Database Users

[Q] Super Ultra Brick (WITH VIDEO)

UPDATE 3: I've got it back to as stock as I can get it. I think I'm going to just return it and get a new one. Thank you all for your help.
UPDATE 2: As of right now, I'd like to completely remove FFF from the device, but I can only use fastboot to do it. I have absolutely no adb access. Is there a way?
UPDATE: Here is a video showing what is happening to my KF: http://www.youtube.com/watch?v=MH6oUg1NmC0
I hate to start another thread about boot loops/bricking, but I'm not sure what's going on with my fire.
I had CM7 installed successfully since the day after Christmas. This morning I woke up and my Fire was being really sluggish, so I rebooted it (I did not select reboot into recovery).
After it powered on, I was stuck at the CM7 boot screen (with the skateboarding android). I let it sit, but no luck. I went into TWRP to try and restore the backup I made of the stock rom. It looked successful, but when I rebooted I was stuck at the Kindle Fire boot screen.
Next, I tried wiping the device and re-installing CM7, but I received an error (something along the lines of E:Error unable to find /tmp/sideload/blahblah).
So I again restored my backup of the stock rom. Now when I power on my Fire I see the yellow triangle, then the kindle fire logo, yellow triangle, kindle fire logo, and it just keeps repeating. The problem is I am unable to connect to adb because the PC only seems to recognize the adb device for a few seconds after the yellow triangle, which does not give me enough time to fix the problem.
Any ideas?

looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state

b63 said:
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
Click to expand...
Click to collapse
Recovery shows my battery level to be at 53%. I've got it on the charger now, but I have a feeling there is something else going on.
Also, I am unable to mount my Fire's SD to my computer in recovery. It looks like it is working, but my computer never acknowledges it.

maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer

b63 said:
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
Click to expand...
Click to collapse
Thanks for the reply. Is adb required to get into fastboot? The problem is that I am unable to get into adb because my computer only sees the Fire for about 1 second. When I go into device manager, I don't see it at all.
EDIT: Yeah, I see the mount in TWRP, but it does not do anything when I select it.

Hi Im a beginner but Id like to try to help :
In case you become desperate ignore twrp's battery display and try wall charger.
Anorher idea id have is to shut down throughr twrp and start up then instead of rebooting.

ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.

skourg3 said:
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
Click to expand...
Click to collapse
So this time it looks like the installation worked in TWRP, but after reboot now I'm stuck at the CM7 boot screen. This is at least some progress, so when I get home I'll see what I can do.
Sent via my internet connected mobile cellular telephone.

Well, the battery is definitely not the issue. I've been trying to get fastboot, but the problem is the fact that I can not get adb. Has anyone else had issues with getting adb? I've already tried to install the drivers, and that doesn't work.
EDIT: I've tried issuing "adb devices" from the command prompt repeatedly as soon as I hear the ding until it disconnects a second later, but still I have had no luck.
Also, I found this thread in which someone else appears to have had a similar issue to mine.
[Q] New kind of unfixable Super Brick?

at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...

b63 said:
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
Click to expand...
Click to collapse
I can not seem to get fastboot to work either. Does fastboot rely on adb? Or do you just run the .exe file? I tried to run it, and nothing happened.

fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...

b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
Just wanted to let you know I updated the OP with a video showing what is happening to my KF.
Haven't tried that particular rom yet, but I have wiped data and cache and attempted to re-install CM7.

great idea with the video !!!

b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
OK, so I restored my original rooted kindle rom, but I still can't get into fastboot because of the problem I showed in the video. It is doing exactly the same thing, just instead of the CM7 boot screen, it is the Kindle Fire boot screen.
Is is possible to get into fastboot without the computer? Can anyone think of a reason why I would not be able to mount my device in TWRP?

I just want to understand something about fastboot... can you upload and flash roms with it? Or can you only get TWRP / FFF with it? I ask because I already have them, and I still can't do anything (mount from inside TWRP doesn't work). Thanks!
Sent via my internet connected mobile cellular telephone.

with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...

b63 said:
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
Click to expand...
Click to collapse
Cool. I just ordered one of SkOrPn's cables, so once I get it I'll be sure to give an update. Thanks for all the help so far!

