Database Users

Need your help - Locked phone

Hello, I'm new here.
I have a problem.
I forgot the PIN lock of my SM-G360F LTE (with Android 4.4.4), and I would like to keep all my files & documents inside it.
I don't have USB Debug enabled and I don't have a Samsung Account, so there's no easy way I can connect the phone to a computer.
What can I do to save my datas?
I've already tried flashing a Custom Recovery with Odin, but I haven't found a compatible one.
Please, give me an advice on what I should do.

Not sure if this will work for your version but it can't hurt to try. It worked for my stock unrooted SM-G360T1
http://forum.xda-developers.com/gal...emoving-frp-protection-samsung-t3275584/page4
Let me know if this works for you

hatchet13rydin69 said:
Not sure if this will work for your version but it can't hurt to try. It worked for my stock unrooted SM-G360T1
http://forum.xda-developers.com/gal...emoving-frp-protection-samsung-t3275584/page4
Let me know if this works for you
Click to expand...
Click to collapse
It doesn't work (or I'm missing something) just because I can't unlock my screen lock to install the APK.
If I'm missing something, please tell me.
What I'm looking for is a way to enable USB Debug mode without unlocking the screen (something like a Custom Recovery mode).

Read the entire post including he comments cuz that link I posted is a step by step guide to unlocking the phone. If the phone has not been factory reset yet then do that first so it causes the phone to go to the Google email verification page then follow the in the link step by step and you will have the phone unlocked. What you are doing with this guide is making a custom path to the settings menu for the phone enabling you to do a factory reset from the backup/reset setting. By doing so you will remove the link to any and all accounts that have been uses on the phone this making the device start just as it would had you bought it from the store and was doing the initial setup. Let me know if you get stick anywhere or need help

hatchet13rydin69 said:
Read the entire post including he comments cuz that link I posted is a step by step guide to unlocking the phone. If the phone has not been factory reset yet then do that first so it causes the phone to go to the Google email verification page then follow the in the link step by step and you will have the phone unlocked. What you are doing with this guide is making a custom path to the settings menu for the phone enabling you to do a factory reset from the backup/reset setting. By doing so you will remove the link to any and all accounts that have been uses on the phone this making the device start just as it would had you bought it from the store and was doing the initial setup. Let me know if you get stick anywhere or need help
Click to expand...
Click to collapse
But if I factory reset my phone, I will lose all my data, which I don't want to. Or via this "Backup/Reset" setting am I keeping my data?
Sorry for all this questions, but I'm pretty confused...

You will lose your data as this is the master factory reset but you can back up everything while in this menu to your Google account. After you factory reset go through the initial setup and come back to this menu and restore from your Google account

Can I backup my photos, music, documents etc. on my Google account? And how do I do it before resetting the phone?

sfn1701 said:
Can I backup my photos, music, documents etc. on my Google account? And how do I do it before resetting the phone?
Click to expand...
Click to collapse
Check out this guide here on lifehacker...
https://lifehacker.com/5976036/simp...droid-phone-from-the-desktop-no-root-required
Works great and doesn't require root to get it done. I know it is a lil different from what I mentioned earlier but I totally spaced this method until earlier today. Hope this helps you.

Man, my main problem is I can't enable USB debugging, having the screen locked! So I can't use any ADB method.

As far as I know there is no other way to backup your data without using adb methods without a custom recovery. Have you tried flashing twrp for your device and doing a full nandroid that way? I know that twrp has a compatible version for your device. Just search the forums here for you specific device model and flash using Odin 3.10
Here is the link to the twrp website go here to make sure you model is supported then download the tar.md5 file for tour device and flash using odin. Make sure to Uninstaller lies from your pc to avoid any issues with odin
http://twrp.me/

I had already tried flashing twrp, but when I tried to boot in recovery I did get a Bootloop and the "Recovery is not seandroid enforced" error.

sfn1701 said:
I had already tried flashing twrp, but when I tried to boot in recovery I did get a Bootloop and the "Recovery is not seandroid enforced" error.
Click to expand...
Click to collapse
Are you using the hardware keys to boot to recovery (volume up+home+Power buttons)? If you try to boot to recovery from any other method it will cause a recovery loop. It's a known issue with all variants of this divice. It's gonna show the "Recovery is not seandroid enforcing" but it will go into recovery.

Of course, I'm using Home+VolUp+Power.

