So my phone can't get past the alcatel boot logo. And the reason why is because i accedently formatted my internal storage.
I'm trying to get this fixed by using the upgrade tool from alcatel: http://www.alcatelonetouch.com/global-en/products/smartphones/one_touch_pop_c3.html#.VGiE_PmG-ao
But its says I already have the greatest software, can i just bypass this message somehow?
Usefull info:
-Phone is/was rooted
- no custom recovery
Related
I was trying earlier to install a custom recovery and after finally getting AutoRec to install TWRP decided to reboot into Android so I could fully backup my apps, data etc as I don't have enough storage space on the device to do it locally. Unfortunately I got stuck in a boot loop that showed me the LG logo then after a few seconds it displayed "security issue" underneath.
I ran through a few things I've found elsewhere and it was in the process of doing something via "firmware update" and got to 4% when the program crashed. I had no option other than to power off the phone but now I'm stuck in "Firmware Update" mode. I've not got a clue how to fix this and after searching I did find a guide but it involves telling my phone to use a different COM port in Device Manager but I don't have that option.
Right now I have my phone stuck like this and if nobody can help it's gone from being slow but usable to a brick. The fact that I can get the Firmware Update mode gives me slight hope. If anyone can help I'd really appreciate it. This is the first time I've not been able to fix an issue with an Android phone myself but this G2 has been a nightmare and the sluggish performance made me finally look for a custom ROM but rooting, installing custom ROMs .... it just doesn't want to do it and now this.
I managed to fix this after my brain woke up and found the required options in Device Manager. If anyone ever looks back for this issue I used the guide below.
http://forum.xda-developers.com/showthread.php?t=2432476
There are two guides there with a 2015 option using a different program and method. I used the 2015 method after the first one crashed during the flash process.
Hello all,
Recently My LG G2 broke for no reason . I was playing music and then it just stopped working. Then it stuck at booting loop logo.
Then I tried LGFlash tools 2014 with AU Vodafone D802T30a_00.kdz. It started firmware update but there was some error came in and asked me to remove battery and connect to micro USB again and retry.
But It did not work and stuck at the firmware upgrade screen.
Then I tried using SRKtools_2.1_droidth.zip, and tried to unbrick it. but I think it did not work properly. I remember my phone is not rooted.
Currently if I try to start my phone I see only LG logo and then it turns off.
If I try to connect it to the laptop, it opens lost of different drives and asks me to format but doesn't allow formatting due to write protection.
I tried to root the device using SRK tools but it is not recongnising device or asks me to select device in manual mode.
Can some one please help me in this situation. I want make my phone back in Life....
THank you
AMoL
I'm trying to unlock my HTC 10 Evo Sprint
In order to do so I have to root my phone
I managed to unlock my bootloader, but when going to recovery mode, my phone just goes back to the bootloader instead of the recovery settings
I can't do it without a physical SD card?
Somewhere I read I need to flash RUU, can I use everything meant for the HTC 10 on my HTC 10 Evo or is there something different?
I'm a complete newb.
I was using this method
https://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
And this
https://www.youtube.com/watch?v=btdllA1vlqI
Stuck in bootloader
Found TWRP for HTC 10 Evo Bolt
twrp-3.3.0-0-aca.img same ****
twrp-3.1.0-0-aca.img enables me to open Recovery mode
Succesfully rooted with SuperSu force encrypt default
Was having issues with DM mode, but managed it finally
NVreader shows "Failed.. Unable to open COM9 port".
What do I do?
Hello, Dear XDA-Developers.
I was trying some custom ROMs but when I installed Viper4Android and flashed it using Magisk the phone stucks on boot
However I have another problem, I found out that the internal storage of my phone got too small after upgrading into another version of Android, so I wanted to get back to Android 5 stock firmware completed to format the internal storage and not partitioning it as I thought so I tried to flash it in TWRP recovery but sadly after that I bricked the bootloader and the recovery. Next, I decided to flash a board image ALE-L02&L21&L23_MAA001077_Board_Software_general_05021SJN using IMAGE Download Software - IDTML01Ver1001, Still, the process got interrupted maybe because the phone was restarting itself and now I'm getting a screen that shows error after showing Huawei Ascend logo. Is there any chance to fix this dead phone but consider that my pc is no longer detecting the driver that I used to flash the board image, and I can't even turn off the phone now except if I let the battery dies.
Notice: I don't dare to use test points if there is no other choice how much it usually costs to fix it?
Hi all. So I have a frustrating issue with my phone after having updated to the last official firmware from the Asus website. I noticed that the phone operation was very slow, so I decided to do a factory reset from recovery. Everything went well until I am somehow locked out of my phone via FRP. The weirdest thing is that instead of asking for google credentials, it's asking for a pattern, which I am correctly inputting but it refuses to recognize it. So now I'm stuck with a locked out phone. Am I SOL at this point or is there a way to get past this other than taking it to a service center?
Things I've tried that haven't worked:
1. tried to erase user config in fastboot (returned error FAILED)
2. wiped all data in recovery
3. tried to flash to an older version via asus flashtool but didn't work as the device isn't recognized
Any help would be greatly appreciated.
xenoche said:
Hi all. So I have a frustrating issue with my phone after having updated to the last official firmware from the Asus website. I noticed that the phone operation was very slow, so I decided to do a factory reset from recovery. Everything went well until I am somehow locked out of my phone via FRP. The weirdest thing is that instead of asking for google credentials, it's asking for a pattern, which I am correctly inputting but it refuses to recognize it. So now I'm stuck with a locked out phone. Am I SOL at this point or is there a way to get past this other than taking it to a service center?
Things I've tried that haven't worked:
1. tried to erase user config in fastboot (returned error FAILED)
2. wiped all data in recovery
3. tried to flash to an older version via asus flashtool but didn't work as the device isn't recognized
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Ok i had the exact problem the latest patch for the device , i manually updated to oreo 8.1, has some bug that sometimes it doesnt recognise pin or pattern after some reboots it recognized it but it's not persistent as it stopped working.
I was able to fix it by flashing an older version with sp flashtool. You need to download and properly install SPFlashtool and everything it needs then you have to search for an spflashable rom that it's compatible with the one you have.