The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)

foxdog66 said:
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
Click to expand...
Click to collapse
Yep, I've used adb successfully, and it is set up as an environmental variable. I actually installed FFF and TWRP with the KFU. Problem is I think something else is botched; perhaps it is TWRP itself, since I am unable to mount from TWRP. I'll try again when I get home.
Sent via my internet connected mobile cellular telephone.

[Q] N4 will not boot, have tried flashing stock

This problem was originally caused when cyanogenmod was not allowing me to change APN settings, so i used the WugFresh toolkit to flash stock and unroot. During the process, the command line hung at "writing system" for over 2 hours and i ended up closing the window, and of course, now my phone will not boot.
I have tried to use the flash stock + unroot option in WugFresh 3 or 4 times since then and every time it gets stuck at 'writing system'. I have also used a guide on android central (I can't link it because its my first post) guide to manually flash the stock ROM twice, but alas the phone still wouldn't boot. I'm stuck and would love any assistance you can offer, thank you.

don't bother. i have shot down my nexus several times with toolkits. i don't trust it anymore.
go here:
https://developers.google.com/android/nexus/images#occam
and download the nexus 4 image (occam).
unpack the zip file, throw in fastboot.exe and adb.exe from that wugfresh thing. needs a couple of dll's as well. when in doubt just copy all dlls.
then boot into fastboot, connect to usb and run the batch file.
in a few seconds you're back to stock. isn't it great to own a nexus.
next time, learn how to use fastboot. its a simple tool with 4-5 command line parameters. you can look into googles batch file to learn how its done.
basically you just need one command anyway, the one that lets you flash a custom recovery. once you have that you're done-

This is why I never use toolkits. It's great that you want to root and flash, but make sure you know how to get back to stock manually on any device before changing what isn't meant to be changed. With that being said, the guide on Android Central should work. My only suggestion is to try it without doing the "fastboot erase" commands. Make sure the files you are flashing are in the same folder as your adb.exe and fastboot.exe, and try again. After you run "fastboot –w update image-occam-jdq39.zip" your phone should reboot itself and you should be on your way. Good luck.

Thanks a lot for the reply, I did what you said and the process completed saying it was successful, but unfortunately my phone still wont boot. I really have no idea what's going on here.
edit: should i try clearing the dalvik cache before running the batch file?

frosty115 said:
Thanks a lot for the reply, I did what you said and the process completed saying it was successful, but unfortunately my phone still wont boot. I really have no idea what's going on here.
edit: should i try clearing the dalvik cache before running the batch file?
Click to expand...
Click to collapse
Boot into recovery and clear cache.

Booted into recovery, cleared dalvik, cleared cache, and did a factory reset. I ran the batch file and the command line is now hanging at 'writing system' again, what could be causing this issue?

do you run windows 8?
i had the same happen to me because that awful thing prevented the drivers from installing correctly. it was weird because fastboot basically responded but the it didn't or it hung.
if you do run that, theres a convoluted way where you boot into some sort of menu and go through all the options until it lets you install drivers correctly. then fastboot finally worked.
anyway - dont worry, as long as you reach fastboot mode your phone is fine. in the worst case you'll have to do it on your friends computer.

Nah i'm still running windows 7, haven't felt the need to upgrade to 8 yet. Alright i'll see if i can reinstall the drivers or use different drivers.
I've downloaded a driver from that android central guide, but i'm not entirely sure how to install it. Its just a zip file with 2 .inf files and 2 .cat files and 2 folders
Thanks for the help you've been awesome!

Fixed it, i reinstalled the drivers and used a USB 2.0 port and everything worked perfectly!

[Q] TWRP no OS installed, can't connect to PC

Hello,
I just got the OTA message for 4.4 and tried to install it but I got a bootloop. After clearing the cache and performing a factory reset in TWRP (which got installed through Nexus Toolkit) it still didn't work. Someone told me to perform a complete format through TWRP which I did (hindsight, I know) and now TWRP says I have no OS installed, adb won't see my device (I have the drivers installed) and when I go into the bootloader (which says FASTBOOT MODE) fastboot still won't recognize the device (nothing shows up on my PC either but that can be normal).
I'm at my wit's end here, is there anyone who can help me?