Im out of ideas outside of trying to flash twrp again through Odin

sfn1701 said:
I forgot the PIN lock of my SM-G360F LTE (with Android 4.4.4), and I would like to keep all my files & documents inside it.
Click to expand...
Click to collapse
You can just try reflashing the stock firmware for your region in the AP slot of Odin from here.
http://sammobile.com/firmwares/database/SM-G360F/
It should keep all your data while it resets everything else like new.

bogarty said:
You can just try reflashing the stock firmware for your region in the AP slot of Odin from here.
http://sammobile.com/firmwares/database/SM-G360F/
It should keep all your data while it resets everything else like new.
Click to expand...
Click to collapse
But will flashing stock firmware remove the frp lock? Sorry still a lil new to all this and just trying to gain knowledge of everything I can.

hatchet13rydin69 said:
But will flashing stock firmware remove the frp lock? Sorry still a lil new to all this and just trying to gain knowledge of everything I can.
Click to expand...
Click to collapse
Yes. In fact, if you've tripped factory reset protection (FRP), it is the only way to fix it. Here's an example of where this worked for someone else. Read my comment here:
http://forum.xda-developers.com/showthread.php?p=65016084
Then also read the response that follows. Use the correct firmware for your device though at the link i gave above.

bogarty said:
Yes. In fact, if you've tripped factory reset protection (FRP), it is the only way to fix it. Here's an example of where this worked for someone else. Read my comment here:
http://forum.xda-developers.com/showthread.php?p=65016084
Then also read the response that follows. Use the correct firmware for your device though at the link i gave above.
Click to expand...
Click to collapse
I followed this guide here earlier his year and it worked without any problems
http://forum.xda-developers.com/gal...emoving-frp-protection-samsung-t3275584/page1
I'm still using the device that I used this guide for. Have recently rooted and installed twrp. Going to flash slimpickens rom later tonight

hatchet13rydin69 said:
I followed this guide here earlier his year and it worked without any problems
http://forum.xda-developers.com/gal...emoving-frp-protection-samsung-t3275584/page1
Click to expand...
Click to collapse
I understand that that guide has helped people and that's a good thing for sure. It's just that it's really the absolute most difficult way to fix a device that's under an FRP lock, as it's many steps rather than just the one step of flashing the stock firmware.

bogarty said:
I understand that that guide has helped people and that's a good thing for sure. It's just that it's really the absolute most difficult way to fix a device that's under an FRP lock, as it's many steps rather than just the one step of flashing the stock firmware.
Click to expand...
Click to collapse
I appreciate the help and insight. Will definitely keep this in mind in case I ever run into this problem again.

J500FN rapidly running out of space

As a bog standard user I naively assumed that I could put apps on my SD card as and when I wanted. Instead the majority refuse to be put there or cause problems.
If I root my Samsung J500fn (Marshmallow) will I be able to chose the location for putting apps? Can I get rid totally of the stuff Google/Samsung think I need but I never use? Can I make better use of my SD card that is practically empty? Are there any drawbacks to keeping Marshmallow as installed or would rooting overwrite it? Is there a better way than to root? Is "One Click root" safe to use? Am I better of using various programs like Odin, TWRP etc. mentioned in various threads here?
Thanks to any and all who can answer my questions. :fingers-crossed:
Anne

webelan said:
As a bog standard user I naively assumed that I could put apps on my SD card as and when I wanted. Instead the majority refuse to be put there or cause problems.
If I root my Samsung J500fn (Marshmallow) will I be able to chose the location for putting apps? Can I get rid totally of the stuff Google/Samsung think I need but I never use? Can I make better use of my SD card that is practically empty? Are there any drawbacks to keeping Marshmallow as installed or would rooting overwrite it? Is there a better way than to root? Is "One Click root" safe to use? Am I better of using various programs like Odin, TWRP etc. mentioned in various threads here?
Thanks to any and all who can answer my questions. :fingers-crossed:
Anne
Click to expand...
Click to collapse
Hi Anne,
We all have the same trouble with storage on our J5.
If you chose to root your phone then yes you will be able to uninstall alot of the bloat ware that is on your phone.
You will also have the option of using adaptable storage.
There are lots of threads on here that will guide you through the process. Just make sure that you read the guides properly and download and install the CORRECT zips.
I don't know if the one click root is safe to use.
I would advice installing TWRP and then flashing super su. Again all of the guides are on here.
If you do install TWRP via Odin then you will have the option of flashing custom ROMs..
Have a good look at the guides. Ask all the questions that you need to. People in here will be happy to help.
It's really nice to see you on here
Have fun
John

Don't need root for adoptable storage.

Hi
Did u get the info that you need ?

Rooting
johnhux7 said:
Hi
Did u get the info that you need ?
Click to expand...
Click to collapse
Hi again, thanks for asking.
I downloaded TWRP from https://www.androidfilehost.com/?w=files&flid=55922, version for SM-J500FN dated May 6, 2016. Also ODIN-v3.10.7 and SU SR4-SuperSU-v2.78-SR4-20161115184928 as well as the Samsung USB drivers. All check sums were fine. Odin 3 installed fine on my PC. I used Odin 3 to install the TWRP on my phone. However, when I try to go into Volume up - home - power on - I get a screen that does not resemble at all what I thought TWRP should look like.
I get the yellow/green Android thingy which says "installing system update" follows by "no command" followed by a screen which says:
Android Recovery
MMB29M.J500FNXXU1BPH1
samsung/j5nltexx/j5nlte
6.0.1/MMB29M/J500FNXXU1BPH1
user/release-keys
Use volume up/down and power. (all in yellow)
Followed by a menu which includes "apply update from SD card" but which doesn't install the SU zip file that I put in the download section of the SD card.
--------
So I am a bit lost and bewildered. Is the menu correct for TWRP? I haven't seen anything on the web or in YouTube that looks at all like what I'm getting. Did TWRP install properly - Odin 3 seemed to think so, but I'm beginning to wonder.
Any help, comment appreciated.
Anne

