile) MotoX2014?
Click to expand...
Click to collapse
No, it will fail. You have to wait for the OTA. But I doubt claro will get it, claro and motorola had a fight, and now claro does not sell motorola phones... which means claro's motorola phones might not get updates ever.
Sent from my XT1095 using Tapatalk
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
bunglemx said:
Hello,
I have an XT1097 directly from Motorola, (not telcel), but it's converted to XT1095
Is it possible to install this OTA to bring it back to it's real estate? (I don't have any backup of the original firmware)
Click to expand...
Click to collapse
No, flashing this OTA will not revert your phone back to stock 1097. You need to download the full firmware for 1097 and flash it to get back to stock.
Sent from my XT1095 using Tapatalk
I don't think this is the official release because the kernel is one month older than the other "official" OTA's. Looks more like the soak before the final release.
No, flashing this OTA will not revert your phone back to stock 1097. You need to download the full firmware for 1097 and flash it to get back to stock.
Click to expand...
Click to collapse
Do you know where can I get it?
And do I flash it just like the xt1095 one of your guide?
:good:
bunglemx said:
Do you know where can I get it?
And do I flash it just like the xt1095 one of your guide?
:good:
Click to expand...
Click to collapse
I don't know which 1097(countrt/carrier) you have, so that depends. This link has many firmwares for the moto x: http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
AGISCI said:
I don't know which 1097(countrt/carrier) you have, so that depends. This link has many firmwares for the moto x: http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
México, and I bought it directly to Motorola, so no carrier.
Does it work for 22.21.25.victara_retla.retla.en.01?
Thanks!
bunglemx said:
México, and I bought it directly to Motorola, so no carrier.
Click to expand...
Click to collapse
Yes, the firmware for mexico is in that link. Here it is:
[http://www.filefactory.com/file/66bsfufslbt1/RETMX_XT1097_5.0_LXE22.46-17_cid12_CFC.xml.zip
The instructions should be similar to what is posted in other topics. But if you want to be on the safe side use RSDLite to flash it.
Sent from my XT1095 using Tapatalk
AGISCI said:
Yes, the firmware for mexico is in that link. Here it is:
[http://www.filefactory.com/file/66bsfufslbt1/RETMX_XT1097_5.0_LXE22.46-17_cid12_CFC.xml.zip
The instructions should be similar to what is posted in other topics. But if you want to be on the safe side use RSDLite to flash it.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Thanks, i'll download for a future flash :good:
I got the same update yesterday but It doesn't let me update it says there is an error when trying to update.
I tried from stock recovery and it says there is an error with gmail2.apk anyone know why is this happening?
A similar error happened to me yesterday, but with "Books.apk". I flashed again the stock rom with RDSLite and then I flashed the OTA (the zip file from the 1st post) and everything is working great now.
Can I use it? 4.4.4 telcel.
ccarrionc said:
Can I use it? 4.4.4 telcel.
Click to expand...
Click to collapse
No, you have to be on 5.0 retail mexico to use this ota file.
Sent from my XT1095 using Tapatalk
how i can chage the andorid 5.0 to 5.1?
Hi friends , i´m from mexico, i have a motox xt1097 with the carrier telcel, a few moths ago i can change the kit kat 4.4.4 to android 5.0 with the rds motorola and the system upgrade to 22.21.17.victara_retmx.retmx.en.MX amxmx, i want the 5.1 to my moto x, can you help me?
Thanks.
alexloyola said:
Hi friends , i´m from mexico, i have a motox xt1097 with the carrier telcel, a few moths ago i can change the kit kat 4.4.4 to android 5.0 with the rds motorola and the system upgrade to 22.21.17.victara_retmx.retmx.en.MX amxmx, i want the 5.1 to my moto x, can you help me?
Thanks.
Click to expand...
Click to collapse
If you're already on the stock 5.0 firmware (22.21.17.victara_retmx.retmx.en.MX), then you just need to flash the OTA via recovery.
If you don't know how to enter the recovery, just search for instructions, they're pretty easy to find, even videos.
Nek0x90 said:
A similar error happened to me yesterday, but with "Books.apk". I flashed again the stock rom with RDSLite and then I flashed the OTA (the zip file from the 1st post) and everything is working great now.
Click to expand...
Click to collapse
Can you link me to the post with that RDSLite or help me with some instructions to do it please?
work on amxmx telcel
zarocks said:
work on amxmx telcel
Click to expand...
Click to collapse
As I said, this is not the final/stable version. Look the date of the kernel, is 2 months old and the "official" versions out there are not more than one month old. Good it worked for you
What is this?
First of all, hi everyone
I decided to try my best to archive all the possible OTA updates (paths) that a Moto G5 (cedric) users can take.
With the various risks of clean / factory flashes in mind, I thought that some users might prefer using ZIPs to update their device instead. These can prove to be especially useful if your Moto is on a Software Channel that gets very little updates, or if you have no SIM card inserted as that often breaks updating capabilities.
As of now 29 unique OTA files are in the archive, starting from the earliest software version I could find online. The ZIPs are hosted on Google Drive, if you know of a better location then feel free to drop a suggestion. Along with that, any type of feedback for this archival project is welcome. If you or any of your friends own a Moto that is not necessarily a G5 and are stuck on an older firmware, I'll try to do my best to find an upgrade path that would work. Thank you for your attention and I hope you appreciate this.