You need to realize that if you want to install OTA, you need to use stock recovery. Even though it is possible to flash through TWRP, it can still run into problems. Especially when you made root modifications to your device.
You don't have to do a full wipe for everything. There is a method to flash factory firmware without wiping data (link in my signature). After that if it still don't boot due to existing data, boot into a custom recovery and do a factory reset without wiping the internal storage.
But since you have custom recovery already, just go into the Development section, find a stock KitKat rom, download it and sideload it using TWRP (which is enabled it in the Advance menu).

eksasol said:
You need to realize that if you want to install OTA, you need to use stock recovery. Even though it is possible to flash through TWRP, it can still run into problems. Especially when you made root modifications to your device.
You don't have to do a full wipe for everything. There is a method to flash factory firmware without wiping data (link in my signature).
But since you have custom recovery already, just go into the Development section, find a stock KitKat rom, download it and sideload it using TWRP (which is enabled it in the Advance menu).
Click to expand...
Click to collapse
Yes I've tried that but I don't know how to sideload it. adb doesn't see my device, fastboot doesn't either and windows doesn't recognize the device (although I have the adb naked drivers installed).

fverswijver said:
Yes I've tried that but I don't know how to sideload it. adb doesn't see my device, fastboot doesn't either and windows doesn't recognize the device (although I have the adb naked drivers installed).
Click to expand...
Click to collapse
If it is connected adb should see your device while in TWRP. Fastboot only work in fastboot mode (bootloader screen), not in recoveries. If you have the UND installed then they both should work, if not it wasn't installed correctly. If you are using Windows 8 you need to disable driver signature before you can install UND (search google for that).
You could also make a bootable Ubuntu flashdrive, and use the ADB/Fastboot for Ubuntu link in my signature to install them.

eksasol said:
If it is connected adb should see your device while in TWRP. Fastboot only work in fastboot mode (bootloader screen)
Click to expand...
Click to collapse
I tried both. ADB devices gives me an empty line and fastboot devices (when in bootloader screen) gives me nothing at all. I've tested 2 different computers (both windows 7 x64) and it still won't detect it. When in TWRP windows tries to detect my device but it says "Unknown Device" and gives the yellow triangle.

fverswijver said:
Yes I've tried that but I don't know how to sideload it. adb doesn't see my device, fastboot doesn't either and windows doesn't recognize the device (although I have the adb naked drivers installed).
Click to expand...
Click to collapse
You might have to point the drivers to your phone. If you go into device manager, see if your Nexus 4 has an error. If it does, right click it, and then update the driver. Do a manual install, and point it to the .ini file for the driver

fverswijver said:
I tried both. ADB devices gives me an empty line and fastboot devices (when in bootloader screen) gives me nothing at all. I've tested 2 different computers (both windows 7 x64) and it still won't detect it. When in TWRP windows tries to detect my device but it says "Unknown Device" and gives the yellow triangle.
Click to expand...
Click to collapse
Fix your drivers, uninstall them and select the checkbox to delete the driver files, search Google on how to disable driver signature and try reinstalling the driver again.
or
Make a bootable Ubuntu flashdrive, and use the ADB/Fastboot for Ubuntu link in my signature to install them.

eksasol said:
Make a bootable Ubuntu flashdrive, and use the ADB/Fastboot for Ubuntu link in my signature to install them.
Click to expand...
Click to collapse
I did this and still the same, adb gives an empty list and fastboot gives nothing.

fverswijver said:
I did this and still the same, adb gives an empty list and fastboot gives nothing.
Click to expand...
Click to collapse
Try using a different cable and on different computers.

eksasol said:
Try using a different cable and on different computers.
Click to expand...
Click to collapse
I've tried 3 different computers, 2 different OSes and 3 different cables. Nothing seems to work. I'm really starting to panic now.

fverswijver said:
I've tried 3 different computers, 2 different OSes and 3 different cables. Nothing seems to work. I'm really starting to panic now.
Click to expand...
Click to collapse
Just to clarify, see attachment for the correct name of the device if UND is installed correctly.
If you tried it with Ubuntu, make sure you do the 1st step from here also:
http://bernaerts.dyndns.org/linux/74-ubuntu/245-ubuntu-precise-install-android-sdk