webelan said:
Hi again, thanks for asking.
I downloaded TWRP from https://www.androidfilehost.com/?w=files&flid=55922, version for SM-J500FN dated May 6, 2016. Also ODIN-v3.10.7 and SU SR4-SuperSU-v2.78-SR4-20161115184928 as well as the Samsung USB drivers. All check sums were fine. Odin 3 installed fine on my PC. I used Odin 3 to install the TWRP on my phone. However, when I try to go into Volume up - home - power on - I get a screen that does not resemble at all what I thought TWRP should look like.
I get the yellow/green Android thingy which says "installing system update" follows by "no command" followed by a screen which says:
Android Recovery
MMB29M.J500FNXXU1BPH1
samsung/j5nltexx/j5nlte
6.0.1/MMB29M/J500FNXXU1BPH1
user/release-keys
Use volume up/down and power. (all in yellow)
Followed by a menu which includes "apply update from SD card" but which doesn't install the SU zip file that I put in the download section of the SD card.
--------
So I am a bit lost and bewildered. Is the menu correct for TWRP? I haven't seen anything on the web or in YouTube that looks at all like what I'm getting. Did TWRP install properly - Odin 3 seemed to think so, but I'm beginning to wonder.
Any help, comment appreciated.
Anne
Click to expand...
Click to collapse
If your phone is looking like that then you have the wrong version of TWRP for the version of android that your using.
I did the same thing.
I hadn't got the time at the mo to find you the correct version but that is the problem for sure.
You want the one by Garnesh Varma which if on the Roms & kernels thread
John

johnhux7 said:
If your phone is looking like that then you have the wrong version of TWRP for the version of android that your using.
I did the same thing.
I hadn't got the time at the mo to find you the correct version but that is the problem for sure.
You want the one by Garnesh Varma which if on the Roms & kernels thread
John
Click to expand...
Click to collapse
Hi john,
Following your suggestion I downloaded the TWRP version http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 by searching for Garnesh Varma. It successfully installed, but the problem remains the same. I do not get the TWRP recovery page just the same as before.
I shall continue to look to see if I can find another version from Garnesh, although it seemed correct ie SM-J500FN Android version 6.0.1 Build number MMB29M.J500FNXXU1BPH1, security patch level 1 August 2016.
Will let you know how I get on.
Thanks again,
Anne

webelan said:
Hi john,
Following your suggestion I downloaded the TWRP version http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 by searching for Garnesh Varma. It successfully installed, but the problem remains the same. I do not get the TWRP recovery page just the same as before.
I shall continue to look to see if I can find another version from Garnesh, although it seemed correct ie SM-J500FN Android version 6.0.1 Build number MMB29M.J500FNXXU1BPH1, security patch level 1 August 2016.
Will let you know how I get on.
Thanks again,
Anne
Click to expand...
Click to collapse
Ahah! The trick was to turn off the phone and not to permit ODIN to do a reboot. I didn't know how to turn off so I pulled the battery. Then went into volume up - home - power on and got the correct menu. Whew. Rooted now according to root checker. Now to get some of the stuff off the phone and make some space.#
Thanks for your help,
Anne

webelan said:
Ahah! The trick was to turn off the phone and not to permit ODIN to do a reboot. I didn't know how to turn off so I pulled the battery. Then went into volume up - home - power on and got the correct menu. Whew. Rooted now according to root checker. Now to get some of the stuff off the phone and make some space.#
Thanks for your help,
Anne
Click to expand...
Click to collapse
Nice one. I'm pleased that you got it sorted !
Next you will be on the custom roms ! If you need any help just shout !
John

@webelan
Hello Anne!
Once you are rooted you can remove any Google/Samsung app. But removing some system apps can lead to bootloop. You can recover from bootloop by re-flashing stock rom.
I can make a flashable zip which removes unnecessary system apps, including the Google/Samsung apps which you want (you flash the zip in recovery and you're done). So let me know which Google/Samsung apps you wanna remove.
You can find some more basic informations in our Q&A thread: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
I recommend you to try cm 12.1 (5.1.1 lollipop) by Nick Verse if you don't care about Samsung Camera, Memo and Browser. I use Open Camera, Color Note and Dolphin Browser (has sound/brightness sliders in videos) as alternatives. Unlike Touchwiz, CM 12.1 is faster than Touchwiz and has more free ram. But latest release has a bug (random reboot reported by users) which can be fixed manually. I'm running latest release without any problem.
Have a nice day!
Robert.
PS: You have a nice name