Where do I get the OTA files?
retail Moto G5: https://drive.google.com/drive/folders/1BkpfHvgQ477NViLYvzgv88Fgq3SSt5Py?usp=sharing
amzin Moto G5: https://drive.google.com/drive/folders/1Lj8uwBI4tR4v5I_hl74SVW21Fmg0qc0E?usp=sharing
What do the ZIP file names mean?
Along with the ZIPs, there's a file called "BlurBuildList.txt" in the Google Drive folder which shows you the relation between Blur_Version and regular Build Numbers.
Let's say your phone currently runs NPPS25.137-93-2-3 and you want to update to NPPS25.137-93-2-5
In the TXT file, you can see that
NPPS25.137-93-2-3 corresponds to Blur_Version.25.331.5.cedric.retail.en.US
NPPS25.137-93-2-5 corresponds to Blur_Version.25.361.10.cedric.retail.en.US
In this case, you'll want the file called block_delta-ota-Blur_Version.25.331.5-25.361.10.cedric.retail.en.US.zip
Sometimes you'll need to use multiple files to get the desired version, for example if you are on Blur_Version.25.311.3.cedric.retail.en.US you would need to use 2 files to update to Blur_Version.25.361.10.cedric.retail.en.US.
Why? Because block_delta-ota-Blur_Version.25.311.3-25.361.10.cedric.retail.en.US.zip doesn't exist but these two do:
block_delta-ota-Blur_Version.25.311.3-25.331.5.cedric.retail.en.US.zip
block_delta-ota-Blur_Version.25.331.5-25.361.10.cedric.retail.en.US.zip
How do I install these?
Method 1 - ADB Sideload
Boot your phone to recovery mode
Connect your phone to your PC
Select "Apply update from ADB"
On your PC run
Code:
adb sideload <path to ZIP file>
Method 2 - SD card
Put the ZIP on your phone's SD card while it is in Android
Boot your phone to recovery mode
Select "Apply update from SD card"
Navigate to where you put the ZIP and select it
If you found this thread useful and/or helpful, a Thanks is much appreciated :highfive:
Thank you very much!
moto g4 play ?
takoa said:
moto g4 play ?
Click to expand...
Click to collapse
No this is for the Moto g5... That's why it's in the Moto g5 thread!
takoa said:
moto g4 play ?
Click to expand...
Click to collapse
I can help out with finding a Moto G4 Play upgrade path if needed but please don't count with a big archive like the G5 one, my bandwidth isn't the best
great i'm on NPPS25.137-93-2 (25.311.3) tanks to you, but, can you add the file NPPS25.137-93-2-3 i think is updated patch to May 2018, thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
May OTA now available ?
tfwboredom said:
May OTA now available
Click to expand...
Click to collapse
great, i updated it and now i'm on May 2018 Security Patch, thanks!
Is it used to update any particular model? I have a xt1670 a SIM and xt1671 dual SIM. There is no problem my friend.
I used it on my XT1671 DS channel: tigco
yilhernandez said:
Is it used to update any particular model? I have a xt1670 a SIM and xt1671 dual SIM. There is no problem my friend.
Click to expand...
Click to collapse
Enviado desde mi Moto G (5) mediante Tapatalk
yilhernandez said:
Is it used to update any particular model? I have a xt1670 a SIM and xt1671 dual SIM. There is no problem my friend.
Click to expand...
Click to collapse
As far as I'm aware these aren't XT specific, anyone with a Cedric should be able to use them
May2018 patch another version?
Enviado desde mi Moto G (5) mediante Tapatalk
Caith said:
May2018 patch another version?View attachment 4519345
Enviado desde mi Moto G (5) mediante Tapatalk
Click to expand...
Click to collapse
Thank you for the tip I've uploaded the ZIP and updated the TXT as usual. This particular version is 25.321.18 (NPPS25.137-93-12) which is older than the previously found 25.331.5 (NPPS25.137-93-2-3) though, at least that's how it appears in terms of build numbers.
If there's interest I can also upload OTAs for the amzin variant too
I could not install any or I have the original clipping of my compilation which is NPP25.137.82 si alguien me pudiera ayudar gracia
faeajefexx said:
I could not install any or I have the original clipping of my compilation which is NPP25.137.82 si alguien me pudiera ayudar gracia
Click to expand...
Click to collapse
https://www.laneros.com/temas/lenovo-moto-g5-y-moto-g5-plus.230974/page-10#post-6436373
How can I install these updates (Twrp or stock recovery)???
You need to use stock recovery, the TXT in the Drive folder should help you pair the Blur versions in the filenames to the Build versions you see in your phone's About page in Settings
Can you please upload the OTAs for the amzin variant too?
Thank you in advanced. ??
Hi, do you know if you can publish the soak test for the Moto G5 cedric, looks that in brazil is available the oreo version
achintyakv said:
Can you please upload the OTAs for the amzin variant too?
Thank you in advanced.
Click to expand...
Click to collapse
I’ll add them to the OP later today
Caith said:
Hi, do you know if you can publish the soak test for the Moto G5 cedric, looks that in brazil is available the oreo version
Click to expand...
Click to collapse
If you could give me a serial number from a G5 that got a soak test then I’d gladly upload the ZIP