Same here
i installed the ota update normally with twrp installed everything went fine but im kind of disappointed in this update:/

eksasol said:
Just to clarify, see attachment for the correct name of the device if UND is installed correctly.
Click to expand...
Click to collapse
These are my findings:
Ubuntu:
- Bootloader (fastboot)
-- running lsusb in Ubuntu shows no device
- TWRP (adb)
-- running lsusb shows no device
Windows 7 (3 different computers)
- Bootloader (fastboot)
-- Windows gives the following popup, no device listed in Device Manager
- TWRP (adb)
-- Windows gives the same popup as on fastboot and this appears in the Device Manager:

fverswijver said:
These are my findings:
Ubuntu:
- Bootloader (fastboot)
-- running lsusb in Ubuntu shows no device
- TWRP (adb)
-- running lsusb shows no device
Windows 7 (3 different computers)
- Bootloader (fastboot)
-- Windows gives the following popup, no device listed in Device Manager
- TWRP (adb)
-- Windows gives the same popup as on fastboot and this appears in the Device Manager:
Click to expand...
Click to collapse
Is file transfering working atleast? If it is, then it's a software problem. If it isn't, then it could be a hardware problem, you can try replacing the USB charging board for the phone. Also some roms with corrupt files can cause this issues, so try a different roms if you haven't.

File transfer used to work but atm I'm unable to even connect it to a computer so I can't actually transfer any files. If I could I would flash a rom but no files = no flashing.

fverswijver said:
File transfer used to work but atm I'm unable to even connect it to a computer so I can't actually transfer any files. If I could I would flash a rom but no files = no flashing.
Click to expand...
Click to collapse
Get one of these: http://www.ebay.com/sch/i.html?_nkw=nexus+4+usb+charging+port+replacement&_sacat=0
If it don't work, then use the phone as a door stopper.

hey guys, I'm having the same problem here but with a Nexus 5 now.
Its been over a month and I've kind of gave up over the situation.
I couldn't resist to write a comment on the thread, since it appears to be the same problem as mine.
long story short, I decided to order an USB charging port to replace the one on the phone (as my last attempt).
Otherwise I will consider using the device as a door stopper.

Do not despair! Check this out: http://highonandroid.com/android-ro...r-android-in-a-bootloop-with-no-os-using-adb/
http://highonandroid.com/android-roms/how-to-copy-files-over-to-your-android-in-a-bootloop-with-no-os-using-adb/

i installed nokia xl rom into my device un fortunately i wipe the os and later i copy a rom file into my sd card and tried to flash tjat but it showing unable to open the zip. iam stuck with my company logo on the screen. twrp cannot open the zip and flash the rom. please help me in this issue.
thanks in advance

[Q] Slate 7 Extreme root,flash question

Hi, I am a happy owner of the HP Slate 7 Extreme which is basically the same device as you guys are using.I am still on the 4.2 Jelly bean since HP are not pushing over the air updates with our devices.I want to use the script from the development forum "[Script] [Utility] Nvidia Tegra Note 7 Kitkat Unlock BL, Restore, Recovery, & Root", I want to know if anyone has tried to use it with the Slate Extreme or if it simply should work on the Jelly Bean aswell. Thanks guys.

still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2

mofared said:
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
Click to expand...
Click to collapse
What about the 4.3+ ?

crazyhacker202 said:
What about the 4.3+ ?
Click to expand...
Click to collapse
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later

mofared said:
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
Click to expand...
Click to collapse
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571

There was an individual who has received the 4.4.2 update from HP on his Slate Extreme over at the HP forums. I believe he stated he received 20 units donated directly from HP and was wondering why only 1 of them received the update. I believe the reason stated is that he most likely received a non-retail unit by accident. Not sure if he ever dumped the ROM or even knows how. I don't know either otherwise I'd try to contact him to get him to do so.

Re-write recovery partition?
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2

Belmichel said:
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Click to expand...
Click to collapse
See my HP Slate 7 Extreme Root post: http://forum.xda-developers.com/showthread.php?t=2850893

What am I supposed to open updater-script with?
---------- Post added at 03:47 AM ---------- Previous post was at 03:31 AM ----------
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
---------- Post added at 04:25 AM ---------- Previous post was at 03:47 AM ----------
I downloaded a script editor and deleted the first three lines of updater script but it still fails to flash.