more woe
johnhux7 said:
Nice one. I'm pleased that you got it sorted !
Next you will be on the custom roms ! If you need any help just shout !
John
Click to expand...
Click to collapse
Don't know if I should start another thread but...
I used Aps2SD to create a second partition on my phone after making a backup of the SD card using that program. Restored the SD card and then I linked various apps to the new partition. When everything was done, and working, I used the option "Broken ap cleaner" just in case there were any residue files with "select all"
My error may have been to do a hard shutdown afterwards because now I get "Android System There's an internal problem with your device, and it may be unstable until you factory data reset." Then several aps, including a Google app, Photos, CM security and Gmail stop, in fact all those that run automatically at startup. Gmail and Google are on the internal drive now but were previously linked; CM is on the external partition still. The first thing after that I noticed after the hard shut down was that the icons for linked aps had disappeared and the aps keep stopping if I try to run them.
I read the Aps2SD FAQ and followed the two suggestions regard SU, ie "enable su at boot" and disabled "namespace separation" option.
Any suggestions? Should I
(a) do a "factory data reset"
(b) wipe the SD card and partition and completely reinstall the aps I want? Although if Google app is not working don't know if it can be reinstalled as I'm not sure which oneis meant.
(c) Bite the bullet and install a custom rom?
(d) something else?
Any help as usual very much appreciated,
Anne

webelan said:
Don't know if I should start another thread but...
I used Aps2SD to create a second partition on my phone after making a backup of the SD card using that program. Restored the SD card and then I linked various apps to the new partition. When everything was done, and working, I used the option "Broken ap cleaner" just in case there were any residue files with "select all"
My error may have been to do a hard shutdown afterwards because now I get "Android System There's an internal problem with your device, and it may be unstable until you factory data reset." Then several aps, including a Google app, Photos, CM security and Gmail stop, in fact all those that run automatically at startup. Gmail and Google are on the internal drive now but were previously linked; CM is on the external partition still. The first thing after that I noticed after the hard shut down was that the icons for linked aps had disappeared and the aps keep stopping if I try to run them.
I read the Aps2SD FAQ and followed the two suggestions regard SU, ie "enable su at boot" and disabled "namespace separation" option.
Any suggestions? Should I
(a) do a "factory data reset"
(b) wipe the SD card and partition and completely reinstall the aps I want? Although if Google app is not working don't know if it can be reinstalled as I'm not sure which oneis meant.
(c) Bite the bullet and install a custom rom?
(d) something else?
Any help as usual very much appreciated,
Anne
Click to expand...
Click to collapse
It sounds like the app has been corrupted, don't really know how to best advice you.
It sounds like you have to do s factory reset.
I would install a custom ROM.
The only trouble with this is that all the roms have just been shut down so you will have trouble downloading any.
Why model do you have ?
If you want to use a custom ROM pm me and I will send you a link.
The custom roms are much better (in my opinion )
John
Sent from my j5nltexx using XDA Labs

#Henkate said:
@webelan
Hello Anne!
Once you are rooted you can remove any Google/Samsung app. But removing some system apps can lead to bootloop. You can recover from bootloop by re-flashing stock rom.
I can make a flashable zip which removes unnecessary system apps, including the Google/Samsung apps which you want (you flash the zip in recovery and you're done). So let me know which Google/Samsung apps you wanna remove.
You can find some more basic informations in our Q&A thread: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
I recommend you to try cm 12.1 (5.1.1 lollipop) by Nick Verse if you don't care about Samsung Camera, Memo and Browser. I use Open Camera, Color Note and Dolphin Browser (has sound/brightness sliders in videos) as alternatives. Unlike Touchwiz, CM 12.1 is faster than Touchwiz and has more free ram. But latest release has a bug (random reboot reported by users) which can be fixed manually. I'm running latest release without any problem.
Have a nice day!
Robert.
PS: You have a nice name
Click to expand...
Click to collapse
Hi Robert,
Thanks for the offer. So far I have not deleted anything but have used software to partition my SD card and to move stuff out of internal memory onto it - or rather link it. I managed to mess up a bit but seem to have recovered - or at least got a phone with items I want to use. Next week when I've more time I'm hoping to install a Custom ROM. In the meantime I've spent what little time available trying to read as much as I can so that when I do put a Custom ROM on, it goes right first time.
Best wishes,
Anne

webelan said:
Hi Robert,
Thanks for the offer. So far I have not deleted anything but have used software to partition my SD card and to move stuff out of internal memory onto it - or rather link it. I managed to mess up a bit but seem to have recovered - or at least got a phone with items I want to use. Next week when I've more time I'm hoping to install a Custom ROM. In the meantime I've spent what little time available trying to read as much as I can so that when I do put a Custom ROM on, it goes right first time.
Best wishes,
Anne
Click to expand...
Click to collapse
Hi Anne!
Note that once you flash TWRP, Knox will become 0x1 (initially is 0x0) which means that you void the warranty. In my opinion, I don't care about the warranty because I prefer to have a better experience with my phone. I cannot live without root after I rooted a phone for first time
Regarding the ROM, if you wanna try cm12.1 (which I recommend it, best ROM which is closest to AOSP and never lagged) I'll recommend you to wait some more time because I'll download CM 12.1 sources and build a new update with the help of Nick Verse . He doesn't have enough space on his PC to have both cm12 & cm13 sources. I'm currently trying to extend my Linux partition to have enough space to build though. Is needed about 80gb in total average and I have about 20 and can't resize my partition. I might try to reinstall Linux.
If you have any other question, feel free to ask here (new thread if it's related to something else) or PM me.
Have a nice day!
Robert.

Having a similar issue, i have got my phone so it boots to TWRP 3.1.1-0 but cannot find a ROM file that will install, they all seem to be for j5nlte, even if the file name states j5nltexx. I have tried to ammend/remove the assert lines in the install package to no avail...
any advice would be good
Thanks in advance
PB

ashyx said:
Don't need root for adoptable storage.
Click to expand...
Click to collapse
Then what to do

#Henkate said:
Hi Anne!
Note that once you flash TWRP, Knox will become 0x1 (initially is 0x0) which means that you void the warranty. In my opinion, I don't care about the warranty because I prefer to have a better experience with my phone. I cannot live without root after I rooted a phone for first time
Regarding the ROM, if you wanna try cm12.1 (which I recommend it, best ROM which is closest to AOSP and never lagged) I'll recommend you to wait some more time because I'll download CM 12.1 sources and build a new update with the help of Nick Verse . He doesn't have enough space on his PC to have both cm12 & cm13 sources. I'm currently trying to extend my Linux partition to have enough space to build though. Is needed about 80gb in total average and I have about 20 and can't resize my partition. I might try to reinstall Linux.
If you have any other question, feel free to ask here (new thread if it's related to something else) or PM me.
Have a nice day!
Robert.
Click to expand...
Click to collapse
Please work on camera that is the only thing cm 12.1 lackss thank youu

S7 edge (Canada) WILL NOT boot to twrp

HI all!! Glad to be here! Thank you in advance for the opportunity to receive much needed help.
ADMIN : Please put this in the proper topic forum if needed. Thank you!
Samsung Galaxy S7 SW-G935W8
I've never rooted an android and want to to customize the gui (to something really hi res and sharp looking and cool like 3D lazer razors!:cyclops: ) and remove bloatware.
I've done a bit of research prior too, just to familiarize myself with rooting and what's involved. Today, I found myself with an extra hour worth of time and figured, "meh, cant take that long!" Wow was I wrong! I have been working at this for 4 hours already.
I started by watching a tutorial AND reading thru the tutorial and DLing all necessary files to my computer that the tutorial said to. It was twrp ver 3.0.2-4 and ODIN, SU, and the samsung drivers. I quickly read through some troubleshooting posts here in case I got into some trouble I'd know what I'm dealing with.
step one(I'm doing this from memory)
copy SU onto phone (i put in in root directory and onto the sim *just in case)(had to look up where the "root" folder was located:silly: )
Step 2: turn off phone.
Step 3: turn phone on into Download mode
Step 4: press volume up to enter download mode
Step 5: open odin on pc
Step 6: put twrp*.*.*.*.img in the space for AP
Step 7: UNCHECK auto reboot
Step 8: hit start in ODIN
Step 9: PASS!!! right?!?!? WRONG!!!
SO THIS IS WHERE I MANUALLY REBOOT (oops caps) (vol dn+home button + power button) as soon as screen turns off (from DL screen) press and hold vol up whilst holding home + power.
Sometimes it just boots normally, sometimes it boots to a red screen, I have tried several different versions of the twrp and ODIN without success.
At this point I give up unless you can help me. I'm just glad I haven't bricked my phone *|YET|*
I have also tried leaving autoreboot enabled in ODIN. and then quickly holding vol dn+vol up+ home + power(also just vol dn+home+power and then switching to vol up+home+power) without success.
Any suggestions? Again thank you in advance!!

So I ended up using chain fire to auto root it. I must've been using the wrong img file. So anyway I've rooted my phone now. I checked with a root checker.
This is the weird thing. I haven't lost any of my data on my phone. All my contacts, texts, and even chrome bookmarks are still there. Is this normal?
Also I was wondering if CM Launcher was any good? It has ads which I don't like and a bunch of crap ended up on my home screen and all the folders are now mixed up! I installed the "Next tech" theme which seems pretty good except for all the apps are disorganized.
I installed G DATA Internet Security as well. Again I've read a few reviews and it's saying it's not all that great. Anyone have any experience with G DATA?
I humbly ask for your insight and although you people are probably a lot younger than me, your expertise will go a long way to help me. If you have any tips to make my phone more enjoyable please pass them along!
Thank you!