Finally success!
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I have the 4450 extreme and one the things that was a little different- is that I had put the update zip on the sd card prior and it did the update on its own... WEIRD but acceptable! rooted and on 4.4.2- thanks man!

I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot (previously this): This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk (Previously this): The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip (previously this): A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt (previously this): A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.

It Worked! But...
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
I was able to unlock my bootloader using the above method and it worked. My s7e rebooted and everything was working normally. I loaded the bootloader again to go in and do a cache wipe and my 3 year old bumped into me as I was holding down the volume+ and power buttons. Now I'm stuck in ADX mode (black screen but recognized by my pc, have tried connecting to charger, volume+ and power, volume - and power, nothing works) . I've read that Advent has released adx files for the Vega Note 7 and you can use Tegra Note 7 Super Tools to restore the Nvidia Note 7. I'm wondering if I can use the update.zip file and the nvflash files from Nvidia to restore my tablet from ADX mode.
Any suggestions?

Mike-S, Thanks for the in depth how-to. I tried to sell my Extreme 4450 and the guy that I sold it to said when he received it was in boot loop. I got it back and it is indeed the one I sent him, however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling. I almost seems like the recovery was wiped... I can get to uploading from SD and have tried using your info to accomplish with no success. Any suggestions? I hate to smash it or try and sell if I can fix it.
Thank you in advance for anyone's help

som1special2 said:
however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling.
Click to expand...
Click to collapse
Damn, I'm sorry to say that I'm unsure if i'll be able to help much or at all. All i can suggest is look and see if there is any pre-boot subsystem that connects to your pc via usb, similar to the mediatek "preboot mt65xx" which can sort of provide a last gasp chance of recovery.

help with ROM
Hi there,
Need desperate help. I followed the instructions here but ended up with no OS in the s7e. I kept on trying to install a signed ROM via ADB, it reaches 100% senidng but always failed inside TWRP. Not succesful even with CWM. I even tried installing from SD card but no success. Please help, thank you.

Anyone still around here?
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ

MGrad92 said:
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
Click to expand...
Click to collapse
Get your device drivers right (try androidsdk if it's still not getting recognised) and fastboot the stock system images (fastboot is not root dependent). By the way why were you trying those weird rooting methods ??? Just flash supersu from cwm/twrp and be done with it.

Thanks ... I'll try androidsdk. I actually am a root n00b and so I was trying to figure out the simplest way to go. I guess I guessed wrong! But of course before I can get that working I need the right drivers ... So I'll try that first. I was thinking the drivers were OK since my PC recognized the S7E when Android loaded (before it crashed to the white screen).

Couldn't get androidsdk to work
Hello again... I never could get androidsdk to work. My computer never recognized the tablet to be able to fastboot. *sigh* As much as I hate to give up, I don't know what else to do.... I might try another PC?

Looking for update.zip for S7E
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
Hey Mike, you wouldn't still happen to have that signed update.zip since you've don't have it on Dropbox anymore?

sudden bootloop (can't get into recovery mode) n I didnt update to android 7,

so there I was in my car, my phone plugged in via aux cable and playing some music
suddenly I notice the music stops and my phone goes into a reboot,
I was using a pure nexus rom on marshmallow ( the latest marshmallow one i believe) and had xposed, and sometimes my phone would randomly reboot,
it was annoying but I could live with it
so i thought it was having another one of it's moment
but now it doesn't actually reboot,
my phone is stuck in a reboot loop and I can't even get into recovery mode, (I had TWRP installed and could boot into it numerous times before this)
anyone have any ideas?
I've installed twrp via fastboot
but I can't use the adb command to boot into recovery since device is not found,
when i try
adb devices
the list is empty,
and yes I've installed the latest google drivers via android studio
I've installed hi-suite
someome please help