Ok so now I have a new problem! I disabled developer options. Then restarted my phone. Don't ask me why! Now the OEM unlock is off too. So when I restarted I guess it says custom binary blocked by FAP lock"
What do i do now? please I have been messing around with this all day and am tired! I didn't get anything else done i was supposed to get done! I'm so fkn fat and lazy!

fat35yo said:
Ok so now I have a new problem! I disabled developer options. Then restarted my phone. Don't ask me why! Now the OEM unlock is off too. So when I restarted I guess it says custom binary blocked by FAP lock"
What do i do now? please I have been messing around with this all day and am tired! I didn't get anything else done i was supposed to get done! I'm so fkn fat and lazy!
Click to expand...
Click to collapse
Blocked by FRP lock...
You'll need to reflash stock firmware with Odin, go to SamMobile and you'll find what u need there.
---------- Post added at 07:03 AM ---------- Previous post was at 07:00 AM ----------
fat35yo said:
So I ended up using chain fire to auto root it. I must've been using the wrong img file. So anyway I've rooted my phone now. I checked with a root checker.
This is the weird thing. I haven't lost any of my data on my phone. All my contacts, texts, and even chrome bookmarks are still there. Is this normal?
Click to expand...
Click to collapse
Samsung devices when you root it you don't actually have to unlock the bootloader (Uh, maybe turning on OEM unlocking in Dev options...) So it doesn't wipe.

PalmCentro said:
You'll need to reflash stock firmware with Odin, go to SamMobile and you'll find what u need there.
Click to expand...
Click to collapse
Thank you so much for your fast and courteous reply!
There are 4 options i see for "Canada" "Rogers" G935W8
I clicked the newest one and its a 2gb download, does that seem right? is there THAT much bloatware?
Am I going to lose all my data now? Should I remove my sd card?
Thanks again!

There are 4 options i see for "Canada" "Rogers" G935W8
I clicked the newest one and its a 2gb download, does that seem right? is there THAT much bloatware?
Am I going to lose all my data now? Should I remove my sd card?
Thanks again!
Click to expand...
Click to collapse
ok so i guess they uploaded another Stock firmware lastnightn before getting an answer here so i Downloaded the newest on. I used ODIN (Thanks SAMMOBILE for making it easy to figure out which file goes where!)
I reset phone with ODIN and everyhting seems to work EXCEPT it won't let me sign in using my Gmail account. it keeps saying "please sign in using one of the owners accounts for this device'"
so now I stuck again!
It's stupid because it sends this phone prompts to verify thru SMS, It even let me reset my Gmail password through a sms verification through my phone. After a bit of reading though, I found out that you shouldn't reset your password for 72 hours or something! I dunno! I'm just skimming articles to try and fix this phone!

I tried signing into Google from my tablet. I verified that the s7 trying to access my account was in fact me. I then tried signing into the s7 to no avail. I'll keep posting my updated. Oh and administrator....I'm not just trying to get my 10 posts!

PalmCentro said:
Blocked by FRP lock...
.
Click to expand...
Click to collapse
Yea I realize that now...just thought it was a developer with a sick (but awesome) sense of humour??!!

Ok I'm pretty sure I found the info I needed here: https://productforums.google.com/fo...c;context-place=topicsearchin/gmail/icyseraph
I guess all it took was a little gugling

Micromax Canvas Knight A350 Phone totally dead...

Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.

Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way

harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.

raghubar said:
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.
Click to expand...
Click to collapse
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.

it worked...wow...thanks ...but now it gets into a boot loop
harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.

Mr.Ak said:
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.
Click to expand...
Click to collapse
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.

Frank Morris said:
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.
Click to expand...
Click to collapse
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
www.canvasknightroms.blogspot.in
Good luck!
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
raghubar said:
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.
Click to expand...
Click to collapse
Do you even know A350's battery is non-removable?
The only way you can remove it is by disassembling the device but doing that will compromise with your battery life.It should only be used in worst case scenario and everything else fails to work!

Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse

Frank Morris said:
Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse
What was the problem with v3?
Click to expand...
Click to collapse

Version 3 problem...
Mr.Ak said:
What was the problem with v3?
Click to expand...
Click to collapse
Version 3 booted well the first time...it went all the way...i was setting it up nicely...and it hung and just stopped. Ever since then I tried to reboot it would not load...the Canvas Knight logo with the sound would come on and then restart or get hung at that point. In short, it would not fully boot anymore except for that once!
So I decided to do away with version 3 and thought version 2 would be fine because that's what was originally on my phone...but now this is the problem...i mean the SPFT gets hung at 0%.
Thanks and God bless you.
On a different note, I would still love to have version 3 if possible since I plan to install a custom ROM...most likely Cyanogenmod....

Latest update...
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.

Frank Morris said:
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.
Click to expand...
Click to collapse
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697

Mr.Ak said:
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697
Click to expand...
Click to collapse
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.

Frank Morris said:
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.
Click to expand...
Click to collapse
How?

The Phone has been up and about for the last 6 hours now...
Mr.Ak said:
How?
Click to expand...
Click to collapse
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.

Frank Morris said:
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.
Click to expand...
Click to collapse
You don't need all those tool box.
Sp flash tools is enough to give life to your device.

Help required to set up the device fully...now that it is working!
Mr.Ak said:
You don't need all those tool box.
Sp flash tools is enough to give life to your device.
Click to expand...
Click to collapse
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.

Frank Morris said:
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.
Click to expand...
Click to collapse
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved

Thank you so much...
Mr.Ak said:
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved
Click to expand...
Click to collapse
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.

Frank Morris said:
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.
Click to expand...
Click to collapse
What about joining our whatsapp group?

Samsung S7 Edge is locked - Unlock or Data Extract help? Unique Situation...

Ok guys, new here and I've done a bit of reading on this already. From what I gather, the S7 Edge is difficult if not impossible to unlock without a factory reset. Here's the issue.
This phone belongs to my friend's husband who was severely injured in an accident at work. He's in a coma and probably won't survive. He was severely burned over 90% of his body with chemicals and he has no fingerprints to unlock the fingerprint scanner. In addition, his wife doesn't know his password, so I figured I'd see if I could do anything for her. I tried the Dr. Fone program, but it's apparently incompatible with the S7 Edge. He keeps getting texts and messages and we can't check them. The phone is also set for a daily alarm at 1:30 AM, and apparently you can't power it down without the lock code either. Ideally, I'd like to either gain access for her or at least extract what data we can from the thing before factory resetting it. It would also be nice to power it down so that it doesn't keep putting out an alarm every night in the middle of the night. All his contacts with his family are inconveniently stored in the phone as well. It's kind of a worst case scenario.
Any assistance or recommendations for a course of action for this situation would be fantastic. I don't have any other information on the device itself other than that it's running on Freedom Mobile's network in Ontario, Canada. They've said they can factory reset it for her, but we were trying to avoid that and get any contacts or messages from his phone if possible.
Thanks in advance for any help! I know it's a long shot!
Edit: I managed to power down the phone with the Power Button/Volume Down trick after about 9 tries, so at least the alarm won't go off. Other than that, no luck.

Unique situation? More like fked up situation.
Anyways I am assuming its a completely stock phone with USB debugging turned off. Hope its not carrier locked, if yes then here are the steps:
1. Flash Custom Recovery on the Phone using Odin
2. Use aroma file manager from the Recovery, you need to download it separately, put it on its SD card.
3. Now using aroma file manager navigate to Data Folder and then; System Folder and find “gesture.key” or “password.key” for pattern lock or password lock respectively.
4. Delete those any password related file and reboot. It should be unlocked now.

Thanks VERY much, UnNaMeD__!!!
I'm looking at Odin and the Recovery firmware right now. Is there a recommended version? I see TWRP and CWM, but primarily TWRP mentioned, and it looks like the .tar files are easy to find. I'm pretty new to this type of mod and I don't want to brick the phone, I know it's a risk. I'm looking at faqs on theandroidsoul and the cyanogenmods forum which seem quite thorough. Apparently I can't post the links as I'm a new user here....seems fair I suppose, especially considering the forum content.
My friend's husband didn't have a microSD card in (just checked), but I can toss a spare one of mine in for Aroma, which I found. I probably need for format it for FAT32, not NTFS though? Is there any way to tell if it's carrier locked? It's from a small phone company, not one of the bigger guys. I'm going to wait until I hear back to get started on this, as I'm decent with Windows based systems, but unfamiliar with the nuances of modding Android. I use a stock Sony XZ Premium myself.
Again, thanks very much! I've got some hope we can get in touch with his family now!
UnNaMeD__ said:
Unique situation? More like fked up situation.
Anyways I am assuming its a completely stock phone with USB debugging turned off. Hope its not carrier locked, if yes then here are the steps:
1. Flash Custom Recovery on the Phone using Odin
2. Use aroma file manager from the Recovery, you need to download it separately, put it on its SD card.
3. Now using aroma file manager navigate to Data Folder and then; System Folder and find “gesture.key” or “password.key” for pattern lock or password lock respectively.
4. Delete those any password related file and reboot. It should be unlocked now.
Click to expand...
Click to collapse

maxlords said:
Thanks VERY much, UnNaMeD__!!!
I'm looking at Odin and the Recovery firmware right now. Is there a recommended version? I see TWRP and CWM, but primarily TWRP mentioned, and it looks like the .tar files are easy to find. I'm pretty new to this type of mod and I don't want to brick the phone, I know it's a risk. I'm looking at faqs on theandroidsoul and the cyanogenmods forum which seem quite thorough. Apparently I can't post the links as I'm a new user here....seems fair I suppose, especially considering the forum content.
My friend's husband didn't have a microSD card in (just checked), but I can toss a spare one of mine in for Aroma, which I found. I probably need for format it for FAT32, not NTFS though? Is there any way to tell if it's carrier locked? It's from a small phone company, not one of the bigger guys. I'm going to wait until I hear back to get started on this, as I'm decent with Windows based systems, but unfamiliar with the nuances of modding Android. I use a stock Sony XZ Premium myself.
Again, thanks very much! I've got some hope we can get in touch with his family now!
Click to expand...
Click to collapse
Use odin 3.13 the latest
Then download twrp recovery 3.2.2.0 tar file for hero2lte the latest.
Boot your phone into odin mode by restarting your phone while holding power home button and vol down. When your reach the confirmation screen press OK.
Open odin and put the tar file in the ap slot and click the ap box and hit start to begin flashing.
Now restart ur phone by holding power home and vol down then immediately hold power home vol up to reach custom recovery.
Edit I just tested this myself
Flash the zip file from this thread no need to go looking for files in system.
https://forum.xda-developers.com/showthread.php?t=2780696
Should remove password pin or pattern.
To check if it's network locked just look at the back of your phone if it says 935u or Verizon wireless or 935W8 then the phone is unlocked for different networks.