jay0514 said:
so there I was in my car, my phone plugged in via aux cable and playing some music
suddenly I notice the music stops and my phone goes into a reboot,
I was using a pure nexus rom on marshmallow ( the latest marshmallow one i believe) and had xposed, and sometimes my phone would randomly reboot,
it was annoying but I could live with it
so i thought it was having another one of it's moment
but now it doesn't actually reboot,
my phone is stuck in a reboot loop and I can't even get into recovery mode, (I had TWRP installed and could boot into it numerous times before this)
anyone have any ideas?
I've installed twrp via fastboot
but I can't use the adb command to boot into recovery since device is not found,
when i try
adb devices
the list is empty,
and yes I've installed the latest google drivers via android studio
I've installed hi-suite
someome please help
Click to expand...
Click to collapse
Hi... You can't use adb commands while in bootloader... Only fastboot commands. Use the volume rocker till you see recovery mode displayed and press power button. If it still bootloop, try formatting cache and data with fastboot in bootloader and reboot in recovery again. If it still bootloop. Finally try fastboot flash a stock Google image. If none of these steps work, your phone is probably dead and you'll have to try to RMA your N6P.
Check this thread for further infos: https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528/page21

5.1 said:
Hi... You can't use adb commands while in bootloader... Only fastboot commands. Use the volume rocker till you see recovery mode displayed and press power button. If it still bootloop, try formatting cache and data with fastboot in bootloader and reboot in recovery again. If it still bootloop. Finally try fastboot flash a stock Google image. If none of these steps work, your phone is probably dead and you'll have to try to RMA your N6P.
Check this thread for further infos: https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528/page21
Click to expand...
Click to collapse
ohhh i see
yeh I dones't let me get to the recovery mode in the options from bootloader
and what are the commands to format cache and data in fastboot??

5.1 said:
Hi... You can't use adb commands while in bootloader... Only fastboot commands. Use the volume rocker till you see recovery mode displayed and press power button. If it still bootloop, try formatting cache and data with fastboot in bootloader and reboot in recovery again. If it still bootloop. Finally try fastboot flash a stock Google image. If none of these steps work, your phone is probably dead and you'll have to try to RMA your N6P.
Check this thread for further infos: https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528/page21
Click to expand...
Click to collapse
and im trying to flash a stock google image
im following steps from the official android page
but how do I execute a .sh file?
the instruction is to go to the folder with files and execute 'flash-all.sh'

jay0514 said:
and im trying to flash a stock google image
im following steps from the official android page
but how do I execute a .sh file?
the instruction is to go to the folder with files and execute 'flash-all.sh'
Click to expand...
Click to collapse
First try:
fastboot format cache
fastboot format userdata
If the above doesn't solve your issue it's probably dead...
Check this thread for factory image flashing tutorial: https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page552
Good luck...

5.1 said:
First try:
fastboot format cache
fastboot format userdata
If the above doesn't solve your issue it's probably dead...
Check this thread for factory image flashing tutorial: https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page552
Good luck...
Click to expand...
Click to collapse
followed the guide to install stock rom,
still in reboot loop
how can a fine phone just die suddenly? :S

jay0514 said:
followed the guide to install stock rom,
still in reboot loop
how can a fine phone just die suddenly? :S
Click to expand...
Click to collapse
Sorry... Known issue with the N6P... Have you checked the tread I linked you in my first answer?
Good luck...

jay0514 said:
and im trying to flash a stock google image
im following steps from the official android page
but how do I execute a .sh file?
the instruction is to go to the folder with files and execute 'flash-all.sh'
Click to expand...
Click to collapse
Fastboot flash-all.sh is for Mac computers so presumably you have a Mac. Flash-all.bat is for windows. You need to unzip the Google image and move everything into the same folder where you have the fastboot program. Just open a command prompt window inside that folder and type the command. That's how I do it in Windows. Presumably the process is similar with a Mac. You will still have a zipped archive after you unzip the Google image but you want to leave that one as is. So far flashing flash-all.bat has gotten me out of every boot loop I've gotten into on my 6P but my phone never spontaneously bootlooped. I was always doing something (updating a rom, trying to restore a nandroid backup) that resulted in a bootloop. The fact that your phone boot looped without warning is probably a bad sign. If you still have warranty I would try to flash stock and see if you can RMA phone. If that isn't possible you might want to try staying on stock or using a different rom and seeing if the random reboots still occur. Good luck.

Well that really sucks. Sorry for your loss but it is a long running phone failure problem. I'm on my second 6P because this. Even worse to me is the fact your were running almost the exact same setup I am now. I refrained from running 7.x.x to try and minimize my chances of another BLOD so now w4on knows what to do. Lol
Sent from my Nexus 6P using XDA-Developers Legacy app