maxlords said:
Thanks VERY much, UnNaMeD__!!!
I'm looking at Odin and the Recovery firmware right now. Is there a recommended version? I see TWRP and CWM, but primarily TWRP mentioned, and it looks like the .tar files are easy to find. I'm pretty new to this type of mod and I don't want to brick the phone, I know it's a risk. I'm looking at faqs on theandroidsoul and the cyanogenmods forum which seem quite thorough. Apparently I can't post the links as I'm a new user here....seems fair I suppose, especially considering the forum content.
My friend's husband didn't have a microSD card in (just checked), but I can toss a spare one of mine in for Aroma, which I found. I probably need for format it for FAT32, not NTFS though? Is there any way to tell if it's carrier locked? It's from a small phone company, not one of the bigger guys. I'm going to wait until I hear back to get started on this, as I'm decent with Windows based systems, but unfamiliar with the nuances of modding Android. I use a stock Sony XZ Premium myself.
Again, thanks very much! I've got some hope we can get in touch with his family now!
Click to expand...
Click to collapse
Just look at back of your phone and tell me its model, Like G935F. I will give you the correct recovery file. And recoveries have option to enable storage too so you can access data from computer. But to be honest it never worked for me. You could also give it a try before doing other steps.
You could contact on PM, or even better I could also help you over whatsapp if you wish.
And I never heard that you could brick phone by flashing recovery, maybe only if you flash incorrectly. A bad recovery will make recovery useless, but phone would still boot. Thats my experience.
I have broken password before of a Mediatek device. If you want I could try it on my own S7 Edge too to be 100% sure.

I'll send you a PM as well, but I just checked and it's a G935W8. Sorry for the delay, I work shift work and I'm pretty busy. I'm going to work on the phone on the weekend. I don't have Whatsapp currently, but I can get it. Thanks again for your kindly assistance!
UnNaMeD__ said:
Just look at back of your phone and tell me its model, Like G935F. I will give you the correct recovery file. And recoveries have option to enable storage too so you can access data from computer. But to be honest it never worked for me. You could also give it a try before doing other steps.
You could contact on PM, or even better I could also help you over whatsapp if you wish.
And I never heard that you could brick phone by flashing recovery, maybe only if you flash incorrectly. A bad recovery will make recovery useless, but phone would still boot. Thats my experience.
I have broken password before of a Mediatek device. If you want I could try it on my own S7 Edge too to be 100% sure.
Click to expand...
Click to collapse

maxlords said:
I'll send you a PM as well, but I just checked and it's a G935W8. Sorry for the delay, I work shift work and I'm pretty busy. I'm going to work on the phone on the weekend. I don't have Whatsapp currently, but I can get it. Thanks again for your kindly assistance!
Click to expand...
Click to collapse
Hey alright no problem.
Download TWRP for G935W8 from official TWRP website:
https://teamw.in/samsung/samsunggalaxys7edge.html
You can follow some instructions from this thread regarding flashing:
https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084
Flashing TWRP might cause your phone to not boot. You will need to download dm-verity disabler from the thread above.
So download TWRP, Aroma file manager, dm-verity bypass, and zip file to disable pass that the other user posted: https://forum.xda-developers.com/showthread.php?t=2780696
Download all these files and put aroma file manager, dm-verity bypass and that password zip file bypass on your SD.
Make sure auto reboot is disabled in odin, follow instruction in thread about how to install twrp. If the auto reboot is disabled, phone will just remain at the same screen, so after the flashing is done from odin. You need to force reboot on your phone (volume down + power button for few seconds), just when the screen goes off, you need to immediately press recovery button combination (vol up + home + power). Here once you enter TWRP recovery see if you can enable MTP and trasnfer data to PC, if not, goto install zip and try password bypass zip file. If it works file then ok and proceed to install dm-verity bypass file and reboot your phone. If that zip doesn't works. You need to go to same install zip file option and now install aroma file manager. From there delete the password files that I told you about earlier, flash dm-verity and reboot again.
Thats it, if get confused about a step, tell me.

Well, I attempted to install TWRP through the latest version of Odin, but it didn't work. The error message I got in Recovery/Download mode was:
"Custom Binary (RECOVERY) Blocked By FRP Lock."
I looked that up online and apparently to install TWRP, I need to remove the FRP lock. I found a program called RealTerm which can supposedly bypass the FRP lock, but it doesn't seem to be connecting to the locked phone and it's not exactly user friendly.
Am I missing something here? Or is there no way to bypass the FRP lock on the unit?